THOMSON THS220 User manual

Look, Listen & Live
www.thomsonstb.net
User manual
Bedienungsanleitung
Manuel d’utilisation
Manuale d’uso
Руководство
пользователя
THS220
Digital High
Definition
Satellite
Receiver

P1
English
TABLE OF CONTENTS
1.0 INSTRUCTION 2
1.1 Safety Instructions 2
1.2 Storage 2
1.3 Equipment Set-up 3
1.4 Accessories 3
1.5 Usage of external USB devices 3
2.0 YOUR RECEIVER 4
2.1 PIN code default: 0000 4
2.2 Front panel 4
2.3 Rear panel 4
2.4 Remote Control 4
2.5 Installing the Batteries 6
2.6 Using the remote control 6
3.0 CONNECTIONS 6
3.1 Basic connection using a Scart cable 6
3.2 Basic connection using an HDMI cable 6
3.3 Connecting multiple fixed LNBs using a DiSEqC 1.0 switch 7
4.0 FIRST TIME INSTALLATION 7
4.1 Installation 7
5.0 QUICK GUIDE FOR USING YOUR RECEIVER 8
6.0 OPERATION 8
6.1 Changing channels 8
6.2 Info Banner 9
6.3 Selection of audio language 9
6.4 Teletext 9
6.5 Subtitles 10
6.6 Changing the Aspect Ratio 10
6.7 Changing the resolution 10
6.8 EPG (Electronic Programme Guide) 10
6.9 Favourite channels 10
6.10 Changing between DTV/VCR contents 10
7.0 MAIN MENU 11
7.1 Programme 11
7.2 Picture 13
7.3 Channel Search 14
7.4 Time and Date Settings 17
7.5 Option 18
7.6 System Settings 19
7.7 USB 20
8.0 TROUBLESHOOTING 23
9.0 SPECIFICATIONS 24
03 Jul 2013 14:47
THOMSON declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EC
and 73/23EEC; RoHS 2002/95/EC
Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products
may change. All product names are trademarks or registered trademarks of their respective owners.
© THOMSON 2012. All rights reserved.

P2
INSTRUCTION
1.0 INSTRUCTION
1.1 Safety Instructions
DO NOT INSTALL YOUR RECEIVER:
 In a closed or poorly ventilated cabinet; directly on top of or under any other
equipment; on a surface which might obstruct the ventilation slots.
DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES:
 To direct sunlight or any other equipment that generates heat; to rain or intense
moisture; to intense vibration and to any shock which may cause permanent
damage to your receiver or to any magnetic objects, such as loudspeakers,
transformers, etc.
 Do not use a damaged power cord. It may cause a fire or an electric shock. Do not
touch a power cord with wet hands. It may cause an electric shock.
 When the receiver is not used for a long period of time, you should unplug the
power cord from the wall socket.
 Do not use alcohol or ammonia based liquids to clean the receiver. If you wish, you
may clean your receiver with a soft lint-free cloth slightly made damp with a mild
soap solution, and only after disconnecting from the mains voltage supply. Make
sure no foreign objects fall through the ventilation slots because this could cause
fire or an electric shock.
 Do not place any objects on top of the receiver because this might prevent proper
cooling of the components inside.
Safety Precautions
 Never try to open the receiver. It is dangerous to touch the inside of the receiver
due to high voltages and possible electrical hazards. Opening the receiver will void
the warranty of the product. Refer all maintenance or servicing to suitably qualified
personnel.
 When you are connecting cables, be sure that the receiver is disconnected from
the mains supply voltage. Wait a few seconds after switching off the receiver before
you move the receiver or disconnect any equipment.
 It is a necessity that you only use an approved extension and compatible wiring
that is suitable for the electrical power consumption of the installed equipment.
Please ensure that the electrical power supply corresponds with the voltage on the
electrical identification plate at the back of the receiver.
If the receiver does not operate normally even after strictly following the instructions
in this user manual, it is recommended to consult your dealer.
1.2 Storage
Your receiver and its accessories are stored and delivered in a packaging designed
to protect against electric shocks and moisture. When unpacking it, make sure
that all the parts are included and keep the packaging away from children. When
transporting the receiver from one place to another or if you are returning it under
warranty conditions, make sure to repack the receiver in its original packaging with

