Top shelf Orthopedics Boa Universe User manual

1851 East Paradise Road, Suite A
Tracy, CA 95304
Phone: [phone] • Fax: [phone]
topshelforthopedics.com
BOA UNIVERSE
Instructions for Use
Please read these instructions completely and carefully
before applying this product. Correct application is important
for proper function of this product.
Use and Care:
Hand wash in cold water using mild soap. Rinse thoroughly and air dry. If not rinsed thoroughly,
soap residue may cause skin irritation and material breakdown.
Warning:
This product is to be used under the supervision of a medical health professional. This device is not
intended for unsupervised public use. If you experience any pain, swelling, sensation changes, or
any unusual reactions while wearing this product, consult your medical professional immediately.
Warranty:
Top Shelf Orthopedics will replace all or part of the brace for defects in material or workmanship
for the period of six months from the date of purchase.
Caution:
Federal Law (USA) restricts this device for sale by or on the order of a licensed healthcare professional.
P/N: 025704 Rev A

BOA UNIVERSE
Instructions for Use
The BOA UNIVERSE is a modular back brace that allows for customization of
various components to address multiple conditions of the spine.
1. The BOA UNIVERSE 627 uses a low prole posterior rigid panel to provide support to
the lumbar region.
2. The BOA UNIVERSE 631 uses a tall posterior rigid panel to provide support to the lumbar
and thoracic region up to the level of T-9.
3. The BOA UNIVERSE 637 provides the maximum support both posteriorly and laterally to
the lumbar and thoracic region up to T-9 with the application of 3 rigid panel assemblies
to control motion in the sagital and the coronal plane.
Components of the Brace
* Pull handle with drawstring & size tag on left side.
Please read these instructions completely and carefully before applying this product.
Correct application is important for proper function of the brace.
1.
2.
3.
Application of BOA UNIVERSE
1. Apply the belt assembly, securing it with the hook and loop closure tabs on the end
components. (Adjust the lateral panels as necessary for position and function - BOA
UNIVERSE 637 only.)
2. Release the drawstring tab from the left side and pull it away from the body to the side,
advancing the drawstring tensioning device to the desired level of compression and comfort
for the patient.
Indications: Acute & chronic low back pain, post-operative support, activity-related low back pain, disc herniation.
Contraindications: Pregnancy, circulation, pulmonary, cardiovascular or skeletal conditions which have the risk to be made worse as a
result of compression and/or pressure.
Inside View
Lateral Oval Panels (X2)
Image A
Right Left
Image C (Inside View)
Anterior End Components
Sizing and adjustment of the BOA Belt assembly
1. Determine the size by measuring your waist (Image A). Over clothes at widest point.
2. Turn the belt assembly over to view the size markings on the undersurface.
3. Cut both sides of the belt assembly to the desired length based on the waist measurement
(Image B). NOTE: Cut the belt slightly longer than measurement. Test t and trim as needed.
4. Apply the end tab components and cover the trimmed edges with the elastic pouch (Image C).
5. The oval lateral rigid panels can be relocated where desired by the wearer with hook/loop tabs
affixing to the outer fabric of the belt panels (Image D).
Image B (Inside View)
Front View Back View
Pull
tab for
drawstring.
BOA UNIVERSE 637 (Outside View)
BOA UNIVERSE 631 (Outside View)
BOA UNIVERSE 627 (Outside View)
Left Right
Left Right
Left Right
Right Left
Right Left
Size Tag
Image D (Outside View)
SM 25” - 30”
MD 30” - 35”
LG 35” - 40”
XL 40” - 45”
2X 45” - 50”
3X 50” - 55” *
*(PART #510310 required for 3X size)
Size Measurement