Tomoloo Warship V3-1 User manual

Tomoloo Warship V3-1
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch

2
English
3 –24
Čeština
25 –46
Slovenčina
47 –68
Magyar
69 –90
Deutsch
91 –113

3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
󲐜󲐝󲐞󲐟󲐠www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

4
Warnings
PLEASE READ THE USER MANUAL THOROUGHLY. Failure to follow the basic instructions
and safety precautions listed in the user manual may damage your device or body
injury.
Thank you for purchasing the Tomoloo V3-1 Electric Scooter. Please read all instructions
carefully before using and retain this manual for future use and reference.
This manual applies to the Tomoloo V3-1Scooter.
•In order to avoid dangers that are caused by collisions, falls, and loss of control,
please learn how to ride safely.
•You can learn operating skills by reading the product manual.
•This manual includes all operating instructions and precautions, and users must
read it carefully and follow the instructions.
•All users are responsible for any consequences caused by violating warning
contents or prompt operations.
Attention
1. The operating temperature range of the charger is 32°-104°F (0°-40°C)
2. The operating temperature range is 32°-104°F(0°-40°C).
3. Do not ride on icy or slippery surfaces.
4. Read the user manual before riding.
5. Store in a dry, ventilated environment.
6. When transporting, avoid violent crashes or impact.
7.When the device which displays low battery or no power is placed for more than 3
months, the battery will enter sleep mode and cannot be charged anymore. Please
charge the device regularly.
8. After leaving your device for more than 15 minutes and without any operation, the
device will automatically shut down.

5
Low Temperature Warnings
Low temperature will affect the lubrication of moving parts inside the V3-1scooter,
increasing internal resistance. At the same time, in low temperatures, the discharge
capacity and the capacity itself of the battery will be significantly decreased.
Do not ride the V3- violently in low temperatures around or below 32° F (0° C).
Safety Instructions
Keep the device away from heat sources, direct sunlight, humidity, and prolonged
exposure to water.
Do not operate the device if it has been exposed to water, moisture, or any other liquids
to prevent against electric shock, explosion and/or injury to yourself and damage to the
device.
Do not use the device if it has been dropped or damaged in any way.
Repairs to electrical equipment should only be performed by a qualified electrician.
Improper repairs may place the user at serious risk.
Do not puncture or harm the exterior surface of the product in any way.
Keep the device free from dust, lint, etc.
Do not use this device for anything other than its intended use or purpose. Doing so
may damage the device.
This product is not a toy. Keep out of reach of children.
Do not expose batteries, battery pack, or batteries installed to excessive heat, such as
direct sunlight, or open flame.

6
Introduction
The Tomoloo V3-1 isa personal transporter. Our technology and production processes
are developed with strict testing for each Tomoloo scooter. Driving without following the
contents of this manual may lead to damage to your device or may cause bodily injury.
This manual is designed to give you the information you need for the safe operation and
maintenance of your new V3-1. Please read it thoroughly before riding your V3-1.
Package Contains
Tomoloo V3-1Electric Scooter
3-pin Charge Cable
Operation Manual
(30.20 Ib / 13.7 kg)
1. Fender
2. Left Foot Mat
3. Power/Battery Indicator
4. Status LED Indicator
5. Right Foot Mat
6. LED Light
7. Power Button (Located in rear)
8. Charge Port (Located in rear)

