Please read instructions carefully to understand how to operate your Timex®
watch… Your model may not have all of the features described in this
booklet.
FUNCTIONS
Real-time calendar clock, Second time zone, Countdown timer, Daily/weekday/
weekend alarm, Hourly chime, Chronograph with lap/split storage, INDIGLO®
night-light with Night-Mode®Feature…
BASIC OPERATION
SET/RECALL
OR DONE
(To save changes
and exit setting)
MODE OR NEXT
(Proceed to next
step)
START/SPLIT OR +
(Increase value… Hold to
increase rapidly)
STOP/RESET OR –
(Decrease value… Hold to
decrease rapidly)
INDIGLO®Button
SET/RECALL
OR DONE
(To save changes
and exit setting)
MODE OR NEXT
(Proceed to next
step)
INDIGLO®Button
START/SPLIT OR +
(Increase value… Hold to
increase rapidly)
STOP/RESET OR –
(Decrease value… Hold to
decrease rapidly)
When setting, each button has a dierent function as indicated above. Watch
face will indicate when button changes function…
TIME/DATE/HOURLY CHIME
1. In TIME mode, press and hold SET/RECALL. Time zone will ash.
2. To set, push + or – to select rst or second time zone.
3. Press NEXT. Hour digits ash.
4… Press + or – to change hour including AM/PM… (Scroll through 12 hours to
get to AM/PM)…
5. Press NEXT. Minute digits ash.
6… Press + or – to change minutes…
7. Press NEXT. Second digits ash.
8… Press + or – to set seconds to zero…
9… Continue pattern to set month, day of month, year, 12-hour or 24-hour
time display, MM.DD or DD.MM date format, turn hourly CHIME on/o, turn
BEEP on/o. If you select BEEP on, a beep will sound every time you push
a button (except INDIGLO®)…
10. Press DONE to conrm and exit or NEXT to continue and set second time
zone, if desired…
11… When in Time mode, press and hold START/SPLIT to “peek” at second time
zone; hold for 4 seconds to switch time zones…
CHRONO
LAP 1 = 7.11 LAP 2 = 7.50
SPLIT 2 = 15.01
LAP 3 = 7.08
SPLIT 3 = 22.09
LAP 4 = 7.30
SPLIT 4 = 29.39
SPLIT 1 = 7.11
1… Press MODE until CHRONO appears…
2… Press and hold SET/RECALL…
3… The Display will read: FORMAT/SET, then select LAP/SPL or SPL/LAP
options…
4… Press + or – to select desired format…
5. Press DONE to conrm and exit.
6… To use chrono, press START/SPLIT… Chrono continues to run even if you exit
the mode…
7… Press STOP/RESET to stop chronograph from running OR while chrono is
running, press START/SPLIT to take a split… Lap and split times will then be
displayed in the format you selected… The lap number will alternate with the
last two digits of the bottom line…
NOTES:
• Lap and split times will appear frozen for 10 seconds… Press MODE to
release the display and see running chrono…
• While chronograph is running or stopped, press SET/RECALL, then press +
or – to scroll through stored laps or to recall stored laps/splits… Press SET/
RECALL again to return to running chronograph…
• Press and hold STOP/RESET to reset chronograph…
TIMER
1… Press MODE repeatedly until TIMER appears…
2. Press SET/RECALL. Hour digits ash.
3… Follow same pattern as setting TIME and ALARM to set hours, minutes,
seconds, and select between REPEAT/AT END (timer counts down and then
repeats) or STOP/AT END (the timer counts down and then stops)…
4. Press DONE to conrm and exit.
5… Press START/SPLIT to start TIMER… Timer will continue to run even if you exit
Timer mode… If REPEAT/END selected h will ash. If STOP/END selected H
will ash.
6… An alarm melody will chime when the timer has reached zero or before it
starts to count down again…
7… Press STOP/RESET to stop TIMER… Press again to reset to countdown time…
ALARM
Setting the ALARM is similar to setting TIME…
1… Press MODE repeatedly until ALARM appears…
2… Press SET/RECALL to set alarm…
3. Hour digits ash. Press + or – to change hour.
4. Press NEXT. Minute digits ash. Press + or – to change minutes.
5. Press NEXT. If in 12-hour format, AM/PM ashes. Press + or – to change.
6… Press NEXT… Press + or – to select DAILY, WEEKDAYS OR WEEKENDS…
7. Press DONE to conrm and exit.
8… Press Start/Split or Stop/Reset to arm or disarm alarm… When disarmed, OFF
will be displayed… When armed, the alarm clock icon will appear t…
9… The INDIGLO® night-light and alarm icon ashes and an alert sounds when
the alarm goes o. Press any button to silence. A back up alarm will sound
after ve mintues if you don’t press any buttons.
INDIGLO®NIGHT-LIGHT/NIGHT MODE®FEATURE
Press INDIGLO®button to activate night-light… Electroluminescent technology
used in INDIGLO®night-light illuminates entire watch face at night and in low
light conditions… While the night-light is on pressing any button keeps it on for
three seconds…
Press and hold INDIGLO®button for 4 seconds to activate NIGHT-MODE®
feature… Moon icon Pwill appear… Once activated, any button pushed will cause
INDIGLO®night-light to stay on for 3 seconds… NIGHT-MODE®feature
