Toshiba RAS-25PKVPG-ND User manual

1121450101
•Thank you for purchasing the Toshiba room air conditioner.
•To use the product safely and correctly, please read this manual carefully before use.
•Please keep this manual in a convenient location for future reference.
Toshiba air conditioner
Owner’s Manual
Indoor unit
RAS-25PKVPG-ND
RAS-35PKVPG-ND
Outdoor unit
RAS-25PAVPG-ND
RAS-35PAVPG-ND
SVENSKA SUOMI NORSK DANSKENGLISH
1121450101_(cover)_5 Langes.indd C11121450101_(cover)_5 Langes.indd C1 7/17/17 10:10 AM7/17/17 10:10 AM

Contents Safety Precautions page 4
Follow These Instructions Carefully.................................................................... 4
Parts page 7
Indoor unit........................................................................................................................... 7
Outdoor unit....................................................................................................................... 8
Accessories (Attaching and detaching remote control holder)................... 8
Remote control................................................................................................................ 9
Preparation before operating
the air conditioner page 11
Insert the battery............................................................................................................. 11
Setting the clock ............................................................................................................. 11
Check transmitting and receiving ......................................................................... 12
Automatic operation page 13
Cooling, Heating, Dry operation and
Fan only operation
page 14
Plasma purifier page 16
Air volume, Air direction and
Swing louvers page 17
Changing the air volume............................................................................................ 17
Changing the air direction......................................................................................... 17
Swing louvers operation............................................................................................. 17
Movement of vertical air direction louvers....................................................... 17
Comfort air flow page 18
Wide air flow, Spot air flow....................................................................................... 18
Timer operation page 19
Comfort sleep................................................................................................................... 19
Timer on, Timer off........................................................................................................ 20
2
1121450101_EN SV FI NO DK.indb 21121450101_EN SV FI NO DK.indb 2 7/17/17 11:01 AM7/17/17 11:01 AM

When indoor unit lamp blinks page 38
Auto Restart Setting page 39
Special points to consider page 40
If the remote control is not available................................................................... 40
In the event 2 air conditioners are installed in close proximity............ 40
Concern about the operating noise..................................................................... 40
These are not failures page 41
Operation and behavior of the air conditioner............................................... 41
Appearance of vapor or condensation .............................................................. 41
Odor or dirt......................................................................................................................... 41
Operation lamp................................................................................................................ 42
Remote control operation.......................................................................................... 42
If a noise is heard........................................................................................................... 42
Weekly timer operation page 21
Examples of WEEKLY TIMER uses................................................................... 21
How to set WEEKLY TIMER................................................................................... 22
Edit Weekly timer program....................................................................................... 24
Deactivating WEEKLY TIMER operation......................................................... 24
To delete programs....................................................................................................... 25
WEEKLY TIMER usage example page 26
Set preferred operation page 30
PRESET operation........................................................................................................ 30
Energy Saving page 31
ECO operation................................................................................................................. 31
Limit maximum : Electric Power
consumption and Silent Operation
(Outdoor Unit)
page 32
Power-Selection.............................................................................................................. 32
Silent operation ............................................................................................................... 32
Power-Selection and Silent Operation (Outdoor Unit)............................. 32
Fireplace and 8°C Operation page 33
Fireplace Operation...................................................................................................... 33
8°C Heating Operation (8°C) .................................................................................. 33
Fireplace and 8°C Operation................................................................................... 33
Operation of display lamp
brightness adjustment page 34
Inside drying operation page 35
Care and cleaning page 36
Inspect air conditioner regularly to ensure efficient operation............. 36
Not in use for an extended period........................................................................ 37
Re-starting after extended off period.................................................................. 37
Regular check.................................................................................................................. 37
3
EN
ES
FR
IT
DE
CR
CZ
NL
1121450101_EN SV FI NO DK.indb 31121450101_EN SV FI NO DK.indb 3 7/17/17 5:58 PM7/17/17 5:58 PM

