Toro 570Z Series User manual

Reliability is simply stated in
570Z Series’20 years of solid
performance. Add to that its
extensive product line offering and
you have a successful solution for
every application need.
570Z Series sprinklers have an
impressive track record, offering
operation that you can count on.
Its solid construction and design
assure dependability. These
fixed-sprays have worked well
for 20 years and will continue
to do so.
With 570, you get flexibility. Select
variable arc nozzles (VANs) for a
one-nozzle-fits-all solution, or
choose MPR nozzles for complete
precision. For further versatility,
570Z Series includes microspray
nozzles, shrub adapters, and
extenders and risers.
SPRINKLERS
570Z Series
RESIDENTIAL • COMMERCIAL

Specifications
•Flow rate: 0.05–4.58 GPM
(0,2–17 LPM)
•Recommended operating
pressure: 20–50 psi
(1,4–3,5 Bar)
•Maximum operating pressure:
75 psi (5,2 Bar)
•1⁄2" (13mm) female-threaded
inlet
570Z Series
Sprinklers
0'–17' (0–5m) Radius
Features
•Zero-flush seal prevents
flushing on pop-up
•Retraction flushing clears debris
for reliable pop-down
•Low-pressure sealing at 15 psi
(1 Bar)
•Small, 2" (50mm) diameter cap
is less visible, reducing damage
from exposure or vandals
•Accepts all Toro spray
nozzles—including 570 MPR
Plus, Toro variable arc, bubbler
and low-angle nozzles
•Accepts Maxijet®nozzles for
low-application-rate irrigation
•All bodies shipped with a flush
plug in place for ease of
flushing and riser pull up
•Ratcheting riser feature for easy
and reliable arc adjustment
•Non-side-inlet models available
on 6" (150mm) and 12"
(300mm) sprinkler bodies for
sandy soils or applications
prone to high-pressure surges
and spikes
•Check valve prevents low-head
damage and keeps laterals
charged with water (optional)
•Durable engineering
plastic construction
•Stainless steel retraction spring
•Recycled water
indicators available
•Two-year warranty
•Dimensions:
•Body diameter:
–13⁄8" (35mm) on 2P, 3P,
4P, 6P and 6P-SI models
–15⁄8" (41mm) on 12P
models
–13⁄4" (44mm) on 12P-SI
models
•Cap diameter: 2" (50mm)
•Side inlet: 43⁄4" (120mm)
from top of sprinkler to center
of side inlet
•Check valve maintains up to 10'
(3m) elevation change (optional
on side-inlet models except 2"
[50mm])
570Z Series RESIDENTIAL •COMMERCIAL
Ratcheting riser
lets you fine-tune
after installation
Zero flush seal,
on retraction
Small (2" cap
diameter) solid
black cap is less
visible, reducing
damage from
exposure
Side inlet available on
non-Check-O-Matic
6" and 12" models
(not illustrated)
Optional:
Check-O-Matic seal
installed into riser
prevents low-head
drainage
Pop-up Height Optional Optional Optional
12—12" (300mm) SI—Side Inlet* COM—Check-O-Matic** E—Effluent
6—6" (150mm)
4—4" (100mm)
3—3" (76mm)
2—2" (50mm)
Example: A 570Z Series Sprinkler with a pop-up height of 6" (150mm)
and a check valve, you would specify: 570Z-6P-COM
*Available for 6" (150mm) and 12" (300mm) models.
**Available with non-side inlet models except 2" (50mm).
Maxijet is a registered trademark of The Toro Company.
Specifying Information
570Z XXPCOMSI E
2
2

Model Pop-up Height Optional Optional Optional
Z—Lawn Pop-up 4P—4" (100mm) SI—Side Inlet COM—Check E—Effluent
& High-pop 6P—6" (150mm) Valve*
S—Shrub 12P—12" (300mm)
Example: A 570Z PRX Series Sprinkler with a pop-up height of 6" (150mm)
with a side-inlet option, would be specified as: 570Z-6P-SI-PRX
*Available with non-side inlet only.
X-Flow is a trademark of The Toro Company.
