Toshiba RAS-B10UFV User manual

Toshiba 1112150201 (CVF)
Indoor unit
RAS-(B) 10, 13, 18UFV Series
Outdoor unit
RAS-10, 13, 18SAV Series
RAS-M14GAV-E
RAS-M18GAV-E
RAS-3M18SAV-E
RAS-3M26GAV-E1
RAS-4M23SAV-E
RAS-4M27GAV-E1
RAS-5M34UAV-E
AIR CONDITIONER (SPLIT TYPE)
INSTALLATION MANUAL
ENGLISH
ESPAÑOL
FRANÇAIS
ITALIANO
DEUTSCH
PORTUGUÊS
POLSKI
ČESKY
PУCСКИЙ
HRVATSKI
MAGYAR
TÜRKÇE
NEDERLANDS
ΕΛΛΗΝΙΚΑ
SVENSKA
SUOMI
NORSK
DANSK
ROMÂNĂ
БЪЛГАРСКИ
EESTI
LATVISKI
SLOVENČINA
SLOVENŠČINA

SOMMAIRE
FR
MESURES DE SÉCURITÉ...........................................................1
PLAN D’INSTALLATION DES UNITÉS INTÉRIEURE ET
EXTÉRIEURE...............................................................................3
nPièces d’Installation en Option ...............................................3
UNITÉ INTÉRIEURE....................................................................4
nEndroit d’Installation................................................................4
nOuverture du Trou et Montage de la Plaque d’Installation .....4
nInstallation de l’unité intérieure................................................5
nInstallation Dissimulée.............................................................6
UNITÉ EXTÉRIEURE...................................................................7
nEndroit d’Installation................................................................7
nPrécautions à Prendre pour l’Installation dans les Régions
Sujettes aux Chutes de Neige et aux Températures
Froides ....................................................................................7
nDrainage de l’eau Dans l’unité Extérieure ...............................7
nConnexion du Tuyau Réfrigérant ............................................7
nEvacuation ..............................................................................8
nConnexion des Câbles ............................................................8
nTravaux Electriques ................................................................8
AUTRES.......................................................................................9
nTest de Fuite Gaz....................................................................9
nRéglage du Sélecteur de Télécommande ...............................9
nSélection de Télécommande A-B............................................9
nOpération du Test ...................................................................9
nRéglage de la Remise en Marche Automatique .....................9
PRECAUCIONES SOBRE SEGURIDAD ....................................1
DIAGRAMA DE INSTALACIÓN DE LA UNIDAD
INTERIOR Y EXTERIOR..............................................................3
nPiezas de Instalación Opcional ..............................................3
UNIDAD INTERIOR .....................................................................4
nLugar de Instalación................................................................4
nCorte de un Orificio y Montaje de la Placa de Instalación ......4
nCómo Instalar la Unidad Interior..............................................5
nInstalación Empotrada.............................................................6
UNIDAD EXTERIOR ....................................................................7
nLugar de Instalación................................................................7
nPrecauciones sobre Instalación en Regiones con Nieve y
Temperaturas Frías.................................................................7
nDrenaje del Agua de la Unidad Exterior ..................................7
nConexión de la Tubería Refrigerante ......................................7
nEvacuación .............................................................................8
nConexión de Cables................................................................8
nTrabajo Eléctrico ....................................................................8
OTROS.........................................................................................9
nComprobación de Fugas.........................................................9
nConfiguración del Interruptor de Selección del Mando
a Distancia...............................................................................9
nMando a Distancia A-B Selección ...........................................9
nPrueba de Operación .............................................................9
nAjuste de Reinicio Automático ................................................9
CONTENIDOS
ES
INDICE
PRECAUZIONI PER LA SICUREZZA.........................................1
SCHEMA DI INSTALLAZIONE DELL’ UNITÀ INTERNA
E DELL’ UNITÀ ESTERNA..........................................................3
nComponenti di Installazione Opzionali ...................................3
UNITÀ INTERNA .........................................................................4
nLuogo per l’Installazione..........................................................4
nApertura di un Foro e Installazione della Lastra di
Installazione ............................................................................4
nCome Installare l’unità Interna.................................................5
nInstallazione Incassata............................................................6
UNITÀ ESTERNA ........................................................................7
nLuogo per l’Installazione..........................................................7
nPrecauzioni sull’Installazione nelle Regioni Soggette a
Nevicate e Basse Temperature...............................................7
nScarico di Acqua dall’unità Esterna.........................................7
nCollegamento dei Tubi del Refrigerante..................................7
nEvacuazione ...........................................................................8
nCollegamento dei Cavi ............................................................8
nLavori Elettrici..........................................................................8
ALTRI...........................................................................................9
nTest per Perdite di Gas ...........................................................9
nImpostazione del Selettore del Telecomando .........................9
nSelezione A-B del Telecomando .............................................9
nFunzionamento di Prova .........................................................9
nImpostazione per la Rimessa in Funzione Automatica ...........9
IT
INHALT
SICHERHEITSVORKEHRUNGEN ..............................................1
EINBAUZEICHNUNGEN FÜR INNEN- UND
AUSSENGERÄT..........................................................................3
nZusätzlich erhältliche Installationsteile ...................................3
INNENGERÄT..............................................................................4
nAufstellungsort.........................................................................4
nMauerdurchbruch und Befestigung der Montageplatte ..........4
nInstallieren des Innengeräts ....................................................5
nVerborgene Montage...............................................................6
AUSSENGERÄT..........................................................................7
nAufstellungsort.........................................................................7
nVorsichtsmaßnahmen beim Einbau in Regionen mit
Schneefall und kalten Temperaturen ......................................7
nAblassen des Wassers aus dem Außengerät .........................7
nAnschluß der Kühlmittelleitungen............................................7
nEntleeren ................................................................................8
nKabelanschlüsse .....................................................................8
nElektrische Anschlüsse ..........................................................8
SONSTIGES.................................................................................9
nÜberprüfung auf Gas-Undichtigkeit .........................................9
nEinstellen des Fernbedienungs-Wahlschalters .......................9