Safety
Precautions
Follow These Instructions Carefully
• During a malfunction, (such as a burning
odor or not cooling), stop operating the unit
and turn off the circuit breaker. Continuous
operation may be a cause of fire, or electric
shock. Please request repair or service from
the supplying retail dealership or a Toshiba
dealership.
• Grounding should be requested from the
supplying retail dealership or professional
vendors. Insufficient grounding work may be
the cause of electric shock. Do not connect
the earth wire to a gas pipe, water pipe,
lightning conductor, or telephone earth wire.
• If the indoor unit piping outlet is exposed
due to relocation, close the opening.
Touching internal electrical parts may cause
injury or electric shock.
• Do not insert any material (metal, paper, or
water, etc.) into the air outlet or air intake
opening. There are high voltage sections
or a fan operating at high speed which may
cause an injury or electric shock.
• You must use an independent power outlet
for the power supply. If a power outlet other
than the independent outlet is used, it may
cause a fire.
• When the air-conditioning unit does not
cool or not warm there may be a leakage
of refrigerant. Please consult the supplying
retail dealership. The refrigerant used in
the air-conditioning unit is safe. It will not
leak under normal operating conditions but
if it leaks into the room and contacts a heat
source such as a heater, or stove, it may
cause a harmful reaction.
• When water or other foreign substances
enter the internal parts, stop operating the
unit immediately and turn off the circuit
breaker. Operating the unit continuously
may cause fire or electric shock. Please
contact the supplying retail dealership for
repair.
• Do not clean the inside of the air-
conditioning unit yourself. Please request
internal cleaning of the air-conditioning
unit from the supplying retail dealership.
Incorrect cleaning may cause breakage of
resin parts or insulation defects of electrical
parts, causing water leakage, electric shock
or fire.
DANGER
• Do not install, repair, open or remove the
cover. It may expose you to dangerous
voltages. Ask the dealership or the
specialist to do this.
• Turning off the power supply will not prevent
potential electric shock.
• The appliance shall be installed in
accordance with national wiring regulations.
• There must be incorporated in the fixed
wiring and the means of disconnecting a
contact separation of at least 3 mm in all
poles.
WARNING
• Do not expose your body directly to cool or
warm air for a long time.
• Do not insert your finger or any article into
the air inlet/outlet.
• When an abnormality (burning smell, etc.)
occurs, stop the air conditioner and turn off
the circuit breaker.
• Installation must be requested from the
supplying retail dealership or professional
installation vendors. Installation requires
special knowledge and skill. Customer
installation can cause fire, electric shock,
injury or water leakage.
• Do not select a location for installation
where flammable gas may leak. If there is
any gas leakage or accumulation around
the unit, it can be a cause of fire.
• Do not turn ON/OFF the circuit breaker or
operate buttons with a wet hand. It may be
a cause of electric shock.
• Do not disassemble, modify or relocate the
unit by yourself. It may become the cause
of fire, electric shock, or water leakage. For
repair or relocation, please request service
from the supplying retail dealership or a
Toshiba dealership.
• Do not select a location for installation
where there may be excessive water or
humidity, such as a bathroom. Deterioration
of insulation may be a cause of electric
shock or fire.
• When relocating or repairing the unit, please
contact the supplying retail dealership. A
kink in the wiring may cause electric shock
or fire.
4
1121450101_EN SV FI NO DK.indb 41121450101_EN SV FI NO DK.indb 4 7/17/17 5:58 PM7/17/17 5:58 PM