570XXXX SI COM EPRX
Specifying Information
570Z PRX Series
Sprinklers
0'–15' (0–4,6m) Radius
Features
•Patented in-riser pressure
regulator
•Maintains constant 30 psi
(2 Bar) outlet pressure
•Eliminates misting and
fogging caused by pressures
above 30 psi (2 Bar)
•Patented X-Flow high-flow
shut-off device built into
the riser
•Restricts water loss if the
nozzle is removed or
damaged, eliminating
potential erosion or
safety issues
•Allows for nozzle and filter
replacement or maintenance
while the system is running
•PRX stamped on cap for
easy identification
•All bodies shipped with a flush
plug in place for ease of
flushing and riser pull up
•Zero-flush seal prevents
flushing on pop-up
•Retraction flushing clears debris
for reliable pop-down
•Side-inlet models available
on 6" (150mm) and 12"
(300mm) sprinkler bodies for
easier installation and
vandal resistance
•Non-side-inlet models available
on 6" (150mm) and 12"
(300mm) sprinkler bodies for
sandy soils or applications
prone to high-pressure surges
and spikes
•Check valve prevents low-head
damage and keeps laterals
charged with water (optional)
•Recycled water models
available—cap molded in
lavender-colored plastic for
permanent identification
•Cap cover available for new
or existing installations
•Five-year warranty
Specifications
•Flow rate: 0.05–3.30 GPM
(0,2–17 LPM)
•Recommended operating
pressure: 30–75 psi (2–5,2 Bar)
•Maximum operating pressure:
75 psi (5,2 Bar)
•1⁄2" (13mm) female-threaded
inlet
•Dimensions:
•Body diameter:
–13⁄8" (35mm) on 4P, 6P
and 6P-SI models
–15⁄8" (41mm) on 12P models
–13⁄4" (44mm) on 12P-SI
models
•Cap diameter: 2" (50mm)
•Side inlet: 43⁄4" (120mm) from
the top of sprinkler to center
of side inlet
•Check valve maintains up to 7'
(2,1m) elevation change
(optional on side-inlet models)
Notes: You must have a nozzle
screen or flush plug in place to
deactivate the X-Flow function.
Without either, there will not be
flow through the sprinkler.
570Z PRX not recommended for
use with PCD nozzles.
Nozzle filter screen
X-Flow™shut-off device
Optional
side inlet on
non-Check-O-Matic
models only (not
illustrated)
Optional
Check-O-Matic
(COM) seal
prevents low-head
drainage
In-riser pressure
regulator maintains
constant 30 PSI
outlet pressure
Zero-flush seal
prevents flushing
on pop-up
3
3

8' Series
Pattern psi GPM Radius
90°
180°
270°
360°
10' Series
psi GPM Radius
12' Series
psi GPM Radius
20 0.90 13
25 0.95 14
30 0.99 14
35 1.06 14
40 1.13 14
45 1.15 15
50 1.20 15
20 1.45 12
25 1.55 13
30 1.65 13
35 1.76 13
40 1.86 13
45 1.97 13
50 2.06 14
20 2.01 11
25 2.16 12
30 2.32 12
35 2.45 13
40 2.62 13
45 2.77 13
50 2.91 14
20 2.92 12
25 3.09 12
30 3.22 12
35 3.45 13
40 3.65 14
45 3.86 13
50 3.88 13
15' Series
psi GPM Radius
20 1.11 13
25 1.22 14
30 1.34 15
35 1.40 15
40 1.54 16
45 1.65 16
50 1.71 16
20 1.82 13
25 2.01 14
30 2.22 14
35 2.33 15
40 2.56 15
45 2.61 15
50 2.86 15
20 2.48 12
25 2.75 13
30 3.04 13
35 3.21 14
40 3.48 14
45 3.64 15
50 3.87 15
20 3.11 12
25 3.51 13
30 3.82 13
35 4.12 14
40 4.42 14
45 4.56 14
50 4.92 14
17' Series
psi GPM Radius
570 Variable Arc Nozzle Performance Data—U.S.
■ = Data not yet available.
