Toshiba RAC-PD0812CRRU User manual

USER MANUAL
Safety Precautions
Operating Instructions
Installation Instructions
Remote Control and
App Instructions
Troubleshooting Tips
Care and Cleaning
Portable Type
Room Air Conditioner
Warning notices: Before using this product,
please read this manual carefully and keep
it for future reference.
change without prior notice for product
improvement. Consult with your dealer or
the manufacturer for details.
0202-90-Cnoisrev
U
SER MAN
U
AL
Safet
y
Precautions
O
peratin
g
Instruction
s
I
nst
a
ll
a
ti
o
n Instr
u
cti
o
ns
R
em
o
te C
o
ntr
ol
a
n
d
A
pp Instruct
i
ons
T
roubleshootin
g
Tip
s
C
are and Cleanin
g
RAC-PD0812CRR12CRRU
RARAC-PD1C-PD1013C013CWRWRUU
RARAC-PD121C-PD1213C3CWRWRUU
RAC-PD1414CWRU
Portable T
y
p
e
R
oo
m Air C
o
n
d
iti
o
ne
r
Warnin
g
notices: Be
f
ore usin
g
this product
,
please read this manual care
f
ull
y
and ke
ep
it
f
or
f
uture re
f
erenc
e.
T
he desi
g
n and speci cations are sub
j
ect t
o
chan
g
e without prior notice for produc
t
im
pr
ovement. Consu
l
t wit
h
yo
ur
d
ea
l
er o
r
the manu
f
acturer
f
or details
.
vers
io
n
C
- 09 - 202
0
www.toshiba-lifestyle.com
version A - 09 - 2022 (PREVIEW01)

Page 2 User Manual
Read This Manual
Inside you’ll find many helpful hints on how to use and maintain your air conditioner properly.
Just a little preventive care on your part can save you a great deal of time and money
over the life of your air conditioner. You’ll find many answers to common problems in the
troubleshooting tips - you should be able to fix most of them quickly before calling service.
These instructions may not cover every possible condition of use, so common sense and
attention to safety is required when installing, operating and maintaining this product.
User Manual
Safety Precautions .................................................................................................................... 3
Operating Instructions ............................................................................................................ 8
Installation Instructions ........................................................................................................ 13
Care and Cleaning .................................................................................................................. 18
Troubleshooting Tips ............................................................................................................. 19
Remote Control and App Instructions ............................................................................ 20
• For support, please call the Service Center at 1-855-204-5313.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
• Children should be supervised to ensure that they do not play with the air conditioner.
• The appliance shall be installed in accordance with national wiring regulations.
• Do not operate your air conditioner in a humid room such as a bathroom or laundry room.
CAUTION

User Manual Page 3
Safety
Precautions
SAFETY PRECAUTIONS
To prevent injury to the user or other people and property damage, the instructions shown here must be
followed. Incorrect operation due to ignoring of instructions may cause harm or damage. The level of risk
is shown by the following indications.
WARNING This symbol indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
This symbol indicates a hazardous situation, which, if not avoided,
could result in minor or moderate injury.
NOTICE
This symbol addresses practices not related to physical injury.
• Be sure the air conditioner has been securely and correctly installed according to the
installation instructions in this manual. Save this manual for possible future use in removing or
installing this unit.
• Plug in power cord plug properly.
Otherwise, it may cause electric shock or re due to excess heat generation.
• Do not modify power cord length or share the outlet with other appliances as it may cause
electric shock or re due to overheating.
• Always ensure eective grounding.
Incorrect grounding may cause electric shock.
• Unplug the unit if you notice unusual sounds or smells or smoke coming from it.
A damaged product may cause re and electric shock.
• Ventilate room before operating the air conditioner if there is a gas leakage from another
appliance.
• Do not operate or stop the unit by inserting or pulling out the power cord plug.
• Do not operate with wet hands or in very humid environments.
It may cause electric shock.
• Do not allow water to come into contact with any electric parts.
It may cause failure or electric shock.
• Do not use the socket if it is loose or damaged.
It may cause re and electric shock.
• Do not use or keep the power cord close to heating appliances.
It may cause re and electric shock.
• Do not use any devices or materials for installation that are not recommended in this manual.
• Do not disassemble or modify unit.
It may cause failure and electric shock.
WARNING