• Do not damage or modify the power cable.
Do not connect the cable midway, or use a
multiple outlet extension cord that is shared
by other devices. Failure to observe this
precaution may cause a fire.
• Do not place heavy objects on the power
cable, expose it to heat, or pull it. Doing so
may cause electrical shock or fire.
• This appliance can be used by children
aged from 8 years and above and
persons with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning use of
the appliance in a safe way and understand
the hazards involved. Children shall not
play with the appliance. Cleaning and user
maintenance shall not be made by children
without supervision.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
intruction concerning use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure
that they do not play with the appliance.
• Do not use any refrigerant different from the
one specified for top-ups or replacement as
abnormally high pressure, etc.
Otherwise, abnormally high pressure may
be generated in the refrigeration cycle,
which may result in a failure or explosion of
the product or an injury to your body.
CAUTION
• Check that the circuit breaker is installed
correctly. If the circuit breaker is not
properly installed, it may cause an electric
shock. To check the installation method,
please contact the supplying retail
dealership or the professional vendor who
installed the unit.
• When using the unit in a closed room, or
operating with other combustion appliances,
make sure to open a window occasionally
for ventilation. Insufficient ventilation may
cause suffocation due to a lack of oxygen.
• Avoid operating for long periods in a high
humidity environment (over 80%) such as
with the windows or doors open. There may
be condensation on the indoor unit and
droplets may fall onto the furniture.
• When the unit won’t be used for a long
time, turn off the main switch or the circuit
breaker.
• It is recommended that maintenance be
performed by a specialist when the unit has
been operated for a long time.
• At least once a year check if the mounting
table of the outdoor unit is damaged or not.
If a damaged state is ignored, the unit may
fall or over-turn, causing an injury.
• Stand on a sturdy ladder when attaching/
detaching the front panel/air filter. Failure to
do so may cause a fall or injury.
• Do not stand on the outdoor unit or place
anything on the unit. It may be the cause
of injury due to falling or over-turning. Any
damage to the unit may cause an electric
shock or fire.
• Do not use combustion appliances in
the direct flow of the air from the
air-conditioning unit. Poor combustion
of a combustion appliance may cause
suffocation.
• Do not place anything around the outdoor
unit or allow fallen leaves to accumulate
around it. If there are fallen leaves, small
animals could enter and contact internal
electrical parts, causing a failure or fire.
• Do not place animals and plants in places
where wind from the air-conditioning unit
flows directly. It may have a negative
influence on the animal or plant.
• Ensure that drained water is discharged.
When the discharging water process is not
sufficient, water may leak, causing water
damage to furniture. To check that the
installation method used is correct, please
contact the supplying retail dealership or the
professional vendor who installed the unit.
• Do not place any containers such as a
vase containing fluid on the unit. It might
cause water to enter the unit and damage
the electrical insulation, causing an electric
shock.
5
EN
ES
FR
IT
DE
CR
CZ
NL
1121450101_EN SV FI NO DK.indb 51121450101_EN SV FI NO DK.indb 5 7/17/17 5:58 PM7/17/17 5:58 PM

• Do not use for special applications such
as storage of food or animals, or to display
plants, precision devices, or art objects. Do
not use on ships or in other vehicles. It may
cause a failure in the air-conditioning unit. In
addition, it may damage these items.
• Do not place other electrical appliances
or furniture under the unit. Water droplets
might fall, causing damage or failure.
• When cleaning, you must stop operating
the unit and turn off the circuit breaker.
Since the fan inside may be rotating at high
speed, it may cause an injury.
• Do not wash the main air-conditioning unit
with water. It may cause an electric shock.
• After the front panel/air filter is cleaned,
wipe away any water and allow to dry. If
water remains, it may cause an electric
shock.
• Once the front panel is removed, do not
touch the metal parts of the unit. It may
cause an injury.
• Do not touch the air intake section or the
aluminum fins of the unit. It may cause
injury.
• When you hear thunder and there might
be a lightning strike, stop operating the
unit and disconnect the circuit breaker. If
lightning strikes, it may cause a failure.
• The manufacturer shall not assume any
liability for damage caused by not observing
the safety information in this manual.
• Batteries for remote control unit:
- Should be inserted with correct polarity
(+) and (-).
- Should not be recharged.
- Do not use batteries for which the
“Recommended usage period” has
expired.
- Do not keep used batteries inside the
remote control unit.
- Do not mix different types of batteries, or
mix new batteries with old ones.
- Do not directly solder the batteries.
- Do not short-circuit, disassemble, heat, or
throw batteries into a fire. If batteries are
not disposed of correctly, they may burst
or be the cause of fluid leakage, resulting
in burns or injuries. If touching the fluid,
wash thoroughly with water. If it touches
devices, wipe off to avoid direct contact.
- Do not place within reach of small
children. If a battery is swallowed, consult
a doctor immediately.
• The manufacturer shall not assume any
liability for damage caused by not observing
the safety information in this manual.
6
1121450101_EN SV FI NO DK.indb 61121450101_EN SV FI NO DK.indb 6 7/17/17 5:58 PM7/17/17 5:58 PM