nFernbedienung A-B Wahl........................................................9
nProbelauf.................................................................................9
nAutomatische Wiedereinschaltung ..........................................9
DE
ÍNDICE
PRECAUÇÕES RELATIVAS A SEGURANÇA...........................1
ESQUEMA DE INSTALAÇÃO DAS UNIDADES INTERIOR
E EXTERIOR................................................................................3
nPeças de Instalação Opcionais...............................................3
UNIDADE INTERIOR...................................................................4
nLocal de Instalação .................................................................4
nCortar um Orifício e Montar a Placa de Instalação..................4
nComo Instalar a Unidade Interior ............................................5
nInstalação Oculta.....................................................................6
UNIDADE EXTERIOR..................................................................7
nLocal de Instalação .................................................................7
nPrecauções na Instalação em Regiões com Queda de
Neve e Temperaturas Negativas.............................................7
nDrenar a Água da Unidade Exterior ........................................7
nLigação das Condutas de Refrigeração ..................................7
nPurga de Ar .............................................................................8
nLigações Eléctricas .................................................................8
nTrabalhos de Electricidade......................................................8
OUTROS ......................................................................................9
nTeste de Fugas de Gás...........................................................9
nDefinição do Interruptor do Telecomando ...............................9
nSelecção A-B do Telecomando...............................................9
nExecução do Teste..................................................................9
nDefinindo de Reiniciação Automática......................................9
PT
SPIS TREŚCI
ZASADY BEZPIECZEŃSTWA ....................................................1
SCHEMAT INSTALACYJNY URZĄDZENIA
WEWNĘTRZNEGO I ZEWNĘTRZNEGO ....................................3
nDodatkowe Części Instalacyjne...............................................3
URZĄDZENIE WEWNĘTRZNE ...................................................4
nMiejsce Instalacji .....................................................................4
nWycinanie Otworu oraz Montaż Płyty Instalacyjnej.................4
nInstalacja jednostki wewnętrznej .............................................5
n Instalacja ukryta ......................................................................... 6
URZĄDZENIE ZEWNĘTRZNE ....................................................7
nMiejsce Instalacji .....................................................................7
nZalecenia Dotyczące Instalacji Urządzenia w Rejonach z
Występowaniem Obfitych Opadów Śniegu i Niskich
Temperatur..............................................................................7
nOdprowadzanie wody z Jednostki Zewnętrznej ......................7
nŁączenie Instalacji Rurowej Czynnika Chłodniczego ..............7
nUsuwanie Powietrza................................................................8
nPodłączenie Okablowania .......................................................8
nPrace Elektryczne ...................................................................8
INNE.............................................................................................9
nPróba Gazoszczelności...........................................................9
nUstawianie Przełącznika Wyboru Pilota ..................................9
nUstawienia Przełącznika A-B Wyboru Pilota ...........................9
nPróba Działania.......................................................................9
nWłączanie Funkcji Automatycznego Wznawiania Pracy
(Auto Restart)..........................................................................9
PL
OBSAH
BEZPEČNOSTNÍ OPATŘENÍ......................................................1
SCHÉMA INSTALACE VNITŘNÍ A VENKOVNÍ JEDNOTKY.....3
nVolitelné Doplňky pro Instalaci ................................................3
VNITŘNÍ JEDNOTKA ..................................................................4
nMísto Instalace ........................................................................4
nVyvrtání Otvoru a Montáž Instalační Desky ............................4
nMontáž Vnitřní Jednotky..........................................................5
n Montáž Zapuštěné Jednotky ...................................................... 6
VENKOVNÍ JEDNOTKA..............................................................7
nMísto Instalace ........................................................................7
nPokyny pro Instalaci v Oblastech, kde Padá Sníh a Jsou
Nízké Teploty ..........................................................................7
nVypouštění Vody z Venkovní Jednotky ...................................7
nSpojování Chladivového Potrubí .............................................7
nVyčerpávání Vzduchu .............................................................8
nZapojení Vodičů ......................................................................8
nElektrické Práce ......................................................................8
OSTATNĺ......................................................................................9
nZkouška Úniku Plynu...............................................................9
nNastavení Přepínače Dálkového Ovládání .............................9
nVolba A-B na Dálkovém Ovládání...........................................9
nZkušební Provoz .....................................................................9
nNastavení Automatického Znovuspuštění...............................9
CZ
СОДЕРЖАНИЕ
MEPЫ БEЗOПACHOCTИ...........................................................1
СХЕМА УСТАНОВКИ ВНУТРЕННЕГО И НАРУЖНОГО
БЛОКОВ......................................................................................3
nOпционaльныe Уcтaновочныe Чacти...................................3
BHУTPEHHИЙ БЛOК.................................................................4
nMecто Уcтaновки...................................................................4
nПpоpeзaниe Отвepcтия и Монтaж Уcтaновочной
Плacтины................................................................................4
nУстановка внутреннего блока .............................................5
nСкрытая установка ...............................................................6
HAPУЖHЫЙ БЛOК....................................................................7
nMecто Уcтaновки...................................................................7
nМеры предосторожности при установке в регионах с
вероятностью снегопада и низкими температурами.........7
nСлив воды из внешнего блока.............................................7
nПодcоeдинeниe Tpyбопpоводa для Xлaдaгeнтa ................7
nУдaлeниe Воздyxa.................................................................8
nЭлeктpичecкиe Cоeдинeния ................................................8
nЭлeктpомонтaжныe Рaботы.................................................8
ДPУГИE .......................................................................................9
nПpовepкa Отcyтcтвия Утeчки Гaзa .....................................9
nУcтaновкa положeния пepeключaтeля
диcтaнционного Упpaвлeния................................................9
nВыбор А-В на пульте ДУ .......................................................9
nПpобнaя Экcплyaтaция.........................................................9
nУcтaновкa Aвтомaтичecкого Повтоpного Пycкa................9
RU
SADRŽAJ
MJERE SIGURNOSTI..................................................................1
SHEMA UGRADNJE UNUTARNJIH I VANJSKIH JEDINICA....3
