Toshiba OSK102 User manual

SMART AIR CONDITIONER
USER MANUAL
IMPORTANT NOTE
Read the manual carefully before installing or
connecting your air conditioner. Make sure to
save this manual for future reference.
version B - 09 - 2018 us.toshiba-lifestyle.com

Page 2 User Manual
User Manual
1
2
3
7
4
8
5
9
6
CAUTION
DECLARATION OF CONFORMITY ........................................................................... 4
SPECIFICATION OF WIRELESS MODULE .............................................................. 4
PRECAUTIONS ................................................................................................................ 4
SYSTEM OVERVIEW ...................................................................................................... 5
DOWNLOAD AND INSTALL THE APP ................................................................... 6
CREATE YOUR ACCOUNT .......................................................................................... 7
NETWORK CONFIGURATION ................................................................................... 9
HOW TO USE THE APP ............................................................................................. 14
SPECIAL FUNCTIONS ................................................................................................. 17
• This device complies with Part 15 of the FCC Rules and RSS 210 of
Industry & Science Canada. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
• Only operate the device in accordance with the instructions supplied.
This device complies with FCC and IC radiation exposure limits set
forth for an uncontrolled environment. In order to avoid the possibility
of exceeding the FCC and IC radio frequency exposure limits, human
proximity to the antenna shall not be less than 20cm (8 inches) during
normal operation.
• Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.

User Manual Page 3
WARNING
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Page 4 User Manual
1. DECLARATION OF CONFORMITY
2. SPECIFICATION OF WIRELESS MODULE
3. PRECAUTIONS
We hereby declare that this AC is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
Model: OSK102
Standard: IEEE 802.11 b/g/n
Antenna Type: External omnidirectional Antenna
Frequency: 2.4 GHz (wireless)
Maximum Transmitted Power: 15 dBm Max
Dimensions: 41 x 24 x 5 (mm)
Operation Temperature: 0°C ~ 45°C / 32°F ~ 113°F.
Operation Humidity: 10% ~ 85%
Power Input: DC 5V/300 mA
1. Supports operating systems: iOS 7+ or Android 4+.
2. In the event of a OS update, there may be a delay between the update of
the OS and a related software update during which your OS may or may not
be supported until a new version is released. Your specic mobile phone
or problems in your network may prevent the system from working and
Toshiba will not be responsible for any problems that could be caused by
incompatibility or network issues.
3. This Smart AC only supports WPA-PSK/WPA2-PSK (recommended) encryption.
Please check the Toshiba Lifestyle website, us.toshiba-lifestyle.com, for updated
information.
4. To ensure proper scanning of the QR code, your smart phone must have at
least a 5-megapixel camera.
5. Due to unstable network connectivity, requests may time out. If this happens,
re-run the network conguration.

User Manual Page 5
4. SYSTEM OVERVIEW
6. Due to unstable network connectivity, commands may time out. If this
happens, the smartphone app and the actual product may display conicting
information. The information displayed on the actual product is always the
most accurate available. Refresh the app to re-sync.
NOTE
Toshiba will not be responsible for any problems that could be caused by
incompatibility or network issues, your wireless router and mobile phone.
Devices required to use the Smart AC:
1. Smart Phone with compatible iOS or Android system.
2. Wireless Router
3. Smart Air Conditioner
1
2 3
3
3

Page 6 User Manual
5. DOWNLOAD AND INSTALL THE APP
Android QR code Apple QR code
Scan to download app.
• You can also go to Google Play or App Store and search for Toshiba Smart AC.
For more information, please refer to Toshiba Lifestyle website: us.toshiba-
lifestyle.com.
NOTE
All the images in this manual are for reference only, your product and app
may look slightly different. The actual product and app instructions have to
be considered.

User Manual Page 7
6. CREATE YOUR ACCOUNT
6.1 Press “Sign Up”. 6.2 Enter your email address and
password.
• Make sure your smartphone is connected to your wireless router and your
wireless router has a working internet connection.
• It is recommended to activate your account immediately to be able to recover
your password by email.

