Titan Fitness LATTWR1 User manual

LAT TOWER | 10-300 LB SELECTOR
LATTWR1-LATTWR2-LATTWR3-(3) LATTWRWHT
400467
Operator’s Manual
Read the Operator’s Manual entirely. When you see this
symbol, the subsequent instructions and warnings are
serious follow without exception. Your life and the lives
of others depend on it!

2
PARTS DIAGRAM / EXPLODED VIEW
KEY DESCRIPTION QTY KEY DESCRIPTION QTY
(1) REAR BASE 1 (19) PAD 1
(2) REAR UPRIGHT 1 (20) WEIGHT PLATE (NO.2-30) 29
(3) BOTTOM CROSS BASE 1 (21) TOP WEIGHT PLATE (NO.1) 1
(4) FRONT UPRIGHT 1 (22) WEIGHT SELECTOR 1
(5) TOP CROSS BEAM 1 (23) PIN 1
(6) PAD SUPPORT FRAME 1 (24) SCREW ROD 4
(7) BIG PLATE 2 (25) ROD (20 CM) 2
(8) ADJUSTABLE TUBE 1 (26) LIMIT RING 8
(9) FOOTPLATE 1 (27) METAL SLEEVE (22) 2
(10) ADJUSTABLE FOAM FRAME 1 (28) METAL SLEEVE (12) 4
(11) WHEEL FIXED BOARD 1 PAIR 2 (29) NYLON SLEEVE (48) 1
(12) REINFORCED PLATE 2 (30) NYLON SLEEVE (68) 1
(13) GUIDE ROD FIXED PLATE 2 (31) SAFETY BUCKLE 3
(14) LAT BAR 1 (32) CHIAN 1
(15) WHEEL 9 (33) RUBBER BUMPER 2
(16) WHEEL BRACKET 2 (34) CABLE (3360MM) 2
(17) END COVER 2 (35) GUIDE ROD 2
(18) FOAM ROLLER 2 (36)

3
HARDWARE LIST

4
PARTS DIAGRAM

5
ASSEMBLY INSTRUCTIONS
STEP 1
Attach REAR UPRIGHT (2) to REAR BASE (1) using M12*100mm BOLT (36), M12 WASHER (43)
and M12 NYLON LOCKNUT (45).
STEP 2
Attach BOTTOM CROSS BASE (3) to REAR UPRIGHT (2) using M12*100mm BOLT (36), M12
WASHRE (43), and M12 NYLON LOCKNUT (45), and then attach the other end of the CROSS
BASE (3), the PAD SUPPOERT FRAME (6) to FRONT UPRIGHT (4) using M12*100mm BOLT
(36), M12 WASHER (43), and M12 NYLON LOCKNUT (45).

6
ASSEMBLY INSTRUCTIONS
STEP 3
1. Attach GUIDE ROD FIXED PLATE (13) to BOTTOM CROSS BASE (3) using M10*95MM
BOLT (37), M10 WASHER (44), and M10 NYLON LOCKNUT (46).
2. Insert the ROD (21 CM) (25) through the hole of the BOTTOM CROSS BASE (3) using
M10*50MM BOLT (40). Then attach LIMIT RING (26) to the ends of the 21CM ROD (25)
using M6 SCREW (42).
STEP 4
1. Insert WEIGHT SELECTOR (22) into the hole of the
TOP WEIGHT PLATE (21) using the PIN (23).
2. Put the RUBBER BUMPER (33), WEIGHT (20)
(No.30) on the GUIDE ROD FIXED PLATE (13) and
insert one end of the GUIDE ROD (35) into the
HOLE (21mm).
3. Next, slide the WEIGHT PLATES (20) down the
GUIDERODS (13) in this order
a. 28PC WEIGHT PLATES (20) (No.29-2) and the TOP
WEIGHT PLATE (21) (No.1).

7
ASSEMBLY INSTRUCTIONS
STEP 5
1. Attach the TOP CROSS BEAM (5) to the REAR UPRIGHT (2) and FRONT UPRIGHT (4)
using M12 X 100MM BOLT (37), M12 WASHER (45) and M12 NYLON LOCKNUT (47).
2. Insert the other end of the GUIDE ROD (35) through the hole of GUIDE ROD FIXED
PLATE (13) and attach them to TOP CROSS BEAM (5) USING M10 X 100MM BOLT (38),
M10 WASHER (46) AND M10 NYLON LOCKNUT (48).
1.
Attach the WHEEL FIXED BOARD (11A, B) to
TOP CROSS BEAM (5) using M12 X 105MM
BOLT (36), M12 WASHER (45) and M12
NYLON LOCKNUT (47).

8
ASSEMBLY INSTRUCTIONS
STEP 7
1. Attach the BIG PLATE (7), NYLON SLEEVE (48mm) (29)
to PAD SUPPORT FRAME (6) using M10x75 (40), M10
WASHER (46) and M10 NULON LOCKNUT (48).
2. Attach the REINFORCED PLATE (12) to the BOTTOM
CROSS BASE (3), FRONT UPRIGHT (4) using
M12x105MM BOLT (36), M12 WASHER (45) and M12
NYLON LOCKNUT (47).
3. Insert the ADJUSTBALE FOAM FRAME (10) into the
PAD SUPPORT FRAME (6) using M16 KNOB (49) then
push the FOAM ROLLER (18) on the ends using END
COVER (17), WASHER (46) and M10*30 BOLT (42).
4. Attach the FOOTPLATE (9) to ADJUSTABLE TUBE (8)
using M10x16MM BOLT (43), and M10 WASHER (46)
then insert the ADJUSTBALE TUBE (8) into the PAD
SUPPORT FRAME (6) using M16 KNOB (49).
5. Attach the PAD (19) to the
PAD SUPPORT FRAME (6)
using M10 WASHER (46),
M10x30 BOLT (42).

9
ASSEMBLY INSTRUCTIONS
STEP 9
THEN TIGHTEN ALL BOLTS
AND LOCK NUTS

10
ACKNOWLEDGEMENT OF RISK AND RELEASE OF LIABILITY
The use of any equipment, including this one, involves the potential risk of injury. Apart from any warranty
claim that might be presented for a claimed defect in material or workmanship of the product, you accept
and assume full responsibility for any and all injuries, damages (both economic and non-economic), and
losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers,
employees, officers, directors, associates, and agents from any and all claims, demands, damages,
rights of action, or causes of action, present or future, whether the same be known or unknown,
anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
This equipment must be used with care by capable and competent individuals under supervision,
WARNING
Heavy object. Use lifting aids and
proper lifting techniques when moving.
Choking hazard. Small parts –
Please exercise caution if small
children or pets are present.
Sharp objects may be involved.
Use precaution and protection.
TITAN LIMITED WARRANTY: TERMS, EXCLUSIONS AND LIMITATIONS OF REMEDIES
This product comes with a one (1) year limited warranty that can be found at
www.titan.fitness/warranty.html Please review the same for all details regarding the
Titan Limited Warranty.
THE TITAN LIMITED WARRANTY FOUND AT WWW.TITAN.FITNESS/WARRANTY IS EXCLUSIVE AND IS IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE, EACH OF WHICH IS HEREBY
DISCLAIMED.

11
NEED HELP? CONTACT US FIRST.
1-888-410-1503
info@titan.fitness
www.titan.fitness
© 2021 Titan Brands