nDodatni Dijelovi za Ugradnju Prema Izboru ............................3
UNUTARNJA JEDINICA .............................................................4
nMjesto Ugradnje ......................................................................4
nIzrezivanje Rupe i Postavljanje Ploče za Ugradnju .................4
nKako Ugraditi Unutarnju Jedinicu ............................................5
n Skrivena Montaža....................................................................... 6
VANJSKA JEDINICA...................................................................7
nMjesto Ugradnje ......................................................................7
nMjere Opreza za Montažu u Područjima s Jakim Snijegom i
Niskim Temperaturama ...........................................................7
nIspuštanje Vode iz Vanjske Jedinice .......................................7
nSklop Cijevi Rashladnog Sredstva ..........................................7
nPražnjenje ...............................................................................8
nŽičana Veza ............................................................................8
nElektrični Radovi......................................................................8
OSTALO.......................................................................................9
nProba Isticanja Plina................................................................9
nPoložaji Prekidača za Odabir Daljinskog Upravljača...............9
nOdabir A-B Pomoću Daljinskog Upravljača.............................9
nProbni Rad ..............................................................................9
nPostava za Automatsko Ponovno Pokretanje .........................9
CR
TARTALOMJEGYZÉK
BIZTONSÁGI ELŐÍRÁSOK.........................................................1
BELTÉRI ÉS KÜLTÉRI EGYSÉGEK ÜZEMBE HELYEZÉSE....3
nKülön Rendelhető Alkatrészek ................................................3
BELTÉRI EGYSÉG......................................................................4
nA Felszerelés Helye ................................................................4
nLyuk Kivágása és a Felszerelése............................................4
nA Beltéri Egység Felszerelése ................................................5
n Rejtett Felszerelés...................................................................... 6
KÜLTÉRI EGYSÉG......................................................................7
nA Felszerelés Helye ................................................................7
nAz Olyan Helyeken Történő Felszerelésre Vonatkozó
Óvintézkedések, Ahol Havazásra és Hidegre Lehet
Számítani ................................................................................7
nA Víz Elvezetése a Kültéri Egységből .....................................7
nHűtőközegcső-Csatlakozások .................................................7
nLégtelenítés ............................................................................8
nKábelezés................................................................................8
nElektromos Munka...................................................................8
EGYEBEK....................................................................................9
nTömítettségvizsgálat ...............................................................9
nA Távirányító Kiválasztó Kapcsolójának Beállítása.................9
nA Távirányítón az A-B Állás Kiválasztása................................9
nTesztüzem...............................................................................9
nAutomatikus Újraindítás Beállítás............................................9
HU
İÇİNDEKİLER
GÜVENLİK ÖNLEMLERİ ............................................................1
İÇ VE DIŞ ÜNITENIN MONTAJ ŞEMASI ....................................3
nİsteğe Bağlı Montaj Parçaları ..................................................3
İÇ ÜNİTE ......................................................................................4
nMontaj Yeri ..............................................................................4
nBir Delik Açılması ve Montaj Plakasının Yerleştirilmesi...........4
nDış ünitenin monte edilmesi ....................................................5
n Gizli yalıtım................................................................................. 6
DIŞ ÜNİTE....................................................................................7
nMontaj Yeri ..............................................................................7
nKarlı ve Soğuk Bölgelerde Montaj İle İlgili Önlemler................7
nDış üniteden suyun Tahliye Edilmesi ......................................7
nSoğutma Maddesi Boru Bağlantısı..........................................7
nBoşaltma .................................................................................8
nKablo Bağlantısı ......................................................................8
nElektrik İşi................................................................................8
DİĞERLERİ..................................................................................9
nGaz Kaçağı Testi.....................................................................9
nUzaktan Kumanda Seçici Düğmesinin Ayarlanması ...............9
nUzaktan Kumanda ile A-B Seçimi ...........................................9
nTest İşlemi...............................................................................9
nOtomatik Yeniden Başlama Ayarı ...........................................9
TR
Toshiba 1112150201 (TOC)
CONTENTS
PRECAUTIONS FOR SAFETY....................................................1
INSTALLATION DIAGRAM OF INDOOR AND OUTDOOR
UNITS...........................................................................................3
nOptional Installation Parts .......................................................3
INDOOR UNIT..............................................................................4
nInstallation Place .....................................................................4
nCutting a Hole and Mounting Installation Plate .......................4
nHow to Install Indoor Unit ........................................................5
nConcealed Installation.............................................................6
OUTDOOR UNIT..........................................................................7
nInstallation Place .....................................................................7
nPrecautions about Installation in Regions with Snowfall and
Cold Temperatures..................................................................7
nDraining off the Water from the Outdoor Unit..........................7
nRefrigerant Piping Connection ................................................7
nEvacuating ..............................................................................8
nWiring Connection...................................................................8
nElectrical Work ........................................................................8
OTHERS.......................................................................................9
nGas Leak Test.........................................................................9
nSetting of Remote Control Selector Switch .............................9
nRemote Control A-B Selection ................................................9
nTest Operation ........................................................................9
nAuto Restart Setting ...............................................................9
EN

INHOUDSOPGAVE
VEILIGHEIDSVOORZORGEN.....................................................1
INSTALLATIESCHEMA VOOR BINNEN- EN
BUITENMODULES ......................................................................3
nOptionele Onderdelen .............................................................3
BINNENMODULE ........................................................................4
nInstallatieplaats........................................................................4
nGat Boren en Montageplaat Bevestigen .................................4
