Toshiba RAS-10JKCVP Series User manual

Toshiba air conditioner
Á¦ºÉ°¦´°µµ«Ã·µ
Owner’s Manual
¼n¤º°µ¦Äoµ
1110650159
Indoor unit ´ªÁ¦ºÉ°£µ¥Ä
RAS-10JKCVP Series
RAS-13JKCVP Series
RAS-18JKCVP Series
Outdoor unit ´ªÁ¦ºÉ°£µ¥°
RAS-10JACVP Series
RAS-13JACVP Series
RAS-18JACVP Series
•Thank you for purchasing Toshiba room air conditioner this time.
•To use this product safety and properly, please read and understand this owner’s manual
carefully before use.
•Please store this manual at a place where anyone can refer anytime.
•°»¸ÉÁ¨º°ºÊ°Á¦ºÉ°¦´°µµ«Ã·µ
•Ã¦«¹¬µ¼n¤º°µ¦Äoµ¸Ê°¥nµ¨³Á°¸¥n°Á¦·É¤Äoµ Á¡ºÉ°Ä®oµ¤µ¦Äoµ¨·£´r¸ÊÅo°¥nµ¨°£´¥Â¨³¼ª·¸
•Ã¦ÁÈ¼n¤º°¸ÊŪoÁ¡ºÉ°Äo°oµ°·Ä°µ
1110650159_(CV).indd 1
1110650159_(CV).indd 1
2/28/11 2:16 PM
2/28/11 2:16 PM

Contents
Automatic, Direct air flow and Indirect air flow
Air conditioner selects the operation automatically depending on the set temperature.
When “Direct air flow” or “Indirect air flow” is selected while comfort air flow, wind blow
to left and right direction can be adjusted automatically such as blowing the direction
to the people (when “Direct air flow”) or escape the people (when “Indirect air flow”).
While no people in the room or the room is dark, the power is saved automatically by
the economic operation.
Precautions for safety page 4
Surely follow these instructions
Parts name page 5
Indoor unit........................................................................................................................... 5
Outdoor unit....................................................................................................................... 6
Accessories (attachment and detachment of remote control holder) ........ 6
Remote controller........................................................................................................... 7
Preparation before operation and checking page 9
Insert the batteries......................................................................................................... 9
Setting the clock ............................................................................................................. 9
Check transmitting and receiving ......................................................................... 10
Automatic operation page 11
Operation details of automatic operation......................................................... 12
Cooling, Dry operation
and Fan only operation page 13
Picoion air purifier page 15
When used together with the air conditioning............................................... 15
Mechanism of Picoion air purifier ......................................................................... 15
Air volume, Fix and Swing page 16
When change the air volume .................................................................................. 16
When change the air direction................................................................................ 16
When swing....................................................................................................................... 16
Movement of vertical air direction louver ......................................................... 16
Comfort air flow page 17
Direct air flow, indirect air flow, wide air flow and spot air flow
Wide air flow, Spot air flow page 18
Timer operation page 19
Comfort sleep................................................................................................................... 19
Timer on/Timer off.......................................................................................................... 20
Daily timer........................................................................................................................... 20
2
1110650159_(02-10)_EN.indd 2
1110650159_(02-10)_EN.indd 2
2/28/11 2:09 PM
2/28/11 2:09 PM

Picoion air cleaning
Picoion spreaded in the room eliminates the bacteria in the air and cleans the air.
Furthermore, dirt in the room is collected in the air conditioner and washed with the
drain water automatically.
Also, the ion mist effect of Picoion gives the moisture to the skin and hair.
When the lamp of indoor unit blinks page 32
Auto Restart Setting page 33
How to set Auto Restart.............................................................................................. 33
At a times like this page 34
If the remote controller is not available ............................................................. 34
In case of 2 air conditioners are installed near each other.................... 34
Concern about the operating noise..................................................................... 34
These are not failures page 35
Operation lamp ......................................................................................................................... 35
Remote controller operation .................................................................................... 35
A noise sounds ................................................................................................................ 36
Operation and behavior of the air conditioner............................................... 37
Open-close panel........................................................................................................... 37
Vapor or condensation appear ............................................................................... 38
Filter cleaning................................................................................................................... 38
Odor and dirt..................................................................................................................... 38
Set preferrred operation page 21
PRESET operation........................................................................................................ 21
Energy Saving page 22
ECO operation................................................................................................................. 22
Limit maximum
Current and Power consumption
page 23
POWER-SELECTION operation........................................................................... 23
Indoor unit displays page 24
Automatic cleaning page 25
Automatic cleaning operation ................................................................................. 25
About Automatic cleaning.......................................................................................... 25
Care and cleaning page 26
Care of the outside casing........................................................................................ 26
Care of front panel......................................................................................................... 27
Care of dust box ............................................................................................................. 28
Care and cleaning of brush unit ............................................................................ 29
Care and cleaning of Air filter.................................................................................. 30
Test run after care and cleaning............................................................................ 31
When not used for a long time ............................................................................... 31
3
1110650159_(02-10)_EN.indd 3
1110650159_(02-10)_EN.indd 3
2/28/11 2:09 PM
2/28/11 2:09 PM

