Torque Fitness MJ-CP User manual

MJ-CP CHEST PRESS
MJ-CP CHEST PRESS
MJ-CP CABLE TECHNOLOGY CHEST PRESS

EXPLODED DIAGRAM

PARTS LIST - STEP 1
ITEM PART NUMBER DESCRIPTION QTY
1 DABE03831416NU Cap Head Screw 3/8”x 3 1/4” L 2
2 DABE03843416NU Cap Head Screw 3/8”x 4 3/4”” L 4
3 DB2E03811000U Lock Nut 3/8”x 11t 6
4 DC120010510U 3/8” Flat Washer 8
5 DC322010015U 3/8” Curved Washer 4
6 A05-0212 Alum. Collar w/ Set Screw 2
7 P00875 Tower Assembly 1
8 P01-5184 Guide Rod 2
9 P02-6927 Spacer Plate (used when without Shroud) 1
10 P04-3849 Single Pulley Bracket 1
11 P04-4404 Top Pulley Bracket 1
12 P05-0036 Nut 1/2” x 7.8t 1
13 P06-0034 Weight Stack Cushion 2
14 P10-0048 WEIGHT PLATE, 15 lb 5
15 P10-0779 WEIGHT PLATE, 20 lb 3
16 P10-0862 WEIGHT PLATE, 10 lb 6
17 P11-0210 Selector Pin 1
18 P20-5017 Bottom Tube Assy 1
19 P20-5018 Top Plate w/ Selector Stem Assy 1
Position Bottom Tube Assembly (18) in place prior to installing weight stack.
After weight stack is assembled, raise guide rods and hold in elevated position with bolts used in Bottom Tube Assembly.
Raise Collars (6) to the top of the guide rods and secure in place using Allen wrench.
Clean surface of weight stack and install weight stack labels.

6
5
15
10
12
19
16
8
3
17
14
13
2
18
4
3
7
2
1
11
4
9
ASSEMBLY - STEP 1
Note: If optional shrouds are
to be assembled, replace item
9 with upper shroud bracket
found in shroud box.

PARTS LIST - STEP 2
ITEM PART NUMBER DESCRIPTION QTY
1 DABE03821416YU Cap Head Screw 3/8”x 2 1/4” L with blue patch 2
2 DABE03823416ANU Cap Head Screw 3/8”x 2 3/4” L 2
3 DABE03830016ANU Cap Head Screw 3/8”x 3” L 2
4 DABE03861416NU Cap Head Screw 3/8”x 6 1/4” L 4
5 DB2E03811000U Lock Nut 3/8”x 11t 8
6 DC120010510U 3/8” Flat Washer 6
7 DC322010015U 3/8” Curved Washer 12
8 MJ-T MJ Tower Assembly 1
9 P04-4389 Connect Tube 1
10 P04-4395 Upright Tube 1
11 P04-4396 Arm Assy 1
12 P20-5015 Swivel Pulley Assy 2

8
5
7
12
9
3
10
5
611
2
4
1
w/ NP
ASSEMBLY - STEP 2
Use C-Clip Pliers to open and
secure C-Clip in the groove of
Swivel Pulley Shafts.

PARTS LIST - STEP 3
ITEM PART NUMBER DESCRIPTION QTY
1 DB2E03811000U Lock Nut 3/8”x 11t 14
2 DABC03804816NU Cap Head Screw 3/8”x 48mm L 14
3 DC120010510U 3/8” Flat Washer 28
4 DABM05008006YB Socket Cap Screw M5 x 6mmL with blue patch 4
5 MJ-T MJ Tower 1
6 P05-1377 Core, Cable Coupler 2
7 P06-0035 4 1/2” Pulley 11
8 P06-0051 3 1/2” Pulley 1
9 P06-3474 Housing, Cable Coupler 2
10 P06-3475 Grommet, Rubber Cable 2
11 P12-0256 Handle Strap 2
12 P13-0497 Cable 1
13 DI1080080U Snap Hook 2

11600.0
P13-0497
5
4
6
10
13
11
12
9
2
2
7
7
7
2
3
7
2
7
8
2
3
1
2
ASSEMBLY - STEP 3
11600.0
P13-0497
5
4
6
10
13
11
12
9
2
2
7
7
7
2
3
7
2
7
8
2
3
1
2
w/ NP

PARTS LIST - STEP 4
ITEM PART NUMBER DESCRIPTION QTY
1 DABE03811416YBU Cap Head Screw 3/8”x 1 1/4” L with blue patch 2
2 DABE03830016YBU Cap Head Screw 3/8”x 3” L with blue patch 2
3 DC120010510U 3/8” Flat Washer 4
4 MJ-T MJ Tower 1
5 P07-0434 Seat Pad 1
6 P07-0688 Back Pad 1
Upon completion, follow placard instructions to attach placard label to tower.

6
5
3
1
2
4
w/ NP
w/ NP
ASSEMBLY - STEP 4