INSTRUCTION
P3
English
its accessories. Failing to comply with such packaging procedures could damage
the product and void your warranty.
1.3 Equipment Set-up
We recommend you consult a professional installer to set up your equipment.
Otherwise, please follow the instructions below:
 Refer to the user manual of your TV and your antenna.
 Make sure that the SCART/HDMI cable and outdoor components are in a good
condition and the SCART/HDMI connections are well shielded and from good
quality.
This manual provides complete instructions for installing and using this receiver. The
following symbols will serve as follows.
WARNING: Indicates warning information.
NOTE: Indicates any other additional important or helpful information.
MENU Represents a button on the remote control or the receiver.
(Bold Characters)
Move to Represents a menu item within a window.
(Italic Characters)
1.4 Accessories
 1 User Manual
 1 Remote control unit
 2x Batteries (AAA type)
NOTE: The batteries should not be recharged, disassembled, electrically
short-circuited or be mixed or used with other types of batteries. If rechargeable
accumulators instead of batteries are going to be used, we recommend using
(e.g. NiMH) types with low self-discharge to ensure long time operation of remote
control.
1.5 Usage of external USB devices
 It is recommended to use USB 2.0 storage devices. If your device is not
compatible to USB 2.0 specifications, multimedia functions of the receiver might
not work properly.
 THOMSON cannot guarantee compatibility with all types of USB storage devices.
 It is advised not to store important information on USB storage devices used with
the receiver. Always make backups of data on your USB storage device before
using it with this receiver. THOMSON will not take responsibility for any loss of
information or circumstances caused by loss of information.
 Please ensure that either the USB device is already formatted to FAT/FAT32, or
format the USB device via your receiver, refer to chapter 7.7 USB for details.

P4
YOUR RECEIVER
2.0 YOUR RECEIVER
2.1 PIN code default: 0000
2.2 Front panel
Fig. 1
1. Standby/on button: To turn the unit ON or to standby mode.
2. Channel up/down To change channels without using the remote
control
3. Volume up/down To change volume without using the remote control
4. Remote control sensor: Receives the signal from the remote control
5. Standby indicator: Shows power state of the receiver
Green LED - receiver is turned on
Red LED - receiver is in standby mode
6. LED display: Shows channel number in operation and time in
Standby
7. USB For connection of external storage devices
2.3 Rear panel
Fig. 2
1. SAT IN To connect to the LNB of your satellite dish for
reception of satellite broadcast signal
2. SAT OUT To loop through the satellite signal to a second
receiver
3. S/PDIF To connect to a digital or home cinema audio
amplifier
4. HDMI To connect to the HDMI input of your TV using a
good quality HDMI cable.
5. TV SCART To connect to TV using a SCART cable
6. DVD/VCR SCART To connect to a Video or DVD recorder
7. Power cord The receiver requires a mains voltage of 100~240V
AC 50~60Hz (auto selecting). Please check the
local power conditions before connecting the
receiver to the mains supply.
2.4 Remote Control
Fig. 3
1. q Turns the receiver ON/standby
2. ! To turn the sound on or off
3. RED Alphabetic search of channels in channel list
mode; several functions in the OSD menu
and Teletext
4. GREEN In viewing mode: changes the resolution of the
HDMI output between 1080p, 1080i, 720p, 576p
and 576i; several functions in the OSD menu
and Teletext.