Precautions
for safety Surely follow these instructions
CAUTION
• Check that the circuit breaker is installed correctly. If the circuit breaker
is not properly installed, it may cause an electric shock. To check the
installation method, please contact the supplying retail dealership or the
professional vendor who installed the unit.
• When using the unit in a closed room, or operating with other combustion
appliances, make sure to open a window occasionally for ventilation.
Insufficient ventilation may cause suffocation due to a lack of oxygen.
• Avoid operating for long periods in a high humidity environment (over 80%)
such as with the windows or doors open. There may be condensation on
the indoor unit and droplets may fall onto the furniture.
• When the unit won’t be used for a long time, turn off the main switch or the
circuit breaker.
• It is recommended that maintenance be performed by a specialist when the
unit has been operated for a long time.
• At least once a year check if the mounting table of the outdoor unit is
damaged or not. If a damaged state is ignored, the unit may fall or over-turn,
causing an injury.
• Stand on a sturdy ladder when attaching/detaching the front panel/air filter/
air cleaning filter. Failure to do so may cause a fall or injury.
• Do not stand on the outdoor unit or place anything on the unit. It may be
the cause of injury due to falling or over-turning. Any damage to the unit
may cause an electric shock or fire.
• Do not use combustion appliances in the direct flow of the air from the
air-conditioning unit. Poor combustion of a combustion appliance may
cause suffocation.
• Do not place anything around the outdoor unit or allow fallen leaves to
accumulate around it. If there are fallen leaves, small animals could enter
and contact internal electrical parts, causing a failure or fire.
•
Do not place animals and plants in places where wind from the air-
conditioning
unit flows directly. It may have a negative influence on the
animal or plant.
• Ensure that drained water is discharged. When the discharging water
process is not sufficient, water may leak, causing water damage to furniture.
To check that the installation method used is correct, please contact the
supplying retail dealership or the professional vendor who installed the unit.
• Do not place any containers such as a vase containing fluid on the unit. It
might cause water to enter the unit and deteriorate the electrical insulation,
causing an electric shock.
• Do not use for special applications such as storage of food or animals, or
to display plants, precision devices, or art objects. Do not use on ships or in
other vehicles. It may cause a failure in the air-conditioning unit. In addition,
it may damage these items.
• Do not place other electrical appliances or furniture under the unit. Water
droplets might fall, causing damage or failure.
• When cleaning, you must stop operating the unit and turn off the circuit
breaker. Since the fan inside may be rotating at high speed, it may cause
an injury.
• Do not wash the main air-conditioning unit with water. It may cause an
electric shock.
• After the front panel/air filter is cleaned, wipe away any water and allow to
dry. If water remains, it may cause an electric shock.
• Once the front panel is removed, do not touch the metal parts of the unit. It
may cause an injury.
• Do not touch the air intake section or the aluminum fins of the unit. It may
cause injury.
• When you hear thunder and there might be a lightning strike, stop
operating the unit and disconnect the circuit breaker. If lightning strikes, it
may cause a failure.
• The manufacturer shall not assume any liability for the damage caused by
not observing the description of this manual.
• Batteries for remote control unit:
- Should be inserted with correct polarity (+) and (-).
- Should not be recharged.
- Do not use batteries for which the “Recommended usage period” has
expired.
- Do not keep used batteries inside the remote control unit.
- Do not mix different types of batteries, or mix new batteries with old ones.
- Do not directly solder the batteries.
- Do not short-circuit, disassemble, heat, or throw batteries into a fire. If
batteries are not disposed of correctly, they may burst or be the cause
of fluid leakage, resulting in burns or injuries. If touching the fluid, wash
thoroughly with water. If it touches devices, wipe off to avoid direct contact.
- Do not place within reach of small children. If a battery is swallowed,
consult a doctor immediately.
DANGER
•Do not install, repair, open or remove the cover. It may expose you to
