Toshiba teli CleverDragon Series User manual

Rev 3.0
D4161841C
High-Resolution CCD Color Camera
CleverDragon Series
CSCU30CC18(-01)
Instruction Manual
Thank you for purchasing our product.
Before using this CCD color camera, please read through this instruction manual
carefully in order to use this product correctly and safely.
After reading, keep this instruction manual handy so that you can refer to,
whenever you need it.
Contents
Safety Precautions
1. Overview······························································································1
2. Features································································································1
3. Configuration ·······················································································1
4. Optional parts·······················································································2
5. Name of Each Parts···············································································2
6. Installing the camera·············································································3
7. Connection ···························································································4
8. DIP switch setting·················································································5
9. Functions······························································································6
10. Before determining it as being a fault·················································21
11. Specifications·····················································································22
12. Guarantee··························································································29
13. Repair································································································29
13. Outline Drawing················································································30

Rev 3.0
D4161841C
Safety Precautions
Before using this product, read these safety precautions carefully. Important information is shown in this
Instruction Manual to protect users from bodily injuries and property damages, and to enable them to use the
product safely and correctly.
Please be sure to thoroughly understand the meanings of the following signs and symbols before reading the main
text that follow, and observe the instructions given herein.
[Definition of Safety Signs]
Notes *1: “Serious injury” refers to cases of loss of eyesight, wounds, burns (high or low temperature),
electric shock, broken bones, poisoning, etc., which leave after-effects or which require
hospitalization or a long period of outpatient treatment of cure.
*2: "Light to moderate injuries" refers to injuries, burns, electric shock etc. that do not require
hospitalization or long-term treatment.
*3: "Property damage" refers to cases of extensive damage involving damage to buildings,
equipment, farm animals, pet animals and other belongings.
[Explanation of Safety Symbols]
Safety Signs Description
WARNING Indicates a potentially hazardous situation that may result in death or
serious injury (*1) in the event of improper handling.
CAUTION Indicates a potentially hazardous situation that may result in light to
moderate injuries (*2) or only in property damage (*3)in the event of
improper handling.
Safety Symbols Description
PROHIBITED
This sign indicates PROHIBITION (Do not).
The content of prohibition is shown by a picture or words beside the
symbol.
MANDATORY
This sign indicates MANDATORYACTION (You are required to do).
The content of action is shown by a picture or words beside the symbol.

Rev 3.0
D4161841C
[General Handing]
WARNING
unplug
 Immediately cease use of the equipment in the event of abnormality or malfunction.
If abnormal conditions are present, such as smoke, a burning smell, ingress of water or foreign
matter, or if the equipment is dropped or malfunctions, fire or electric shock may result.
If such abnormalities occur, disconnect the power plug from the outlet and contact your sales
representative.
Do not get wet
 Do not use the equipment in locations subject to water splashes.
Otherwise, fire or electric shock may result.
Never pull apart
 Do not disassemble, repair, or modify the equipment.
Otherwise, fire or electric shock may result.
For internal repair, inspection, or cleaning, contact your sales representative.
Avoid
 Do not place anything on the equipment.
If metallic objects, liquid, or other foreign matter enters the equipment, fire or electric shock may
result.
Avoid
 Do not install the equipment in an unstable or inclined location or locations subject to
vibration or impact.
Otherwise, the equipment may topple over and cause personal injury.
Do not touch
 During an electrical storm, do not touch the power cord or connection cable.
Otherwise, an electric shock may result.
Instruction
 Use the specified voltage.
Use of an unspecified voltage may result in fire or electric shock.
Avoid
 Do not be handled roughly, damaged, fabricated, bent forcefully, pulled, twisted, bundled,
placed under heavy objects or heated the power cord , connection cable.
Otherwise, fire or electric shock may result.

Rev 3.0
D4161841C
[General Handing]
CAUTION
Instruction
 Observe the following when installing the equipment:
· Do not cover the equipment with a cloth, etc.
· Do not place the equipment in a narrow location where heat is likely to accumulate.
Otherwise, heat will accumulate inside the equipment, possibly resulting in a fire.
Avoid
 Do not place the equipment in locations subject to high moisture, oil fumes, steam, or dust.
Otherwise, fire or electric shock may result.
Avoid
 Do not install the equipment in locations exposed to direct sunlight or humidity.
Otherwise, the internal temperature of the equipment will rise, which may cause a fire.
Instruction
 Use only specified DC power cables and connection cables.
Otherwise, fire or electric shock may result.
Instruction
 When performing connection, turn off power.
When connecting the power cable or connection cable, turn off the equipment power.
Otherwise, fire or electric shock may result.
Instruction
 Contact your sales representative to request periodic inspection and cleaning (every
approx. five years).
Accumulation of dust inside the equipment may result in fire or electric shock.
For inspection and cleaning costs, contact your sales representative.

