Timago TGR-R RS 8812 User manual

1
USER MANUAL
Walking table with forearm support
Product code: TGR-R RS 8812
Dear Customers,
Thank you for purchasing our product. We hope that the equipment you have selected will
meet your expectations. We would like to share some important information with you.
Timago International Group is a Polish company which distributes medical, rehabilitation and
orthopaedic products to pharmacies and medical stores.
Our mission is to ensure your comfort by offering safe, functional, and high-quality products.
We have many years of experience in this sector. Timago products reach a wide range of
users in Poland and throughout Europe through our distributors (medical retailers).
Timago’s company culture promotes openness to your needs. Our goal is to promote safe
and correct use of our products for treatment and rehabilitation in order to improve comfort
and quality of life.
We invite you to access our website for more information: timago.com.

2
1. Introduction
Prior to use of our products you should inspect the equipment for any defects which may
have occurred during transport. If this happens, please contact your retailer.
Then, please read this instruction which includes important information for the user.
Please contact us if you have any questions concerning the use of the equipment. Our
advisors will provide you with any information you require on an ongoing basis.
Please note that if you have questions other than those concerning the use of our products,
you should contact your doctor, nurse or physical therapist.
2. Characteristics
Walking table with forearm support is made of chromed steel frame. It is equipped with
foamed handgrips, IV stand holder, upholstered forearm support with smooth height
adjustment, removable seat, and swivel castors with locks.
The set includes:
•Frame with castors
•Upper stabilizing frame
•Lower stabilizing frame
•Forearm support
•Seat
•Locking clips – 4 pcs
•Wing screws – 2 pcs
Elements of the rollator:
a. handgrip
b. forearm support
c. locking clip
d. upper stabilizing frame
e. lower stabilizing frame
f. wing screw
g. seat
h. IV stand holder
i. lock

3
3. Application
The walking table is ancillary equipment and is designed for patients with reduced mobility
that need stable support and help while tilting to erect position and walking. It is especially
designed for patients who suffer from different types of motor disorders together with
limited mobility, dysfunction or weakening of lower limbs. The walking table is also
recommended to the elderly as an aid in keeping balance, improving walking comfort and
ensuring safety from falling. The use of the walking table affects positively on the return to
activity of the people with locomotion and tilting to erect position problems. It guarantees
better stabilization, support and security while walking.
4. Assembly and general recommendations for use
Note! Follow the information contained in this manual while assembly and adjustment.
Users with reduced mobility may need help from a third person who has appropriate skills.
Note! Do not use the walking table if any defects or deficiencies (e.g. crack of frame) are
noticed due to the risk of an accident.
Unfolding
•Place the walking table on the ground so that the lower stabilizing frame is from the
outside. Place the upper stabilizing frame in the mounting openings in the front part
of the frame and tighten with wing screws.
•Fix the forearm support into the mounting openings of the frame and lock it with
locking clips on the appropriate height.
•Fix the seat on the lower part of frame. Use the seat for temporary rest. When
moving with the use of walking table, the seat should be hanged on the outer part of
the frame.
•In case of using IV stand, place it in the IV stand holder in the front part of the frame.
Note! Be careful while unfolding and folding the rollator due to the risk of smashing fingers
in hinges.
Locks
Note! While using the seat, all the locks should be engaged. The assistance of the third
person may be required while first use regardless of the user’s health condition.

4
Height adjustment of forearm support
The height of forearm support should be set so that the user can stand upright, as far as he
or she is able to, with his or her shoulders in rest position and with elbows leaned against
the support. It is inadvisable to hang on the walking table with all the body weight.
•To adjust the height of forearm supports, pull out the locking clip which is located
on the outer side of the frame, select appropriate height and mount the locking clip
again.
5. Technical data
Overall width
63 cm
Overall depth
76 cm
Seat dimensions
56 cm x 20 cm
Seat height from the ground
54 cm
Forearm support height adjustment
101-124 cm
Weight
10.8 kg
Maximum capacity
100 kg
6. Notes and recommendation
•Only one person can use the walking table.
•The seat can be used only for temporary rest.
•Before using the seat, engage the locks.
•Do not use the seat for transport purposes.
•Do not lean out backwards while sitting on the seat as it may cause an accident.
•Do not stand on the walking table.
•Do not hang any objects on the walking table due to the risk of accident.
•The rollator is designed for users with maximum weight 100 kg.
•The rollator is designed to be used on even surfaces with inclination less than 5%.
•Due to the risk of falling, it is unacceptable to use the rollator on wet, icy, greasy, and
strongly sanded surfaces as they do not provide firm support.
•Remove all potential obstacles in the room such as too high carpets or thresholds and
secure slippery floor with anti-sliding mats.

5
•Avoid wet surfaces and use the rollator when light is on.
•Be particularly careful while walking on uneven pavement or overcoming curbs. Do
not walk backwards.
•Do not make any repairs or modifications by yourself. Any repairs should be done by
qualified personnel of the manufacturer.
•It is important to keep all the components clean and to store them in an appropriate
way. Storage in rooms with very high humidity (baths, laundries, etc.) or in the open
air, in combination with lack of hygiene will result in a rapid loss of usable and
aesthetic parameters.
NOTE! Timago International Group does not bear responsibility of improper use of the
walking table, failure to comply safety regulations and misuse.
7. Maintenance
Reviews
Make a visual inspection of all the joining components of the walking table (latch, hinge) at
least once every three months including:
•Locks
•Mounting elements (screws)
•Forearm support height adjustment
•Stability and look of the frame
Cleaning
•Clean the frame with damp cloth and dry thoroughly.
•Do not use strong polishing agents due to the damage of protecting coatings.
•Clean the impurities from moving parts of the walking table regularly (hinges, wing
screws, locks).
8. Warranty information
All products distributed by our company are under a warranty, the terms of which are
described in the warranty card received at the time of purchase.

6
Please, keep in mind that for warranty purposes, the proof of purchase (receipt or invoice)
should be retained.
As a user friendly company, we only supply products which have been thoroughly tested
with respect to materials, quality and functionality.
Please contact us if you have any questions concerning our servicing procedure.
9. Labels
Reference number Manufacturer
LOT number Manufacture date
Serial number
Representative in Euro-
pean Union
Note
Please read the
instruction
The Manufacturer checked for compliance with
essential medical devices requirements.
10. Recommended products
•Products offered by Timago International Group include:
•Orthoses and joint stabilizers
•Manual and special-use wheelchairs
•Walkers and rollators
•Crutches and canes
•Rehabilitation beds
•Ancillary and sanitary equipment
•Anti-decubitus equipment and accessories
•Stabilizing and immobilizing belts
•Electro-medical equipment
•Disposable medical equipment
Our complete line of products is available from our distributors.
Learn more at: timago.com.

7
Manufacturer:
Timago International Group
Spółka z o.o. i Spółka – Spółka komandytowa
ul. Karpacka 24/12
43-316 Bielsko-Biała, Polska
T.: [phone]
F.: [phone]
E.: [email protected]
Issue I, date 21.11.2018