dangerous voltages. Ask the dealership or the specialist to do this.
•Turning off the power supply will not prevent potential electric shock.
•The appliance shall be installed in accordance with national wiring regulation.
•Means for disconnection from the supply having a contact separation of at
least 3 mm in all poles must be incorporated in the fixed wiring.
WARNING
• Do not expose your body directly to cool air for a long time.
• Do not insert your finger or any article into the air inlet/outlet.
• When an abnormality (burning smell, etc.) occurs, stop the air conditioner
and turn off the circuit breaker.
• Installation must be requested from the supplying retail dealership or
professional installation vendors. Installation requires special knowledge
and skill. If customers install on their own, it can be a cause of fire, electric
shock, injury or water leakage.
• Do not select a location for installation where flammable gas may leak. If
there is any gas leakage or accumulation around the unit, it can be a cause
of fire.
• Do not turn ON/OFF the circuit breaker or operate buttons with a wet hand.
It may be a cause of electric shock.
• Do not disassemble, modify or relocate the unit by yourself. It may become
the cause of fire, electric shock, or water leakage. For repair or relocation,
please request service from the supplying retail dealership or a Toshiba
dealership.
• Do not select a location for installation where there may be excessive water
or humidity, such as a bathroom. Deterioration of insulation may be a cause
of electric shock or fire.
• When relocating or repairing the unit, please contact the supplying retail
dealership. When there is a kink in the wiring, it may be the cause of electric
shock or fire.
• During an error (such as a burning odor or not cooling), stop operating the
unit and turn off the circuit breaker. Continuous operation may be a cause
of fire, or electric shock. Please request repair or service from the supplying
retail dealership or a Toshiba dealership.
• Earth work should be requested from the supplying retail dealership or
professional vendors. Insufficient grounding work may be the cause of
electric shock. Do not connect the earth wire to a gas pipe, water pipe,
lightning conductor, or telephone earth wire.
• If the indoor unit piping outlet is exposed due to relocation, close the opening.
Touching internal electrical parts may cause injury or electric shock.
• Do not insert any material (metal, paper, or water, etc.) into the air outlet or
air intake opening. Fan may be rotating at high speed inside or there are
high voltage sections, which may cause an injury or electric shock.
• You must use an independent power outlet for the power supply. If a power
outlet other than the independent outlet is used, it may cause a fire.
• When the air-conditioning unit does not cool there may be a leakage of
refrigerant. Please consult the supplying retail dealership. The refrigerant
used in the air-conditioning unit is safe. It will not leak under normal
operating conditions but if it leaks into the room and contacts a heat source
such as a heater, or stove, it may cause a harmful reaction.
• When water or other foreign substances enter the internal parts, stop
operating the unit immediately and turn off the circuit breaker. Operating
the unit continuously may cause fire or electric shock. Please contact the
supplying retail dealership for repair.
• Do not clean the inside of the air-conditioning unit yourself. Please request
internal cleaning of the air-conditioning unit from the supplying retail
dealership. Incorrect cleaning may cause breakage of resin parts or insulation
defects of electrical parts, causing water leakage, electric shock or fire.
• Do not damage or modify the power cable. Do not connect the cable
midway, or use a multiple outlet extension cord that is shared by other
devices. Failure to do so may cause fire.
• Do not place heavy objects on the power cable, expose it to heat, or pull it.
To do so may cause electrical shock or fire.
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or intruction
concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the
appliance.
• Do not use any refrigerant different from the one specified for complement
or replacement.
Otherwise, abnormally high pressure may be generated in the refrigeration
cycle, which may result in a failure or explosion of the product or an injury to
your body.
4
How to operate More conveniently Care and cleaning When troubled or when necessary
1110650159_(02-10)_EN.indd 4
1110650159_(02-10)_EN.indd 4
2/28/11 2:09 PM
2/28/11 2:09 PM

