Topcon SP-1P Service manual

According to each facility’s needs, the examiner can select from
two courses: [Free Style Course] & [Sequence Course]
Free Style Course
Input patient ID, name, positions
to photograph, OD/OS.
Suitable for a facility where doctors
give orders for a position to
photograph.
Immediately after switching on
the device, the examiner can
start photography.
Suitable for a facility where mostly
photographs central cornea.
Peripheral area can be also selected.
Photograph
these positions
for this patient.
If central part
is difficult to
photograph
↓
Go to
peripheral area
Sequence Course
SP-1P Quick Reference Manual

Free Style/Sequence Course
Sequence Course
Photography Screen /
Analyzed Result
Screen Explanation
Sequence Course：
Can select photograph
position from
[Center]/[Panorama]/[Multi
points], and photograph eye
from [OS/OU/OD].
SP-1P Quick Reference Manual
CENTER button: Centering photography is set.
Panorama button: Panorama photography that is to photograph
3 points around the center is set.
Multi points button: Multi points photography that is to
photograph specified circumference position is set.
Photograph eye can be selected from
[OS(Left eye)/OU(Left&Right eye)/OD(Right eye)].

Changing
photograph
position
Automatically the analyzed
result will be shown.
Touch [printer] button to
show the printing item list.
*To photograph again,
touch [Rephotographing]
button.
Display Result
List of printing items will be
shown. Touch [printer]
button to printout / output
data.
Start Photograph
Free Style Course
Eye height mark
Press the [Up/Down]
button to adjust the
chinrest height until the eye
height mark of the chinrest
reaches the same height as
the patient’s eye.
Up/Down
chinrest
Default is set to photograph
central cornea.
Touch the [Photographing
Position Selecting Button]
to change the photograph
position.
Immediately after switching
on the device, the examiner
can start photography.
Touch central
cornea
Printout / Output
SP-1P Quick Reference Manual
Photographing
Position Selecting
Button

Select Photograph
Eye and Position
Start Photograph
Display Result
Direct / Barcode input available.
*Without inputting data, you can
move to the photography setting
screen.
Photography
setting screen
Sequence Course
Input patient ID, name, positions
to photograph, OD/OS.
Input Patient Info.
Photograph position can be
selected from [center],
[panorama], [multi points].
List of printing items will be
shown. Touch [printer]
button to printout / output
data.
Printout / Output
SP-1P Quick Reference Manual
Up/Down
chinrest
Touch central
cornea
Eye height mark
Press the [Up/Down]
button to adjust the
chinrest height until the eye
height mark of the chinrest
reaches the same height as
the patient’s eye.
Automatically the analyzed
result will be shown.
Touch [printer] button to
show the printing item list.
*To photograph again,
touch [Rephotographing]
button.

Touch central cornea.
Then automatically
photography starts.
Touch and move to next
position and photograph. The
green fixation target moves
and let the patient stare at
this green fixation target.
*For rephotographing, touch
button.
Touch again and move
to next position and then
photograph.
Touch analyze button .
The integrated 3 images of
panorama will be shown.
Free Style Course Sequence Course
Panorama Photo Panorama Photo
SP-1P Quick Reference Manual

Free Style Course Sequence Course
Multi points Multi points
Select the photograph
position and then
photograph by touching
Select the photograph position.
Then automatically the screen
will change to photography
screen. button.
SP-1P Quick Reference Manual
Center Panorama Multi points
*Green fixation targets are image.
The green fixation targets are image seen from the patient.
Before photograph, please make sure that the patient is fixating at the fixation
target properly and focus is done properly as well. If the device touches patient
nose, try again the photography by slightly tilting patient head.
**Please refer the user manual for detail instruction.