When the front panel is opened
Parts
Air inlet
Front panel
Operation display
Remote control receiving
module
Vertical wind direction louver
Horizontal wind direction louver
Air outlet
Air filter
Plasma ion charger (Air purifier)
Temperature sensor
Temporary switch
Indoor unit
7
EN
ES
FR
IT
DE
CR
CZ
NL
1121450101_EN SV FI NO DK.indb 71121450101_EN SV FI NO DK.indb 7 7/17/17 5:58 PM7/17/17 5:58 PM

Remote control
receiving module
Temporary switch
Outdoor unit Accessories
Air outlet
Drain outlet
(Bottom)
Piping and cable
Drain pipe
(Drain hose)
Air inlet
(Back and
lateral sides)
“Timer” lamp
“Plasma purifier” lamp
Operation mode lamp
“Cool” (Blue)
“Heat” (Orange)
Remote control Remote control holder
Dry batteries (2 pieces)
AAA alkaline dry batteries Attachment screws for remote control holder
(2 pieces)
How to attach the remote control holder
Attach the remote control holder to a wall or a column with the
supplied attachment screws for the remote control holder.
Remote control holder
Screws to attach
remote control
holder
How to attach / detach from the remote
control holder
Insert the “stick out” of the remote control
holder into the hole of the lower remote
control and set it while pressing toward the
direction of arrow.
Detach it by reversing the procedure.
Hole
Stick out
8
1121450101_EN SV FI NO DK.indb 81121450101_EN SV FI NO DK.indb 8 7/17/17 5:58 PM7/17/17 5:58 PM

Cover
Parts (continued)
Remote control
Transmitting part
Memory and recall user
setting operation
Start and Stop
operation
Kind of receiving tone
When the indoor unit receives a signal from the
remote control, the receiving tone sounds.
..........Operation, change
..........Stop
..........Notice
When the notice sounds, it means the
operating setting returns to the datum point.
(Example) When temperature setting.
Datum points
Adjust temperature
How to open the remote control
cover
Pull it down while slightly depressing the upper part
of the cover.
22°C 23°C 24°C 25°C 26°C
Pi Pi Pi Pi
PiPi
Pi
PiPi
PiPi
Pi
Temperature 24°C Swing Cancel
Air volume Automatic Horizontal
wind direction Straight
Air flow Cancel Vertical wind
direction Lower limit
9
EN
ES
FR
IT
DE
CR
CZ
NL
1121450101_EN SV FI NO DK.indb 91121450101_EN SV FI NO DK.indb 9 7/17/17 5:58 PM7/17/17 5:58 PM

Remote control on full display
Notes
All indicators are shown for explanation.
•
Do not drop and avoid contact with water.
•
Do not place where temperature rises or falls (For example exposed to direct sunlight, near a stove, on the TV, hot floor or near a window).
•
When other electrical appliances are operated by a remote control, etc., isolate the appliances or consult the distributor.
•
If a fluorescent lamp is used near the indoor unit, the remote signal may not reach the infrared signal receiver and, thus, affect the air conditioner
ON/OFF operation.
•
Do not insert a needle or bar into the opening.
10
B mode display
Signal sending display
Weekly timer display
Clock and timer setting display
Quiet speed display
Mode selection button
Air flow selection button
ECO operation button
Plasma purifier button
Fireplace/8°C heating operation button
Clock setting button
Check button
Louver swing button
Fan speed selection button
Louver direction selection button
Hi-POWER operation button
Weekly timer setting button
Reset button
Filter clear button
Mode selection display
Power selection display
Air purifying
Preset operation display
Setting temperature display Temperature unit select
Fan speed selection display
Hi-POWER operation display
Check mode display
Silent operation (Outdoor unit) display
Comfort sleep display
Fireplace display
Air flow direction display
ECO operation display
Power selection/Silent operation
(Outdoor unit) button
Comfort sleep button
1121450101_EN SV FI NO DK.indb 101121450101_EN SV FI NO DK.indb 10 7/17/17 5:58 PM7/17/17 5:58 PM