When the front panel is opened
Parts name
Air inlet
Front panel
Open-close panel
Infrared signal receiver
and Reset button
Filter cover
Dust box
Vertical wind direction louver
Horizontal wind direction louver
Air outlet
Picoion generator
Air filter
(The air filter comes out for a certain period from the
upper part of the indoor unit while filter cleaning. It
can be checked that the filter cleaning is operating.)
Plasma ion charger (Air purifier)
Temperature sensor and
Humidity sensor
Real time monitor
Active human search sensor
(Active human search sensor
moves right and left only while
Automatic operation, Direct air
flow or Indirect air flow is set.)
Brightness search sensor
Indoor unit
5
How to operateMore convenientlyCare and cleaningWhen troubled or when necessary
1110650159_(02-10)_EN.indd 5
1110650159_(02-10)_EN.indd 5
2/28/11 2:09 PM
2/28/11 2:09 PM

(Blue) (Orange)
Operating, Timer set, Economic operation, Picoion air purifier
operation or Automatic cleaning operation (while cleaning operation)
are indicated by the lamps.
“PURE · DUST BOX lamp”
(Blue)/(Orange)
“OPERATION lamp”
(Green)
<Remote controller receiving
module> Reset button
Outdoor unit Accessories
Air outlet
These holes are
opened when drained.
Drain outlet
(Bottom)
Piping and cable
Drain pipe
(Drain hose)
Grounding screw
Air inlet
(Back and
lateral sides)
Real time monitor display
Indoor unit display Operating status and room temperature are informed.
All part of display portion are indicated for explanation.
“Eco” mark
“Picoion” mark
“Dry” (Green)
“Cooling” (Blue)
“Real time monitor”
LED Display can be off
Page 24
Remote controller Remote controller holder
Dry batteries (2 pieces)
AAA alkaline dry batteries
Attachment screws for remote
controller holder (2 pieces)
How to attach the remote controller holder.
Attach the remote controller holder to the wall or the column with
the contained attachment screws for remote controller holder.
Remote controller holder
Screws for remote
controller holder
attachment
How to attach to / detach from the
remote controller holder.
Insert the stick out of the remote controller
holder into the hole of the lower remote
controller and set it while pressing toward
the direction of arrow.
Detach it in the reverse procedures.
Hole
Stick out
“TIMER · SAVE lamp”
(Orange)
6
How to operate More conveniently Care and cleaning When troubled or when necessary
1110650159_(02-10)_EN.indd 6
1110650159_(02-10)_EN.indd 6
2/28/11 2:09 PM
2/28/11 2:09 PM

TEMP.
PRESET
Hi POWER ECO
POWER SEL
˚C
˚F
Cover
Parts name (continued)
Remote controller
Transmitting part
Memory and recall user
setting operation
Start and Stop
operation
Kind of receiving tone
When the Indoor unit receives the signal from the
remote controller, the receiving tone sounds.
..........Operation, change
..........Stop
..........Notice
When the notice sounds, it means the
operating setting returns to the datum point.
(Example) When temperature setting.
Datum points
Adjust temperature or timer
How to open the remote controller
cover
Pull it your side while slightly pressing the upper part
of the cover.
22°C 23°C 24°C 25°C 26°C
Pi Pi Pi Pi
PiPi
Pi
PiPi
PiPi
Pi
Temperature 24°C Swing Cancel
Air volume Automatic Horizontal
wind direction Straight
Air flow Cancel Vertical wind
direction Lower limit
7
How to operateMore convenientlyCare and cleaningWhen troubled or when necessary
1110650159_(02-10)_EN.indd 7
1110650159_(02-10)_EN.indd 7
2/28/11 2:09 PM
2/28/11 2:09 PM

ON OFF SET CLR
MODE SWING FAN
AIR FLOW
FIX FIX
ECO
Hi POWER
PURE
COMFORT
SLEEP
POWER-SEL
CLOCK CHECK FILTER RESET
TEMP.
PRESET
Hi POWER ECO
POWER SEL
˚C
˚F
When open the cover
Remote control when open cover
Notes
•Do not drop or spill with water.
•Do not place where temperature rises or falls (For example exposed to direct sunlight, near a stove, on the TV, hot floor or near a window).
•When other electric appliances are activated by the remote controller, isolate the appliances or consult the distributor.
•In case of using fluorescent lamp near indoor unit, the remote signal may not arrive to infrared signal receiver and affect air conditioner ON-OFF operation.
•Do not insert a needle or bar into the opening.
B mode display
Signal sending display
Clock and timer setting display
Comfort sleep display
Power selection display
Air flow selection display
Hi-Power operation display
Mode selection button
Air flow selection button
ECO operation button
Picoion air purifier button
Clock setting button
Check button
Louver swing button
Fan speed selection button
Louver direction selection button
Hi-Power operation button
Timer setting button
Reset button
Filter clear button
Mode selection display
Swing On/Off display
Setting temperature display
Temperature unit select
Check mode display
Preset operation display
Fan speed selection display
Picoion air purifying display
Quite speed display
ECO operation display
Power selection operation button
Comfort sleep button
All indicators are shown for explanation.
8
How to operate More conveniently Care and cleaning When troubled or when necessary
1110650159_(02-10)_EN.indd 8
1110650159_(02-10)_EN.indd 8
2/28/11 2:09 PM
2/28/11 2:09 PM