YOUR RECEIVER
P5
English
5. YELLOW In viewing mode: changes the aspect ratio and
aspect conversion of video outputs; several
functions in the OSD menu and Teletext
6. BLUE In viewing mode: displays the schedule menu for
easy setup of timers; several functions in the OSD
menu and Teletext.
7. SUBTITLE To select one of the available subtitles languages
for the current channel
8. TEXT To open Teletext if available on the current channel
9. AUDIO Displays the audio selection menu for available
languages and audio modes
10. RECALL To switch between the last viewed channels
11. 5 Searches backwards during playback. Each
pressing increases the speed (x2 – x32)
12. 6 Searches forwards during playback. Each pressing
increases the speed (x2 – x32)
13. 7 Jumps to the previous file during playback
14. 8 Jumps to the next file during playback
15. u Starts/resumes playback
16. 2 Freezes/resumes playback of multimedia files
17. 3 Stops playback of multimedia files
18. REPEAT Selects different repeat modes during playback
19. MENU To open the main menu in viewing mode or to go
one step back in the menu
20. EXIT Go one step back in the menu/cancellation
of current process/exit from the main menu to
viewing mode
21. pq Switches to the next/previous channel in viewing
mode, switches to the next/previous page in the
channel list or moving the highlight up/down in
the menu.
22. OK Viewing mode: displays the channel list. Menu:
activation of the highlighted item
23. tu Decreases/increases the volume level in viewing
mode/navigating through the menus/changing
values of settings in a menu
24. EPG Viewing mode: displays the EPG (Electronic
Programme Guide)
25. Press once to display channel number/name
and current/next info. Press twice to display
detailed event info and transponder/signal strength
information. Press again – back to viewing mode
26. VOL+/- Increases/decreases the volume level in TV mode
27. FAV To access your favourite channels. Toggles
between available favourite groups

P6
CONNECTIONS
28. GOTO In playback mode: opens the time banner for
selecting the moment where to jump to
29. P +/- Switches to the previous/next programme in
TV mode
30. DTV/VCR Switches to VCR input if the receiver is in DTV
state. Switches to DTV if it is in VCR state
31. 0-9 Channel number and numeric value input
32. TV/RADIO Toggles between TV and radio mode
2.5 Installing the Batteries
Fig. 4
Remove the battery cover from the remote control and put 2x AAA size batteries
inside the compartment.
The diagram inside the battery compartment shows the correct way to install
the batteries.
1. Open the cover
2. Install batteries
3. Close the cover
NOTE: The batteries should not be recharged, disassembled, electrically
short-circuited, be mixed or used with other types of batteries.
2.6 Using the remote control
Fig. 5
To use the remote control, point it towards the front of the digital receiver. The
remote control has a range of up to 7 metres from the receiver, if properly aligned
towards the IR eye on the front panel.
The remote control will not operate if its path is blocked.
NOTE: Sunlight or very bright light (such as TL lighting) might decrease the
sensitivity of the remote control.
3.0 CONNECTIONS
3.1 Basic connection using a Scart cable
Fig. 6
a. Connect the LNB of your satellite antenna to the SAT IN connector of your
receiver using a good quality coax cable and suitable ‘F-connector’ plugs.
b. Connect one end of a good quality Scart cable to the TV SCART connector on
your receiver and the other end to the SCART input of your TV.
c. Plug the power cord to a suitable wall outlet.
3.2 Basic connection using an HDMI cable
Fig. 7

FIRST TIME INSTALLATION
P7
English
a. Connect the LNB of your satellite antenna to the SAT IN connector of your
receiver using a good quality coax cable and suitable ‘F-connector’ plugs.
b. Connect one end of a good quality HDMI cable to the HDMI output on your
receiver and the other end to the HDMI input of your TV.
c. Plug the power cord to a suitable wall outlet.
3.3 Connecting multiple fixed LNBs using a DiSEqC
1.0 switch
Fig. 8
a. Connect the LNBs of your fixed antenna to the inputs of a DiSEqC 1.0 switch
b. Connect the output or “to receiver” connector of the DiSEqC 1.0 switch to the
SAT IN connector on your receiver.
c. Refer to section 3.1 or 3.2 for TV and mains connections.
4.0 FIRST TIME INSTALLATION
After all connections have been made properly, turn on your TV and make sure the
receiver is connected to the main power. If you are using the receiver for the first
time or restored it to factory default, the First Installation menu will appear on your
TV screen. Use the tu buttons to select the OSD Language of your preference
and press OK to confirm. An Info page will be displayed. Read the info guide and
press the button to proceed to the next Installation step. You can open and close
the info page again by using the button.
NOTE: If German is selected as language, German preset channels from
ASTRA 19.2E will be installed. You can continue with the Installation
menu to scan and install further channels as described below or
directly go to viewing mode by pressing the EXIT button twice to
start enjoying the pre-installed channels immediately.
4.1 Installation
4.1.1 Satellite Selection
Use pq to highlight the satellite your dish is aimed at. When using a multi feed
antenna with more than 1 LNB, select the satellites your antenna is adjusted for by
pressing the OK button and set the LNBs in the DiSEqC point. The scan process
will then search on all selected satellites.
4.1.2 Signal Adjust
The signal quality bar on the bottom of the screen allows you to fine tune the
alignment of your antenna for optimum reception. Adjust your antenna for maximum
possible signal quality. When the signal cannot be improved anymore, fix the dish
on this position and press the BLUE button for Scan.