570 Variable Arc
Nozzles (TVANs)
8'–17' (2,4–5,2m)
Radius
Features
•Exclusive matched precipitation
rates (MPR) across entire radius
range (within and between
families)
•Fits all Toro 570Z sprinkler
bodies
•Infinitely adjustable arc from
0°–360°
•Five different nozzles for
various radii
•Color-coded nozzles allow for
easy identification
•8' (2,4m), green
•10' (3,0m), blue
•12' (3,7m), brown
•15' (4,6m), black
•17' (5,2m), gray
•Exceptional uniform coverage
•Adjustment screw allows up to
25% radius reduction
•Flow increases or decreases
proportionately with radius
adjustment (maintaining MPR)
•Unique grip-and-turn
adjustment—wet or dry
•Fine-mesh, snap-in green filter
screens, prevent clogging
Specifications
•Recommended operating
pressure: 20–50 psi
(1,4–3,5 Bar)
•Maximum operating pressure:
75 psi (5,2 Bar)
Specifying Information
TVAN XX
Model Radius
TVAN—Toro Variable Arc Nozzle 8—8' (2,4m) 15—15' (4,6m)
10—10' (3m) 17—17' (5,2m)
12—12' (3,7m)
Example: A Variable Arc Nozzle with a 10' radius,
would be specified as: TVAN-10
Note: To specify a TVAN nozzle with a 570Z sprinkler body, attach the body
specification (pgs. 2–4) before the above nozzle specification.
8' 10' 12' 15' 17'
4
4

5
5
•Low-flow rates reduce runoff
in compacted soils and allows
deep percolation in sandy soils
•Nozzles and pressure-
compensating screens are
color-coded by flow rate for
easy identification
•Three radii and flow rates:
•10 GPH—4', blue
(40 LPH—1,2m)
•15 GPH—5', green
(57 LPH—1,5m)
•24 GPH—6', red
(91 LPH—1,8m)
•Four nozzle patterns:
•90°quarter-circle
•180°half-circle
•360°full-circle
•Center strip
Maxijet®Microspray
Nozzles
Features
•Ideal for ground cover,
flowerbeds and low-water-use
plants
•Nozzle, adapter and pressure-
compensating screens are
pre-assembled
•Pressure compensation
provides uniform application
over elevation changes and
long runs
•Flushmount Top-Hat
design allows the nozzle
assembly to retract into the
body (on pop-up models)
for added debris and
vandal resistance
Specifications
•Flow rate: 10–31.6 GPH
(40–119,6 LPH)
•Recommended operating
range: 20–50 psi (1,4–3,5 Bar)
•Maximum operating pressure:
50 psi (3,5 Bar)
Note: To specify a Maxijet nozzle with a 570Z sprinkler body, attach the body
specification (pgs. 2-4) before the above nozzle specification.
Maxijet is a registered trademark of The Toro Company.
MJ XXXX
Description Radius Arc
MJ—Maxijet Microspray 4—4' (1,2m) Q—90°F—360°
Nozzle Assemblies 5—5' (1,5m) H—180°CST—Center Strip
6—6' (1,8m)
Example: A 4' (1,2m) radius Maxijet Microspray Nozzle Assembly
with a 180°arc, would be specified as: MJ-4H
Specifying Information
6' 5' 4' 6' 5' 4'
10 GPH Series
with 0°Trajectory—U.S. ●
Pattern Description psi GPH Radius
MJ-4Q 20 10.5 4.5
30 12.8 5.0
40 14.6 5.5
MJ-4Q-PC 20-50 10.0 4.5
MJ-4H 20 10.5 4.0
30 12.8 4.5
40 14.6 4.5
MJ-4H-PC 20-50 10.0 4.0
MJ-4F 20 10.5 4.0
30 12.8 5.0
40 14.6 5.0
MJ-4F-PC 20-50 10.0 3.5
MJ-4CST 20 10.5 1.5 x 3
30 12.8 5.5 x 3
40 14.6 6.0 x 3.5
MJ-4CST-PC 20-50 10.0 4 x 3
15 GPH Series
with 0°Trajectory—U.S. ●
Pattern Description psi GPH Radius
MJ-5Q 20 16.0 6.5
30 19.9 7.0
40 22.7 7.5
MJ-5Q-PC 20-50 15.0 5.5
MJ-5H 20 16.0 6.5
30 19.9 7.0
40 22.7 7.5
MJ-5H-PC 20-50 15.0 5.5
MJ-5F 20 16.0 4.5
30 19,9 5.0
40 22.7 5.0
MJ-5F-PC 20-50 15.0 5.0
MJ-5CST 20 16.0 4.5 x 3
30 19.9 5.5 x 3
40 22.7 6.5 x 3.5
MJ-5CST-PC 20-50 15.0 5 x 3
24 GPH Series
with 0°Trajectory—U.S. ●
Pattern Description psi GPH Radius
MJ-6Q 20 23.5 7.0
30 29.1 8.0
40 31.6 8.5
MJ-6Q-PC 20-50 24.0 6.5
MJ-6H 20 23.5 5.0
30 29.1 5.5
40 31.6 6.0
MJ-6H-PC 20-50 24.0 5.5
MJ-6F 20 23.5 5.0
30 29.1 6.5
40 31.6 7.5
MJ-6F-PC 20-50 24.0 5.5
MJ-6CST 20 23.5 5.5 x 3
30 29.1 6.5 x 3.5
40 31.6 7.0 x 3.5
MJ-6CST-PC 20-50 24.0 6 x 3
Radius shown in feet.