Page 4 User Manual
Safety
Precautions
• Do not damage or use an alternate power cord.
It may cause re and electric shock.
If the power cord is damaged, it must be replaced by the manufacturer or an authorized service
center or a similarly qualied person in order to avoid a hazard.
• Do not direct airow straight into persons to avoid possible health hazard.
• Do not open the unit during operation.
It may cause electric shock.
• Do not use the power cord near ammable gas or combustibles, such as gasoline, benzene,
thinner, etc.
It may cause an explosion or re.
• Do not let children hang on the air conditioner or bracket.
A serious injury may occur.
• Avoid re hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not
remove any prongs from the power cord.
• Be sure the air conditioner is properly grounded. To minimize shock and re hazards, proper
grounding is important. The power cord is equipped with a three-prong grounding plug for
protection against shock hazards.
• Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle
you intend to use is not adequately grounded or protected by a time delay fuse or circuit
breaker, have a qualied electrician install the proper receptacle. Ensure the receptacle is
accessible after the unit installation.
• Be sure the electrical service is adequate for the model you have chosen. This information can be
found on the serial plate, which is located on the side of the cabinet and behind the grille.
• When the air lter is to be removed, do not touch the metal parts of the unit.
It may cause injury.
• When the unit needs cleaning, switch o, and turn o the circuit breaker.
Do not clean unit when power is on as it may cause re, electric shock or injury.
• Do not place obstacles around air inlets or inside of air outlet.
It may cause failure or accident.
• Clean with a soft cloth only. Do not use strong detergents that contain wax or thinners as it may
damage the product.
• Use caution when unpacking and installing. Sharp edges could cause injury.
• Do not clean the air conditioner with water.
Water may enter the unit and degrade the insulation which could lead to electric shock.
• Do not put a pet or house plant where it will be exposed to direct air ow.
This could injure the pet or harm the plant.
WARNING
CAUTION

User Manual Page 5
• Hold the plug by the head of the power plug when taking it out.
Otherwise, it may cause electric shock and damage.
• Ensure that the installation is properly secured to prevent the product from potentially falling.
• Do not place heavy objects on the power cord and ensure that the cord is not compressed.
Otherwise, there is danger of re or electric shock.
• If water is spilled on the unit, turn o the unit and switch o the circuit breaker. Isolate supply by
taking the power-plug out and contact a qualied service technician.
• Do not use near gas stove or other gas burning appliances, as air ow may aect gas
combustion.
• Do not use for any purpose other than room comfort.
Do not use this air conditioner to preserve precision devices, food, pets, plants, and art objects.
It may cause deterioration.
• Turn o the main power switch if the unit is not to be used for an extended time.
• Always insert the lters securely. Clean lter once every two weeks.
Operation without lters may cause failure.
• Do not drink water drained from the air conditioner.
CAUTION
Caution: Risk of fire/
flammable materials
(Required for R32/R290 units only)
IMPORTANT NOTE: Read this manual
carefully before installing or operating
your new air conditioning unit. Make sure
to save this manual for future reference.

Page 6 User Manual
Safety
Precautions
WARNING
This symbol shows that this appliance used a ammable refrigerant.
If the refrigerant is leaked and exposed to an external ignition source,
there is a risk of re.
CAUTION This symbol shows that the operation manual should be read carefully.
CAUTION This symbol shows that a service personnel should be handling this
equipment with reference to the installation manual.
CAUTION This symbol shows that information is available such as the operating
manual or installation manual.
EXPLANATION OF SYMBOLS DISPLAYED ON THE UNIT
• Do not try to accelerate the defrosting process or methods of cleaning that are not
recommended by the manufacturer.
• The appliance shall be stored in a room without a continuously operating ignition source (for
example, open ames or an operating gas appliance) or an ignition source (for example, an
operating electric heater) close to the appliance. The appliance shall also be stored in a room
without ignition sources.
• Do not pierce or burn.
• Be aware that the refrigerants may not contain an odor.
• Keep ventilation openings clear of obstruction.
• Unit is only to be serviced by a Toshiba authorized servicer, please call Customer Service at
1-855-204-5313 for support.
• Flammable refrigerant R32 is used within air conditioner. Please follow the instructions carefully
to handle, install, clean, and service the air conditioner to avoid damage or hazard. Do not
dispose of air conditioner in regular trash. Contact qualied agency for proper disposal.
• No open re or devices that generate spark/arcing shall be around the air conditioner to avoid
causing ignition of the ammable refrigerant used. Please follow the instructions carefully to
store or maintain the air conditioner to prevent mechanical damage from occurring.
WARNING (for using R32 refrigerant only)