P8
QUICK GUIDE FOR USING YOUR RECEIVER
4.1.3 Scan Mode
Use pq tu to highlight your options of choice and press OK to start the
Channel Search. It is recommended to use the default settings.
4.1.4 Channel Search
Your receiver will now perform an automatic channel search. When the process has
been completed, all found channels will be stored and the receiver will switch to the
first channel in the channel list. You are now ready to enjoy your new receiver.
NOTE: If no channels were found during the automatic channel scan, the
receiver will return to the First Installation menu. Please select your
language again and refer to chapter 7.3 for further instructions.
5.0 QUICK GUIDE FOR USING YOUR RECEIVER
We at THOMSON understand that you can’t wait to enjoy your new HD receiver.
The following quick guide will make you familiar with the basic operation of this
device. We do, however, advice you to read the full manual to get the best
performance from your THOMSON HD receiver.
To turn your receiver ON or to standby, use the q button on the remote control or
the button on the front panel.
Choose a channel with the pq buttons. Alternatively, you can digit the channel
number with the 0~9 buttons on the remote control or press OK in viewing mode to
display the channel list.
The volume can be adjusted with the tu buttons.
6.0 OPERATION
In viewing mode, several features are available to make watching TV a true
pleasure. This paragraph describes these features. Please also read chapter 7 to
get familiar with the menu of your new receiver.
6.1 Changing channels
There are different ways to change channels with your new receiver.
Via direct access
Via the channel list
Via the pq buttons.
Via the RECALL button.
6.1.1 Direct access
To gain direct access to a certain channel, simply input its number with the 0~9
buttons on the remote control. Channel numbers can be up to four digits long.
Entering a number with less than four digits is possible. Just wait a few seconds
and your receiver will switch to the selected channel.

OPERATION
P9
English
6.1.2 Channel list
Press OK in viewing mode to display the channel list. Use pq to highlight your
channel of choice and press OK once to select the highlighted channel. The
channel list is equipped with a Find function to make it easier to find a certain
channel. Press RED in the channel list. An alphabet banner will now be displayed.
Use pq to select the first letter (or letters) of the channel and OK to confirm.
All channels beginning with the chosen letter(s) will now be displayed. Close the
alphabet banner by moving the highlight to OK. Now press OK and select the
channel in the filtered list.
The following buttons are available in the channel list and viewing mode:
RED: Opens an alphabet banner for quickly finding a channel
TV/RADIO: Toggles between TV and radio channels
GOTO: Opens the Satellite List for satellite selection
In viewing mode:
FAV: To switch to one of the available favourite lists.
6.1.3 Using the pq buttons
p will switch to a higher channel.
q will switch a lower channel.
6.1.4 Using the RECALL button
Use the RECALL button for switching between the last viewed channels. Please
refer to section 7.6 for more details.
6.2 Info Banner
At any time during viewing mode you can press the button to get information
about the current channel as well as the current and following programme*. Press
twice to view detailed info on the current and following programmes and technical
details about the current channel. Press again or EXIT to close the information.
You can change the on screen duration of the info banner in the Option menu.
Please refer to section 7.5 for more details.
*Programme information is displayed when available. Availability depends on broadcast.
6.3 Selection of audio language
Some channels support a choice of different audio formats and/or languages. To
select another audio stream, press AUDIO in viewing mode. A list with available
audio streams will now be displayed. Use pq to select a stream and confirm
with OK. With the tu buttons you can select between mono left, mono right or
stereo audio.
6.4 Teletext
Your receiver includes a fully featured Teletext. To access Teletext, press the TEXT
button in viewing mode and use the 0~9 or pq buttons to select the number of
the page you want to see. Subpages (if loaded and available) can be selected with
the tu buttons. The coloured buttons of the remote control allow you to jump to