7
Operating Principals
The device uses digital electronic gyroscopes and acceleration sensors to control
balance and motion, depending on the user's centre of gravity. The device also uses a
control system to drive the motors that are located within the wheels. The device has a
built-in inertia dynamic stabilization system that can help assist with balance when
moving forward and backwards, but not while turning.
TIP: To increase your stability, you must shift your weight in order to overcome the
centrifugal force during turns, especially when entering a turn at higher speeds.
Warning: Any V3-1scooter that does not work properly can cause you to lose control
and fall. Check the entire device thoroughly before every riding, and do not ride it until
any problems have been corrected.
Specifications
Model:
V3-1
Net Weight:
30.20 Ibs (13.7 kg)
Load:
44-265 lbs (20-120 kg)
Max Speed:
Up to 9.3 mph (15 km/h)
Max Distance Range:
Up to 9.3 miles (15 km)
Max Incline Angle:
15°-20°
Minimum Turning Radius:
o°
Battery Type:
Lithium-ion
Battery Voltage:
36 V
Battery Capacity:
4.0 Ah
Power Requirement:
AC 100-240V, 50-60 Hz
Wheel Size:
8.5 Inches (21.59 cm)
Tire Type:
Non-Pneumatic Solid Tires
Bluetooth Range:
Up to 33ft
Bluetooth Speaker:
V4.0 with stereo sound quality
UL Certification:
UL 2272 approved

8
Controls and Display
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
Turning your Device On/Off
Power On: Take your device out of the box and place it flat on a level surface. Press the
power button (located on the rear of your device) once. Check the battery LED indicator
(located in the centre of your device). The battery indicator light should be lit, indicating
the device is powered on.
Power Off: Press the power button once.
Mat Sensor
There are four sensors under the foot mats on your scooter. When the user steps off the
scooter mats, it will automatically initiate self-calibration.
When riding the scooter, you must ensure you are stepping on the foot mats. Do not
step or stand on any other area of your scooter.
Do not put items on the foot mats. Doing so will make the V3-1turn on, and increase the
probability of collision and cause injury to people, riders, or damage the device.
Battery Indicator
The display board is located in the middle of the V3- 1scooter.
•Green LED light stay solid without flashing indicates electricity from 100% to 20%
.
•Yellow LED light flashing indicates electricity from 20% to 10%.
•Red LED light flashing indicates electricity from under 10%.
When the LED light turns red, please stop riding.

9
Status Indicator
When the operator triggers the foot mats, the LED Status Indicator will light up, which
indicates that the V3- 1is now ready for use.
When the system has an error during operation, the status LED light will turn red (for
more details see SAFETY ALERTS).
Smartphone App
Your V3-1lisan App-enabled scooter that works with most mobile devices. You must
download the Tomoloo app in order to change certain features of your V3-1such as
headlight colours and skill mode.
Please download the App from either the App Store or download the App from the
Google Play Store.

10
Using the App
Dashboard
1. Bluetooth - To connect to your V3- 1 Through Bluetooth on your smart phone, press
“Connect”. If your V3-1is already paired, this part of the screen will show “Connected” in
blue.
2. Settings - Press the gear icon to adjust settings.

11
3. Speed - The digital speedometer displays your speed in kms per hour.
4. Battery - The percentage displays the remaining battery life of your V3.
5. Enjoy - Operation Tips.
6. Sports - Enter the sports mode.
7. Change Mode - Change Riding modes: Beginner, Intermediate, Advanced.
8. Standby - Turn on & Turn off the scooter.
9. Customize Headlights - Change the colours and brightness of your LED Lights.
10. Friends-This function can help you add your friends who also have "TOMOLOO
scooter “, and you can review his/her recent games in his/her page.
11. Home - Back to home page.
12. Challenge-You can PK your friends who also have "TMOLOO scooter" in this Mode,
which can be set as you like.
13. More - Display more information.
Bluetooth
Press “Bluetooth” to have the App begin scanning for any Tomoloo devices. Your V3-1
must be powered on and your smart phone’s Bluetooth must be enabled. If your
Bluetooth is not enabled on your smart phone, the App will remind you to enable it.
Once scanning is complete, all detected Tomoloo scooters will display in a list. Press the
select button to pair with a scooter and use the PIN “000000”. If multiple Tomoloo
scooters appear, continue attempting to pair until your V3- 1 is paired.
Once paired, the dashboard will display “Connected” in blue. You may now begin using
the App with your device.

