Toledo CV180BLEUS15 User manual

Programing Instructions
Model: CV180BLEUS15
Before starting, be sure you assemble the door lock correctly.
Step # 1
Reset
→Press the button for ten (10) seconds until you hear three (3) beeps.
Step # 2 with deadbolt unlocked.
Door Direction Setting
→+ + + - Programing Code (PC) Number
→
→
→
Step # 3 with deadbolt unlocked.
Delete All User Code (UC)
→+ + + - Programing Code (PC) Number
→
→
→
Step # 4 with deadbolt unlocked.
Add New User Code (UC)
→+ + + - Programing Code (PC) Number
→
→
→
→Enter the new four (4) to ten (10) digit user code (UC) number.
→
Step # 5 with deadbolt unlocked.
Enable or Disable the Auto-Lock
→+ + + - Programing Code (PC) Number
→
→
→
Step # 6 with deadbolt unlocked.
Customize the Auto-Lock Timer
→+ + + - Programing Code (PC) Number
→
→
→
→Enter numbers from + to + in order to configurated seconds
between ten (10) to ninety nine (99).
→
Step # 7 with deadbolt unlocked.
Bluetooth Settings Manual
→Download the BLE Smart Lock on or at the
→Set your username.
→The default programing code is going to be 0000. (change the default programing
code) (see the step one on the advanced programing section below)
→Set lock name for your door lock.
→Make sure to click the checkmark circle.
→Press the connect button.

Advance Programing
Change Programing Code (PC) with deadbolt unlocked.
→+ + + - Programing Code (PC) Number
→
→
→
→Enter the new four (4) to ten (10) digit programing code (PC) number.
→
Delete one user code (UC) at a time with deadbolt unlocked.
→+ + + - Programing Code (PC) Number
→
→
→
→Enter user code (UC) number you want to delete.
→
Temporary Disable All User Codes with deadbolt unlocked.
→+ + + - Programing Code (PC) Number
→
→
→
Single Entry User Code with deadbolt unlocked.
→+ + + - Programing Code (PC) Number
→
→
→
→Enter the new four (4) to ten (10) digit user code (UC) number.
→
Volume Control with deadbolt unlocked.
→+ + + - Programing Code (PC) Number
→
→
→