nDe binnenmodule installeren...................................................5
nVerborgen installatie................................................................6
BUITENMODULE.........................................................................7
nInstallatieplaats........................................................................7
nVoorzorgsmaatregelen voor Installatie in Gebieden met
Sneeuwval en Lage Temperaturen .........................................7
nHet water van de Buitenmodule Afvoeren...............................7
nKoelleidingsaansluiting............................................................7
nAfvoeren .................................................................................8
nBedrading................................................................................8
nElektriciteit...............................................................................8
OVERIGE .....................................................................................9
nGaslektest ...............................................................................9
nDe Keuzeschakelaar van de Afstandsbediening Instellen ......9
nAfstandsbediening Keuze A-B.................................................9
nTestwerking.............................................................................9
nAutomatische Herstart Instellen ..............................................9
NL
ΠΕΡΙΕXOΜΕΝΑ
ΠΡOΦΥΛΑΞΕΙΣ ΑΣΦΑΛΕΙΑΣ ......................................................1
ΔΙΆΓΡΑΜΜΑ ΕΓΚΑΤΆΣΤΑΣΗΣ ΤΗΣ ΕΣΩΤΕΡΙΚΉΣ ΚΑΙ
ΕΞΩΤΕΡΙΚΉΣ ΜOΝΆΔΑΣ ..........................................................3
nΠροαιρετικά Eξαρτήµατα Eγκατάστασησ...........................3
ΕΣΩΤΕΡΙΚΉ ΜOΝΆΔΑ............................................................... 4
nΣηµείο Eγκατάστασησ ..........................................................4
n Κψιµο Τρύπασ και Τοποθέτηση Πλάτησ Εγκατάστασησ ... 4
n Πώσ να Eγκαταστήσετε την Eσωτερική µονάδα.................. 5
n Κρυφή Εγκατάσταση............................................................... 6
ΕΞΩΤΕΡΙΚΉ ΜOΝΆΔΑ............................................................... 7
nΣηµείo Εγκατάστασησ ..........................................................7
nΠροφυλάξεισ Σχετικά µε την Εγκατάσταση σε Περιέσ
µε Χιονπτωση και Χαµηλέσ Θερµοκρασίεσ ......................7
nΑπoστράγγιση τoυ νερoύ απ την Eξωτερική µoνάδα .....7
nΣύνδεση Ψυκτικών Σωληνώσεων........................................7
nΕκκένωση...............................................................................8
nΣύνδεση Καλωδίωσησ...........................................................8
nΗλεκτρικέσ Εργασίεσ............................................................ 8
ΛOΙΠΑ ..........................................................................................9
nΈλεγχoσ ∆ιαρρoήσ Αερίoυ...................................................9
nΡύθµιση τoυ ∆ιακπτη Eπιλoγήσ Τ ηλεχειριστηρίoυ .........9
nΕπιλογή Α-Β τoυ Τ ηλεχειριστηρίoυ.....................................9
n∆oκιµή Λειτoυργίασ ..............................................................9
nAuto Restart Ρύθµιση ...........................................................9
GR
INNEHÅLL
SÄKERHETSANVISNINGAR ......................................................1
INSTALLATIONSSCHEMA FÖR INOMHUS- OCH
UTOMHUSENHETEN ..................................................................3
nValfria Installationskomponenter .............................................3
INOMHUSENHETEN ...................................................................4
nPlats för Montering ..................................................................4
nSkära ut ett Hål och Fästa Monteringsplåten ..........................4
nSå här monteras inomhusenheten ..........................................5
nDold montering........................................................................6
UTOMHUSENHETEN ..................................................................7
nPlats för Montering ..................................................................7
nFörsiktighetsåtgärder vid Installation i Områden med Snöfall
och Kalla Temperaturer...........................................................7
nDränering av Vatten Från Utomhusenheten............................7
nAnslutning av Köldmedierör ....................................................7
nVakuumsugning.......................................................................8
nLedningsdragningar.................................................................8
nElarbeten.................................................................................8
ÖVRIGT........................................................................................9
nKontrollera Gasläckor..............................................................9
nInställning av Fjärrkontrollens Omkopplare .............................9
nFjärrkontroll A-B Val ................................................................9
nTestkörning..............................................................................9
nInställning av Omstart..............................................................9
SV
SISÄLLYSLUETTELO
VAROTOIMENPITEET.................................................................1
SISÄ- JA ULKOYKSIKKÖJEN ASENNUSKAAVIO ...................3
nLisävarusteena Saatavat Asennusosat...................................3
SISÄYKSIKKÖ.............................................................................4
nAsennuspaikka........................................................................4
nAukon Tekeminen ja Asennuslevyn Kiinnittäminen.................4
nSisäyksikön asennus...............................................................5
nPiilotettu asennus....................................................................6
ULKOYKSIKKÖ...........................................................................7
nAsennuspaikka........................................................................7
nHuomiot Asennuksesta Alueille, Joissa on Lumisadetta ja
Kylmiä Lämpötiloja ..................................................................7
nVeden Poistaminen Ulkoyksiköstä ..........................................7
nKylmänesteputkien Liittäminen................................................7
nTyhjentäminen.........................................................................8
nJohtoliitännät ...........................................................................8
nSähkötyöt ................................................................................8
MUUT ...........................................................................................9
nKaasuvuototesti.......................................................................9
nKauko-ohjaimen Valitsinkytkimen Säätäminen........................9
nKauko-ohjaimen A-B Valinta ...................................................9
nKoekäyttö ................................................................................9
nAutomaattisen Uudelleenkäynnistyksen Asettaminen.............9
FI
INNHOLD
SIKKERHETSREGLER ...............................................................1
KOBLINGSSKJEMA FOR INNE- OG UTENDØRSENHETEN ...3
nEkstrautstyr .............................................................................3
INNENHETEN ..............................................................................4
nPlassering................................................................................4
nLage et Hull og Montere Montasjeplaten.................................4
nSlik Monterer du Innendørsenheten ........................................5
nSkjult Montering.......................................................................6
UTENDØRSENHET .....................................................................7
nMontasjested...........................................................................7
nForholdsregler ved Installasjon i Områder med Snø og Lave
Temperaturer...........................................................................7