Remote control
Preparation before operating the
air conditioner
Insert the battery
Remove the cover
and insert AAA
alkaline dry batteries
1
Insert direction of
(+) and (-) correctly
Pull the cover to
your side firmly
Press the CLOCK button
•
Adjust the clock by using the
“setting the clock” button
2
Press with the tip of pencil.
Attach the cover
3
Notes
•
The life of dry batteries is approx. 1 year in normal use.
•Replace batteries if no sound is received from the indoor unit or there is a failure to select the desired function.
•Replace both batteries at the same time with AAA alkaline batteries.
•If not planning to use for one or more months,
remove the batteries to avoid failure.
Setting the clock
1Press the CLOCK button
Press with the tip of pencil.
2Adjust the “Day”
•
The day “SU” will appear and change to the next
day after pressing the button once.
3Adjust the “Time”
or
•
The time changes by 1 minute when pressed
once. The time changes by ten-minute intervals
when pressed continuously.
4Confirm “Time”
Pull the cover
away firmly.
11
EN
ES
FR
IT
DE
CR
CZ
NL
1121450101_EN SV FI NO DK.indb 111121450101_EN SV FI NO DK.indb 11 7/17/17 5:58 PM7/17/17 5:58 PM

Indoor unit
Turn on the main power supply
•
A waiting period of 3 minutes is required after the power is turned on. During this period, the operation lamp will illuminate. However, the compressor
will not start.
Check transmitting and receiving
Notes
•
Use the remote control where the indoor unit can receive the signal. It does not work if the signal is obstructed by curtains or sliding doors.
•
The distance for transmitting and receiving is shorter if a bright light, such as sunlight, affects of the main unit.
•
The distance for transmission and receiving is shorter if the remote control is operated at an oblique angle to the main unit.
Point the remote control at the remote control receiving module on the indoor unit.
•
The correct signal is confirmed by the receiving tone and the operation lamp will illuminate.
•
When button is pressed, the receiving tone will sound and the operation will stop.
The receiving and
transmitting distance.
Approx. 7m from straight in
front of the indoor unit.
•
Check that the signal is transmitted and received at the installed position if the remote control is fixed to the remote control holder.
12
1121450101_EN SV FI NO DK.indb 121121450101_EN SV FI NO DK.indb 12 7/17/17 5:58 PM7/17/17 5:58 PM

Automatic operation
The air conditioner selects the cooling or heating operation.
When starting automatic operation, select A
•
The air volume is “Automatic” only.
When changing the temperature TEMPERATURE
•
Changes by 1°C when pressed
once. It changes continuously if
pressed continuously.
•
The temperature range available
is 17°C - 30°C.
PiPi
sounds when reaching 24°C.
Higher
Lower
When it stops.
•
After stopping, inside drying operation starts.
(Timer lamp is on)
※When operating period is less than 10 minutes,
the operation is not performed.
When PiPi sounds,
it notices that the operation setting returns to the datum
point. Page 9
Timer lamp
Operation mode
Cooling/Dry : Blue light illuminates
Heating : Orange light illuminates
13
EN
ES
FR
IT
DE
CR
CZ
NL
1121450101_EN SV FI NO DK.indb 131121450101_EN SV FI NO DK.indb 13 7/17/17 5:58 PM7/17/17 5:58 PM