User Manual Page 7
The power supply cord with this air conditioner
contains a current detection device designed
to reduce the risk of re.
In the event that the power supply cord is
damaged, it can not be repaired. It must be
replaced with a cord from the manufacturer.
Safety
Precautions
• Do not use this device to turn the unit on or o.
• Always make sure the RESET button is pushed in for correct operation.
• The power supply cord must be replaced if it fails to reset when either the TEST button is pushed,
or it can not be reset. Please contact Customer Service.
Grounding type wall receptacle
Do not, under any
circumstances, cut,
remove or bypass
the grounding prong.
Power supply cord with 3-prong grounding
plug and current detection device.
The power supply cord contains a current
measuring device that detects damage to the
power cord. Test your power supply cord as
follows:
1. Plug in the air conditioner.
2. The power supply cord will have TWO
buttons on the plug head. Press the TEST
button. You will notice a click as the RESET
button pops out.
3. Press the RESET Button. You will notice a click
as the button engages.
4. The power supply cord is now supplying
electricity to the unit. (On some products this
is also indicated by a light on the plug head.)
RESET
TEST
Plug in & press RESET
Operation of Current Device
NOTICE
NOTICE

Page 8 User Manual
Preparation
Control panel
Handle
(both sides)
Outlet louver
(automatic swing)
Caster
Panel
raeRtnorF
Power plug storage
Power cord storage
Bottom tray
drain outlet
Power cord outlet
Drain outlet
(heat pump
models only)
Upper air filter
(behind the grille)
Upper air intake
Air outlet
Lower air filter
Lower air intake
Drain outlet
6&$/(
Unit Operating Temperature Range:
Mode Temperature Range
Cool 62°F ~ 95°F (17°C ~ 35°C)
Dry 55°F ~ 95°F (13°C ~ 35°C)
Heat (heat pump models only) 41°F ~ 86°F (5°C ~ 30°C)
Heat (electrical heat mode) ≤ 86°F (30°C)
OPERATING INSTRUCTIONS
Operating
Instructions
Exhaust Hose Installation:
The exhaust hose and adaptor must be installed or removed in accordance with the usage mode.
For COOL, HEAT (heat pump type) or AUTO mode, exhaust hose must be installed.
For FAN, DEHUMIDIFY or HEAT (electric heat type) mode, exhaust hose must be removed.

User Manual Page 9
Operating
Instructions
Control Panel Features
Swing Button
Used to initiate the Auto Swing feature. When the
operation is ON, pressing the SWING button can
stop the louver at the desired angle.
Connect Button (Smart models only)
Also used to initiate the wireless connection mode.
To initiate the wireless connection mode, power on
the air conditioner thenpress the SWING button
for 3 seconds. The LED DISPLAY will show ‘AP’ to
indicate the unit isin wireless connection mode.
Refer to the app connection instructions to nish
the connection process.
If the connection is successful, the unit will exit
wireless connection mode and illuminate the
wireless LED. If the connection fails, the unit will
exit wireless connection mode automatically after 8
minutes and the wireless LED does not illuminate.
Note: The wireless connection process must be
completed within 8 minutes after powering the air
conditioner on.
Timer button
Used to initiate the AUTO ON start time and AUTO
OFF stop time program. T light will
illuminate depending on the selected setting.
Fan button
Controls the fan speed. Press to control the fan speed in
four steps - LOW, MID, HIGH and AUTO. The selected fan
speed light (except AUTO) will illuminate. When AUTO is
selected, no lights will illuminate.
NOTE: Applicable to models with the Constant Fan
feature. In COOL or DRY mode, press the Fan button for
the constant fan function.
When the function is turned on, the constant fan
light will illuminate, identifying the fan continuous
,
the constant fan light will go out, identifying the
fan cycle run with compressor stop.
Mode button
Selects the desired operating mode. Each time
you press the button, amode is selected in a
sequence that goesfrom AUTO, COOL, DRY,
FAN and HEAT (cooling only modelsexcluded).
The mode light illuminates and indicates the
selected mode. To change between °F or °C,
simultaneously press and hold the Up and
Down buttons for 3 seconds.
Up ( ) and Down ( ) buttons
Used to increase/decrease temperature
settings in 1°F (or 2°F)/1°C increments in a
range of 62°F/17°C to 86°F/30°C or the TIMER
setting in a range of 0 ~ 24hrs.
To change between °F or °C, simultaneously
press and hold the Up and Down buttons for
3 seconds.
Power button
Power switch on/o.
Sleep button
Used to initiate the SLEEP operation.
LED display
Shows the set temperature in °F (Degrees
Fahrenheit) or °C (Degrees Celsius) and the
Auto-timer settings. While on DRY and FAN
modes, it shows the room temperature.
Timer
Button
Swing
Button
Power
Button
Sleep
Button
Fan
Button
Up () and Down ( )
Buttons
Mode
Button
LEDWIRELESS (SMART
MODELS ONLY)
DisplayMyTemp function
Heat Mode Indicator Light
(only for heat model)
MyTemp
HEAT
3 seconds

