Toro 570Z Series User manual

CV
570Z & 570S Series Sprinklers
Installation Instructions
570Z-4P Pop-Up
570Z-6P Pop-Up
570Z-12P Pop-Up
570 Series Sprinkler Specifications
Shrub Head Body (570S)
• Inlet: 1/2" I.P.S. Thread
• Maximum Working Pressure: 75 PSI
• Recommended Operating Range: 20–50 PSI
4" & 6" Pop-Up Body (570Z)
• Inlet: 1/2" I.P.S. Thread
• Height: 4 3/4" (4"), 7 1/8" (6")
• Pop-Up: 4", 6"
• Retraction: Positive Spring Retraction
• Maximum Working Pressure: 75 PSI
• Recommended Operating Range: 20–50 PSI
• Side-Inlet Option
12" Pop-Up Body (570Z)
• Inlet: 1/2" I.P.S. Thread
• Height: 16"
• Pop-Up: 12"
• Retraction: Positive Spring Retraction
• Maximum Working Pressure: 75 PSI
• Recommended Operating Range: 20–50 PSI
• Side-Inlet Option
Nozzle Installation
Shrub
1. If loose screen, place the filter screen, closed end first, into the shrub base. If integrated
screen, drop the entire nozzle assembly into the riser.
2. Screw nozzle onto the shrub base and hand-tighten.
Pop-Up
1. With your little finger, reach down into the riser (threads) and pull up.
2. Grasp the riser above the cap firmly with your thumb and forefinger. Avoid using pliers
which may damage the riser.
3. If loose screen, place the filter screen, closed end first, into the riser. If integrated screen,
drop the entire nozzle assembly into the riser.
4. Screw the nozzle into the riser and hand-tighten.
5. Release the riser slowly to the fully retracted position.
6. If replacing the complete riser assembly (stem, spring and cap), align the keyways in the
riser with the body and screw on the cap. Do not over tighten the cap on the body as re-
moval will be necessary to properly align spray patterns and flush the system.
570S Shrub Head

Sprinkler Installation
Caution: Use only PTFE tape to make threaded connections from riser or barbed ell to sprinkler body. Deterioration of plastic
may occur if other sealing compounds are used.
Note: It is recommended that shrub and pop-up sprinklers be installed on polyethylene risers or barbed ell and thick walled poly
pipe. The 12" high pop should be installed on a barbed ell and thick walled poly pipe to reduce trenching depth.
Shrub Sprinkler
1. Screw assembled shrub sprinkler securely onto PTFE taped riser and position the spray pattern indicator on nozzle with the in-
tended coverage area for part circle models.
Pop-Up Sprinkler
1. Grasp the sprinkler by the body (not cap) and screw securely onto
the PTFE taped riser or barbed ell. Do not over tighten, hand-tight is
sufficient.
Note: The 570 Series pop-up sprinkler should be installed so that
the top of the cap is level with the final finished grade (soil).
2. After all pop-up sprinkler heads have been installed, remove the cap
and riser from each body. For shrubs, remove nozzle and filter screen.
3. Flush the system with water until all dirt and debris has been removed.
4. Reinstall all shrub nozzles, filter screens, riser and cap assemblies,
positioning riser keyway of part circle models to properly align spray
pattern with intended coverage area. For adjustable arc nozzles, turn
the arc adjustment to the intended coverage area.
5. Backfill the soil around the heads carefully, avoiding soil contact with
the top of the cap.
6. Turn on the water source to the system.
7. Adjust the spray radius as necessary. This is accomplished by turning
the slotted screw located on the top center of all nozzles.
A. To decrease radius (3' minimum), turn the adjustment screw clock-
wise. Precipitation rate and GPM will be reduced as well, depend-
ing upon working pressure of the system.
B. To increase the radius (15' maximum), turn the adjustment screw
counterclockwise.
