Toledo V160ELPLUUS15 User manual

Programing Instructions
Model: V160ELPLUUS15 and V160ELPLUUS514
Before starting, be sure you assemble the door lock correctly.
Step # 1
Reset
→Remove one of the batteries.
→Press and hold while inserting the battery and hold until the long beeps stop.
→Press + + + + + to configurate the opening direction.
Step # 2 with deadbolt unlocked.
Delete All User Code
→Press the for one (1) second until you hear a beep and the red light appear.
→+ + + + + - Programing Code (PC) Number
→
→+
→
→Let the red light disappear.
Step # 3 with deadbolt unlocked.
Add New User Code
→Press the for one (1) second until you hear a beep and the red light appear.
→+ + + + + - Programing Code (PC) Number
→
→+
→
→Enter the new four (4) to ten (10) digit user code (UC) number.
→
→Let the red light disappear.
Step # 4 with deadbolt unlocked.
Enable or Disable the Auto-Lock
→Press the for one (1) second until you hear a beep and the red light appear.
→+ + + + + - Programing Code (PC) Number
→
→+
→
→(ON)
→
→Let the red light disappear.
→Or
→(OFF)
→
→Let the red light disappear.
Step # 5 with deadbolt unlocked.
Customize the Auto-Lock Timer
→Press the for one (1) second, until you hear a beep and the red light appear.
→+ + + + + - Programing Code (PC) Number
→
→+
→
→Enter numbers from + to + in order to configurated seconds
between ten (10) to ninety nine (99).
→
→Let the red light disappear.

Advanced Settings
Changing Programing Code
→Press the for one (1) second until you hear a beep and the red light appear.
→+ + + + + - Programing Code (PC) Number
→
→+
→
→Enter the new six (6) digits programing code (PC) number.
→
→Let the red light disappear.
Delete one UC (user code) at a time with deadbolt unlocked.
→Press the for one (1) second until you hear a beep and the red light appear.
→+ + + + + - Programing Code (PC) Number
→
→+
→
→Entre the user code (UC) number you want to delete.
→
→Let the red light disappear.
Single Entry User Code with deadbolt unlocked.
→Press the for one (1) second until you hear a beep and the red light appear.
→+ + + + + - Programing Code (PC) Number
→
→+
→
→Enter the six (6) digit user code (UC) number.
→
→Let the red light disappear.
Temporary Disable All User Codes (Vacation Mode) with deadbolt unlocked.
→Press the for one (1) second until you hear a beep and the red light appear.
→+ + + + + - Programing Code (PC) Number
→
→+
→
→(ON)
→
→Let the red light disappear.
→Or
→(OFF)
→
→Let the red light disappear.
Volume Control with deadbolt unlocked.
→Press the for one (1) second until you hear a beep and the red light appear.
→+ + + + + - Programing Code (PC) Number
→
→+
→
→(ON)
→
→Let the red light disappear.
→Or
→(OFF)
→
→Let the red light disappear.