570Z Series Maxijet Nozzle Assemblies Performance Data

• 5' (1,5m) nozzles adjust
to 3' (1m)
• Standard and special spray
patterns
• Patterns for small areas:
•Full set of arcs for 10' (3m),
8' (2,4m) and 5' (1,5m) radius
nozzles
• 4' x 18' (1,2 x 5,5m) side strip
ideal for medians
• 2' x 6' (0,6 x 1,8m) for small
planter beds and other
narrow areas
• Five levels of trajectory
• Convenient nozzle packaging—
nozzles and screens packed
separately in attached bags
• Fine-mesh, snap-in filter
screens, prevent clogging of
lower gallonage nozzles
• Adjustment screw allows up to
25% reduction in radius and
complete shutoff
Specifications
•Flow rate: 0.05–4.58 GPM
(0,2–17 LPM)
•Recommended operating
pressure range: 20–50 psi
(1,4–3,5 Bar)
•Maximum operating pressure:
75 psi (5,2 Bar)
570Z MPR Plus
Spray Nozzles
Features
•Matched precipitation rates
ensure all nozzles (every radius
and pattern) apply water at
approximately the same rate
•Low-flow rates allow for more
sprinklers to be placed on the
same zone
•Free preinstalled PCDs
eliminate fogging, conserve
water and provide precise
flow rates (also available
without PCDs)
•Color-coding by radius for
easy identification
•Complete selection of arcs for
all radius options—full, 3⁄4, 2⁄3, 1⁄2,
1⁄3and 1⁄4
•Precise radius/flow adjustment
will not lose adjustment
Radius adjustment
screw provides 25%
radius reduction and
complete shutoff
Threaded to fit any Toro
570 pop-up body, riser,
extender or adapter
Free pressure-compensating
device maintains
constant performance
Color-coded band to
indicate radius
Molded-in opening
to ensure true matched
precipitation rates
Radius Arc Optional
5—5' (1,5m) Q—90°F—360°PC—Pressure
8—8' (2,4m) T—120°EST—End Strip Compensation
10—10' (3,0m) H—180°CST—Center Strip
12—12' (3,7m) TT—240°SST—Side Strip
15—15' (4,6m) TQ—270°
Example: A 570 MPR Plus Nozzle with a spray of 10' (3m), 180°arc
and pressure compensation, would be specified as: 10-H-PC
Specifying Information
XX PCXXX
Note: To specify an MPR Plus nozzle with a 570Z sprinkler body, attach the body
specification (pgs. 2–4)) before the above nozzle specification.
5' 8' 12' 10' 15' Special
Patterns
White Red Red and Metal
15' (4,6m) Series 8' 5' (1,5m) Series
(2,4m) Series
12' (3,7m) Series 4' x 30' SST 2' x 6'
(1,2 x 9,1m) (0,6 x 1,8m) SST
10' (3m) Series 4' x 18' SST 10°Stream Spray Series
(1,2 x 5,5m)
4' x 30' (1,2 x 9,1m) CST 35°Stream Spray Series
Stream Bubblers Flood Bubbler Series
Flat-Spray Flat-Spray, Low
(Non-MPR) Gallonage (Non-MPR)
4' x 30' (1,2 x 9,1m) EST
9' x 18' (2,7 x 5,5m) SST
Note: Screens provided with nozzle.
Refer to current Parts Breakout Book, (Form No. 368-0044) for more information.