nDrenere Vannet fra Utendørsenheten .....................................7
nTilkobling av Kjølerørene.........................................................7
nEvakuering ..............................................................................8
nTilkobling av Ledninger ...........................................................8
nElektrisk Arbeid .......................................................................8
ANNET .........................................................................................9
nGasslekkasjetest .....................................................................9
nStille Fjernkontrollbryteren.......................................................9
nFjernkontroll A-B Valg .............................................................9
nTestdrift ...................................................................................9
nInnstillinger for Auto Restart ....................................................9
NO
INDHOLD
SIKKERHEDSFORHOLDSREGLER...........................................1
INSTALLATIONSDIAGRAM FOR INDDØRS OG UDENDØRS
ENHED.........................................................................................3
nValgfrie Installationsdele .........................................................3
INDENDØRS ENHED ..................................................................4
nInstallationssted.......................................................................4
nSkæring af et Hul og Montering af Installationspladen............4
nSådan Installeres den Indendørs Enhed.................................5
nSkjult Installation .....................................................................6
UDENDØRS ENHED ...................................................................7
nInstallationssted.......................................................................7
nForholdsregler ved Installation i regioner, Hvor der Falder
Sne og Hvor der er Lave Temperaturer ..................................7
nDræning af vand fra den Udendørs enhed..............................7
nKølerørsforbindelsen ...............................................................7
nEvakuering ..............................................................................8
nTilslutning af Kabel..................................................................8
nElektrisk Arbejde .....................................................................8
ANDET .........................................................................................9
nGaslækagekontrol ...................................................................9
nIndstilling af Fjernbetjeningskontakten ....................................9
nValg af Fjernbetjening A-B ......................................................9
nTestdrift ..................................................................................9
nAuto-Omstartsindstilling ..........................................................9
DK
CUPRINS
MĂSURI DE SIGURANŢĂ...........................................................1
SCHEMA DE INSTALARE A UNITĂŢILOR INTERIOARĂ
ŞI EXTERIOARĂ..........................................................................3
nPiese de Instalare Opţionale ...................................................3
UNITATE INTERIOARĂ...............................................................4
nLocul de Instalare....................................................................4
nExecutarea unei Găuri şi Montarea Plăcii de Instalare............4
nCum se Instalează Unitatea Interioară ....................................5
n Instalarea Mascată..................................................................... 6
UNITATEA EXTERIOARĂ...........................................................7
nLocul de Instalare....................................................................7
nMăsuri de Precauţie privind Instalarea în Regiuni cu
ninsori Abundente şi Temperaturi Scăzute .............................7
nDrenarea Apei din Unitatea Exterioară....................................7
nRacordarea Ţevilor de lichid Refrigerent.................................7
nEvacuarea ..............................................................................8
nRacordarea Cablurilor .............................................................8
nLucrările Electrice....................................................................8
ALTELE........................................................................................9
nVerificarea Scurgerilor de Gaz ................................................9
nSetarea Butonului Selector al Telecomenzii............................9
nAlegerea Telecomenzii A-B.....................................................9
nVerificarea Funcţionării............................................................9
nSetarea Auto Restart (Repornirea Automată) .........................9
RO
СЪДЪРЖАНИЕ
ПРЕДПАЗНИ МЕРКИ ЗА БЕЗОПАСНОСТ ..............................1
ДИАГРАМА ЗА ИНСТАЛИРАНЕ НА ВЪТРЕШНИЯТ И
ВЪНШНИЯТ МОДУЛ..................................................................3
nДопълнителни Eлементи за Mонтаж...................................3
ВЪТРЕШЕН МОДУЛ ..................................................................4
nМясто за Mонтаж ..................................................................4
nПробиване На Отвор и Монтиране Намонтажната
Планка....................................................................................4
nКак се Монтира Вътрешното Тяло ......................................5
nСкрит монтаж ........................................................................6
ВЪНШЕН МОДУЛ.......................................................................7
nМясто за Mонтаж ..................................................................7
nПредпазни Mерки при Mонтиране в Pегиони
със Cнеговалеж и Hиски Tемператури ...............................7
nИзточване на Водата от Външното Тяло............................7
nСвързване на Tръбите за Хладилния Агент.......................7
nСъздаване на Bакуум ..........................................................8
nСвързване на Kабелите........................................................8
nРабота по Eлектрическата Cистема...................................8
ИДРУГИ.......................................................................................9
nТест за Hаличие на Газови Tечове .....................................9
nНастройване на Избиращия Превключвател за
Дистанционно Управление...................................................9
nИзбиране на Hастройки „А” или „В” на
Дистанционното Управление ...............................................9
nТестов Pежим ........................................................................9
nНастройка за Aвтоматично Pестартиране ........................9
BG
SISUKORD
OHUTUSABINÕUD......................................................................1
SISE- JA VÄLISSEADMETE PAIGALDUSSKEEM....................3
nValikulised Paigaldusdetailid ...................................................3
SISESEADE.................................................................................4
nPaigalduskoht..........................................................................4
nAugu Tegemine ja Paigaldusplaadi Monteerimine ..................4
nSiseseadme Paigaldamine......................................................5
nPeidetud Paigaldamine ...........................................................6
VÄLISSEADE...............................................................................7
nPaigalduskoht..........................................................................7
nEttevaatusabinõud Seadme Paigaldamiseks Madalate
Temperatuuridega ja Lumistes Piirkondades ..........................7
nVee Väljutamine Välisseadmest..............................................7
nJahutussegu Torustiku Ühendamine.......................................7
nTühjendamine .........................................................................8
nKaablite Ühendamine..............................................................8