Page 10 User Manual
Operating
Instructions
Operating Instructions
COOL operation
• Press the“MODE”button until the“COOL” indicator
light comes on.
• Press the ADJUST buttons Up ( ) or Down ( ) to
select your desired room temperature. The temperature
can be set within a range of 62°F~86°F/17°C~30°C.
• Press the“FAN SPEED” button to choose the fan speed.
HEAT operation
(available on HEAT models only)
• Press the“MODE”button until the“ ”indicator
light comes on.
• Press the ADJUST buttons Up ( ) or Down ( ) to
select your desired room temperature. The temperature
can be set within a range of 62°F~86°F/17°C~30°C.
• Press the“FAN SPEED” button to choose the fan
speed. For some models, the fan speed cannot be
adjusted while in HEAT mode.
DRY operation
• Press the“MODE”button until the“DRY” indicator
light comes on.
• While in this mode, you cannot select a fan speed or
adjust the temperature. The fan motor operates at
LOW speed.
• Keep windows and doors closed for the best
dehumidifying eect.
AUTO operation
• When you set the air conditioner to AUTO mode, it
will automatically select cooling, heating (cooling
only models excluded), or fan only operation
depending on what temperature you have selected
and the current room temperature.
• The air conditioner will control room temperature
automatically according to the temperature point
set by you.
• Under AUTO mode, you cannot select the fan
speed.
FAN operation
• Press the“MODE”button until the ”FAN“
indicator light comes on.
• Press the“FAN SPEED” button to choose the fan
speed. The temperature cannot be adjusted.
• Do not connect the duct to a window.
TIMER: Auto Start/Stop Operation
• When the unit is on, pressing the Timer button
will initiate the Auto stop program. The TIMER
OFF indicator light illuminates. Press the Up
() or Down ( ) button to select the desired
time. Press the TIMER button again within 5
seconds. The Auto start program is initiated
and the TIMER ON indicator light illuminates.
Press the Up ( ) or Down ( ) button to select
the desired Auto start time.
• When the unit is o, press the Timer button to
initiate the Auto start program. Pressing it again
within ve seconds will initiate the Auto stop
program.
• Press or hold the Up ( ) or Down ( )
button to change the Auto time by 0.5 hour
increments, up to 10 hours, then at 1 hour
increments up to 24 hours. The control will
count down the time remaining until start.
• The system will automatically revert back to
display the previous temperature setting if
there is no operation within 5 seconds.
• Turning the unit ON or OFF at any time or
adjusting the timer setting to 0.0 will cancel the
Auto Start/Stop timer program.
• Should a malfunction occur, the Auto Start/Stop
timed program will also be cancelled.
Shows Error codes and protection code:
E1 - Room temperature sensor error.
E2 - Evaporator temperature sensor error.
E3 - Condenser temperature sensor error (select models).
E4 - Display panel communication error.
P1 - Bottom tray is full - Connect the drain hose and
drain the collected water away. If protection code
repeats, call for service.
When one of the above malfunctions occurs,
turn o the unit and check for any obstructions.
Restart the Unit. If the malfunction persists, turn
o the unit and unplug the power cord. Contact
the manufacturer or its service agents or a
similar qualied person for service.
NOTICE