P10
OPERATION
selected pages directly, as indicated on the bottom of the teletext screen. Press
TEXT again or EXIT to go back to viewing mode.
6.5 Subtitles
Some programmes support a choice of different DVB subtitle languages. Press the
SUBTITLE button in viewing mode to display a list of available subtitle languages.
Use pq to select the subtitle language and confirm with OK.
6.6 Changing the Aspect Ratio
To change the Aspect Ratio while watching TV, simply press the YELLOW button in
viewing mode. Each press will switch to the next format. Please refer to section 7.2
for more details.
6.7 Changing the resolution
To change the Resolution while watching TV, simply press the GREEN button in
viewing mode. Each press will switch to the next format. Please refer to section 7.2
for more details.
6.8 EPG (Electronic Programme Guide)
The Electronic Programme Guide is a very useful function that allows you to
watch programme schedules and information on screen. Press the EPG button
to activate this guide (you can also enter the EPG via the menu, too). Use pq
tu to select a channel and RED to move the highlight to the programme list. In
the programme list, use pq to select or scroll through programmes and tu to
display programme information for the next/previous days. Use BLUE to display
detailed information about the selected programme. If there is more than one page
of information, use tu to scroll.
NOTE: Availability of EPG data depends on broadcast.
Booking a programme from EPG
Select a programme as described above. Press OK when you have selected the
programme. This will lead you to the Timer (Schedule) menu. All details are already
filled in for you. Save the timer with OK. To display the list of booked events just
press the BLUE button in the channel list part of the EPG or in viewing mode.
Please refer to section 7.4.1 for more details.
6.9 Favourite channels
Use the FAV button to access your favourite channels and to toggle between
available favourite groups. Please refer to section 7.1.1 for details on how to create
favourite lists.
6.10 Changing between DTV/VCR contents
The receiver has the possibility to loop through the signal from the VCR SCART
input to the TV SCART. This allows you to watch content from the connected DVD
or VCR recorder via the receiver.

MAIN MENU
P11
English
Switching between DTV/VCR modes in operation mode is realized by using the
DTV/VCR button. “AV IN” will be displayed on the front LED when receiver is in
VCR mode. Press the DTV/VCR button again to return to the digital TV content.
Please refer to Loop Through point in section 7.2 for more details.
7.0 MAIN MENU
7.1 Programme
Press MENU and select Programme using the tu buttons. Press OK or the
q button to enter the Programme submenu. Press OK or the u button to edit
programme settings. Press EXIT to exit the menu.
7.1.1 Programme Edit
To edit your programme preferences (lock, skip, favourite, move or delete), please
go to the Programme Edit menu. This menu requires a password upon access.
Enter your password or use the default password '0000' if you did not change it.
Use pq tu to highlight a channel, TV/RADIO to toggle between TV and radio
channel lists and GOTO to select a satellite (if more than one available).
Set favourite programme
Your receiver allows you to store channels in up to 4 favourite lists. Due to the
large number of channels available on satellite nowadays, this can be a very
useful function.
1. Highlight the preferred programme then press the FAV button.
A Favourite Type window will pop up on screen. The following 4 groups are
available: Movie, News, Sport and Music. Please select one (or more) of them.
A star shaped symbol will appear and the programme is marked as a favourite.
Press EXIT to return to the channel list for further selection.
2. Repeat the previous step to select more favourite programmes.
3. To confirm and exit the menu, press EXIT
Disable favourite TV or radio programme
Repeat step 1 described above and select Disable in the Favourite Type window.
View favourite programme
1. Press the FAV to display a list of favourite programmes in normal viewing mode
(no menu mode). While in the favourite list, use tu to switch between available
favourite lists.
2. Select your favourite programme with pq and press OK to switch to it.
3. Now you can select channels from the chosen favourite group only by pressing
pq in viewing mode. If you want to change to the main channel list press OK
in viewing mode and then press GOTO and select All satellites.
Delete a TV or radio programme
1. Select the programme you want to delete and press the BLUE button. A
message will appear. Press OK to delete the programme or EXIT to cancel.
2. Repeat the previous step to delete more programmes.