nElektrilised Tööd......................................................................8
MUU .............................................................................................9
nGaasilekke Test.......................................................................9
nKaugjuhtimispuldi Valija Seadistamine....................................9
nKaugjuhtimispuldi A- ja B-Sätted.............................................9
nTestfunktsioon.........................................................................9
nAutomaatse Taaskäivitamise Säte ..........................................9
EE
SATURS
PROFILAKTISKIE DROŠĪBAS PASĀKUMI ...............................1
IEKŠTELPAS UN ĀRA AGREGĀTA MONTĀŽAS SHĒMA.......3
nPapildaprīkojuma Montāžas Daļas..........................................3
IEKŠTELPAS AGREGĀTS..........................................................4
nMontāžas Vieta........................................................................4
nCauruma Izveide un Montāžas Plāksnes Uzstādīšana ...........4
nKā Uzstādīt Iekštelpu Ierīci......................................................5
n Uzstādīšana zem apmetuma......................................................6
ĀRA AGREGĀTS ........................................................................7
nMontāžas Vieta........................................................................7
nDrošības Norādījumi Par Iekārtas Uzstādīšanu Reģionos,
Kuros Pastāv Snigšanas un Zemas Temperatūras Iespēja ....7
nŪdens Novadīšana no Ārējās Ierīces......................................7
nAukstumaģenta Cauruļu Savienojumi .....................................7
nIzsūknēšana ............................................................................8
nKabeļu Savienojumi.................................................................8
nElektroinstalācijas Darbi ..........................................................8
PAPILDINFORMĀCIJA ...............................................................9
nGāzes Noplūdes Pārbaude .....................................................9
nTālvadības Pults Selektorpārslēga Iestatīšana .......................9
nTālvadības Pults Režīma A/B Izvēle .......................................9
nDarbības Pārbaude .................................................................9
nDarbības Automātiskās Atsākšanas Funkcijas Iestatīšana.....9
LV
OBSAH
BEZPEČNOSTNÉ ZÁSADY ........................................................1
INŠTALAČNÁ SCHÉMA VNÚTORNEJ A VONKAJŠEJ JEDNOTKY ....3
nVoliteľné Inštalačné Diely ........................................................3
VNÚTORNÁ JEDNOTKA ............................................................4
nMiesto Inštalácie......................................................................4
nZhotovenie Diery a Montáž Inštalačnej Lišty...........................4
nInštalácia Vnútornej Jednotky .................................................5
n Skrytá Montáž ............................................................................ 6
VONKAJŠIA JEDNOTKA............................................................7
nMiesto Inštalácie......................................................................7
nUpozornenie pre Inštaláciu v Oblastiach so Snežením a
Nízkymi Teplotami...................................................................7
nOdvádzanie Vody z Vonkajšej Jednotky .................................7
nSpájanie Chladiacich Rúrok ....................................................7
nVyčerpanie Vzduchu ...............................................................8
nPripojenie Vodičov...................................................................8
nElektroinštalačná Práca...........................................................8
INÉ................................................................................................9
nTest Unikania Plynu ................................................................9
nNastavenie Prepínača na Diaľkovom Ovládači .......................9
nVoľba A-B na Diaľkovom Ovládači ..........................................9
nTestovacia Prevádzka .............................................................9
nNastavenie Automatického Reštartu .......................................9
SK
VSEBINA
VARNOSTNI UKREPI..................................................................1
NAMESTITVENA SHEMA NOTRANJE IN ZUNANJE ENOTE ....3
nIzbirni Namestitveni Deli..........................................................3
NOTRANJA ENOTA....................................................................4
nMesto za Namestitev...............................................................4
nRezanje Luknje in Montaža Namestitvene Plošče ..................4
nKako Namestiti Notranjo Enoto ...............................................5
nVgradna Namestitev................................................................6
ZUNANJA ENOTA.......................................................................7
nMesto za Namestitev...............................................................7
nOpozorila pri Namestitvi na Območjih s Snežnimi
Padavinami in Nizkimi Temperaturami....................................7
nOdvajanje Vode iz Zunanje Enote...........................................7
nPriključitev Hladilnih Cevi ........................................................7
nIzčrpavanje .............................................................................8
nPriključitev Napeljave ..............................................................8
nElektričarsko Delo ...................................................................8
DRUGO ........................................................................................9
nPreizkus Uhajanja Plina ..........................................................9
nNastavitev Izbirnega Stikala Daljinskega Upravljalnika...........9
nIzbira Nastavitve A-B na Daljinskem Upravljalniku..................9
nPreizkus Delovanja..................................................................9
nNastavitev za Samodejni Ponovni Zagon................................9
SI
Toshiba 1112150201 (TOC)

Toshiba 1112150201 (EN)
PRECAUTIONS FOR SAFETYPRECAUTIONS FOR SAFETY
Be sure to read this installation manual carefully before installing.
Recommend to the owner to perform maintenance periodically when using over long periods of time.
Be sure to follow the precautions provided here to avoid safety risks. The symbols and their meanings are shown below.
DANGER : It indicates that incorrect use of this unit can result in a high possibility of severe injury (*1) or death.
WARNING : It indicates that incorrect use of this unit may cause severe injury or death.
CAUTION : It indicates that incorrect use of this unit may cause personal injury (*2), or property damage (*3).
*1 : A severe injury refers to blindness, injury, burns (hot or cold), electrical shock, bone fracture, or poisoning that leaves aftereffects and
requires hospitalization or extended out-patient treatment.
*2 : Personal injury means a slight accident, burn, or electrical shock which does not require admission or repeated hospital treatment.
*3 : Property damage means greater damage which affects assets or resources.
For general public use
Power supply cord of parts of appliance for outdoor use shall be at least polychloroprene sheathed flexible cord (design H07RN-F) or cord designation
60245 IEC66 (1.5 mm2or more) (Shall be installed in accordance with national wiring regulations).
New refrigerant air conditioner installation
CAUTION
•THIS AIR CONDITIONER USES THE NEW HFC REFRIGERANT (R410A), WHICH DOES NOT DESTROY THE OZONE LAYER.
R410A refrigerant is apt to be affected by impurities such as water, oxidizing membranes, and oils because the pressure of R410A refrigerant is approx.
1.6 times of refrigerant R22. As well as the adoption of this new refrigerant, refrigerating machine oil has also been changed. Therefore, during installation
work, be sure that water, dust, former refrigerant, or refrigerating machine oil does not enter the refrigeration cycle of a new-refrigerant air conditioner.