Insert the battery
Remote controller
Remove the cover
and insert AAA
alkaline dry batteries
1
Pull the cover to
your side firmly
Insert direction of
(+) and (-) correctly
Pull the cover to
your side firmly
Press the CLOCK button
•Adjust the time referring to the
“Setting the clock” in the right side.
2
Press with the diminished bar
Attach the cover
3
Notes
•The life of dry batteries is approx. 1 year in normal use.
•
Battery is required to replace if no sound received from indoor unit or a failure to select the desired function.
•When replacing the batteries, replace with 2 new AAA alkaline dry batteries of the same kind.
•If not using for 1 month or more, remove the batteries to avoid failure.
Setting the clock
Press the CLOCK button
1
Press with the diminished bar
Adjust the “Time”
2Forward
Backward
TEMP.
•The time changes by 1 minute when pressed
once. The time changes by 10 minutes interval
when pressed continuously.
Confirm “Time”
3
Preparation before operation
and checking
ON OFF SET CLR
MODE SWING FAN
AIR FLOW
FIX FIX
ECO
Hi POWER
PURE
COMFORT
SLEEP
POWER-SEL
CLOCK CHECK FILTER RESET
TEMP.
PRESET
When open the cover
SET
9
How to operateMore convenientlyCare and cleaningWhen troubled or when necessary
1110650159_(02-10)_EN.indd 9
1110650159_(02-10)_EN.indd 9
2/28/11 2:09 PM
2/28/11 2:09 PM

Indoor unit
Turn on the main power supply
•It takes 3 to 8 minutes for the preparation of operation after the power supply is on. During this period, the operation lamp illuminates. However the
operation does not start.
Check transmitting and receiving
Point the remote controller at the infrared signal receiver on the indoor unit.
•Correct signal is confirmed by the receiving tone and the operation lamp illuminates.
•When button is pressed, receiving tone sound and the operation stops.
•Check that the signal is transmitted and received at the installed position if the remote controller is fixed to the remote controller holder.
PURE
The receiving and
transmitting distance.
Approx. 7m from straight
in front of the main unit.
Notes
•Use the remote controller where the indoor unit can receive the signal. It does not work if the signal is obstructed by curtains or sliding doors.
•The distance for transmitting and receiving is shorter if a bright light such as sunlight affect the transmitting and receiving portion of the main unit.
•The distance for transmission and receiving is shorter if the remote controller is operated from an oblique direction of the main unit.
10
How to operate More conveniently Care and cleaning When troubled or when necessary
1110650159_(02-10)_EN.indd 10
1110650159_(02-10)_EN.indd 10
2/28/11 2:09 PM
2/28/11 2:09 PM

Automatic operation
The air conditioner selects the cooling mode and operates it. At the same time the active human
sensor detects the movement of people. If no person is detected, it operates in economic operation
mode. Also the brightness search sensor detects the brightness of the room and operates in
economic operation mode automatically.
When starting automatic operation, select A
•The air volume is “Automatic” only.
MODE
When changing the temperature TEMPERATURE
•Changes by 1°C when pressed
once. It changes continuously if
pressed continuously.
•The temperature range available
is 17°C - 30°C.
PiPi
sounds when reaching 24°C.
TEMP.
Rise
Lower
Automatic operation
•Active human search sensor.
It detects people (heat generation) by moving left and right, adjusts the room temperature
depending on the movement of people and operates in economic operation mode. Also if detecting
the absence of people, it operates more economically.
•Brightness search sensor.
Brightness level of the room (around the indoor unit)
is detected and economic operation mode is activated
when it is dark.
Operation of active human sensor.
Notes
•It may sense as no people in the below cases.
• No moving people.
• Less movement or slight movement by kid.
• When turning the back.
• Exposure of skin is less.
• Movement of people is behind the furniture.
• Room temperature is high.
•High temperature objects or small animals such as dogs or cats may be sensed as people.
•It may take time until the air direction changes.
•When the direction of Direct air flow and Indirect air flow does not move to the desired
direction, set to the desired direction using the air direction setting.
(Blue) (Orange)
ON OFF SET CLR
MODE SWING FAN
AIR FLOW
FIX FIX
ECO
Hi POWER
PURE
COMFORT
SLEEP
POWER-SEL
CLOCK CHECK FILTER RESET
TEMP.
PRESET
POWER SEL
˚C
When stops.
•After stopping, automatic cleaning operation starts.
(TIMER lamp turn on)
※When operating period is less than 10 minutes,
the cleaning operation is not performed. Page 25
When PiPi sounds,
it notices that the operation setting returns to the datum
point. Page 7
OPERATION : Green light
illuminates
POWER SEL
˚C
11
1110650159_(11-20)_EN.indd 11
1110650159_(11-20)_EN.indd 11
2/28/11 2:10 PM
2/28/11 2:10 PM

