Toa N-XC65-W User manual

TOA Canada Corporation
INSTALLATION MANUAL
IP Audio Window Intercom Kit N-XC65-W
1. INTERFACE DESCRIPTION
A. Internal Window Intercom Module
【Front】【Side】 【Interface line】
①Network status indication: red light for
offline and green light for online.
②Gooseneck microphone socket: plug the
gooseneck microphone and fix the screw.
③Loudspeaker: amplify the audio from the
external window intercom.
④Voice Broadcast button:
When the intercom button ⑥is ON (blue
light ON):
•Short press to broadcast "Hello,
welcome" message.
•Long press (1 second) to broadcast
"Thank you, welcome next time".
The broadcast button flashes green during
broadcasting.
⑤Remote Intercom button: when the
terminal is connected to the server, press
the button to make a call to the supervisor
intercom terminal specified by the server.
⑥Intercom button: press the button to
communicate with the external window
intercom, finish the conversation by
pressing the button again. The intercom
button light blue during conversation.
①
Scene mode adjustment
switch:
Three scene modes are available:
•Noisy (to the front)
•Standard (in the middle）
•Quiet (to the back)
Standard is the default mode.
①
Power interface: connect with
12V/1.5A power.
②Network interface: connect
the cable to the switch.
③Analog audio output
interface: Connect to a DVR or IP
camera.
④External window intercom
interface connection.
Notes: please refer to the User Manual for more detailed information.

TOA Canada Corporation
B. External Window Intercom Module
①Loudspeaker/MIC：
Loudspeaker: amplify the audio from the Internal Window Intercom module.
Microphone: pick up the audio at the External Window Intercom module.
②Connector to the Internal Window Intercom module.
2. CONNECTION DIAGRAM
3.APPEARANCE

TOA Canada Corporation
4. SPECIFICATIONS
Power Supply
DC 12V 1.5A
Consumption
≤ 5W
Network Protocol
TCP/IP, UDP, ARP, ICMP, IGMP, FTP
Audio Code
PCM/AAC
Audio Sampling
8 KHz – 32 KHz
S/N
> 90 dB
Frequency Response
20 Hz – 16 KHz
Interface
1x RJ45, 1x Power Supply, 1x External Unit,
1x Rec Out
Working Temperature
-20℃- 60℃
Humidity
≤ 90% RH (Not condensing)
Dimensions
Internal Unit 160 x 95 x 46.5 mm
External Unit 83 x 24 mm
Weight
Internal Unit 0.44 Kg
External Unit 0.2 Kg
5. INSTALLATION
First, put the internal window intercom in a suitable place (please refer to the installation manual).
Fix the external window intercom, tear off the 3M glue protective layer at reverse side, then paste the
external window intercom on the glass (At the same time, the bushings in the attachment can be
inserted into the interface above the outer wire, and then the EV cotton can be used to paste the
protective wire sleeve vertically on the glass to avoid loosening the interface due to the wire pulling).
Connect the internal window intercom with the external window intercom according to the connection
diagram.