To avoid mixing refrigerant and refrigerating machine oil, the sizes of charging port connecting sections on the main unit are different from those for the
conventional refrigerant, and different size tools are also required. For connecting pipes, use new and clean piping materials with highpressure withstand
capabilities, designed for R410A only, and ensure that water or dust does not enter. Moreover, do not use any existing piping as its pressure withstand
may be insufficient and may contain impurities.
DANGER
•FOR USE BY QUALIFIED PERSONS ONLY.
•MEANS FOR DISCONNECTION FROM THE SUPPLY HAVING A CONTACT SEPERATION OF AT LEAST 3 mm IN ALL POLES MUST BE
INCORPORATED IN THE FIXED WIRING.
•TURN OFF MAIN POWER SUPPLY BEFORE ATTEMPTING ANY ELECTRICAL WORK. MAKE SURE ALL POWER SWITCHES ARE OFF.
FAILURE TO DO SO MAY CAUSE ELECTRIC SHOCK.
•CONNECT THE CONNECTING CABLE CORRECTLY. IF THE CONNECTING CABLE IS CONNECTED WRONGLY, ELECTRIC PARTS MAY BE
DAMAGED.
•CHECK THE EARTH WIRE THAT IT IS NOT BROKEN OR DISCONNECTED BEFORE INSTALLATION.
•DO NOT INSTALL NEAR CONCENTRATIONS OF COMBUSTIBLE GAS OR GAS VAPORS. FAILURE TO FOLLOW THIS INSTRUCTION CAN
RESULT IN FIRE OR EXPLOSION.
•TO PREVENT OVERHEATING THE INDOOR UNIT AND CAUSING A FIRE HAZARD, PLACE THE UNIT WELL AWAY (MORE THAN 2 M) FROM
HEAT SOURCES SUCH AS RADIATORS, HEATERS, FURNACE, STOVES, ETC.
•WHEN MOVING THE AIR CONDITIONER FOR INSTALLING IT IN ANOTHER PLACE AGAIN, BE VERY CAREFUL NOT TO GET THE SPECIFIED
REFRIGERANT (R410A) WITH ANY OTHER GASEOUS BODY INTO THE REFRIGERATION CYCLE. IF AIR OR ANY OTHER GAS IS MIXED IN
THE REFRIGERANT, THE GAS PRESSURE IN THE REFRIGERATION CYCLE BECOMES ABNORMALLY HIGH AND IT RESULTINGLY CAUSES
BURST OF THE PIPE AND INJURIES ON PERSONS.
•IN THE EVENT THAT THE REFRIGERANT GAS LEAKS OUT OF THE PIPE DURING THE INSTALLATION WORK, IMMEDIATELY LET FRESH AIR
INTO THE ROOM. IF THE REFRIGERANT GAS IS HEATED BY FIRE OR SOMETHING ELSE, IT CAUSES GENERATION OF POISONOUS GAS.
•WHEN INTALLING OR RE-INSTALLING THE AIR CONDITIONER, DO NOT INJECT AIR OR OTHER SUBSTANCES BESIDES THE DESIGNATED
REFRIGERANT “R410A” INTO THE REFRIGERATING CYCLE. IF AIR OR OTHER SUBSTANCES ARE MIXED, AN ABNORMAL PRESSURE CAN
OCCUR IN THE REFRIGERATING CYCLE, AND THIS CAN CAUSE AN INJURY DUE TO A PIPE RUPTURE.
1

Toshiba 1112150201 (EN)
CAUTION
•Please read this installation manual carefully before installing the unit. It contains further important instructions for proper installation.
•Exposure of unit to water or other moisture before installation could result in electric shock. Do not store it in a wet basement or expose to rain or water.
•After unpacking the unit, examine it carefully for possible damage.
•Do not install in a place that can increase the vibration of the unit. Do not install in a place that can amplify the noise level of the unit or where noise and
discharged air might disturb neighbors.
•This appliance must be connected to the main power supply by means of a circuit breaker depending on the place where the unit is installed. Failure to
do so may cause electrical shock.
•Follow the instructions in this installation manual to arrange the drain pipe for proper drainage from the unit. Ensure that drained water is discharged.
Improper drainage can result in water leakage, causing water damage to furniture.
•Tighten the flare nut with a torque wrench using the prescribed method. Do not apply excess torque. Otherwise, the nut may crack after a long period of
usage and it may cause the leakage of refrigerant.
•Wear gloves (heavy gloves such as cotton gloves) for installation work. Failure to do so may cause personal injury when handling parts with sharp
edges.
•Do not touch the air intake section or the aluminum fins of the outdoor unit. It may cause injury.
•Do not install the outdoor unit in a place which can be a nest for small animals. Small animals could enter and contact internal electrical parts, causing a
failure or fire.
•Request the user to keep the place around the unit tidy and clean.
•Make sure to conduct a trial operation after the installation work, and explain how to use and maintain the unit to the customer in accordance with the
manual. Ask the customer to keep the operation manual along with the installation manual.
REQUIREMENT OF REPORT TO THE LOCAL POWER SUPPLIER
Please make absolutely sure that the installation of this appliance is reported to the local power supplier before installation. If you experience any problems
or if the installation is not accepted by the supplier, the service agency will take adequate countermeasures.
WARNING
•Installation work must be requested from the supplying retail dealership or professional vendors. Self-installation may cause water leakage, electrical
shock, or fire as a result of improper installation.
•Specified tools and pipe parts for model R410A are required, and installation work must be done in accordance with the manual. HFC type refrigerant
R410A has 1.6 times more pressure than that of conventional refrigerant (R22). Use the specified pipe parts, and ensure correct installation, otherwise
damage and/or injury may be caused. At the same time, water leakage, electrical shock, and fire may occur.
•Be sure to install the unit in a place which can sufficiently bear its weight. If the load bearing of the unit is not enough, or installation of the unit is
improper, the unit may fall and result in injury.