Shrub Installation
Tee Installation
Swing Pipe Installation
Spray Pattern (Half Circle Shown)
Radius Adjustment Screw
Radius Indicator
Spray Pattern Indicator
Q - Quarter Circle
H - Half Circle
F - Full Circle

570 Nozzle Series
• Maximum Pressure: 75 PSI
• Recommended Operating Range: 20–50 PSI
15' SERIES WITH 27°TRAJECTORY
Part No. Model No. Description Screen(s)
89-1769 15-Q1/4 CircleWhite
89-1768 15-T1/3 CircleWhite
89-1767 15-H1/2 CircleWhite
89-1766 15-TT 2/3 Circle White
89-1765 15-TQ 3/4 CircleWhite
89-1764 15-FFull-circleWhite
12' SERIES WITH 23°TRAJECTORY
Part No. Model No. Description Screen(s)
89-1775 12-Q1/4 CircleWhite
89-1774 12-T1/3 CircleWhite
89-1773 12-H1/2 CircleWhite
89-1772 12-TT 2/3 Circle White
89-1771 12-TQ 3/4 CircleWhite
89-1770 12-FFull-circleWhite
10' SERIES WITH 12°TRAJECTORY
Part No. Model No. Description Screen(s)
89-1781 10-Q1/4 CircleWhite
89-1780 10-T1/3 CircleWhite
89-1779 10-H1/2 CircleWhite
89-1778 10-TT 2/3 Circle White
89-1777 10-TQ 3/4 CircleWhite
89-1776 10-FFull-circleWhite
8' SERIES WITH 5° TRAJECTORY
Part No. Model No. Description Screen(s)
89-17878-Q 1/4 Circle Red
89-17868-T 1/3 Circle Red
89-17858-H 1/2 Circle Red
89-17848-TT2/3 CircleRed
89-17838-TQ3/4 CircleRed
89-17828-F Full-circle Red
5' SERIES WITH 0° TRAJECTORY
Part No. Model No. Description Screen(s)
89-17935-Q 1/4 Circle Red & Metal
89-17925-T 1/3 Circle Red & Metal
89-17915-H 1/2 Circle Red & Metal
89-17905-TT2/3 CircleRed & Metal
89-17895-TQ3/4 CircleRed & Metal
89-17885-F Full-circle Red & Metal
SPECIAL PATTERNS
Part No. Model No. Description Screen(s)
89-1796 4x30-SST Side Strip, 4' x 30'Red
89-1795 4x30-EST End Strip, 4' x15' White
89-1794 4x30-CST Center Strip, 4' x 30'White
89-1797 9x18-SST Side Strip, 9' x 18'White
89-1798 4x18-SST Side Strip, 4' x 18'Red
89-1799 2x6-SST Side Strip, 2' x 6' Red & Metal
570 MPR Nozzles – Standard 570 MPR Plus Nozzles – Press. Comp.
15' SERIES WITH 27°TRAJECTORY
Part No. Model No. DescriptionScreen(s)
89-1416 15-Q-PC 1/4 Circle White
89-1413 15-T-PC 1/3 Circle White
89-1410 15-H-PC 1/2 Circle White
89-1407 15-TT-PC2/3 CircleWhite
89-1404 15-TQ-PC 3/4 CircleWhite
89-1401 15-F-PC Full-circleWhite
12' SERIES WITH 23° TRAJECTORY
Part No. Model No. Description Screen(s)
89-1434 12-Q-PC 1/4 Circle White
89-1431 12-T-PC 1/3 Circle White
89-1428 12-H-PC 1/2 Circle White
89-1425 12-TT-PC2/3 Circle White
89-1422 12-TQ-PC 3/4 Circle White
89-1419 12-F-PC Full-circleWhite
10' SERIES WITH 12°TRAJECTORY
Part No. Model No. Description Screen(s)
89-1452 10-Q-PC 1/4 Circle White
89-1449 10-T-PC 1/3 Circle White
89-1446 10-H-PC 1/2 CircleWhite
89-1443 10-TT-PC2/3 CircleWhite
89-1440 10-TQ-PC 3/4 CircleWhite
89-1437 10-F-PC Full-circleWhite
8' SERIES WITH 5° TRAJECTORY
Part No. Model No. Description Screen(s)
89-14708-Q-PC1/4 Circle Red
89-1467 8-T-PC 1/3 Circle Red
89-14648-H-PC1/2 CircleRed
89-14618-TT-PC 2/3 CircleRed
89-14588-TQ-PC 3/4 CircleRed
89-14558-F-PC Full-circle Red
5' SERIES WITH 0° TRAJECTORY
Part No. Model No. Description Screen(s)
89-14885-Q-PC1/4 Circle Red & Metal
89-14855-T-PC 1/3 Circle Red & Metal
89-14825-H-PC1/2 CircleRed & Metal
89-14795-TT-PC 2/3 CircleRed & Metal
89-14765-TQ-PC 3/4 CircleRed & Metal
89-14735-F-PC Full-circle Red & Metal
SPECIALPATTERNS
Part No. Model No. Description Screen(s)
89-1503 4x30-SST-PC Side Strip, 4' x 30'Red
89-1500 4x30-EST-PC End Strip, 4' x 15' White
89-1497 4x30-CST-PC Center Strip, 4' x 30'White
89-1506 9x18-SST-PC Side Strip, 9' x 18'White
89-1509 4x18-SST-PC Side Strip, 4' x 18'Red
89-1512 2x6-SST-PCSide Strip, 2' x 6' Red & Metal

© 2019 The Toro Company • www.toro.com Part Number 373-1029 Revision A
WARNING: Cancer and Reproductive harm – www.P65Warnings.ca.gov
For more information, please visit www.toro.com/CAProp65.
