Timago DIAMOND User manual

1
INSTRUCTIONS FOR USE
Aluminium 4-wheeled rollator
Product code: DIAMOND
1. Characteristics
Folding 4-wheeled rollator is made of steel frame which is coated
with paint with metallic lustre. The rollator possesses wide
upholstered seat, soft backrest and basket. The product is
equipped with height adjustable handles with anatomic handgrips
and brakes with locking mechanism. The rollator is supplied with
wheels with narrow cross section 6’’ in diameter.
Elements of the rollator:
a. push handle
b. brake
c. locking knob
d. locking screw
e. closed lock
f. open lock
g. brake cables
h. backrest
i. locking pin
j. crossbar
k. crossbar hinge
l. basket
m. upper brake adjustment
n. lower brake adjustment

2
2. Application
The rollator is designed for patients with reduced mobility who
need stable support and help while walking. It is also
recommended to the elderly as an aid in keeping balance,
improving walking comfort and ensuring safety from falling. The
use of the rollator has a positive effect on the return to activity of
people with locomotion and verticalization problems. It guarantees
better stabilization, support and security while walking.
3. Assembly and adjustment
Mounting elements:
A. Frame
B.1 Left rear leg
B.2 Right rear leg
C.1 Left handle
C.2 Right handle
D.1 Left front leg
D.2 Right front leg
E. Locking screws
F. Open locks
G. Closed locks
H. Locking knobs
I. Backrest

3
Assembly
•Unfold the frame (A) by laying both hinges of the crossbar flat
(backrest mounting sockets indicate the front of the
frame/rollator).
•Insert the left rear leg (B.1) in the left rear hole of the frame by
pressing the locking pin (wheel facing outwards). Block the
upper hole with the closed lock (G) and the lower hole with
the locking screw (E)
•The left rear leg (B.1) is connected by a brake cable to the left
handle of the rollator (C.1). Insert the left handle into the left
hole of the frame and adjust to the desired height. Guide the
brake cable on the outside and secure it in the plastic holder
on the frame. Lock the handle by tightening the locking knob
(H).
•Perform a similar assembly of the right rear leg (B.2) and the
right handle (C.2), making sure to fix the closed lock (G), the
locking screw (E) and the locking knob (H).
•Insert the left front leg (D.1) into the left front hole of the
frame. Lock the upper hole with the open lock (F) and the
lower hole with the locking screw (E).
•Perform a similar assembly of the right front leg (D.2) making
sure to fix the open lock (F) and the locking screw (E).
•Mount the backrest (I) by locking both of the locking pins.
Folding and unfolding the rollator
•To fold the assembled rollator, lift the seat and pull the
crossbar under the basket, then fold down the rollator's frame.
•To unfold the assembled rollator, unfold the frame and push
on the crossbar under the basket until the hinges of the
crossbar are completely open. Then put the seat down.

4
Brakes
•To stop the rollator, pull the brake handle upwards and hold.
•During a stop or using the seat, lock the brake with the parking
mechanism by pushing the brake handle down.
•To release the brake, pull the brake handle upwards.
Handles height adjustment
•To adjust the height of the handles, unscrew the locking knobs
located on the outer side of the frame, select the appropriate
height and tighten the locking knobs.
Note! The handles must be set on the same level.
Brakes adjustment
Adjustment of the upper brake
Unscrew the nut of the cable, pull it up to the appropriate length
and lock it by tightening the locking screw.
Adjustment of the lower brake
Loosen the mounting screw with the use of an open-end wrench,
pull the black brake cable to adjust its tension, and then, tighten
the mounting screw.
4. Technical data
Overall width
62 cm
Overall depth
61 cm
Seat width
35,5 cm
Overall height
74-88 cm
Seat height from the ground
48 cm
Weight
8,6 kg
Maximum capacity
100 kg

5
Maximum capacity of the
basket
5 kg
Frame colours
titanium
5. Notes
Timago International Group does not bear responsibility of
improper use of the rollator, failure to comply safety regulations
and misuse.
6. Maintenance
Clean the frame with damp cloth and dry thoroughly. Do not use
strong polishing agents due to the damage of protecting coatings.
Clean the dirt from moving parts of the rollator regularly (hinges,
clamping screws, locks).
7. Storage and transport conditions
Device should not be exposed to direct sunlight, water or moisture.
8. Warranty information
All products distributed by our company are covered by a warranty,
the terms of which are described in the warranty card available on
our website. Please contact the retailer from whom you purchased
the product. Please, keep in mind that for warranty purposes, the
proof of purchase (receipt or invoice) should be retained
9. Labels
Reference
number
Manufacturer
LOT number Manufacture date
Serial number Medical device

6
Note
Please read the
instruction
The manufacturer checked for compliance with
essential medical devices requirements.
Our complete line of products is available from our distributors.
Learn more at: www.timago.com.
Thank you for choosing Timago!

7

8
Timago International Group
Spółka z o.o. i Spółka – Spółka komandytowa
ul. Karpacka 24/12
43-316 Bielsko-Biała, Polska
T.: [phone]
F.: [phone]
E.: [e-mail]
Rev. I, date 25.10.2021