Rev 3.0
D4161841C
CASES FOR INDEMNITY (LIMITED WARRANTY)
We shall be exempted from taking responsibility and held harmless for damage or losses incurred by the user in
the following cases.
 In the case damage or losses are causedby fire, earthquake, or other acts ofGod, acts bya third party, deliberate
or accidental misuse by the user, or use under extreme operating conditions.
 In the case of indirect, additional, consequential damages (loss of business interests, suspension of business
activities) are incurred as result of malfunction or non-function of the equipment, we shall be exempted from
responsibility for such damages.
 In the case damage or losses are caused by failure to observe the information contained in the instructions in
this instruction manual and specifications.
 In the case damage or losses are caused by use contrary to the instructions in this instruction manual and
specifications.
 In the case damage or losses are caused by malfunction or other problems resulting from use of equipment or
software that is not specified.
 In the case damage or losses are caused by repair or modification conducted by the customer or any
unauthorized third party (such as an unauthorized service representative).
 Expenses we bear on this product shall be limited to the individual price of the product.
RESTRICTION FOR USE
 Should the equipment be used in the following conditions or environments, give consideration to safety
measures and inform us of such usage:
1. Use of the equipment in the conditions or environment contrary to those specified, or use outdoors.
2. Use of the equipment in applications expected to cause potential hazard to people or property, which
require special safety measures to be adopted.
 This product can be used under diverse operating conditions. Determination of applicability of equipment or
devices concerned shall be determined after analysis or testing as necessary by the designer of such equipment
or devices, or personnel related to the specifications. Such designer or personnel shall assure the performance
and safety of the equipment or devices.
 This product is not designed or manufactured to be used for control of equipment directly concerned with
human life (*1) or equipment relating to maintenance of public services/functions involving factors of
safety (*2). Therefore, the product shall not be used for such applications.
(*1): Equipment directly concerned with human life refers to.
· Medical equipment such as life-support systems, equipment for operating theaters.
· Exhaust control equipment for exhaust gases such as toxic fumes or smoke.
· Equipment mandatory to be installed by various laws and regulations such as the Fire Act or
Building Standard Law
· Equipment related to the above
(*2) :Equipment relating to maintenance of public services/functions involving factors of safety refers to.
· Traffic control systems for air transportation, railways, roads, or marine transportation
· Equipment for nuclear power generation
· Equipment related to the above

Rev 3.0
D4161841C
Notes on using this product
 Handle carefully
Do not drop the equipment or allow it to be subject to strong impact or vibration, as such action may cause
malfunctions. Further, do not damage the connection cable, since this may cause wire breakage.
 Environmental operating conditions
Do not use the product in locations where the ambient temperature or humidity exceeds the specifications.
Otherwise, image quality may be degraded or internal components may be adversely affected. In particular, do
not use the product in areas exposed to direct sunlight. Moreover, during shooting under high temperatures,
vertical stripes or white spots (noise) maybe produced, depending on the subject or camera conditions (such as
increased gain). However, such phenomena are not malfunctions.
 Check a combination with the lens
Depending on the lens and lighting you use, an image is reflected as a ghost in the imaging area. However, this
is not because of a fault of the camera.
In addition, depending on the lens you use, the performance of the camera may not be brought out fully due to
deterioration in resolution and brightness in the peripheral area, aberration and others.
Be sure to check a combination with the camera by using the lens and lightning you actually use.
When installing a lens in the camera, make sure carefully that it is not tilted.
In addition, use a mounting screw free from defects and dirt. Otherwise, the camera may be unable to be
removed.
 Do not shoot under intense light.
Avoid intense light such as spot lights on part of the screen because it may cause blooming or smears. If intense
light falls on the screen, vertical stripes may appear on the screen, but this is not a malfunction.
 Occurrence of moiré
If you shoot thin stripe patterns, moiré patterns (interference fringes) may appear. This is not a malfunction.
 Occurrence of noise on the screen
If an intense magnetic or electromagnetic field is generated near the camera or connection cable, noise may be
generated on the screen. If this occurs, move the camera or the cable.
 Handling of the protective cap
If the camera is not in use, attach the lens cap to the camera to protect the image pickup surface.
 If the equipment is not to be used for a long duration
Turn off power to the camera for safety.
 Maintenance
Turn off power to the equipment and wipe it with a dry cloth.
If it becomes severely contaminated, gently wipe the affected areas with a soft cloth dampened with diluted
neutral detergent. Never use alcohol, benzene, thinner, or other chemicals because such chemicals may damage
or discolor the paint and indications.
If the image pickup surface becomes dusty, contaminated, or scratched, consult your sales representative.