Patent: www.ttcopats.com
PRESSURE COMPENSATING DEVICES
Model No. DescriptionModel No.Description
PCD-.25.25 GPM PCD-1.41.4 GPM
PCD-.50.50 GPM PCD-2.02.0 GPM
PCD-.70.70 GPM PCD-3.03.0 GPM
PCD-1.01.0 GPM
STREAM BUBBLER NOZZLES
Part No. Model No. DescriptionScreen(s)
89-1806 SB-90 1/4 Circle White
89-1807 SB-180 1/2 Circle White
89-1808 SB-360 Full-circle White
89-1809 SB-2-180 1/2 Circle, 2 Stream White
89-1810 SB-4-180 1/2 Circle, 4 Stream White
FLAT SPRAY–PRESSURE COMPENSATING
Part No. Model No. Description Screen(s)
35-7704FSQ-PC Flat Spray, 90°White
35-7700FSH-PC Flat Spray, 180°White
35-7698FSF-PC Flat Spray, 360° White
35-7712FSQ-LG-PC Flat Spray, 90°Low GPMRed & Metal
35-7708FSH-LG-PC Flat Spray, 180° Low GPM Red & Metal
35-7706FSF-LG-PC Flat Spray, 360°Low GPMRed & Metal
35° STREAM SPRAY–STANDARD
Part No. Model No. Description Screen(s)
89-1800 35-SSF Stream Spray, 360° Red & Metal
89-1801 35-SSH Stream Spray, 180° Red & Metal
89-1802 35-SSQ Stream Spray, 90° Red & Metal
35° STREAM SPRAY – PRESSURE COMPENSATING
Part No. Model No. Description Screen(s)
89-1491 35-SSF-PC Stream Spray, 360° Red & Metal
89-1493 35-SSH-PC Stream Spray, 180°Red & Metal
89-1495 35-SSQ-PC Stream Spray, 90°Red & Metal
10° STREAM SPRAY–STANDARD
Part No. Model No. Description Screen(s)
89-1803 10-SSF Stream Spray, 360° Red & Metal
89-1804 10-SSH Stream Spray, 180° Red & Metal
89-1805 10-SSQ Stream Spray, 90° Red & Metal
10° STREAM SPRAY – PRESSURE COMPENSATING
Part No. Model No. Description Screen(s)
89-1519 10-SSF-PC Stream Spray, 360° Red & Metal
89-1521 10-SSH-PC Stream Spray, 180°Red & Metal
89-1547 10-SSQ-PC Stream Spray, 90°Red & Metal
FLOOD BUBBLER – PRESSURE COMPENSATING
Part No. Model No.Description Screen(s)
89-1727FB-25-PC Flood Bubbler, Red&Metal
.25 GPM
89-1729FB-50-PC Flood Bubbler, Red&Metal
.50 GPM
89-1731FB-100-PC Flood Bubbler, Red&Metal
1.00 GPM
89-1733FB-200-ADJ-PC
570 Flat Spray – Pressure Compensating
570 Stream Spray – Standard
570 Stream Bubblers – Standard
570 Stream Bubblers – Pressure Comp.
570 Stream Spray – Pressure Comp.
570 Flood Bubbler – Pressure Comp.
TORO ADJUSTABLE ARC NOZZLES
Model No. Description
TVAN-8 8' Variable Arc Pattern (Includes Screen)
TVAN-10 10' Variable Arc Pattern (Includes Screen)
TVAN-12 12' Variable Arc Pattern (Includes Screen)
TVAN-15 15' Variable Arc Pattern (Includes Screen)
TVAN-17 18' Variable Arc Pattern (Includes Screen)
FLAT SPRAY–STANDARD
Part No. Model No.Description Screen(s)
35-2748FSQ Flat Spray, 90°White
35-2747FSH Flat Spray, 180°White
35-2746FSF Flat Spray, 360°White
35-4245FSQ-LGFlat Spray, 90°Low GPMRed & Metal
35-4246FSH-LGFlat Spray, 180° Low GPMRed & Metal
35-4247FSF-LGFlat Spray, 360° Low GPMRed & Metal
570 Flat Spray – Standard
Variable Arc Nozzles (TVANs)
570 Pressure Compensating Devices
STREAM BUBBLER NOZZLES
Part No. Model No.Description Screen(s)
89-7865 SB-90-PC21/4 Circl
eW
hite
89-7875 SB-180-PC21/2 Circl
eW
hite
89-7877 SB-360-PC2Full-circle White
89-7871 SB-2-180-PC21/2 Circle, 2 Stream White
89-7873 SB-4-180-PC21/2 Circle, 4 Stream White