12
Settings
Press the gear icon to change settings for your V3-1.
•Username - Customize the name for your V3-1here. This name change will reflect
in the dashboard and connect pages.
•Password - Customize the password for the V3-1.
•Switch - Switch between MPH/KMH.
•Speed - Change the speed for the V3-1.
•Force - Change the Driving Force.
•Sensitivity - Change the Sensitivity for the V3-1.
•Set Dormant Shutdown Time - This setting allows you to set a time for your V3-
1to shutdown automatically.
Connect
Settings
Headlights
Skill/Safety Modes
Cycle between 3 different skill modes. Each mode has a different top speed and
sensitivity. The mode will only change if you are not using your V3- 1scooter.
•Low Mode - This mode is recommended for first time Tomoloo scooter users. In
this mode, the sensitivity and top speed are very low.
•Normal Mode - This mode is recommended for users that are comfortable using
Tomoloo scooters but are not ready for full speed and extra sensitive controls. In
this mode, the sensitivity and top speed are moderate.
•High Mode - This mode is recommended for everyday Tomoloo scooter users. In
this mode, the sensitivity and top speed are set to the maximum setting.
NOTE: Skill and safety mode must be selected. The Tomoloo will default to “Normal”
mode if another mode is not selected.

13
Headlights
Press “lights” to set a custom colour and brightness for your V3-1’s LED Lights. Simply
choose your desired colour from the colour wheel. Slide the “Brightness” bar to adjust
brightness. For your convenience, 4 basic colours have also been set as presents below
the brightness bar.
Cool Lights
The headlights will be Blue while you power on your hover board.
The headlights will be shining with the music while the Bluetooth connected.
Bluetooth Speaker
The V3-1 has powerful built-in wireless speakers so you can play your
music while riding.
Pairing the Speaker
1. Ensure your V3- 1 is turned off. If it is not, please turn off your scooter first before
pairing.
2. Turn on your V3-1and the speakers will announce that it’s waiting for the Bluetooth®
connection. This will indicate your V3-1speaker is now in pairing mode.
3. Place the V3-1 and the Bluetooth® device to which you would like to pair it within the
operating distance. We recommend keeping the two devices no further than 3 feet apart
during pairing.
4. Ensure Bluetooth® is enabled on your phone or music device. Refer to
manufacturer’s instructions for how to enable Bluetooth® on your device.
5. Once you have activated Bluetooth® on your device, select the option “music” from
the list of available Bluetooth® devices.
6. If required, enter the PIN code "000000" and confirm the entry.
7. Please note, pairing mode on the V3-1 will last for two minutes. If no devices are
paired after two minutes, the V3-1 speaker will automatically return to standby mode.
8. If pairing is unsuccessful, turn off the V3- 1 first and re-pair following the steps.

14
NOTE: Once you have paired the V3-1 speaker with a device, the speaker will remember
this device and will pair automatically when the device's Bluetooth® is activated and in
range. You do not need to re-pair any previously connected devices.
You can pair up to two multi-point devices. You can reconnect a previously paired device
without going through the pairing or PIN process on up to two devices.
Listening to Music
Once the V3-1speakers are paired to your device, you can stream music wirelessly to
them. Select the track you wish to listen to on your device to listen via the speakers. All
volume and track controls will be made using your music device. Should you encounter
any problems while streaming, please refer to your device’s user manual.
Riding your V3-1
FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS MAY LEAD TO
DAMAGE YOUR DEVICE, VOID YOUR MANUFACTURER WARRANTY, LEAD TO PROPERTY
DAMAGE, CAUSE SERIOUS BODILY INJURY, OR MAY LEAD TO DEATH.
Before using your device, be sure to familiarize yourself the operating procedures so
that you can keep your device in the best condition and ensure safety of yourself and
others.