User Manual Page 11
Operating
Instructions
SLEEP operation
Pressing this button will increase (during cooling operation) or
decrease (during heating operation, applicable models) 1°F/1°C after
30 minutes. The temperature will again increase (cooling) or decrease
(heating) by another 1°F/1°C after an additional 30 minutes. This new
temperature will be maintained for 7 hours before returning to the
originally selected temperature. This ends the Sleep mode and the
unit will continue to operate as originally programmed.
NOTICE
The SLEEP operation feature is
unavailable inFAN orDRY mode.
Other Features
MyTemp
This feature can ONLY be activated from the remote control. The remote control serves as a remote
thermostat allowing for the precise temperature control at its location which must be within 26 feet of the
air conditioner. To activate the MyTemp feature, point the remote control towards the unit and press the
MyTemp button. The remote’s display will show actual temperature at its location and must be within
26 feet of the air conditioner to work. The remote control will send this signal to the air conditioner every
3 minutes until the MyTemp button is pressed again. If the unit does not receive the MyTemp signal
during any 7 minute interval, the unit will exit the MyTemp mode.
NOTE: This feature is unavailabe under FAN or DRY mode.
AUTO-RESTART
unexpectedly due to a power outage, it will restart with the previously set function
automatically when the power resumes.
WAIT 3 MINUTES BEFORE RESUMING OPERATION
After the unit has stopped, itcannot be restarted until 3 minutes time has elapsed. This is to protect the
unit. Operation will automatically resume after 3 minutes.
AIRFLOW DIRECTION ADJUSTMENT
The louver can be adjusted automatically using the SWING button.
• When the Power is ON, the louver opens fully.
• Press the SWING button on the panel or remote controller to initiate the Auto Swing feature. The louver
will swing up and down automatically.
• Please do not adjust the louver manually.
WATER DRAINAGE
• During Dry modes, remove the upperdrain plug from the
back of the unit and install the drain connector (5/8”universal
female mender) with 3/4”hose (locally purchased).
For models without drain connector, just attach the drain hose
to the hole. Place the end of the hose directly in the drain area
you’re using.
Remove
the upper
drain plug
Continuous
drain hose

Page 12 User Manual
WATER DRAINAGE cont.
• For Heat Pump models, remove the middle drain plug from the
back of the unit and install the drain connector (5/8” universal
female adapter) with a 3/4“ hose (not included). For models
without the drain connector, attach the drain hose to the
connector. Place the end of the hose in the drain area you’re using.
Operating
Instructions
• When the water level of the bottom tray reaches a
predetermined level, the unit beeps 8 times. The digital
display shows “P1.” At this time the air conditioning/
dehumidication process will immediately stop. However, the
fan motor will continue to operate (this is normal). Carefully
move the unit to a drain location, remove the bottom drain
plug and let the water drain away. Reinstall the bottom drain
plug and restart the machine until the “P1” symbol disappears.
If the error repeats, call for service.
NOTICE
Be sure to reinstall the bottom drain plug rmly to prevent
leakage before using the unit.
NOTICE
In Heat Pump mode, the drain hose can be elevated up to 6ft (1.8m).
Direct the hose toward the drain, making sure that there are no
kinks that will re strict water ow. Place the end of the hose into the
drain and make sure the end of the hose is directed downward
manufacturer. See Figs with ).
Figures with
X
are installation not recommended by the
manufacturer. When the continuous drain hose is not used,
ensure that the corresponding drain plug and knob are installed
rmly to prevent leaks.
¥
Drain hose
adaptor
Continuous
drain hose
Remove the
middle drain
plug
Units with
heat pump
model only
X
Drain hose
adaptor
Press the power
cord buckle into
the rear cover.
Drain
hose
adaptor
¥
Delivery lift < 6ft
Units with heat pump model only

User Manual Page 13
INSTALLATION INSTRUCTIONS
Installation
Instructions
Choosing the Right Location
Recommended Installation
Your installation location should meet the following
requirements:
•Make sure that you install your unit on an even
surface to minimize noise and vibration.
• The unit mustbe installed near a groundedplug,
and the Collection Tray Drain (found on the back of
the unit) must be accessible.
•The unit should be located at least 19.7” (50cm)
from the nearest wall to ensure proper air
conditioning.
•DO NOT cover the Intakes, Outlets or Remote Signal
Receptor of the unit, as this could cause damage to
the unit.
NOTICE About Fluorinated Gasses
c
information on the type of gas and the amount, please refer to the relevant label on the unit itself.
ed technician.
• Product recycling must be done according to local regulations.
NOTICE
erent.
50cm
19.7inch
50 cm
19.7 inch
50 cm
19.7 inch

