Toledo CV180BMUS15 User manual

Programing Instructions
Model: CV180BMUS15 and CV180BMUS514
Before starting, be sure you assemble the door lock correctly.
Step # 1
Reset
→Press the button for five (5) seconds until you hear three (3) beeps.
Step # 2 with deadbolt unlocked.
Door Direction Setting
→+ + + - Programming Code (PC) Number
→
→
→
Step # 3 with deadbolt unlocked.
Delete All User Code
→+ + + - Programming Code (PC) Number
→
→
→
Step # 4 with deadbolt unlocked.
Add New User Code
→+ + + - Programming Code (PC) Number
→
→
→
→Enter the new four (4) to ten (10) digit user code (UC) number.
→
Step # 5 with deadbolt unlocked.
Create a New Fingerprint
→+ + + - Programming Code (PC) Number
→
→+
→
→Put your finger three (3) times.
Step # 6 with deadbolt unlocked.
Enable or Disable the Auto-Lock
→+ + + - Programming Code (PC) Number
→
→+
→
Step # 7 with deadbolt unlocked.
Customize the Auto-Lock Timer
→+ + + - Programming Code (PC) Number
→
→+
→
→Press for 10 seconds, for 20 seconds, for 30 seconds, for 40
seconds or for 50 seconds.
→

Advanced Settings
Changing Programing Code with deadbolt unlocked.
→+ + + - Programming Code (PC) Number
→
→
→
→Press the new four (4) digit programing code (PC) number.
→
Delete one UC (user code) at a time with deadbolt unlocked.
→+ + + - Programming Code (PC) Number
→
→
→
→Press the user code (UC)number you want to delete.
→
Temporary Disable All User Codes with deadbolt unlocked.
→+ + + - Programming Code (PC) Number
→
→+
→
Single Entry User Code with deadbolt unlocked.
→+ + + - Programming Code (PC) Number
→
→+
→
→Enter the new four (4) digits user code (UC) number.
→
Delete an existing Fingerprint with deadbolt unlocked.
→+ + + - Programming Code (PC) Number
→
→+
→
→Put the fingerprint that you want to eliminate.
Delete all existing Fingerprint with deadbolt unlocked.
→+ + + - Programming Code (PC) Number
→
→+
→
Enable or Disable Sound with deadbolt unlocked.
→+ + + - Programming Code (PC) Number
→
→+
→