Titan Fitness HDBOXSTND User manual

-
MPN(s):HDBOXSTND
SKU(s):400706
UPC(s):719318368756

2

3
NOTE: Before starting assembly, remove all parts and hardware from the carton, ensure you
have everything according to the list.
1. Install CROSS FRAME (3) to TOP UPRIGHT FRAME (2) using HEX BOLT M10*110 (10), FLAT
WASHER Φ11*Φ20*2 (12), SPRING WASHER Φ10 (15), and FLAT NUT M10 (18).
2. Install STRENGTH PLATE (4) to CROSS FRAME (3) and TOP UPRIGHT FRAME (2) using HEX
BOLT M10*95 (9), FLAT WASHER Φ11*Φ20*2 (12), FLAT WASHER Φ11*Φ34*3 (13), SPRING
WASHER Φ10 (15), and FLAT NUT M10 (18).
3. Please tighten nuts and bolts.

4

5
This concludes the HDBOXSTND Owner’s Manual.
If applicable to your product, make sure to tighten all nut-
and-bolt combinations before use.
Enjoy!
DISCLAIMER
This equipment must be used with care by capable and competent individuals under supervision, if necessary.
The use of any fitness equipment, including this one, involves the potential risk of injury. You accept and assume full
responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may
occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and
agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the
same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW,
COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN
USE OF THE EQUIPMENT.
NEED HELP?
CONTACT US FIRST.
1 [phone]
[e-mail] /
Business Hours: Monday–Friday • 8:00 a.m.–5:00 p.m. (CT)