Economic operation activated by active human search sensor.
•When the active human search sensor detects the absence of people for 60 minutes continuously. It operates economic operation mode with a higher
temperature setting while cooling.
•Further, when absence of people is detected for 4 hours continuously. It operates economic operation with more energy saving.
•When the active human search sensor detects people (heat generation) while economic operation mode is active after absence detection. It returns to the
original operating condition.
Operation details of automatic operation
While
cooling
Higher
After 60
minutes
After 4
hours
More energy saving
Economic operation activated by the brightness search sensor.
•When the brightness sensor detects darkness around the indoor unit, it operates economic operation mode with a higher set temperature while cooling.
While
cooling
Higher
Notes
•The lamp in the indoor unit display and the real time monitor are darken automatically during economic operation mode. During the operation activated by
the active human search sensor, the save lamp turns on.
•Economic operation mode may reduce cooling capacity based on room condition automatically.
Choose cooling operation when insufficiency cooling is felt.
12
1110650159_(11-20)_EN.indd 12
1110650159_(11-20)_EN.indd 12
2/28/11 2:10 PM
2/28/11 2:10 PM

Temperature and air volume for the cooling operation can be set as you prefer.
(Blue) (Orange)
Cooling
ON OFF SET CLR
MODE SWING FAN
AIR FLOW
FIX FIX
ECO
Hi POWER
PURE
COMFORT
SLEEP
POWER-SEL
CLOCK CHECK FILTER RESET
TEMP.
PRESET
POWER SEL
˚C
When PiPi sounds,
it notices the operation setting returns to the datum point.
Page 7
Cooling
operation
Dry operation
Fan only
operation
OPERATION : Green light
illuminates
Cooling, Dry operation
and Fan only operation
MODE
MODE
POWER SEL
˚C
POWER SEL
˚C
MODE
POWER SEL
13
1110650159_(11-20)_EN.indd 13
1110650159_(11-20)_EN.indd 13
2/28/11 2:10 PM
2/28/11 2:10 PM

For dehumidification, a moderate cooling performance is controlled automatically.
Dry
operation
When changing the temperature
•The temperature changes by 1°C when pressed. It changes
continuously when pressed continuously.
•The available setting range is 17°C – 30°C.
When at 24°C
PiPi
When stopping
•Automatic cleaning starts after the operation
stops.
(TIMER lamp turns on)
※Cleaning does not operated if the operating
time is 10 minutes or less. Page 25
Notes
•Refrigerant flow may make a noise, however this is not defect.
•When the outside temperature is low, the temperature in the room may become lower than the temperature selected.
•At Dry mode, the fan speed is set to Auto only.
Up
Down
TEMP.
14
1110650159_(11-20)_EN.indd 14
1110650159_(11-20)_EN.indd 14
2/28/11 2:10 PM
2/28/11 2:10 PM

15
(Blue) (Orange)
Picoion air purifier
Capture efficiency of floating virus and mold fungus in the air is accelerated by the Picoion and
plasma ion charger. They are caught in the air conditioner eliminated and discharged with the
drain water. Thus, the air discharged by the air conditioner is kept clean.
ON OFF SET CLR
MODE SWING FAN
AIR FLOW
FIX FIX
ECO
Hi POWER
PURE
COMFORT
SLEEP
POWER-SEL
CLOCK CHECK FILTER RESET
TEMP.
PRESET
POWER SEL
˚C
When stopping operation.
•After stopping, automatic cleaning starts
(TIMER lamp turns on).
※When operating time is 10 minutes
or less, cleaning does not operated.
Page 25
or
When used together with the air conditioning
Air volume and direction setting of air conditioner have priority.
Operate Picoion air purifier
while air conditioning.
Operate air conditioning during
Picoion air purifier.
Stop both Picoion air purifier
and air conditioning.
Stop only Picoion air purifier.
Press the
PURE
button.
Press MODE to select.
Press the button.
Press the
PURE
button.
OperationStop
Notes
•Picoion air purifier operation does not remove harmful substances from cigarette smoke
(carbon monoxide etc.). Open a window occasionally for ventilation.
•Picoion air purifying works by the combination of the Picoion and the plasma ion charger.
Mechanism of Picoion air purifier
Collects bacteria
in the plasma
ion charger !
Drain out waste
water outside !
Deactivate bacteria
in the air !
Picoion release !
Bacteria
eliminated
Plasma
ion charger
Picoion
generator
Draining
the
water
Heat exchanger is
rinsed by
condensed water.
Deactivated bacteria
adhering to the heat
exchanger !
PURE : Blue light
illuminates
To clean the air,
Picoion air purifier
PURE
PURE
OPERATION : Green light
illuminates
1110650159_(11-20)_EN.indd 15
1110650159_(11-20)_EN.indd 15
2/28/11 2:10 PM
2/28/11 2:10 PM