Rev 3.0
D4161841C
 Disposal
When disposing of the camera, it may be necessary to disassemble it into separate parts, in accordance with the
laws and regulations of your country and/or municipality concerning environmental contamination.
Following information is only for EU-member states:
The use of the symbol indicates that this product may not be treated as household waste.
By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. For more detailed information
about the take-back and recycling of this product, please contact your supplier where
you purchased the product.
This equipment complies with Part15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This equipment may not cause harmful interference, and (2) This equipment must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a classA digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be require to correct the interference at his own expense.

Rev 3.0
D4161841C
环保使用期限标识，是根据电子信息产品污染控制管理办法以及，电子信息产
品污染控制标识要求( J/T11364-2006)、电子信息产品环保使用期限通则，制
定的适用于中国境内销售的电子信息产品的标识。
电子信息产品只要按照安全及使用说明内容，正常使用情况下，从生产 月 期算
起，在此期限内，产品中含有的有毒有害物质不致发生外泄或突变，不致对环
境造成严重污染或对其人身、财产造成严重损害。
产品正常使用后，要废弃在环保使用年限内或者刚到年限的产品时，请根据国
家标准采取适当的方法进行处置。
另外，此期限不同于质量/功能的保证期限。
The Mark and Information are applicable for People's Republic of China only.
＜产品中有毒有害物质或元素的名称及含量＞
有毒有害物质或元素
部件名称
铅（Pb） 汞（Hg） 镉（Cd） 六价铬
（Cr(VI)）
多溴联苯
（PBB）
多溴二苯醚
(PBDE）
相机本体 × ○ ○ ○ ○ ○
○：表示该有毒有害物质在该部件所有均质材料中的含量均在电子信息产品中有毒有害物质的限量
要求标准规定的限量要求( J/T11363-2006)以下
×：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出电子信息产品中有毒有害物质
的限量要求标准规定的限量要求( J/T11363-2006)
This information is applicable for People's Republic of China only.
リサイクルに関する情報（包装物）
有关再利用的信息(包装物)
Information on recycling of wrapping composition
段ボール
瓦楞纸板
Corrugated cardboard
CB
箱／ 箱子 ／ Box
04
内部緩衝材料・袋
内部缓冲材料·袋
Internal buffer materials
・
Bag
LDPE
中华人民共和国
环保使用期限
10

Rev 3.0
D4161841C
1
1. Overview
This CCD color camera is a high-resolution color camera that features all pixel readout mode 1/1.8 CCD.
Model Power Supply Interface
CSCU30CC18 Camera Link Connector
PoCL
(Power over Camera Link)
CSCU30CC18-01 I/O Connector non-PoCL
(Camera Link)
2. Features
(1) High resolution
Bayer array high pixel density CCD (number of effective pixels 2.01 M, number of total pixels 2.11 M) is used.
(2) Square grids
The CCD pixels arrayed in square grids facilitates computation for image processing.
(3) Full-frame shutter
Since all pixels are output even by shutter operation, high resolution can be achieved, without deteriorating the
vertical resolution.
(4) Camera link interface (power supply type) PoCL
The interface for image output and camera control complies with the camera link standard.
By using a camera link frame grabber board for camera link of possible power supplies, the shot image can be
transferred to PC at high speed, various camera controls can be performed from PC, and the power supply of the
camera can be supplied with one cable. The camera link model that is not the power supply type is
CSCU30BC18-01.
(5) All-pixel readout mode (normal mode)
All pixel signals (in the effective area) are output in approximately 1/30 second.
(6) Programmable partial scan mode
Partial scan within the range arbitrary from 50 lines to 1236 lines is possible.
(7) High-speed draft readout mode
By reading 2 lines from every 8 lines, all signals in the effective area are output in approximately in 1/89 second.
(8) Random trigger shutter
By external trigger signal input, the shot image can be grabbed at an arbitrary timing.
(9) Multiple-shutter
By external trigger signal input, the shot image can be grabbed at an arbitrary timing and the accumulated shot
images can be output at an arbitrary timing.
3. Configuration
(1) Camera body·················································································1
(2) Accessories
Instruction Manual (Japanese)····················································1
Instruction Manual (English)······················································1