Nozzle Screens
Apex at 30 psi (2 Bar)
Nozzle Series 27°23°12°5°0°
15' (6m) 4' 8" (1,4m)
12' (3,7m) 3' 7" (1,1m)
10' (3m) 2' 4" (0,7m)
8' (2,4m) 2' 2" (0,66m)
5' (1,5m) 1' 6" (0,46m)
Maximum Height of Spray
6
6

5' Series with 0° Trajectory
Prec. Rate*
Pattern Desc. psi GPM Radius ▲▲■■
5-Q 20 0.05 4 1.40 1.21
90°30 0.09 5 1.61 1.40
40 0.12 6 1.78 1.54
50 0.15 6 1.86 1.62
5-Q-PC 30-40 0.09 5 1.61 1.40
40-75 0.10 5 1.79 1.55
5-T 20 0.07 4 1.47 1.27
120°30 0.12 5 1.61 1.40
40 0.16 6 1.78 1.54
50 0.20 6 1.86 1.62
5-T-PC 30-40 0.12 5 1.61 1.40
40-75 0.13 5 1.79 1.55
5-H 20 0.10 4 1.40 1.21
180°30 0.19 5 1.70 1.47
40 0.23 6 1.70 1.47
50 0.27 6 1.68 1.45
5-H-PC 30-40 0.18 5 1.61 1.40
40-75 0.20 5 1.79 1.55
5-TT 20 0.15 4 1.57 1.36
240°30 0.25 5 1.68 1.45
40 0.30 6 1.66 1.44
50 0.35 6 1.63 1.41
5-TT-PC 30-40 0.23 5 1.54 1.34
40-75 0.27 5 1.81 1.57
5-TQ 20 0.20 4 1.86 1.61
270°30 0.29 5 1.73 1.50
40 0.34 6 1.68 1.45
50 0.40 6 1.66 1.44
5-TQ-PC 30-40 0.26 5 1.55 1.34
40-75 0.29 5 1.73 1.50
5-F 20 0.25 4 1.75 1.51
360°30 0.38 5 1.70 1.47
40 0.45 6 1.66 1.44
50 0.53 6 1.65 1.43
5-F-PC 30-40 0.35 5 1.57 1.36
40-75 0.39 5 1.75 1.51
12' Series with 23°Trajectory
Prec. Rate*
Pattern Desc. psi GPM Radius ▲▲■■
12-Q 20 0.40 11 1.48 1.28
90°30 0.50 12 1.55 1.35
40 0.60 13 1.64 1.42
50 0.63 13 1.67 1.44
12-Q-PC 30-40 0.48 12 1.49 1.29
40-75 0.53 12 1.65 1.43
12-T 20 0.57 11 1.58 1.37
120°30 0.72 12 1.68 1.45
40 0.87 13 1.87 1.62
50 0.97 13 1.93 1.67
12-T-PC 30-40 0.64 12 1.49 1.29
40-75 0.70 12 1.63 1.41
12-H 20 0.95 11 1.76 1.52
180°30 1.09 12 1.69 1.47
40 1.30 13 1.72 1.49
50 1.55 14 1.77 1.53
12-H-PC 30-40 0.96 12 1.49 1.29
40-75 1.05 12 1.63 1.41
12-TT 20 1.12 11 1.55 1.35
240°30 1.45 12 1.69 1.46
40 1.63 13 1.75 1.52
50 1.80 13 1.79 1.55
12-TT-PC 30-40 1.28 12 1.49 1.29
40-75 1.40 12 1.63 1.41
12-TQ 20 1.05 11 1.42 1.23
270°30 1.55 12 1.61 1.39
40 1.65 13 1.58 1.36
50 1.80 13 1.59 1.38
12-TQ-PC 30-40 1.44 12 1.49 1.29
40-75 1.60 12 1.66 1.44
12-F 20 1.67 11 1.54 1.34
360°30 2.19 12 1.70 1.47
40 2.35 13 1.68 1.46
50 2.70 13 1.79 1.55
12-F-PC 30-40 1.92 12 1.49 1.29
40-75 2.10 12 1.63 1.41
10' Series with 12°Trajectory
Prec. Rate*
Pattern Desc. psi GPM Radius ▲▲■■
10-Q 20 0.30 9 1.66 1.44
90°30 0.40 10 1.79 1.55
40 0.50 11 1.85 1.60
50 0.60 12 1.86 1.62
10-Q-PC 30-40 0.33 10 1.48 1.28
40-75 0.37 10 1.66 1.43
10-T 20 0.42 9 1.74 1.51
120°30 0.52 10 1.75 1.51
40 0.65 11 1.80 1.56
50 0.75 12 1.75 1.51
10-T-PC 30-40 0.44 10 1.48 1.28
40-75 0.50 10 1.68 1.45
10-H 20 0.60 9 1.66 1.44
