Timago JMC-C 3201 User manual

1
USER MANUAL
Folding walker
Product code: JMC-C 3201/JMC-C 3202
Dear Customers,
Thank you for purchasing our product. We hope that the equipment you have selected will
meet your expectations. We would like to share some important information with you.
Timago International Group is a Polish company which distributes medical, rehabilitation and
orthopaedic products to pharmacies and medical stores.
Our mission is to ensure your comfort by offering safe, functional, and high-quality products.
We have many years of experience in this sector. Timago products reach a wide range of
users in Poland and throughout Europe through our distributors (medical retailers).
Timago’s company culture promotes openness to your needs. Our goal is to promote safe
and correct use of our products for treatment and rehabilitation in order to improve comfort
and quality of life.
We invite you to access our website for more information: timago.com.

2

3
1. Introduction
Prior to use of our products you should inspect the equipment for any defects which may
have occurred during transport. If this happens, please contact your retailer.
Then, please read this instruction which includes important information for the user.
Please contact us if you have any questions concerning the use of the equipment. Our
advisors will provide you with any information you require on an ongoing basis.
Please note that if you have questions other than those concerning the use of our products,
you should contact your doctor, nurse or physical therapist.
2. Characteristics
Rigid folding walker is made of double reinforced, anodized, aluminium frame and possesses
wide area of support. Soft and foamed handgrips provide proper stabilization and
comfortable use. Owing to adjustable legs, the height of the walker can be adjusted
according to user’s height. Rubber tips prevent the walker from sliding. Folded walker takes
little space, and thus, can be easily stored and transported.
Elements of the walker:
a. handgrip
b. frame folding clip
c. height adjustment – locking pin
d. anti-sliding rubber tips
3. Application
The rigid walker is ancillary equipment designed for people with reduced mobility who need
stable support and help while walking. It is also recommended to the elderly as an aid in
keeping balance, improving walking comfort and ensuring safety from falling. The use of the
walker affects positively on the return to activity of the people with lower limbs diseases and
with locomotion or tilting to erect position problems.

4
4. Assembly and general recommendations for use
Note! Follow the information contained in this manual while assembly and adjustment.
Users with reduced mobility may need help from a third person who has appropriate skills.
Note! Do not use the walker when you notice any visible or perceptible damage (e.g. cracked
frame) due to the risk of accident.
Unfolding and folding
•To unfold the walker, pull the sides apart to the maximum position until the
handgrips are locked.
•To fold the walker, press the plastic element located in the middle on the transverse
frame and fold the sides.
Height adjustment
•The height should be set on such a level that the user, who is leaning against the
handgrips, stands upright, as far as he or she is able to, with his or her shoulders in
rest position and with slightly bent elbows. It is inadvisable to hang on the walker
with all the body weight.
•To adjust the height of legs, press the metal pin, select appropriate height of the
inner tube, and lock the position of the tubes relative to each other. The legs are
adjustable in 2.5 cm increments.
Note! The pins must be set on the same level in each leg.
Note! The assistance of the third person may be required while first use regardless of the
user’s health condition.
•To move with the use of rigid walker, move the walker forwards and slide the legs to
the walker.

5
5. Technical data
Overall width 50 cm
Inner width 45 cm
Overall depth 48 cm
Height adjustment 80-96 cm
Weight 2.7 kg
Maximum capacity 136 kg
Frame colour bronze, silver
6. Notes and recommendations
•Only one person can use the walker.
•Do not stand on the walker.
•Do not hang any objects on the walker due to the risk of accident.
•The walker is designed for users with maximum weight 136 kg.
•The walker is designed to be used on flat surfaces with inclination less than 5%.
•Due to the risk of falling, it is unacceptable to use the walker on wet, icy, greasy,
heavily sandy surfaces as they do not provide firm support.
•Do not make any repairs or modifications by yourself. Any repairs should be done by
qualified personnel of the manufacturer.
•Do not assemble additional wheels as the walkers are not equipped with brakes.
Such action may cause an accident and serious injuries. The manufacturer does not
bear responsibility in this case.
•Do not store the walker in rooms with very high humidity (bath-houses, laundries,
etc.), in the temperature below zero or in the open air.
NOTE! Timago International Group does not bear responsibility of improper use of the
walker, failure to comply safety regulations and misuse.

6
7. Maintenance
Reviews
At least once every three months, make a visual inspection of all the joining components
(latch, hinge) of the product including:
•the condition of height adjustment pins
•stability and look of the frame
•the condition of tubes (if cracks)
Cleaning
•Clean the frame of the walker with damp cloth using only water and mild detergents.
Dry thoroughly.
•Do not use for cleaning: strong polishing and abrasive agents, strong detergents,
bleach, petrol or solvents (it may cause frame damage, visible defects and in
consequence - loss of warranty rights).
•It is essential to remove impurities from moving parts of the walker (hinges, clamping
screws, locks).
8. Warranty information
All products distributed by our company are under a warranty, the terms of which are
described in the warranty card received at the time of purchase.
Please, keep in mind that for warranty purposes, the proof of purchase (receipt or invoice)
should be retained.
As a user friendly company, we only supply products which have been thoroughly tested
with respect to materials, quality and functionality.
Please contact us if you have any questions concerning our servicing procedure.

7
9. Labels
Reference number Manufacturer
LOT number Manufacture date
Serial number
Representative in Euro-
pean Union
Note
Please read the
instruction
The Manufacturer checked for compliance with
essential medical devices requirements.
10. Recommended products
•Products offered by Timago International Group include:
•Orthoses and joint stabilizers
•Manual and special-use wheelchairs
•Walkers and rollators
•Crutches and canes
•Rehabilitation beds
•Ancillary and sanitary equipment
•Anti-decubitus equipment and accessories
•Stabilizing and immobilizing belts
•Electro-medical equipment
•Disposable medical equipment
Our complete line of products is available from our distributors.
Learn more at: timago.com.

8
Manufacturer:
Timago International Group
Spółka z o.o. i Spółka – Spółka komandytowa
ul. Karpacka 24/12
43-316 Bielsko-Biała, Polska
T.: [phone]
F.: [phone]
E.: [email protected]
Issue II, date 29.07.2016