Temperature and air volume for the cooling and heating operation can be set as you
prefer. Only air volume can be set if 8°C heating operation is selected.
When PiPi sounds,
it notices the operation setting returns to the datum point.
Page 9
Cooling, Heating, Dry operation and
Fan only operation
Cooling &
Heating
Defrosting operation while heating
This is not unusual
Frost may cover the heat exchanger of the outdoor unit during the
heating operation. To prevent performance impairment, defrosting
operates automatically. At this time, warm air from the indoor unit
may stop, or water or steam may appear from the outdoor unit.
However, these features are not unusual. Defrosting function may
start immediately after the operation stops.
Steam
Water
Cooling
operation
Dry operation
Heating
operation
Fan only
operation
Timer lamp
Operation mode
Cooling/Dry : Blue light illuminates
Heating : Orange light illuminates
14
1121450101_EN SV FI NO DK.indb 141121450101_EN SV FI NO DK.indb 14 7/17/17 5:58 PM7/17/17 5:58 PM

For dehumidification, a moderate cooling performance is controlled automatically.
Dry
operation
When changing the temperature
•
The temperature changes by 1°C when pressed. It changes
continuously when pressed continuously.
•
The available setting range is 17°C – 30°C.
When at 24°C
PiPi
When stopping
•
Inside drying starts after the operation stops.
(TIMER lamp turns on)
※Inside drying lamp will not operate if the
operating time is 10 minutes or less.
Notes
•
Refrigerant flow may make noise. However, this is not defect.
•
When the outside temperature is low, the temperature in the room may become lower than the temperature selected.
•
On dry mode the air volume is set to Auto only.
Up
Down
15
EN
ES
FR
IT
DE
CR
CZ
NL
1121450101_EN SV FI NO DK.indb 151121450101_EN SV FI NO DK.indb 15 7/17/17 5:58 PM7/17/17 5:58 PM

Plasma purifier
Capture efficiency of floating impurities in the air is accelerated by plasma ion charger. They are
caught by the air conditioner and eliminated with the drain water. Thus, the air discharged by the
air conditioner is kept clean.
When stopping operation.
•
After stopping, automatic cleaning starts
(TIMER lamp turns on).
※When operating time is 10 minutes
or less, cleaning function does not
operate.
or
When using together with the air conditioning
Air volume and direction setting of air conditioner have priority.
Operate Plasma purifier while air
conditioning.
Operate air conditioning during
Plasma purifier.
Stop both Plasma purifier and
air conditioning.
Stop only Plasma purifier.
Press the button.
Press to select.
Press the button.
Press the button.
OperationStop
Notes
•
Plasma purifier operation does not remove harmful substances from cigarette smoke
(carbon monoxide etc.). Open a window occasionally for ventilation.
To clean the air,
Plasma purifier
Plasma purifier lamp
illuminates
16
1121450101_EN SV FI NO DK.indb 161121450101_EN SV FI NO DK.indb 16 7/17/17 5:58 PM7/17/17 5:58 PM

•
Every time...
Pi Pi PiPi
Horizontal
(Left-Right)
Swing
Vertical
(Up-Down)
Swing
Up-Down
Left-Right
Swing
Swing
off
Swing direction changes.
When changing the air to the
vertical direction, release the
left side at the desired position.
(
PiPi
at the lower limit).
When changing the air to the
horizontal position, release
the right side at the desired
position.
(
PiPi
sounds at the front).
Setting for air flow Page 18
•
Comfort air direction can be selected as a Wide air flow and Spot air flow.
Air volume, Air direction and
Swing louvers
Movement of vertical air
direction louvers
•
Every time...
When pressed during Auto, Cooling, Fan only and PURE.
Changing the air volume, press FAN
•
When the air volume is set to “Quiet ( )”, the air volume becomes “Automatic”.
Changing the air direction, press FIX
•
When pressed the vertical and horizontal louver modes change one step.
•
Do not move the air direction louvers by hand adjust only with the remote control.
Swing louvers operation, press Swing
•
When changing the middle vertical direction louver, press the button and to change the middle
horizontal direction louver, press the button again. To see current air direction, release the
swing functions.
When PiPi sounds,
it indicates the operation setting returns to the original
setting. Page 9
Cooling operation (Default setting)
Heating operation (Default setting)
Louver for
air flow direction
up and down
Louver for
air flow
direction up
and down
The shows
the range of air
flow direction
operation.
The range of
swing operation.
17
EN
ES
FR
IT
DE
CR
CZ
NL
1121450101_EN SV FI NO DK.indb 171121450101_EN SV FI NO DK.indb 17 7/17/17 5:58 PM7/17/17 5:58 PM