Page 14 User Manual
Accessories
ts windows 19.4’’-62.2’’(49.3-158.1 cm).
noitpircseDtraP
Unit adaptor
Air exhaust passage
Window Sliders
Exhaust hose
Bolt
Foam seal A (adhesive)
Foam seal B (adhesive)
Foam seal C (Non-adhesive)
Security bracket and 2 screws
Drain hose
Drain hose adaptor
(For heat pump mode only)
Remote controller and battery
(For remote control models only)
1 pc
1 pc
1 pc
4 pc
1 pc
1 pc
2 pc
1 set
1 set
Quantity
1 pc
Power Cord Buckle
Tools Needed
• Phillips screwdriver
• Tape measure or ruler
• Knife or scissors
• Saw (optional, to shorten window adaptor for narrow windows).
Installation
Instructions
4 pc
2 pc
3 pc

User Manual Page 15
Installation
Instructions
Window Installation Kit
1: Preparing the exhaust hose assembly
Press the exhaust hose into the Air exhaust
passanger and unit adaptor, clamp automatically
by elastic buckles of the adaptors.
2: Install the exhaust hose assembly to the
unit
Insert the unit adapter side of the exhaust hose
assembly into the groove of the air outlet on
the back of the unit. Align the hook of the unit
adapter with the seat on the air outlet and slide
the assembly down until seated.
3: Preparing the adjustable window slider
1. Depending on the size of your window,
adjust the size of the window slider.
2. If the length of the window requires two or
more window sliders, use the bolt to fasten
the window sliders once they are adjusted
to the proper length.
Exhaust hose
assembly
Exhaust hose
Unit adaptor Air exhaust
passage
Hook
Hole Seat
Lower
groove
Adaptor Make sure the adaptor
is inserted into the
lower groove of the
air outlet.
Hung Window Sliding Window
Windows Type
Window
slider A
Window
slider A
1+2：
Bolt
1+2+3：
Bolt
Bolt
1+2+3+4：
Bolt
BoltBolt
1+4：
Bolt
Window
Sliders
After assembly
Before assembly

Page 16 User Manual
Type 1: Hung window installation
1. Cut the adhesive foam seal A and B strips to the proper lengths,
and attach them to the window sash and frame as shown.
2. Insert the window slider assembly into the window opening.
3. Cut the non-adhesive foam seal C strip to match the width of
the window. Insert the seal between the glass and the window
frame to prevent air and insects from getting into the room.
4. If desired, install the security bracket with 2 screws as shown.
5. Insert the window slider adaptor into the hole of the window
slider.
NOTICE
Once the Exhaust Hose assembly and Adjustable Window Slider are prepared, choose from one of
the following two installation methods.
Foam seal B
(Adhesive type-shorter)
Foam
seal A
(Adhesive
type)
Window
slider A
Window
slider B
(if required)
Foam seal C
(Non-adhesive type)
Security Bracket
2 Screws
Installation
Instructions

User Manual Page 17
Type 2: Sliding window installation
1. Cut the adhesive foam seal A and B strips to the proper lengths,
and attach them to the window sash and frame as shown.
2. Insert the window slider assembly into the window opening.
3. Cut the non-adhesive foam seal C strip to match the window
height. Insert the foam seal between the glass and the window
frame to prevent air and insects from getting into the room.
4. If desired, install the security bracket with 2 screws as shown.
5. Insert the window slider adaptor into the hole of the window
slider.
Foam seal B
(Adhesive
type-shorter)
Foam seal A
(Adhesive
type)
Foam seal C
(Non-adhesive type)
2 Screws
Security
Bracket
NOTICE
To ensure proper function, DO NOT overextend or bend the hose. Make sure that there are
no objects within 20in (~500mm) of the exhaust hose. All illustrations in this manual are for
explanation purposes only, your air conditioner may be slightly dierent than shown.
Window slider A
Window slider B
(if required)
Installation
Instructions

