Timago JMC-C 5105 User manual

1
USER MANUAL
Wall shower bench with legs
Product code: JMC-C 5105
Dear Customers,
Thank you for purchasing our product. We hope that the equipment you have selected will
meet your expectations. We would like to share some important information with you.
Timago International Group is a Polish company which distributes medical, rehabilitation and
orthopaedic products to pharmacies and medical stores.
Our mission is to ensure your comfort by offering safe, functional, and high-quality products.
We have many years of experience in this sector. Timago products reach a wide range of
users in Poland and throughout Europe through our distributors (medical retailers).
Timago’s company culture promotes openness to your needs. Our goal is to promote safe
and correct use of our products for treatment and rehabilitation in order to improve comfort
and quality of life.
We invite you to access our website for more information: timago.com.

2
1. Introduction
Prior to use of our products you should inspect the equipment for any defects which may
have occurred during transport. If this happens, please contact your retailer.
Then, please read this instruction which includes important information for the user.
Please contact us if you have any questions concerning the use of the equipment. Our
advisors will provide you with any information you require on an ongoing basis.
Please note that if you have questions other than those concerning the use of our products,
you should contact your doctor, nurse or physical therapist.
2. Characteristics
Shower bench consists of seat made of durable PVC, height adjustable legs with anti-sliding
rubber tips and wallplate. Owing to push button height adjustment, the bench can be
adjusted patient’s height. The bench is made of higher strength materials resistant to
humidity.
The set includes:
•seat with wallplate and adjustable legs with anti-sliding tips
Elements of the bench:
a. wallplate
b. mounting openings
c. seat
d. handle
e. height adjustment – locking pin
f. anti-sliding tips
3. Application
The shower bench is ancillary equipment which helps the user to perform hygienic activities.
The chair is recommended to people with reduced mobility which prevents or hinders the
unassisted performance of daily living activities. The bench can be used in the shower, in the
bath, in bathrooms and other humid rooms at home and in hospitals.

3
4. Assembly and general recommendations for use
Note! Follow the information contained in this manual while assembly and adjustment.
Users with reduced mobility may need help from a third person who has appropriate skills.
Note! Do not use the bench when you notice any visible or perceptible damage (e.g. crack)
as this may cause an accident.
Note! The bench does not contain assembly screws and clamps.
Step 1. Before assembly, adjust the bench to user’s height. To adjust the height, press
locking pin, select appropriate height, and lock the position of the tubes relative to each
other with the use of locking pin. The legs are adjustable in 2.5 cm increments.
Note! The pins must be set on the same level in each leg.
Step 2. Decide and mark the place on the wall where wallplate will be fixed.
Step 3. Bore assembly holes in the wall using drill at the appropriate height and width.
Step 4. Screw wallplate to the wall.
Note! Due to danger, do not use wall shower bench when legs are unstable.
5. Technical data
Seat dimensions 29-48 cm
Height adjustment 38-53 cm
Weight 2.58 kg
Maximum capacity 135 kg
6. Notes and recommendations
•To fold the chair, lift the seat upwards and drop the legs.
•To unfold the chair, use the handle which is at the legs.
•Patients with reduced mobility require help from a third person.
•Do not exceed maximum capacity of the bench (135 kg).
•Do not stand on the bench.
•Do not lean on the bench for purposes other than standing up and sitting down.
•Do not attach any objects to the bench as it may cause an accident.

4
•Only one person can use the bench.
•Remove all potential obstacles in the bathroom and make sure that the floor is flat.
Slippery floor should be secured with e.g. anti-slip mats.
•The bench is designed to be used only on flat surfaces.
•Due to the risk of falling, it is unacceptable to use the bench on surfaces that do not
provide firm support.
•Do not make any repairs or modifications by yourself. Any repairs should be done by
qualified personnel of the manufacturer.
•Do not store the chair in rooms with very high humidity (bath-houses, laundries,
etc.), in the temperature below zero and in the open air.
NOTE! Timago International Group does not bear responsibility of improper use of the wall
shower bench, failure to comply safety regulations and misuse.
7. Maintenance
•Clean the shower chair regularly using only water, sponge and milddetergents for
plastic materials such as soap. Dry thoroughly.
•Do not use for cleaning: strong detergents, abrasive agents, bleach, petrol or
solvents (it may cause frame damage, visible defects and in consequence - loss of
warranty rights).
•At least once every three months check:
-tightening of screws
-condition oflocking pins
-condition oftubes (if cracks)
It isrecommended to check the rubber tips regularly. In case of worn-out, replace the
tips with the new ones.
8. Warranty information
All products distributed byour company are under a warranty, the terms ofwhich
are described in the warranty card received at the time ofpurchase.
Please, keep in mind that for warranty purposes, the proof of purchase (receipt or
invoice) should be retained.

5
As a user friendly company, we only supply products which have been thoroughly tested
with respect to materials, quality and functionality.
Please contact us if you have any questions concerning our servicing procedure.
9. Labels
Reference number Manufacturer
LOT number Manufacture date
Serial number
Representative in Euro-
pean Union
Note
Please read the
instruction
The Manufacturer checked for compliance with
essential medical devices requirements.
10. Recommended products
•Products offered by Timago International Group include:
•Orthoses and joint stabilizers
•Manual and special-use wheelchairs
•Walkers and rollators
•Crutches and canes
•Rehabilitation beds
•Ancillary and sanitary equipment
•Anti-decubitus equipment and accessories
•Stabilizing and immobilizing belts
•Electro-medical equipment
•Disposable medical equipment
Our complete line of products is available from our distributors.
Learn more at: timago.com.

6
Manufacturer:
Timago International Group
Spółka z o.o. i Spółka – Spółka komandytowa
ul. Karpacka 24/12
43-316 Bielsko-Biała, Polska
T.: [phone]
F.: [phone]
E.: [email protected]
Issue II, date 29.07.2016