15
Operating your Device
Make sure the device is fully charged before your initial use.
Stand directly behind your device and place one foot on the corresponding foot mat (as
described in the diagram below). Keep all your weight on your back foot still on the
ground, otherwise your device will begin to move, making it difficult to step on evenly
with your other foot. When you are ready, shift your weight to the foot already placed on
the device and step on with your second foot quickly and evenly (as described in the
diagram below).
Warning: Stay relaxed and step on quickly, confidently, and evenly. Imagine climbing
stairs, one foot, then the other. Look up once your feet are even.
Find your centre of gravity. If your weight is distributed correctly on the foot mats and
your centre of gravity is level, you should be able to stand on your device just as if you
were standing on the ground.
On average, it takes 3-5 minutes just to get comfortable standing on your device and
maintaining proper balance. Having a spotter will help you feel more secure. The V3-1is
an incredibly intuitive device; it senses even the slightest bit of motion, so having any
anxiety or reservation about stepping on may cause you to panic and trigger unwanted
movement.
When you first using your device, the fastest way to move on your desired direction is to
focus on that direction. You will notice that just thinking about which way you would like
to go will shift your centre of gravity, and that subtle movement will propel you in that
direction.
Your centre of gravity determines which direction you move, accelerate, decelerate, and
come to a complete stop. As described in the diagram below, tilt your centre of gravity in
the direction you wish to move.
To turn, focus on the direction you wish to turn and stay relaxed.
Warning: Do not tum sharply or at high speeds to avoid danger. Do not tum or ride
quickly along slopes, as it may cause injury.

16
The more comfortable you get on the device, the easier you will manoeuvre. Remember
at higher speeds, it is necessary to shift your weight to overcome the centrifugal force.
For bumps or uneven roads, bend your knees.
Move Backward
Stop
Move Forward
Note: Try staying relaxed and focus on finding your centre of gravity to maintain full
control of your scooter.
Dismounting your device can be one of the easiest steps, yet when done incorrectly,
may cause you to fall. To properly dismount, from a stopped position, lift one leg up and
set your foot back down on the ground (STEPPING BACK). Then step off completely as
described in the following diagram.
Warning: Make sure to lift your leg completely off the foot mat to clear the device when
stepping back to dismount. Failure to do so may send the V3-1 into a tailspin.
Note: If the V3-1isnot placed on a level surface, an alarm will sound and the warning
indicator will light up and prevent the V3- 1 from moving. Place the V3-1on a level
surface and try riding it again.

17
Weight and Speed limitations
Speed and weight limits are set for your own safety. Please do not exceed the limits
listed here in the manual.
•Maximum Weight: 265 lbs
•Minimum Weight: 44 lbs
•Maximum Speed: 9.3 mph
Warning: Overweight exertion on the device may increase possibility of injury or
product damage.
NOTE: To prevent injury, when max speed is reached, the V3-1 will beep to alert the user
and tilt the rider slowly back.
Operating Range
Please notice the V3-1 can travel a distance up to 9.3 miles on a fully charged battery in
ideal conditions. The following are some of the major factors that will affect the
operating range of your device.
Terrain: A smooth, flat surface will increase your driving distance, while driving uphill, as
well as rough or uneven terrain will reduce your distance significantly.
Weight: The weight of the user can affect driving distance; a lighter user will have further
range than a heavier user.
Ambient temperature: Please ride and store the device under recommended
temperatures, which will increase driving distance: battery life, and overall performance
of your device.
Maintenance: Reasonable battery charging and maintenance will increase the distance.
Overcharging the battery can reduce range.
Speed and Driving Style: Maintaining a moderate speed will increase your distance:
while traveling at high speeds for extended periods, frequent starts, stops, idling, along
with frequent acceleration and deceleration will reduce your overall distance.