P12
MAIN MENU
Skip TV or radio programme
1. Select the programme you want to skip and press the GREEN button.
2. The programme will be marked to skip. The receiver will skip this programme
while zapping between programmes in normal viewing mode (in the channel list
mode the skipped channels remain selectable).
3. Repeat the previous step to skip more programmes.
4. To confirm and exit the menu, press EXIT.
Disable a skipped TV or radio programme
Press the GREEN button on the programme marked with the skip symbol.
Move a TV or radio programme
1. Select the programme you want to move, then press the RED button. A move
symbol will appear.
2. Press pq tu to move the programme.
3. Press OK or RED again to confirm the new position.
4. Repeat the steps above to move more channels.
Locking programmes
You can lock selected programmes for restricted view.
1. Select the programme you want to lock, then press the YELLOW button. The
programme is now marked as locked.
2. Repeat the previous step to select more programmes
3. To confirm and exit the menu, press EXIT.
To view a locked programme, you need to enter either the default password '0000'
or your last set password. We recommend changing the default password to one
of your preference. Please refer to chapter 7.6 System for more details.
Disable a locked TV or radio programme
Press the YELLOW button on the programme marked with the lock symbol.
Rename a TV or radio programme
1. Select the programme you want to rename and press the button. A key
table appears.
2. In the key table select a character by using the navigation buttons. Press OK
to enter the character. When you have entered the new name, navigate to the
“OK” button on screen and press OK on the remote control to confirm the
new name.
3. To store the changes and exit the menu, press EXIT.
7.1.2 EPG (Electronic Programme Guide)
Please refer to section 6.8 above.
7.1.3 Sort
Here you can sort your channels in the following order:
Default: Sort the channels in the original order
By Service Name: Sort the channels in alphabetical order (A-Z)
By Frequency: Sort the channels in frequency order (Low-High)

MAIN MENU
P13
English
By Encrypt: Sort the channels from free to scrambled
7.2 Picture
Press MENU, then select Picture. In this menu you can adjust the video settings.
Press pq to select an option and tu to adjust the setting. Press EXIT to exit
the menu.
Aspect Ratio
The default and recommended format is Auto. You can also set the display format
to available settings like 4:3 Full Screen, 4:3 Pan&Scan, 4:3 Letter Box and 16:9
Wide Screen.
4:3 Letter Box: The full 16:9 picture will be displayed on your 4:3 TV set
with black bars above and below the picture.
4:3 Pan&Scan: The centre of the 16:9 picture will be displayed full-screen
on your 4:3 TV
4:3 Full Screen: Combination of Letter-box and Pan&Scan.
16:9 Wide Screen: Select when using a 16:9 TV set.
TIP: You can change the video output format directly from viewing mode
by pressing the YELLOW button on the remote control.
Resolution
If the video does not appear correctly, change the setting. These settings match the
most common settings for HDMI.
480i: for NTSC system TV.
480p: for NTSC system TV.
576i: for PAL system TV.
576p: for PAL system TV.
720p: for NTSC or PAL system TV.
1080i: for NTSC or PAL system TV.
1080p: for NTSC or PAL system TV.
TIP: You can change the video resolution directly from viewing mode by
pressing the GREEN button on the remote control.
TV format
Set the standard corresponding to your TV set. Available options are: PAL
and NTSC.
Video output
This setting is only relevant when the receiver is connected to the TV set via
Scart. Select RGB for the best picture quality or CVBS in case your TV doesn’t
support RGB.
Loop through (VCR to TV Scart)
This option is only relevant if you have a device (video-/DVD-recorder) connected
to the VCR scart connector of your receiver. Its signal will be looped through to