Comfort air flow
Wide air flow : Air flows around the room.
Spot air flow : Air flow is concentrated at one point.
Wide air flow Spot air flow
It is cool
throughout
the room!
It is cool
only near
the sofa!
Comfortable air flow can be selected from AIR FLOW
Notes
•
Horizontal and vertical air flow direction louvers change depending on the selection of wide air flow or spot air flow.
•
If the operation is stopped during the comfort air flow operation, the same conditions apply to the next function selected.
• does not operate if only the Plasma purifier function is working.
•
Horizontal direction louvers can be adjusted within a range of approx. 30 degrees when wide air flow or spot air flow is selected.
While operating (Auto, Cool, Heat, Dry and these modes with PURE), Select
•
Every time...
When pressed, the air flow direction changes.
Spot left
Cancel Air
Flow
Spot right Spot
center
Wide left
Wide
center Wide right
•
Pressing Indoor unit causes “Pi” sound (receiving tone) and “PiPi” sound when AIR FLOW is canceled.
When adjusting the air direction slightly
•
Adjust “Air flow direction” with the button.To know the air direction easily,
release the swing function. Page 17
•
When the or button is pressed and when Wide air flow or spot
air flow is selected, the Air flow direction is released.
18
1121450101_EN SV FI NO DK.indb 181121450101_EN SV FI NO DK.indb 18 7/17/17 5:58 PM7/17/17 5:58 PM

Comfort sleep
Timer operation
The operation stops automatically at the Pre-set time.
When 1, 3, 5 and 9 hours are selected, the comfort sleep operation
begins.
The set temperature will be automatically adjusted appropriately.
However, the temperature is raised or decreased to no more than
2 degrees Celsius.
•
Every time when pressed (within 3 seconds)...
※Display example is when 10:00 in the evening (22:00 hours) is selected.
Cancel
comfort sleep
Timer off during comfort sleep
•
The time for stopping the operation is displayed on the remote control.
•
After the operation stops, drying of the inside is not performed.
•
Comfort sleep operation cannot be set up when Plasma purifier functions are operating
independently.
To cancel
※The timer setting is released but operation
continues. or
Timer lamp illuminates
19
EN
ES
FR
IT
DE
CR
CZ
NL
1121450101_EN SV FI NO DK.indb 191121450101_EN SV FI NO DK.indb 19 7/17/17 5:58 PM7/17/17 5:58 PM

Timer on, Timer off
Start and stop of operation is selected with the time. Operate after setting the current time on the remote
control Page 11
Example of setting
(Selection of timer On/Off)
To start at 6:00 AM and
stop at 10:00 AM.
To cancel
※The timer setting is released, but the operation will continue.
1For timer on For timer off
•
Changes by 10 minutes when pressed once and by 1 hour when pressed
continuously.
•
The selected time is displayed
Go to 2if the same time as a previous setting can be used.
2Select
•
During time off, drying inside is not performed.
•
Timer off can be selected with the previous operation setting even while stopped.
The operation starts when selected.
•
To change the selected time, press or to change the setting.
1Select operation start for 6:00 AM.
Forward
Backward
Selected time and current operating mode
blink alternately in the pictographic
character display portion.
2Set the stop time to 10:00 AM.
Forward
Backward
Selected time and current operating mode
blink alternately in the pictographic
character display portion.
3
20
1121450101_EN SV FI NO DK.indb 201121450101_EN SV FI NO DK.indb 20 7/17/17 5:58 PM7/17/17 5:58 PM