•Every time...
Swing direction changes.
When changing the air for vertical
direction, release the left side at
the desired position.
(
PiPi
at the lower limit).
When changing the air for
horizontal direction, release
the right side at the desired
position.
(
PiPi
sounds at the front).
Setting for air flow Page 17, 18
•Comfort air direction can be selected as a Direct air flow, Indirect air flow, Wide air flow and
Spot air flow.
Air volume, Fix and Swing
Movement of vertical air
direction louvers
The louvers reverse
in this range.
Means
the range of
movement.
•Every time...
When pressed during Auto, Cooling, Fan only and PURE.
When changing the air volume, press FAN
FAN
•When the air volume is set to “Quiet ( )”, the air volume becomes “Automatic”.
When changing the air direction, press FIX
•Every time when pressed, the vertical and horizontal louver modes change one step.
•Do not move the air direction louvers by hand but be sure to adjust using the remote controller.
FIX FIX
When swing, press Swing
•When changing the middle vertical direction louver, press the FIX button and to change the middle
horizontal direction louver, press the FIX button again. To know the air direction easily, release the
Swing functions.
SWING
Horizontal
(Left-Right)
Swing
Vertical
(Up-Down)
Swing
Up-Down
Left-Right
Swing
Swing
off
Pi Pi PiPi
ON OFF SET CLR
MODE SWING FAN
AIR FLOW
FIX FIX
ECO
Hi POWER
PURE
COMFORT
SLEEP
POWER-SEL
CLOCK CHECK FILTER RESET
TEMP.
PRESET
POWER SEL
˚C
When PiPi sounds,
it indicates the operation setting returns to the original
setting. Page 7
16
1110650159_(11-20)_EN.indd 16
1110650159_(11-20)_EN.indd 16
2/28/11 2:10 PM
2/28/11 2:10 PM

Comfort air flow
Direct air flow : Blow air toward people.
Indirect air flow : Blow air away from people.
•If Direct air flow or Indirect is selected, the human search sensor moves left and right. It detects the location of people (heat generated) and the air direction (left
and right) is adjusted automatically.
Blows air!
Air does
not blow
directly!
Direct air flow Indirect air flow
Notes
•It may take some time until the air direction changes after setting Direct air flow or Indirect air flow.
•If the air direction does not change to the desired direction for automatic Direct air flow or Indirect air flow, adjust to the desired direction using the
FIX FIX button.
•Depending on the layout of the room, an incomplete operation may occur. In such case, adjust to the desired direction with the FIX FIX button.
•It may sense “No people” in the following cases.
• The people do not move.
• Movement is limited or less such as kid.
• When turning the back.
• When skin exposure is reduced.
• The movement of people is behind the furniture.
• When the room temperature is high.
•Higher temperature objects such as a heater or small animals such as dogs or cats may be sensed as people.
Wide air flow : The air is blown all around the room.
Spot air flow : Air flow is concentrated at one point.
Wide air flow Spot air flow
It is cool
throughout
the room!
It is cool
only near
the sofa!
17
1110650159_(11-20)_EN.indd 17
1110650159_(11-20)_EN.indd 17
2/28/11 2:10 PM
2/28/11 2:10 PM