Rev 3.0
D4161841C
2
4. Optional parts
(1) Power cable Model name: CPRC3700-**
(2) Camera Link cable For the cable for PoCL, please contact the cable manufacturer.
(3) Camera mounting kit Model name: CPT4000CL
(4) Camera adapter Model name: CA130C
*NOTE: Application software is not supplied as a standard item.
Notes on optional parts and compliance with safety standard conditions:
We assure the compliance of this camera with the safety standard when it is used in combination with the
optional parts listed above.
If you use the camera in combination with parts other than specified by our company, you are responsible
for finally confirming the compliance with the safety standard by using the entire machine/equipment.
5. Name of Each Parts
(1)
(2)(3)
I/O
(1) Video output/controlling connector (Camera Link Base Configuration) CAMERA LINK
Outputs video signals and VALID, based on the camera link standard LVDS.
This connector is connected to the frame grabber board, image processing device and others.
・ Connector model: DR 26-PIN connector 10226-2210PE (manufactured by 3M).
Pin No. I/O Signal Name Pin No. I/O Signal Name
1 I(-) +12V (GND) 14 - GND
2 O Tx OUT0- 15 O Tx OUT0+
3 O Tx OUT1- 16 O Tx OUT1+
4 O Tx OUT2- 17 O Tx OUT2+
5 O Tx CLK OUT- 18 O Tx CLK OUT+
6 O Tx OUT3- 19 O Tx OUT3+
7 I Ser TC
（ RxD ） + 20 I Ser TC （ RxD ） -
8 O Ser TFG
（ TxD ） - 21 O Ser TFG （ TxD ） +
9 I CC1
（ TRIG ） - 22 I CC1 （ TRIG ） +
10 I CC2
（ MULTI ） + 23 I CC2 （ MULTI ） -
11 I CC3- 24 I CC3+
12 I CC4+ 25 I CC4-
13 - GND 26 I(-) +12V (GND)
Please 1PIN and 26PIN must become power supplies, and match the camera link cable and grabber board for
PoCL and use it. Please note that they become GND in camera link model.
PoCL
CSCU30CC18 (PoCL):
There is "PoCL" display.
CSCU30CC18-01 (Non-PoCL):
There is NOT "PoCL" display.

Rev 3.0
D4161841C
3
(2) DIP switches
Used for various setting. For more information how to set the dip switches, see Chapter 8 "Dip Switch Setting"
(on page 5).
(3) Connector for power supply and sync signal input/output I/O
This is a terminal used for power supply to the camera. This connector is connected to the power supply unit.
In addition, this connector is used for sync signal (WEN signal) output and external trigger signal input.
・ Connector (Camera side) : HR10A-10R-12PB (Manufactured by HIROSE DENKI)
・ Plug (Cable side) : HR10A-10P-12S (Manufactured by HIROSE DENKI) or equivalents
Pin No. I/O Signal Name
1 - GND
2 -(I) N.C.(+12V)
3 - GND
4 - N.C.
5 - GND
6 - N.C.
7 - N.C.
8 - GND
9 - N.C.
10 O WEN
11 - TRIG
12 - GND
Because the power supply is done from the camera link cable, 2PIN is opened. Please note that they
become +12v in camera link model.
6. Installing the camera
(1) When you fix the camera with a tripod stand screw (1/4-20UNC), use an optional mounting tab.
(2) When you fix the camera by using the mounting screw hole on the camera body, use an M3 screw (6 mm or less for the
portion to be inserted into the inside of the camera body).
１
１１
１
２
２２
２
３
３３
３
４
４４
４５
５５
５６
６６
６
７
７７
７
８
８８
８
９
９９
９
10
1010
10
11
1111
11 12
1212
12
Rearview