P14
MAIN MENU
the TV scart output of your receiver. Use this option to set the preferred loop-
through mode.
Running mode: The Loop through will be switched off when the receiver is
in standby mode.
Always: The Loop through is always on – in operation and in
standby mode.
Switching between DTV/VCR contents in the operation mode is realized by using
the DTV/VCR button on the remote control. “AV IN” will be displayed on the front
LED display when the receiver is in VCR mode. Press the DTV/VCR button again
to return to the digital TV content.
NOTE: The setting "Always" increases the power consumption in standby
mode. The front panel LED remains green in standby!
7.3 Channel Search
To access the menu, press MENU and select Channel Search. It contains two
options: Installation and DB (Data Base) Management. Select
an option and press OK to enter it. Press EXIT to exit
the menu.
7.3.1 Installation
7.3.2 Satellite Selection
Use the pq buttons to highlight the satellite your dish is aimed at. Its antenna
settings will be shown at the right side. You can enter the right side with the tu
buttons and return to the satellite list with EXIT.
7.3.3 Configure the antenna settings for selected satellite
LNB Type: Press tu or OK to show the list of LNB Types which is
shown as frequencies. You also can enter customized
frequencies with User Single or User Dual at the bottom of
the list. The default setting is Universal LNB (09750/10600)
– the most used on the market.
LNB Power: Use tu to set the LNB power. 13/18V is the setting for a
Universal LNB.
22KHz: Use tu to switch the 22 KHz oscillator signal on or off.
Auto is the setting for a Universal LNB.
Toneburst: To enable or disable the toneburst switcher if available.
DiSEqC1.0: To select the right port from up to 4 (if available) for the
right LNB.
DiSEqC1.1: To select the right port from up to 16 (if available) for the
right LNB.
Motor: If using a motor, use tu to select between DiSEqC1.2
or GOTOX depending on the motor type you use. Then
Press OK to show the menu to set the position or GREEN
for location.

MAIN MENU
P15
English
DiSEqC1.2: Move the motor to the right position for locking the signal
like explained below.
Move Continue: press tu for moving West/East. It will keep moving as
long as the button is hold pressed. Pressing once moves in
1°step.
Move Step (1): press tu for moving West/East in 0.3° step.
Store Position: to store the current motor position for the selected satellite.
Goto Reference: to go to the reference 0° position.
DiSEqC1.3: Select DiSEqC1.3 with the tu buttons. Press GREEN
to setup your location coordinates. A pop-up window will
appear, in which the following settings can be made:
Location: Use tu to select one of the pre-set locations. Choose a
location nearest to you. If you know the coordinates of your
place of residence, you can choose Manual and make the
following extra adjustments:
Longitude Direction: Choose East or West.
Longitude Angle: Use the NUMERIC buttons to enter the coordinate.
Lattitude Direction: Choose North or South.
Latitude Angle: Use the NUMERIC buttons to enter the coordinate.
Once all setting are made, press EXIT to save the data and leave the window.
Now press OK to enter the DiSEqC1.3 menu.
Move Auto will move the dish to the selected satellite automatically.
For Move Continue, Move Step (1) and Goto Reference please see
explanation above.
7.3.4 Channel Scan
Automatic Scan
Single Satellite Scan: Press BLUE for Scan. A window with scan settings will
be displayed.
Scan Mode: Use tu to select Default, Blind Scan or NetWork.
Default: All stored transponders in the memory will be scanned.
Blind Scan: Slow scan in 2 MHz steps. The receiver will first scan
the whole frequency band to find the transponders it can
lock on. After gathering all transponders, it scans the
transponders one by one to get all available programmes.
NetWork: Network search will be performed – when network
information is broadcasted, new transponders will be found
and stored.
Crytped: Press tu to select All Channels (scrambled and free) or
FTA Channels (free to air);
Service Type: Press tu to select ALL, DTV or Radio.
After configuring, press OK or BLUE again to start scanning with the
selected settings.
Your receiver will now perform an automatic channel search with the scan progress
shown on screen. During the channel search you can skip transponders by
pressing the MENU button, or quit the scan process with EXIT. When the process

