Timago TGR-R KT 023B User manual

1
INSTRUCTIONS FOR USE
Folding commode chair
Folding commode chair with wheels
Product code: TGR-R KT 023B / TGR-R KT 023C
1. Characteristics
Folding commode chair is made of powder coated steel frame. The
model TGR-R KT 023B is equipped with height adjustable legs with
anti-sliding rubber tips, while the model TGR-R KT 023C is supplied
with legs with castors, the rear of which are equipped with brake. This
foldable chair is equipped with toilet seat with lid and toilet bucket
with lid which can be taken out easily. Owing to simple folding and
adjustment, the chair can be adjusted to patients’ needs and side
armrests provide stability and safety use.
Elements of the commode chair:
a. Armrests
b. Toilet seat
c. Toilet bucket
d. Height adjustment
e. Anti-sliding tips
f. Castors (rear with brake)
2. Application
The commode chair is ancillary equipment which helps the user to
perform physiological activities. The chair is recommended to people
with dysfunctions and reduced mobility who have problems with
unassisted walking, and for those who lost the ability of unassisted
sitting down and standing up. The chair functions as a toilet owing to
the toilet bucket placed under the seat. The chair facilitates performing
physiological activities and taking care of the user. The castors enable
comfortable sliding onto a toilet after removal of the toilet bucket.

2
3. Assembly
Unfolding and folding
•To unfold the chair, put it on the floor. Grab the plastic handles
and unfold the chair. Assemble the front part of the frame.
•Assemble toilet seat with lid on the rear frame and toilet bucket in
the middle.
•To fold the chair, remove toilet bucket and toilet seat with lid,
lean downwards the front part of the frame, and then, lean one
side forwards and the second side backwards.
Height adjustment
•To adjust the legs, press the metal pin on the leg, select
appropriate height of the inner tube, and then, lock the position
of the tubes relative to each other. The legs are adjustable in
2.5 cm increments.
Note! The pins must be set on the same level. The legs must always
stay stably on the floor.
Usage
Note! While getting on or off the chair, changing the user’s position or
being stationary, the brakes must be absolutely locked (concerns TGR-
R KT 023C).
•Lift the toilet lid and remove the bucket lid. After use, cover the
bucket with the lid and lower the toilet lid.
Note! Remember to empty the toilet bucket after each use.
4. Technical data
Overall width
56 cm
Inner width
46 cm
Overall depth 47 cm
Seat height from the ground TGR-R KT 023B
Seat height from the ground TGR-R KT 023C
46-56 cm
59-69 cm

3
Overall height from the ground
TGR-R KT 023B
Overall height from the ground
TGR-R KT 023C
73-83 cm
89-99 cm
Seat dimensions 38 cm x 40 cm
Chair weight TGR-R KT 023B
Chair weight TGR-R KT 023C
6.5 kg
8.0 kg
Maximum capacity 120 kg
Frame colour grey
5. Notes
Timago International Group does not bear responsibility of improper
use of the commode chair, failure to comply safety regulations and
misuse.
6. Maintenance
Reviews
At least once every three months make a visual inspection of all the
connecting components (latch, hinge) of the product including:
•the condition of the locking pins
•the condition of the castors and brakes
•stability and the look of the frame
Cleaning
Carry out regular maintenance of the technical condition of the chair:
•Clean the commode chair regularly using only water and mild
detergents. Dry thoroughly.
•Do not use for cleaning: strong polishing agents and detergents,
abrasive agents, bleach, petrol or solvents (it may cause frame
damage, visible defects and in consequence - loss of warranty
rights).

4
•Empty and disinfect the toilet bucket and the toilet seat after each
use. Use toilet cleaning agents according to producer’s
instructions.
7. Storage and transport conditions
Device should not be exposed to direct sunlight, water or moisture.
8. Warranty information
All products distributed by our company are covered by a warranty, the
terms of which are described in the warranty card available on our
website. Please contact the retailer from whom you purchased the
product. Please, keep in mind that for warranty purposes, the proof of
purchase (receipt or invoice) should be retained.
9. Labels
Reference
number
Manufacturer
LOT number Manufacture date
Serial number Medical device
Note
Please read the
instruction
The manufacturer checked for compliance with
essential medical devices requirements.
Our complete line of products is available from our distributors.
Learn more at: www.timago.com. Thank you for choosing Timago!

5
Timago International Group
Spółka z o.o. i Spółka – Spółka komandytowa
ul. Karpacka 24/12
43-316 Bielsko-Biała, Polska
T.: [phone]
F.: [phone]
E.: [e-mail]
Rev. II, date 20.05.2021