Rev 3.0
D4161841C
4
7. Connection
Connect this camera as shown in the figure below.
(The figure below shows an example of connection. For details, contact our sales representative.)
CCD CAMERA
CCD CAMERACCD CAMERA
CCD CAMERA
CSCU30CC18
CSCU30CC18CSCU30CC18
CSCU30CC18
Camera link cable for PoCL
grabber board for
camera link (PoCL)
PC
AC100V
50/60Hz
camera adapter
CA1 0C I/O cable
CPRC 700-**
Because 12V of camera
side I/O connector of the
PoCL model is OPEN,
CA1 0C will use only the
synchronous I/O terminal.
Notes on frame grabber board:
How to connect a frame grabber board with PC and how to set the frame grabber board differ
depending on the frame grabber board you use.
For details, refer to the instruction manual of the relevant frame grabber board.

Rev 3.0
D4161841C
5
8. DIP switch setting
By using the DIP switches on the back surface of the camera body, you can set serial transmission speed and
memory readout for when the power supply is turned on.
If you change the switch setting after the power supply is turned on, the change is not reflected.
O
N
1
2
3
4
5
6
7
8
9
10
Transmission speed setting
Memory readout setting
Not used
Firm update
(1) Transmission speed setting
You can set the speed of serial transmission by camera link.
SW2 SW3 Transmission speed
OFF OFF 9600 bps
ON OFF 19200 bps
OFF ON 38400 bps
(2) Memory readout setting
You can set the number of the setting value saving memory bank to be called when the power supply is turned on.
The memory consists of 4 banks.
SW4 SW5 Memory number
OFF OFF 0
ON OFF 1
OFF ON 2
ON ON 3
(3) Firm update
It is a changeover switch for the CPU firm in the camera update. Please use it by turning off usually.

Rev 3.0
D4161841C
6
9. Functions
By accessing the camera register published on the camera link I/F, you can control/set each function.
Since access to the camera register is performed via the frame grabber board, the controlling and setting methods
differ depending on the frame grabber board you use. For details, refer to the instruction manual of the relevant
frame grabber board or contact our sales representative.
This instruction manual describes the specifications in the case where the camera register is directly connected by
serial transmission over the camera link interface.
9.1 Explanation of Each Function
(1) Register setting value updating Address：0x6E, Bit：0, Value:1
The changed register setting value is reflected on the camera operation.
Only writing a value in each register does not cause the value to be reflected on the camera operation.
Register value updating must be executed before the changed setting value can be reflected on the camera
action.
To save the setting value in memory, the register setting value must be updated beforehand. Otherwise, an
execution error occurs and the setting value is unable to be saved in memory.
(2) Readout mode
Video is output from the camera link connector. The output video can be grabbed by the frame grabber board.
The frame rate and resolution of output images that this model supports are as follows:
1) All pixel readout : Approximately 30 fps / 1628(H) x 1236(V)
2) Partial scan : Approximately 30 to 183 fps / 1628(H) x 552(V) to 1236(V)
3) High-speed draft readout : Approximately 89 fps / 1628(H) x 309(V)
1) All pixel readout
Address：0x70, Bit：0, Value:0 and Address：0x81, Bit：0, Value:0
Reads out all pixels in about 1/30 second.
FVAL
DATA OUT
LVAL
DVAL
1 2 3 4 5 6 7 8 1236 1235 1234
1250H

Rev 3.0
D4161841C
7
2) Programmable partial scan Address：0x70, Bit：0, Value:0 and Address：0x81, Bit：0, Value:1
Arange arbitraryfrom 50 lines to 1236 lines can beread.The frame rate canbe raised to 183fpsor less by
skipping it at high speed excluding an effective area.
When the frame rate of a partial scanning exceeds it when the shutter mode is switched from normality
(internal synchronization) to the partial scanning mode, more high-speed than the setting of the speed of
the shutter it is changed at the speed of the shutter matched to the frame rate.
･ Starting position of effective line Address：0x84, Bit：0 to 7, and Address:0x85, Bit:0 to 2, Value:0 to 1186
Starting position (Partial V Start) of an effective line can be set.
･ Number of effective lines Address：0x88, Bit：0 to 7, and Address:0x89, Bit:0 to 2, Value:50 to 1236
Number (Partial Height) of effective lines can be set.
The frame rate is obtained in the following calculations.
( )
1920
1072
1
813___1236
_2
815__
3
6
1×
×