180°30 0.71 10 1.59 1.38
40 0.85 11 1.57 1.36
50 0.99 12 1.65 1.43
10-H-PC 30-40 0.66 10 1.48 1.28
40-75 0.75 10 1.68 1.45
10-TT 20 0.71 9 1.47 1.27
240°30 0.97 10 1.63 1.41
40 1.10 11 1.67 1.45
50 1.19 11 1.65 1.43
10-TT-PC 30-40 0.89 10 1.49 1.29
40-75 1.00 10 1.68 1.45
10-TQ 20 0.82 9 1.51 1.31
270°30 1.04 10 1.55 1.34
40 1.20 11 1.62 1.41
50 1.35 11 1.66 1.44
10-TQ-PC 30-40 0.99 10 1.48 1.28
40-75 1.09 10 1.63 1.41
10-F 20 1.11 9 1.72 1.49
360°30 1.49 10 1.67 1.44
40 1.61 11 1.63 1.42
50 1.85 11 1.71 1.48
10-F-PC 30-40 1.33 10 1.49 1.29
40-75 1.51 10 1.69 1.46
Special Patterns
Special Patterns Prec.
Pattern Desc. psi GPM Width Length Rate*
4-EST 20 0.38 3' x 12' 2.03
30 0.45 4' x 15' 1.44
40 0.53 5' x 18' 1.13
50 0.60 6' x 20' 0.96
4-EST-PC 30-40 0.43 4' x 15' 1.38
40-75 0.50 4' x 15' 1.61
4-CST 20 0.75 3' x 24' 2.01
30 0.90 4' x 30' 1.44
40 1.04 4' x 30' 1.67
50 1.16 4' x 31' 1.80
4-CST-PC 30-40 0.86 4' x 30' 1.38
40-75 1.00 4' x 30' 1.61
9-SST 20 1.00 9' x 18' 1.19
30 1.20 9' x 18' 1.43
40 1.38 9' x 20' 1.48
50 1.55 10' x 22' 1.36
9-SST-PC 30-40 1.10 9' x 18' 1.31
40-75 1.20 9' x 18' 1.43
4-SST 20 0.65 4' x 24' 1.30
30 0.90 4' x 30' 1.44
40 1.04 4' x 32' 1.56
50 1.16 5' x 33' 1.35
4-SST-PC 30-40 0.88 4' x 30' 1.41
40-75 1.00 4' x 30' 1.61
2-SST 20 0.08 2' x 5' 1.54
30 0.09 2' x 6' 1.44
40 0.10 2' x 7' 1.38
50 0.12 3' x 7' 1.10
2-SST-PC 30-40 0.09 2' x 6' 1.44
40-75 0.10 2' x 6' 1.61
4S-SST 20 0.46 4' x 17' 1.30
30 0.55 4' x 18' 1.47
40 0.63 4' x 19' 1.60
50 0.71 5' x 19' 1.44
4S-SST-PC 30-40 0.50 4' x 18' 1.34
40-75 0.59 4' x 18' 1.58
8' Series with 5°Trajectory
Prec. Rate*
Pattern Desc. psi GPM Radius ▲▲■■
8-Q 20 0.17 7 1.55 1.34
90°30 0.24 8 1.68 1.45
40 0.26 9 1.61 1.39
50 0.29 9 1.60 1.39
8-Q-PC 30-40 0.22 8 1.54 1.33
40-75 0.25 8 1.75 1.51
8-T 20 0.23 7 1.58 1.36
120°30 0.30 8 1.57 1.36
40 0.36 9 1.67 1.45
50 0.40 9 1.66 1.44
8-T-PC 30-40 0.29 8 1.52 1.32
40-75 0.35 8 1.84 1.59
8-H 20 0.37 8 1.47 1.27
180°30 0.50 8 1.75 1.51
40 0.58 9 1.80 1.56
50 0.65 9 1.80 1.56
8-H-PC 30-40 0.44 8 1.54 1.33
40-75 0.50 8 1.75 1.51
8-TT 20 0.56 7 1.92 1.66
240°30 0.70 8 1.84 1.59
40 0.80 9 1.86 1.61
50 0.88 9 1.82 1.58
8-TT-PC 30-40 0.59 8 1.55 1.34
40-75 0.70 8 1.84 1.59
8-TQ 20 0.63 7 1.92 1.66
270°30 0.76 8 1.77 1.53
40 0.86 9 1.78 1.54
50 0.93 9 1.71 1.48
8-TQ-PC 30-40 0.64 8 1.49 1.29
40-75 0.70 8 1.63 1.41
8-F 20 0.74 7 1.69 1.46
360°30 1.00 8 1.75 1.51
40 1.16 9 1.80 1.56
50 1.30 9 1.80 1.56
8-F-PC 30-40 0.85 8 1.49 1.29
40-75 1.00 8 1.75 1.51