P16
MAIN MENU
has been completed, all found channels will be stored and the receiver will switch
to the first found channel.
Multi-Satellites Scan: When using a multi feed antenna with more than 1 LNB,
select the satellites your antenna is adjusted to with the
OK button. The selected satellites will be marked by the "“
symbol. Set the LNB inputs in the DiSEqC point and press
BLUE for Scan. A window with scanning settings will be
displayed. After configuring the settings like explained in
Single Satellite Scan above, press OK or BLUE again to
start Multi-Scan on all selected satellites.
7.3.5 Scanning by transponder (Manual Scan)
Press GOTO for displaying the transponder list of the highlighted satellite. By
pressing GOTO again you switch back to the satellites list.
Single Transponder Scan: Use the pq buttons to highlight the transponder
you want to scan. Press BLUE for Scan. A
window with scanning settings will be displayed.
After configuring the settings (explained in 7.3.1.3
above), press OK or BLUE again to start scanning
the highlighted transponder. When the scan
process has been completed, all found channels
will be stored and the receiver will switch to the first
found channel.
Multi-Transponder Scan: Select the transponders you want to scan with
the OK button. The selected transponders will be
marked with the "“ symbol. Press BLUE for Scan.
A window with scan settings will be displayed.
After configuring the settings like explained in
7.3.1.2 above, press OK or BLUE again to start
multi-scan on all selected transponders.
7.3.6 Satellite Edit options
Add satellites: Press RED to add a new satellite. In the pop-up banner,
enter the satellite's name and position by using the
navigation and numeric buttons.
Satellite Name: Press OK to enter text input mode. In the key table select
a character by using the navigation buttons. Press OK to
input the chosen character. When you have entered the
name, navigate to the “OK” button on screen and press
OK on the remote control to confirm the new name. Save
the settings with OK or cancel with EXIT.
Edit satellites: Press GREEN to edit the focused satellite. For changing
settings see explanation above. Confirm changes with OK
or cancel with EXIT.
Delete satellite: Press YELLOW to delete the focused satellite. Press OK to
confirm deleting or EXIT to cancel.

MAIN MENU
P17
English
7.3.7 Transponder Edit options
Transponders can only be edited when the transponder list is on screen. To do
this, select the satellite you wish to edit and press GOTO to open the TP list. The
options below are now available.
Add transponder: Press RED to add a new transponder. In the pop-up
banner, enter the transponder´s data with the navigation
and numeric buttons. Confirm the settings with OK or
cancel with EXIT. An existing TP cannot be stored again
under the same satellite.
Edit transponder: Press GREEN to edit the highlighted transponder. In the
pop-up banner, change the transponder´s data with the
navigation and numeric buttons. Confirm changes with OK
or cancel with EXIT.
Delete transponder: Press YELLOW to delete the highlighted transponder.
Press OK to confirm or EXIT to cancel.
7.3.8 DB Management
This menu allows you to save and reload the channel data base of your receiver
from/to a USB-device. This very convenient feature enables you to save your
personal settings like Channel-, Favourite-, Sat- and TP-lists on a USB storage
device and load them back to the receiver later. This feature is especially
helpful after unintentional changes or factory reset. In such cases just skip
the First Installation by pressing EXIT in the First Installation and select the DB
management menu.
Connect the USB storage device to you receiver and select one of the options:
7.3.9 Load from USB
Press OK for displaying the list with available DB files (if any stored before). The
DB files „xxxxx.DBM“ are shown with their built date (day and month). Select the
DB file you want to load and confirm it with OK. If DB was loaded successfully
(message appears on screen) the receiver switches automatically to the first stored
channel and shows its content in the background. Press EXIT until the OSD
menu disappears.
7.3.10 Backup to USB
Press OK to make a backup of the data base. A DBM-File „xxxxx.DBM“, with the
current date (day and month), will be created on the USB-device. If DB was stored
successfully, a message will be displayed on screen. Press EXIT until the OSD
menu disappears.
7.4 Time and Date Settings
Press MENU and select Time. In this menu you can adjust the time and
date settings.
Press pq to select an option and tu to adjust the setting. Press EXIT to exit
the menu.