Page 18 User Manual
Air Filter Cleaning
Unit Cleaning
Store the Unit When Not in Use
Safety Precautions
CARE AND CLEANING
Care and Cleaning
• Always unplug the unit before cleaning or servicing.
• DO NOT use flammable liquids or chemicals to clean the unit.
• DO NOT wash the unit under running water. Doing so causes electrical danger.
• DO NOT operate the machine if the power supply was damaged during cleaning. A damaged
power cord must be replaced with a new cord from the manufacturer.
Clean the unit using a damp, lint-free cloth and mild detergent. Dry the unit with a dry, lint-free cloth.
• Drain the unit’s water collection tray according to the instructions in the following section.
• Run the unit on FAN mode for 12 hours in a warm room to dry it and prevent mold.
• Turn o the unit and unplug it.
• Clean the air filter according to the instructions in the previous section. Reinstall the clean, dry
filter before storing.
• Remove the batteries from the remote control.
Remove the
air filter
Upper
filter
(take out)
Take the
lower filter
out.
lower filter A
Upper air filter
(combined
filter with grill,
take out)
lower filter B
(take out)
(Press the grill
down slightly
and pull the
lower filter A out
at the same time)
Only for MODEL
RAC-PD1414CWRU
Only for MODEL
RAC-PD0812CRRU,
RAC-PD1013CWRU and
RAC-PD1213CWRU
NOTICE
Be sure to store the unit in a cool, dark place. Exposure to direct sunlight or extreme heat can
shorten the lifespan of the unit.
Maintenance Tips
• Be sure to clean the air filter every 2 weeks
for optimal performance.
• The water collection tray should be drained
immediately after P1 error occurs, and
before storage to prevent mold.
• In households with animals, you will have to
periodically wipe down the grill to prevent
blocked airow due to animal hair.
• RAC-PD0812CRRU, RAC-PD1013CWRU and
RAC-PD1213CWRU’s air lters are built into
and part of the rear grill.
DO NOT operate the unit without lter because
dirt and lint will clog it and reduce performance.
CAUTION

User Manual Page 19
TROUBLESHOOTING TIPS
Troubleshooting
Tips
Before calling service, review this list. It may save you time and expense. This list includes common
occurences that are not the result of defective workmanship or materials of this appliances.
NOTICE
Do not add extension to the exhaust hose(s)!
Problem Solution
Unit does not turn
on when pressing
ON/OFF button
Displays P1 Error Code and means the water collection tray is full. Turn o the
unit, drain the water from the water collection tray, and restart the unit.
If room temperature is lower than the set temperature in COOL mode, reset
the temperature.
Unit does not cool
well
The air lter is blocked with dust or animal hair. Turn o the unit and clean the
lter according to the instructions.
Exhaust hose is not connected or is blocked. Turn o the unit, disconnect the
hose, check for blockage and reconnect the hose.
Temperature setting is too high; decrease the set temperature.
Make sure all windows and doors are closed.
The room area could be too large; doublecheck the cooling area.
Check the room for possible heat sources and remove them if possible.
The unit is noisy and/
or vibrates too much
The oor is not level. Place the unit on a at, level surface.
The air lter is blocked with dust or animal hair. Turn o the unit and clean the
lter according to the instructions.
The unit makes a
gurgling sound
This sound is caused by the refrigerant ow inside the unit and is normal.
Unit will not connect
to Wireless or App
does not work
(some models)
For additional support and troubleshooting tips, follow the link in the QR code:

Page 20 User Manual
Remote Control Specifications
Function Buttons
REMOTE CONTROL AND APP INSTRUCTIONS
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the Operating Instructions section of this manual.
5GRledoM BGEFU1
Rated voltage 3.0V (Dry batteries R03/LR03x2)
Signal receiving range 26 ft. (approx. 8 m)
Environment 23°F ~ 140°F (-5°C ~ 60°C)
MyTemp
Turns the MyTemp feature on and off.
SHORT CUT
Sets and activates your favorite pre-settings.
Turns the unit on or off.
TEMP
Increases temperature in 1° increments.
Max. temperature is 86°F (30°C).
TIMER ON
Sets timer to turn unit on (see Basic
Functions for instructions)
TIMER OFF
LED
Turns the AC’s LED display on and off.
SWING
Starts and stops
louver movement.
SLEEP
Saves energy during
sleeping hours.
TEMP
Decreases temperature in 1° increments.
Min. temperature is 62°F (17°C).
NOTE: Pressing and holding and buttons
together for 3 seconds will alternate the
temperature display between the °F & °C scale.
Selects fan speeds in the
following order:
AUTO LOW MED HIGH
MODE
Scrolls through operation modes
as follows:
AUTO COOL DRY HEAT FAN
NOTE:
Please do not select HEAT mode
if the machine you purchased is
cool-only type. Heat mode is not
supported by cool-only models.
ON/OFF
FAN SPEED
MyTemp
Sets timer to turn unit off (see Basic
Functions for instructions)
Remote Control and
App Instructions