Page 8 User Manual
6.3 Press “Registration”. 6.4 If you forget your password,
press “Forgot password?” on
the main menu and enter your
email address. Then press “Reset
Password”.
NOTES
• Make sure your smartphone is able to connect to the wireless network
which will be used.
• Make sure also that the device is not connecting to other networks in
range.

User Manual Page 9
7. NETWORK CONFIGURATION
7.1 Log in with your account.
7.2 Use the “+” in the top right to add appliances.

Page 10 User Manual
7.3.1 Select your AC type. 7.3.2 Turn the air conditioner on,
then wait for 5 seconds before
continuing.
7.3 Connect your device to WiFi.
90
%
90
%

User Manual Page 11
7.3.3 Press and hold VENT ANGLE/
SWING (on Portable AC) or WIFI/
WIRELESS (on Window AC)
buttons for 3-5 seconds. The unit
will enter Access Point mode and
the display will show “AP”.
7.3.4 For Android devices, you may
choose to scan the QR code on
the air conditioner for setup. If
not using a QR code, or if you are
using an iOS device, skip this step.
NOTE
On Portable AC, you can also use the
remote controller by pressing the LED
button 7 times.
90
%
90
%

Page 12 User Manual
7.3.6 Return to the “Toshiba” App, select
your preferred wireless network,
and type in your password. Then
press “Start Conguration”.
90
%
Rednet Wireless
7.3.5 Go to your phone’s wireless
network settings, connect to the
network named “net_ac_xxxx”,
(where each x is some number,
0-9 or letter, A-F) and use the
password “12345678”.
90
%

User Manual Page 13
7.3.7 The app will show you the
progress. If there is a failure,
please check your network
settings and unit and try again.
7.3.8 Name your unit.
90
%
NOTES
• When nishing network conguration, the app will indicate success by
displaying a message.
• In unstable network connections, the products may still appear on the app
as “oine”. If this happens, wait for it to show up on the device list or turn
the air conditioner’s power o. After 30 seconds, turn the unit back on and
wait a few minutes before checking again. If the unit is still oine, try the
pairing process again.
90
%

Page 14 User Manual
8. HOW TO USE THE APP
Log in and select your unit to control it from wherever you are, using your
smart phone.

User Manual Page 15
USING THE APP
BACK ARROW:
Use this arrow to
take you back to
the main screen.
1
MODE:
Use this button to
switch between
modes. Modes
may include:
AUTO, DRY, FAN,
COOL, and HEAT.
8
UNIT NAME:
This is the name
of the unit you
are currently
controlling.
2
FAN SPEED:
Use this button to
switch between
fan speeds. Fan
speeds include:
AUTO, LOW,
MEDIUM, and
HIGH.
9
SLEEP CURVE:
Use this button
to turn the SLEEP
CURVE mode on
and o.
10
FUNCTION:
Use this button to
access functions
such as the timer
and sleep curve.
3
TEMPERATUE AND
MODE DISPLAY:
This display shows
what temperature
and mode the
air conditioner is
set to.
4
POWER:
Use this button
to turn the unit
on and off.
7
INDOOR
TEMPERATURE:
This display
shows the current
temperature
indoors.
6
OUTDOOR
TEMPERATURE:
This display
shows the current
temperature
outdoors.
5
NOTE
Every function may not be supported by your
model. Please refer to your product’s user
manual for more details.
1
8
2
910
3
4
5
7
6

Page 16 User Manual
Auto mode Cool mode Dry mode
Fan mode Unit OFF

User Manual Page 17
9. SPECIAL FUNCTIONS
Functions on this page include: Timer On, Timer Off, Sleep Curve, and Check.
NOTE
Not all models display all functions. Please check your product’s user manual for
more details. If a function is not available, it will not be displayed on the function
list in the app.
With this function, you can manually select what time you would like the air
conditioner to turn on/off. Additionally, you can select which days you would like
the timer to apply to.
Timer on / Timer off
90
%
90
%
90
%

Page 18 User Manual
With this function, you can customize your air conditioner’s settings for each hour
that you are asleep. Scroll left and right to adjust up to 8 hours of the sleep curve.
Customized Sleep Curve

User Manual Page 19
With this function, you can run a self-diagnosis. The app will show a report on
key items and their status.
Self Diagnosis - “Check” Function