−
++−
+



+






+






+
+=
−
HeightPartialStartVPartial
HeightPartial
StartVPartial
FrameRate
However, it assumes below the decimal point to be a round-down in {}.
Example:530 effective lines (60fps) and start 353 line eyes(center partial)
Register setting: Partial Height = 530, Partial V Start = 352
FVAL
DATA OUT
LVAL
DVAL
353 355 356 357 358 359 882 881 880
625H
354
Effective lines ： 530 line
High-speed transfer ： 44 line
High-speed transfer ： 44 line
＋
Normal-speed transfer ： 3 line
Effective lines ： 530 line
Skipped lines ： 354 line
Skipped lines ： 352 line
< Example of calculating frame rate for the above-mentioned >
( )
{ } { } [ ]
[ ]
fps
FrameRate
60
1920624 1072 192044530473 1072
1920875.44530875.473 1072
1920
1072
1
8135303521236
5302
815352
3
66
6
6
1
=
×
×
=
×+++ ×
=
×+++ ×
=
×
×









−
++−
+



+






+






+
+= −

Rev 3.0
D4161841C
8
3) High-speed draft readout Address：0x70, Bit：0, Value:1 and Address：0x81, Bit：0, Value:0
By reading 2 lines out of every 8 lines, reads out the whole valid area in approximately 1/89 seconds.
Control and setting of functions can be done by accessing the cam. When the frame rate of a partial scanning
exceeds it when the shutter mode is switched from normality (internal synchronization) or the partial
scanning mode to the draft mode, more high-speed than the setting of the speed of the shutter it is changed at
the speed of the shutter matched to the frame rate.
FVAL
DATA OUT
LVAL
DVAL
1 6 9 14 17 22 25 1233 1230 1225
313H
Effective lines : 309 lines
Reading 2 lines out of every 8 lines in
the inside of a total of 1236 lines

Rev 3.0
D4161841C
9
(3) Setup
Address：0x62, Bit：0 to 7, Value:50 to 255
You can set a setup level (pedestal).
Output Format Setup
(calculated value) Setting range Calculation formula
RGB / RAW 8bit 0
～ 31 LSB Setup
RAW 10bit 0
～ 124 LSB 4 x Setup
RAW 12bit 0
～ 496 LSB
0x00 ～ 0x1F
(0 ～ 31) 16 x Setup
* In the factory setting, the setup is set to about 264LSB.
(4) Gain
Address：0x64, Bit：0 to 7, Value:0 to 150
You can set Gain (video gain).
Gain
(calculated value) Setting range Calculation formula
0 ～ +7 dB 0x00
～ 0x4B
(0 ～ 75) 0.09375 x Gain
Notes on gain setting:
It is possible to set a maximum of +7 dB (Calculation value) but the warranty range for this product is 0
to +6 dB. When using this product, be sure to set a gain value within the warranty range.
And,Setting a too high gain value can increase noise. When you adjust the brightness of the shot image,
you are responsible for finally confirming the image quality by using the entire machine/equipment.
(5) White balance
There are two types of white balancing mode. You can set white balancing mode, according to the subject and
purpose.
1) OPWB (one-push auto white balance)
Address：0x74, Bit：0, Value:1 and Address：0x77, Bit：0, Value:1
When you execute OPWB, the white balance is automatically adjusted. After automatic adjustment, the
adjusted white balance is held. Execute OPWB, with a white subject picked up on the entire screen.
2) MANUAL (manual white balance)
Address：0x74, Bit：0, Value:0 and Address：0x75, Bit：0 to7, Value:0 to 255
In the manual white balance mode, the white balance can be adjusted manually in two ways: by preset
setting or by user setting (the user sets the R-gain and B-gain individually).
The preset setting can be selected from 6 fixed color temperatures (3000 K, 3700 K, 4000 K, 4500 K,
5500 K and 6500 K)
If you want to adjust the white balance more accurately, enter the user manual setting mode and set
R-gain and B-gain individually.
R-gain setting Address：0x78 and 0x79, Bit：0 to 7 and 0 to 2, Value:0 to 1535
B-gain setting Address：0x7A and 0x7B, Bit：0 to 7 and 0 to 2, Value:0 to 1535
(6) Gamma
Address：0x7D, Bit：0, Value:0 to 1
You can set gamma correction ON/OFF.
* When gamma correction is ON, the user cannot adjust the correction amount.
(7) Masking correction
Address：0x7E, Bit：0, Value:0 to 1
You can set masking correction ON/OFF. When masking correction is ON, the hue of images is corrected so that
it will be natural.
* When gamma correction is ON, the user cannot adjust the correction amount.

