Thundercomm TurboX SDW4100 User manual

Empowering Every IoT Device with Our Technology
Thundercomm TurboX
TM
SDW4100 Development Kits Quick Start
Rev.v0.3
Feb. 2022
service_thundercomm.com
2022-07-06 11:48:21 AM CST

TurboX™ SDW4100 Development Kits Quick Start
Copyright© 2022 Thundercomm Technology Co., Ltd. All rights reserved
Contents
1 INTRODUCTION...........................................................................................................1
1.1 Product Information.........................................................................................1
1.2 SYSTEM OVERVIEW..........................................................................................1
2 Boot Instructions.........................................................................................................2
2.1 Development Environment Installation...........................................................2
2.1.1 adb/fastboot environment ...................................................................2
2.1.2 minicom environment...........................................................................2
2.2 Device Boot Up ................................................................................................3
2.3 Debug Port .......................................................................................................5
3 Download Software And Compile...............................................................................5
4 Download Schematic And Part References.................................................................5
service_thundercomm.com
2022-07-06 11:48:21 AM CST

TurboX™ SDW4100 Development Kits Quick Start
Copyright© 2022 Thundercomm Technology Co., Ltd. All rights reserved.
1
1 INTRODUCTION
1.1 Product Information
There are four SKUs for sale, detailed product information can be found in the upper
left corner of the box.
Product
Model
TPN
Coprocessor
WearableY-DK(ADSP)
WearableY-DK-NA
140019999812
N/A
WearableY-DK(ADSP)
WearableY-DK-EU
140019999914
N/A
WearableY-DK
WearableY-DK-NA
140019999911
3rd Apollo 3B
WearableY-DK
WearableY-DK-EU
140019999913
3rd Apollo 3B
Product information picture sample:
1.2 SYSTEM OVERVIEW
TurboX™ SDW4100 DK (TurboX™ SDW4100 Development Kits) is a customized development
platform based on Qualcomm’s SDW4100 platform, it is mainly aimed at enterprise users
who want to make the watch class. For detailed information, please refer to
Thundercomm_Turbox_SDW4100_DK_User_Manual.
service_thundercomm.com
2022-07-06 11:48:21 AM CST

TurboX™ SDW4100 Development Kits Quick Start
Copyright© 2022 Thundercomm Technology Co., Ltd. All rights reserved.
2
2 Boot Instructions
The Qualcomm Android 8.1 version is installed by default on the SDW4100 DK.
2.1 Development Environment Installation
It needs to install Ubuntu 16.04 on computer.
2.1.1 adb/fastboot environment
$ sudo apt-get install android-tools-fastboot android-tools-fastboot
$ adb version
Android Debug Bridge version 1.0.32
Revision debian
2.1.2 minicom environment
In the debugging development process is the need to print UART log of the CPU, so
there can use minicom tool in Ubuntu.
$ sudo apt-get install minicom
service_thundercomm.com
2022-07-06 11:48:21 AM CST

TurboX™ SDW4100 Development Kits Quick Start
Copyright© 2022 Thundercomm Technology Co., Ltd. All rights reserved.
3
Set the minicom:
$ sudo minicom –s
For details about minicom, please refer to
https://wiki.emacinc.com/wiki/Getting_Started_With_Minicom
2.2 Device Boot Up
Step 1. Connect the battery according to the picture below.
Step 2. Click the PWR_ON button to start the system, and the motor vibrates, and
the penguin logo will be displayed on the screen.
service_thundercomm.com
2022-07-06 11:48:21 AM CST

TurboX™ SDW4100 Development Kits Quick Start
Copyright© 2022 Thundercomm Technology Co., Ltd. All rights reserved.
4
Step 3. After the system is successfully started, the following screen is displayed.
Step 4. When the display is on, holding down the display to enter the system
desktop automatically.
service_thundercomm.com
2022-07-06 11:48:21 AM CST

TurboX™ SDW4100 Development Kits Quick Start
Copyright© 2022 Thundercomm Technology Co., Ltd. All rights reserved.
5
2.3 Debug Port
The USB board contains two micro USB and one JTAG interface:
Plugin the micro USB cable to the USB_DEBUG port, this port is used to identify
adb and Qualcomm Diagnostic port.
If want to print the UART log, it needs to plug in the micro USB cable to the
USB_UART port.
The serial port settings as follows:
3 Download Software And Compile
We provide two source baseline according to different product, the customer should
choose the baseline source code that matches the product which buying.
This part can get documents from www.thundercomm.com website.
Please refer to the Thundercomm_Turbox_SDW4100_DK_Download_SDK_Guide
4 Download Schematic And Part References
Because of some legal restriction, except for the main board schematic diagram can’t
service_thundercomm.com
2022-07-06 11:48:21 AM CST

TurboX™ SDW4100 Development Kits Quick Start
Copyright© 2022 Thundercomm Technology Co., Ltd. All rights reserved.
6
be provided, the rest of the schematic diagram can be download on the website:
https://docs.thundercomm.com/turbox_doc/documents/products/turbox-sdw4100
service_thundercomm.com
2022-07-06 11:48:21 AM CST