18
Balance and Calibration
If the scooter is found to be unbalanced, you can follow the below steps to calibrate it.
In order to the balance calibration system work properly, please place the scooter on a
flat horizontal surface.
Press and hold the ON/OFF button for at least 5 seconds until the scooter buzzes.
The LED light on the deck will begin flashing red.
The red LED light on the deck will first start blinking and later stay on for a few seconds
more, after that lights will turn off automatically, at this point please press the ON/OFF
button to completely switch off the scooter.
Press the ON/OFF button the switch the scooter on again. At this point, the calibration
process will be complete.
Charging your V3-1
Charging the Device
Ensure that the charging port is clean and dry.
Open the charging port on your V3-1scooter.
Make sure that there is no dust, debris, or dirt inside the port.
Plug the charger into a grounded wall outlet.
Connect the cable with the power supply (100V ~ 240V; 50, 60 Hz).
Ensure the light on the charger is GREEN.
Align and connect the 3-pin charging cable into the charging port of the V3.
Yellow LED light flashing indicates charging under 50%.
Green LED light flashing indicates 50%-90% charging.
Green LED light stay solid without flashing indicates 90% or above charged.
A full charge may take up to 3-3.5 hours.
After fully charging your v3-1, unplug the charger from your device and from the power
outlet.

19
Safety Alerts
While riding your v3-1scooter, if there is a system error or illegal operation performed
with your device, the system cannot enter self-balancing mode, so the device will
prompt the user in a variety of ways.
You will notice the Running Indicator Light will turn RED and you will hear a beep sound
alerting you to take precaution and cease operation.
The following are common occurrences where you will hear the Safety Alerts. These
notices should not be ignored, but appropriate action should be taken to correct any
illegal operation, failure or errors.
•Prohibited riding surfaces (uneven, too steep, unsafe, etc.)
•When you step on the device, if the platform is tilted more than 10 degrees
forward or backward.
•Battery voltage is too low.
•The device is still charging.
•During operation, the platform self-initiates to tilt due to excess speed.
•Overheating, or motor temperature is too high.
•The device has been rocking back and forth over 30 seconds.
•System enters protection mode; the alarm indicator will light up and buzzer will
alarm (this typically occurs when the battery is about to run out of power).
•If the platform is tilted forward or backward more than 15 degrees, device will
power off.
•If any or both tires are blocked, the device will stop after 2 seconds.
•When the battery level has depleted below protection mode, the device engine
will power off after 15 seconds.
•While sustaining a high discharge current during use (such as driving up a steep
slope for a long period of time), the device engine will power off after 15 seconds.

20
Product Warnings
Safe Riding
Children, the elderly, and pregnant women should not ride theV3-1.
Do not ride after drinking or using drugs.
Do not carry items when you are riding the device.
Prior to each use, inspect the v3-1and ensure it has been maintained correctly and is
functioning properly.
When riding the V3-1, please give way to pedestrians.
When riding the V3-1, please comply with local traffic laws and regulations. Remember,
the V3-1is a motor vehicle, and is treated as such by local law. You can and will be
arrested for Drunk Driving. Many cities have restrictions on where you can drive motor
vehicles, and additional restrictions on driving non-automobiles on streets and
highways.
Please be alert to things in front and far away from you. Keeping good vision will help
you ride the V3-1safety.
Make sure your feet are always placed securely on the pads.
TheV3-1cannot be ridden by two or more people. Only one person can operate the V3-1
at a time.
The rider may not be less than 45 Ibs. TheV3-1is unable to operate properly with such a
rider, especially on downhill terrains where the driver will be unable to reduce speed or
stop safety.
When you ride the V3-1along with other users, please keep a certain distance between
each other to avoid a collision.
You should always keep in mind that, while on the device, your height has increased
several inches. Be careful when you pass though doorways.
When turning, please maintain balance.
Do not allow distractions when riding the device, such as answering the phone or
engaging in any other activities.
Do not ride in the dark.
Avoid riding on particularly in the rain or on smooth surfaces, such as snow, ice, and
other slippery floors.
Do not ride on roads with obstacles (such as twigs, littler, small stones, etc.).
Avoid riding in narrow spaces or on steep slopes.
Avoid riding around flammable gas, steam, liquid, or dust that could cause fire.