Comfortable air flow and Direct air flow
or Indirect air flow can be selected from
Wide air flow, spot air flow
AIR FLOW
While operating (Auto, Cool, Dry and these mode with PURE), Select
•Every time...
When pressed, the air flow direction changes.
•The air volume operates in “Automatic” mode.
•Every pressing Indoor unit sounds “Pi” as receiving tone except “PiPi” when AIR FLOW is canceled.
When adjusting the air direction slightly
•Adjust “Air direction” with the FIX FIX button. To know the air direction easily,
release the swing function. Page 16
•When the FIX FIX or SWING button is pressed and when Direct air flow or
Indirect air flow is selected, the AIR FLOW operation is released.
AIR FLOW
Spot left
Cancel Air
Flow
Spot right Spot
center
Wide left
Direct
air flow
Indirect
air flow
Wide
center
Wide right
ON OFF SET CLR
MODE SWING FAN
AIR FLOW
FIX FIX
ECO
Hi POWER
PURE
COMFORT
SLEEP
POWER-SEL
CLOCK CHECK FILTER RESET
TEMP.
PRESET
POWER SEL
˚C
FIX FIX
Notes
•When Direct air flow or Indirect air flow is selected during swing operation, the swing is released.
•Horizontal and vertical air flow direction louvers change depending on the selection of wide air flow or spot air flow.
•When the FAN button is pressed during the cooling or dry operation, the air flow operation is released.
•If the operation is stopped during the comfort air flow operation, the same conditions apply to the next function selected.
•
AIR FLOW
does not operate if only the Picoion air purifier function is working.
•Horizontal direction louvers can be adjusted within a range of approx. 30 degrees when wide air flow or spot air flow is selected.
18
1110650159_(11-20)_EN.indd 18
1110650159_(11-20)_EN.indd 18
2/28/11 2:10 PM
2/28/11 2:10 PM

Comfort sleep
Timer operation
The operation stops automatically at the pre-set time
When 1, 3, 5 and 9 hours are selected, it becomes the comfort
sleep operation.
The set temperature will be automatically adjusted appropriately.
However, the temperature is raised to no more than 2 degree Celsius.
•Every time when pressed (within 3 seconds)...
※Display example is when 10:00 in the evening (22:00 hours) is selected.
Display brightness of indoor unit is reduced during comfort sleep operation.
Timer off During comfort sleep
•The time for stopping the operation is displayed on the remote controller.
•After the operation stops, only automatic filter cleaning functions but drying of the inside is not
performed.
•Comfort sleep operation cannot be set up when Picoion air purifier functions are operating
independently.
Cancel
comfort sleep
To cancel
※The timer setting is released but operation
continues. or
CLR
COMFORT
SLEEP
COMFORT
SLEEP
ON OFF SET CLR
MODE SWING FAN
AIR FLOW
FIX FIX
ECO
Hi POWER
PURE
COMFORT
SLEEP
POWER-SEL
CLOCK CHECK FILTER RESET
TEMP.
PRESET
POWER SEL
˚C
(Blue) (Orange)
TIMER : Orange light
illuminates
OPERATION : Green light
illuminates
19
1110650159_(11-20)_EN.indd 19
1110650159_(11-20)_EN.indd 19
2/28/11 2:10 PM
2/28/11 2:10 PM

Timer on, Timer off
Start and stop of operation is selected with the time. Operate after setting the current time on the remote
controller. Page 9
1For timer on ON For timer off OFF
2Adjust the time to the starting (stopping) time.
Forward
Backward
TEMP.
•Changes by 10 minutes when pressed once and by 1 hour when pressed
continuously.
•The selected time is displayed
Go to 3if the same time as a previous setting can be used.
3Select SET
•During timer off, automatic filter cleaning operation starts after the operation stops at
the selected time. Drying inside is not performed.
•Automatic cleaning is not performed after air conditioner stops in case of Off/On timer
is set.
•Timer off can be selected with the previous operation setting even while stopped.
The operation starts when selected.
1
2Select operation start for 6:00 AM.
Forward
Backward
TEMP.
Selected time and current operating mode
blink alternately in the pictographic
character display portion.
3
4
5Set the stop time to 10:00 AM.
Forward
Backward
TEMP.
Selected time and current operating mode
blink alternately in the pictographic
character display portion.
6
Example of setting
(Selection of timer On/Off)
To start at 6:00 AM and
stop at 10:00 AM.
To cancel
※To change the selected time, press ON or OFF to
change the setting.
Daily timer
1Press ON for Timer on setting.
2Press
TEMP.
for select desired Starting time.
3Press OFF for Timer off setting.
4Press
TEMP.
for select desired Stopping time.
5Press SET or will blink.
6During or blink, press SET agian and display will show .
•Daily timer setting is canceled when the Comfort sleep
COMFORT
SLEEP
is set.
•Daily timer setting is canceled when Start and Stop button is pressed.
•After operation stops, only automatic filter cleaning functions but drying of inside is not performed.
CLR
ON
SET
OFF
SET
20
1110650159_(11-20)_EN.indd 20
1110650159_(11-20)_EN.indd 20
2/28/11 2:10 PM
2/28/11 2:10 PM