Rev 3.0
D4161841C
10
(8) Electronic shutter
Address：0x68, Bit：0 to 7, and Address:0x69, Bit:0 to 2, Value:0 to 2047
You can set the shutter speed. The setting range differs depending on the output mode.
Readout mode Shutter speed
(calculated value)
Setting range Calculation formula
All pixel readout 1/30
～ 1/65,934 s
0x4E1 ～ 0x000
(1249 ～ 0)
Partial scan 1/30
～ 1/65,934 s
0x4E1 ～ 0x000
（ 1249 ～ 0 ）
(1092 CLK + 1920 CLK x Shutter Speed) / 72 MHz
High-speed draft readout
1/89 ～ 1/65,934 s
0x138 ～ 0x000
(312 ～ 0) (1092 CLK + 2568 CLK x Shutter Speed) / 72 MHz
<For example, when you set shutter speed in 1/200 s (at All pixel readout, Partial scan)>
(1092 CLK + 1920 CLK x Shutter Speed) / 72 MHz = 1/200 s
1092+1920 x Shutter speed = 36x106/ 200
1920 x Shutter speed = 72x106/ 200 - 1092
∴
∴∴
∴ Shutter speed = (72x106/ 200 – 1092) / 1920 = 186.931... ≑
≑≑
≑ 187 = 0x0BB
when you set shutter speed in 1/200 s, Please send a write command as follows.
(1) to write data 0xBB to address 0x68, to write data 0x00 to address 0x69.
(2) to write data 0x01 to address 0x6E

Rev 3.0
D4161841C
11
(9) Random trigger shutter
Address：0x6A, Bit：0, Value:1
In the random trigger shutter mode, you can shoot and grab an image at an arbitrary timing by trigger signal input
from the external.
・ External trigger signals can be input either from the camera link I/F CC1 or I/O connector.
・ If polarity is set to negative polarity, exposure starts at the falling edge of the trigger. Address：0x6A, Bit：1
・ The random trigger shutter of this camera can be operated in two types of mode: fixed mode and pulse
width mode. How to determine the exposure time differs depending on the mode.
1) Fixed mode
Address：0x6B, Bit：0, Value:0
・ The exposure time is determined by the setting value for the shutter speed.
・ FVAL is output in sync with the first LVAL after the end of exposure time.
2) Pulse width mode
Address：0x6B, Bit：0, Value:1
・ The exposure time is determined by the pulse width (exposure time = pulse width + approximately 14 μ s).
・ Set a pulse width of 1H (approximately 26.7 μ s) or more.
・ FVAL is output in sync with the first LVAL after the end of exposure time.
Notes of trigger mode:
When the interval of the input trigger signal is extremely short, or when the trigger signal is noisy, there
is a possibility of causing the malfunction. In this case, please input a proper trigger signal.

Rev 3.0
D4161841C
12
(10) Multiple-shutter mode
Address：0x66, Bit：0, Value：1
In the multiple-shutter mode, video is output in sync with a MULTI signal from the external after the end of
exposure time.
・ Valid only when the random trigger shutter mode is ON.
・ MULTI signals can be input from the camera link I/F CC2.
・ If exposure is executed several times before MULTI signal input, the images are output superposed.
・ The exposure time is determined by the random trigger shutter mode setting and its determination method.
・ The pulse width must be set to negative polarity and 1H (approximately 26.7 μ s) to 10 ms.
・ FVAL is output in sync with the first LVAL after the end of MULTI signal input.
FVAL
DATA OUT
LVAL
DVAL
MULTI
CCD
TRIG
A B
A + B
Notes on multiple-shutter:
An image has been stored to CCD device until a MULTI signal is inputted and it begins to read out
image after CCD is exposed. Therefore, an image may degenerate step by step when an image is stored
to CCD device for a long time.
And, Electric charge is superimposed in CCD device when the multiplex exposure. Therefore, CCD will
flood with electric charge when electric charge is over superimposed in CCD device. Consequently
vertical stripes noise will appear. At that time please stop using spotlight and dimmer for example close
the iris.