Timago TGR-R RS 8812 User manual

1
INSTRUCTIONS FOR USE
Walking table with forearm support
Product code: TGR-R RS 8812
1. Characteristics
Walking table with forearm support is made of chromed steel frame. It
is equipped with foamed handgrips, IV stand holder, upholstered
forearm support with smooth height adjustment, removable seat, and
swivel castors with locks.
The set includes:
•Frame with castors
•Upper stabilizing frame
•Lower stabilizing frame
•Forearm support
•Seat
•Locking clips – 4 pcs
•Wing screws – 2 pcs
Elements of the rollator:
a. handgrip
b. forearm support
c. locking clip
d. upper stabilizing frame
e. lower stabilizing frame
f. wing screw
g. seat
h. IV stand holder
i. lock
2. Application
The walking table is ancillary equipment and is designed for patients
with reduced mobility that need stable support and help while tilting to

2
erect position and walking. It is especially designed for patients who
suffer from different types of motor disorders together with limited
mobility, dysfunction or weakening of lower limbs. The walking table is
also recommended to the elderly as an aid in keeping balance,
improving walking comfort and ensuring safety from falling. The use of
the walking table affects positively on the return to activity of the
people with locomotion and tilting to erect position problems. It
guarantees better stabilization, support and security while walking.
3. Assembly
Unfolding
•Place the walking table on the ground so that the lower stabilizing
frame is from the outside. Place the upper stabilizing frame in the
mounting openings in the front part of the frame and tighten with
wing screws.
•Fix the forearm support into the mounting openings of the frame
and lock it with locking clips on the appropriate height.
•Fix the seat on the lower part of frame. Use the seat for
temporary rest. When moving with the use of walking table, the
seat should be hanged on the outer part of the frame.
•In case of using IV stand, place it in the IV stand holder in the
front part of the frame.
Locks
Note! While using the seat, all the locks should be engaged.
Height adjustment of forearm support
The height of forearm support should be set so that the user can stand
upright, as far as he or she is able to, with his or her shoulders in rest
position and with elbows leaned against the support. It is inadvisable
to hang on the walking table with all the body weight.
•To adjust the height of forearm supports, pull out the locking clip
which is located on the outer side of the frame, select
appropriate height and mount the locking clip again.

3
4. Technical data
Overall width
63 cm
Overall depth
76 cm
Seat dimensions
56 cm x 20 cm
Seat height from the
ground
54 cm
Forearm support height
adjustment
101-124 cm
Weight
10.8 kg
Maximum capacity
100 kg
5. Notes
Timago International Group does not bear responsibility of improper
use of the walking table, failure to comply safety regulations and
misuse.
6. Maintenance
Cleaning
•Clean the frame with damp cloth and dry thoroughly.
•Do not use strong polishing agents due to the damage of
protecting coatings.
•Clean the impurities from moving parts of the walking table
regularly (hinges, wing screws, locks).
7. Storage and transport conditions
Device should not be exposed to direct sunlight, water or moisture.
8. Warranty information
All products distributed by our company are covered by a warranty, the
terms of which are described in the warranty card available on our
website. Please contact the retailer from whom you purchased the
product. Please, keep in mind that for warranty purposes, the proof of
purchase (receipt or invoice) should be retained

4
9. Labels
Reference
number
Manufacturer
LOT number Manufacture date
Serial number Medical device
Note
Please read the
instruction
The manufacturer checked for compliance with
essential medical devices requirements.
Our complete line of products is available from our distributors.
Learn more at: www.timago.com. Thank you for choosing Timago!
Timago International Group
Spółka z o.o. i Spółka – Spółka komandytowa
ul. Karpacka 24/12
43-316 Bielsko-Biała, Polska
T.: [phone]
F.: [phone]
E.: [e-mail]
Rev. II, date 20.05.2021