Topnics TP-PCA7201 User manual

TP-PCA7201 User Manual
Form one-stop shopping
your best choice and professional partner
http://www.topnics.com
Tel : [phone]
Fax : [phone]
Email : [e-mail]
1/4
TP-PCA7201 User Manual
I: Introduction
Thank you for purchasing our products, in order to give you a clearer understanding of product
performance and normal maintenance of this product, please read these instructions carefully before use.
II: Applications: garden street and home security, etc.
III: Features
●130W high-resolution color CMOS chip
●Support 32GB TF card
●USB2.0 Interface
●Support PC-CAM function
●support U disk function
●passive infrared human motion detection automatic recording function
●Support cycle override feature
●Recording support time date stamp
●one matrix 10W super bright white LED Light
●Support WindowsME / Windows2000 / WindowsXP / Windows Vista, win7 system
IV: Function Key Description

TP-PCA7201 User Manual
Form one-stop shopping
your best choice and professional partner
http://www.topnics.com
Tel : [phone]
Fax : [phone]
Email : [e-mail]
2/4
1: TF card slot
2: PIR sensor area and working lights
3: DC power input connector
4: light control sensor, control matrix LED white lights
lit and off (when PIR effective, when the light dark, the
white lights, when the light bright, the white light does
not shine)
5: White matrix LED lights
V: Operating Instructions
5.1: Video mode
5.1.1: When the power supply is not plugged in, insert the TF card in the correct direction
5.1.2: Install the product in the place to be monitored
5.1.3: connect an external power supply, The yellow lights at PIR sensors lit indicates normal boot into
standby mode.
5.1.4: In about one minute after power, PIR will stabilize at this time if anyone within range PIR
movement will be triggered recording, this time the red light in the PIR steady [(At this point, if the light
is weak, white LED lights, the light bright the white LED light dose not shine], blue lights flashing, it
indicates that it is recording, Without PIR sensors it stop recording. If people have been walking at PIR,
PIR is always active (the light dark, white light always lit)it always recording the longest three
minutes / segment packaging saved once.
5.1.5: After the PIR sensor off , the red light enters the standby state, it began recording when someone
move in the PIR sensor area
5.2 connected to the computer
5.2.1: PC-CAM mode (this mode can not insert TF card)
After installing the driver of the auto products were equipped with data cable connected to the computer,
and then turn on the power switch, the computer will buzz loudly, it was about 10 to second (and

TP-PCA7201 User Manual
Form one-stop shopping
your best choice and professional partner
http://www.topnics.com
Tel : [phone]
Fax : [phone]
Email : [e-mail]
3/4
computer configuration dependent) (XP system on my computer, a camera icon will appear)
Click the camera icon to watch the images. You can also open the video camera equipment with other
applications in. WIN7 system requires additional software to open the subject
Note: This product can be detected automatically install the required drivers without the need to install
the driver
5.3: U disk mode (this mode to insert TF card)
After TF card installed , connected the product to the computer with equipped random data cable, the
computer will be prompted to find the new hardware and automatically install the driver after the
installation is completed there will a removable disk displayed on the computer, as shown below:
Can transfer files to upload or under.
5.4: Modified Date
Put the TF card into the machine connected to a computer,
See TF card as a file, open the text file userconfig.txt, 2012-01-01 00:00:00 modify the corresponding
parameters (year - month - day time - minutes - seconds) save, disconnect the computer connection,
reconnect the product turned on the power to set time well
Note: When you plug the card must first disconnect the power, to avoid damage to TF card and damage
data, when set the time setting thecurrent time fast about 20 seconds (according it takes time to unplug
the cable, turn on the power again)
VI: electrical parameters
the control of white LED light l: 10-25LUX
quantity of White light LED: one 10W lamp matrix
White LED light irradiation distance: 5-10 meters
Video format: AVI
Video resolution: 1280 * 72025-30 frame / S
Video recording time: According to the effective time of PIR sensors, the longest three minutes / segment

TP-PCA7201 User Manual
Form one-stop shopping
your best choice and professional partner
http://www.topnics.com
Tel : [phone]
Fax : [phone]
Email : [e-mail]
4/4
Loop recording: When the card is full automatically deleted expiration of the previous paragraphs of
videos
PIR detection range: 4-6 meters
TF card: 32GB CLASS4 more genuine TF card
External power supply: DC: 12V / 2A
Working current: 1500MA MAX
Working temperature: -10-50 °C
VII: Problems and Solutions
1: PIR induction card, red light, blue light is also lit, no video (not flashing blue light)
Answer: see the card is plugged in, the card is not plugged in or not plugged in, the blue light is not
recording. Unplug the card on the computer to see whether is OK, whether the TF card is genuine
manufacturers of memory card, the card will not be inferior work, but generally on a computer to
transfer files and no problems.
2: The image is blurred
Check that whether the camera Dirty