TMG TMG-LPG10 User manual

►www.tmgindustrial.com P0 / 9 Toll Free:1-877-761-2819
Main specifications
Overall assembled size : W4.88 x L7.5x H3.05 (m) / 16 x 24 x 10
(ft)
Front door : W3.6 x H2.0 (m) / 11.8 x 6.56 (ft)
Side door: W0.9 x H2.0 (m) / 2.95 x 5.56 (ft)
Prior to assembly
Please read the instructions carefully before installation. It is very
important to follow your local safety regulations and industry
standards during installation. Regulations may include but are not
limited to:
-Safety helmets, protective eyewear, and clothing
-Safety harnesses for all elevated workers
-Proper ladder, cage, and safety operation
Check all components and parts before installation. All parts are marked with
a part number, please refer to the parts list to make sure you have all parts.
Choose a day with low or no wind to install, assembly is hard in heavy wind.
Do not make any alterations to the structure. Do not hang any weights on the
frame during installation, including parts. We are not responsible for any

►www.tmgindustrial.com P1 / 9 Toll Free:1-877-761-2819
Main Specifications:
Assembly size : W2.95 x L2.95 x H2.5 (m) / 10ft x 10ft x 8ft
Prior to assembly
Please go through the whole instruction manual completely. It is very important to
follow your local safety regulations and industry standards during installation.
Regulations may include but are not limited to:
- Safety helmets, protective eyewear, and clothing
- Safety harnesses for all elevated workers
- Proper ladder, cage, and safety operation
Check all components and parts before installation. All parts are marked with a part
number, please refer to the parts list to ensure you have all parts.
Choose a day with low or no wind to install, it is hard to assemble with heavy wind. Do
not make any alterations to the structure. Do not hang any weight on the frame during
installation, including parts. We are not responsible for any damages or injuries caused
by inappropriate installation, unauthorized modifications or extreme weather.
Check the parts list below to make sure all parts are received prior to assembly.

►www.tmgindustrial.com P2 / 9 Toll Free:1-877-761-2819
TMG-LPG10 Part List
Parts
code
Graphical
Description
Length
Qty
A1
Post
110X110mm
4
A2
Base cover
190X190mm
4
A3
Base footing plate
170X170mm
4
A4
Base footing screw
4X35mm
24
A5
Expansion bolt
M8X7mm
16
A6
Post cover
110X110mm
4
A7
Post cover screw
4X16mm
24
A8
Small cover
18X18X2
4
B1
Beam B1
80X140mm
1
B2
Beam B2
80X140mm
1
B3
Beam B3
80X140mm
1
B4
Beam B4
80X140mm
1
B5
Rubber plug
8mm
40
B6
Sliding pin
35*17mm
42
B7
Sliding pin screw
4*16mm
84
C1～C21
Blade
149.98*43.8mm
21
C44
Letters
6*8*8mm
1
D1
L shape aluminum plate
25*15mm
2

►www.tmgindustrial.com P3 / 9 Toll Free:1-877-761-2819
E
R-shape pin
1.8*35mm
42
F1
Front breakwater
65*15mm
1
F2
Front breakwater screw
4*16mm
3
G1
Rear breakwater
125*26mm
1
G2
Rear breakwater screw
4*16mm
5
H
Hexagon spanner
3mm
2
I
Pergola remote control
1
J
Small rubber hammer
26*6*2mm
1
K
Phillips bit
65mm
2
L
Drill Bit
3.4mm
1
N
Silicon sealant
120ml
1
T
Hand crank
1600mm
1

►www.tmgindustrial.com P4 / 9 Toll Free:1-877-761-2819
Step 1:Install Base footing plate and Beam
Lay the post A1 flat, install base cover A2 and base footing plate A3 on all post A1, and
drilling base footing screw A4. The step applies to the two post on the right
Install the beam, insert the ends of beam B1 into two post A1, and tighten the screws
.
Parts
code
Graphical
Qty
B1
1
A1
4
B3
1
A2
4
A3
4
A4
16