15' Series with 27°Trajectory
Prec. Rate*
Pattern Desc. psi GPM Radius ▲▲■■
15-Q 20 0.68 14 1.55 1.34
90°30 0.85 15 1.69 1.46
40 1.04 16 1.82 1.57
50 1.23 16 2.15 1.86
15-Q-PC 30-40 0.75 15 1.49 1.29
40-75 0.81 15 1.61 1.40
15-T 20 0.95 14 1.75 1.52
120°30 1.10 15 1.64 1.42
40 1.30 16 1.82 1.57
50 1.45 16 2.03 1.75
15-T-PC 30-40 1.00 15 1.49 1.29
40-75 1.10 15 1.64 1.42
15-H 20 1.37 13 1.79 1.55
180°30 1.65 15 1.66 1.44
40 2.02 16 1.77 1.53
50 2.14 16 1.87 1.62
15-H-PC 30-40 1.50 15 1.49 1.29
40-75 1.65 15 1.64 1.42
15-TT 20 1.78 14 1.59 1.38
240°30 2.20 15 1.64 1.42
40 2.66 16 1.74 1.51
50 2.84 16 1.86 1.61
15-TT-PC 30-40 2.00 15 1.49 1.29
40-75 2.20 15 1.64 1.42
15-TQ 20 2.10 13 1.85 1.61
270°30 2.60 15 1.72 1.49
40 3.00 16 1.86 1.61
50 3.40 16 1.98 1.72
15-TQ-PC 30-40 2.30 15 1.53 1.32
40-75 2.50 15 1.66 1.44
15-F 20 2.85 13 1.89 1.63
360°30 3.60 15 1.79 1.55
40 4.20 16 1.84 1.59
50 4.58 16 2.00 1.73
15-F-PC 30-40 3.00 15 1.49 1.29
40-75 3.30 15 1.64 1.42
570 MPR Plus Spray Nozzle Performance Chart—U.S.
Radius shown in feet.
■ = nozzles with PCDs.
*▲▲Precipitation rates are for triangular spacing, shown in inches per hour, calculated at 50% of diameter.
■■Precipitation rates are for square spacing, shown in inches per hour, calculated at 50% of diameter.
All performance specifications are based on the stated working pressure available at the base of the sprinkler head.
7
7

Recycled Water
Indicators
89-5818
•Lavender snap-on
cover for use on
570Z Series shrub
adapters
89-9752
•Lavender snap-on
cover for use on
570Z Series
pop-up models
102-0563
•Lavender molded
cover for use on
570Z Series
pop-up models
570S-E
•Lavender molded
570Z Series shrub
adapter for
recycled applications
•Installs onto a 1⁄2"
(13mm) NPT riser
Extender
570-6X
•570Z Extender
•Male-inlet threads
install onto any 570Z
pop-up sprinkler or
shrub adapter to
provide a 6" (150mm)
extension
•Maximum pressure:
75 psi (5,2 Bar)
Risers
570SR-6
•570Z Stationary Riser
•1⁄2" (13mm) male-
threaded inlet
•Maximum pressure:
75 psi (5,2 Bar)
•Height: 6" (150mm)
570SR-18
•570Z Stationary Riser
•1⁄2" (13mm) male-
threaded inlet
•Maximum pressure:
75 psi (5,2 Bar)
•Height: 18" (450mm)
Note: Specifications subject to
change without notice.
For more information, contact
your local Toro distributor.
Form No. 490-2760 LP17M1002
The Toro Company •Irrigation Division •An ISO 9000-Certified Company
•PO Box 489 •Riverside, CA •92502 •[phone] •www.toro.com
© Copyright 2002 The Toro Company •All Rights Reserved •October 2002