•Electrical work must be performed by a qualified electrical engineer in accordance with the code governing such installation work, internal wiring
regulations, and the manual. A dedicated circuit and the rated voltage must be used. Insufficient power supply or improper installation may cause
electrical shock or fire.
•Use a cabtyre cable to connect wires in the indoor/outdoor units. Midway connection, stranded wire, and single-wire connections are not allowed.
Improper connection or fixing may cause a fire.
•Wiring between the indoor unit and outdoor units must be well shaped so that the cover can be firmly placed. Improper cover installation may cause
increased heat, fire, or electrical shock at the terminal area.
•Be sure to use only approved accessories or the specified parts. Failure to do so may cause the unit to fall, water leakage, fire or electrical shock.
•After the installation work, ensure that there is no leakage of refrigerant gas. If the refrigerant gas leaks out of the pipe into the room and is heated by
fire or something else from a fanheater, stove or gas range, it causes generation of poisonous gas.
•Make sure the equipment is properly earthed. Do not connect the earth wire to a gas pipe, water pipe, lightning conductor, or telephone earth wire.
Improper earth work may be the cause of electrical shock.
•Do not install the unit where flammable gas may leak. If there is any gas leakage or accumulation around the unit, it can cause a fire.
•Do not select a location for installation where there may be excessive water or humidity, such as a bathroom. Deterioration of insulation may cause
electrical shock or fire.
•Installation work must be performed following the instructions in this installation manual. Improper installation may cause water leakage, electrical shock
or fire. Check the following items before operating the unit.
- Be sure that the pipe connection is well placed and there are no leaks.
- Check that the service valve is open. If the service valve is closed, it may cause overpressure and result in compressor damage. At the same time, if
there is a leak in the connection part, it may cause air suction and overpressure, resulting burst or injury.
•In pump down operations, ensure to perform the following procedures.
- Do not inject air into the refrigeration cycle.
- Be sure to close both service valves and stop the compressor before removing the refrigerant pipe. If removing the refrigerant pipe while the
compressor is operating with the service valves opened, it may cause to air absorbed and abnormal high pressure inside the refrigeration cycle and
resulting burst or injury.
•Do not modify the power cable, connect the cable midway, or use a multiple outlet extension cable. Doing so may cause contact failure, insulation
failure, or excess current, resulting in fire or electrical shock.
•If you detect any damage, do not install the unit. Contact your supplying dealer immediately.
•Never modify this unit by removing any of the safety guards or bypassing any of the safety interlock switches.
EN
ES
FR
IT
PT
PL
CZ
RU
CR
HU
TR
NL
GR
SV
FI
NO
DK
RO
BG
EE
LV
SK
SI
DE
2

(A)
(B)
(C)
(D)
Vinyl tape
Apply after carrying
out a drainage test.
600 mm or more only
when unobstructed
to the front and both
sides.
Extension
drain hose
(Not available,
provided by installer)
100 mm or more
100 mm or more
600 mm or more
600 mm or more
Saddle
1Installation plate
50 mm or more
50 mm or more
Shield pipe
Air filter
5Filter
6Filter
70 mm or more
Toshiba 1112150201-1 (EN)
INSTALLATION DIAGRAM OF INDOOR AND OUTDOOR UNITSINSTALLATION DIAGRAM OF INDOOR AND OUTDOOR UNITS
Part
code Parts name Q’ty
A
Refrigerant piping
Liquid side : ∅6.35 mm
Gas side : ∅9.52 mm
(RAS-(B) 10, 13UFV Series)
: ∅12.7 mm
(RAS-(B) 18UFV Series)
One
each
BPipe insulating material
(polyethylene foam, 8 mm thick) 1
CPutty, PVC tapes One
each
Optional Installation Parts
•Secure the outdoor unit with fixing bolts and nuts if the unit is likely to be exposed
to a strong wind.
•Use ∅8 mm or ∅10 mm anchor bolts and nuts.
•If it is necessary to drain the defrost water, attach drain nipple and cap water proof
to the bottom plate of the outdoor unit before installing it.
Fixing bolt arrangement of outdoor unit
RAS-10, 13, 18SAV Series
3Batteries
8Pan head
wood screw 4Remote control holder
Do not allow the drain hose to get
slack.
Make sure to run the drain hose
sloped downward.
The auxiliary piping can be
connected to the left, rear left, rear
right, right, bottom right or bottom
left.
Insulate the refrigerant pipes
separately with insulation, not
together.
8 mm thick heat resisting
polyethylene foam
Cut the piping
hole sloped
slightly.
Right
Rear right Left
Bottom right Rear left
Bottom left
Cut dot-line area
In case of right or left piping
* Drain nipple and cap
water proof are packed
in outdoor unit.
X When using a multi-system outdoor unit is used, refer to the installation manual
provided with the model concerned.
Air outlet
Drain outlet
Air inlet
108 mm
600 mm
28 mm
25 mm
90 mm
125 mm
320 mm
86 mm 102 mm
7Mounting screw 9Insulation sheet
2Wireless remote control
3

7 m
60
90
7 m
7 m
45
45
60100 45
45 45 45
100 70
60
100
230
150
(700)
(600)
(205)
15 15
90
15
15
272
560
590
670
Toshiba 1112150201 (EN)
INDOOR UNITINDOOR UNIT
Installation Place
Remote control
•A place where there are no obstacles such as a curtain that may block the
signal from the remote control.
•Do not install the remote control in a place exposed to direct sunlight or
close to a heating source such as a stove.
•Keep the remote control at least 1 m apart from the nearest TV set or
stereo equipment (This is necessary to prevent image disturbances or
noise interference).
•The location of the remote control should be determined as shown below.
Cutting a Hole and Mounting
Installation Plate
When the installation plate is directly mounted
on the wall
1. Securely fit the installation plate onto the wall by screwing it in the upper
and lower parts to hook up the indoor unit.
2. To mount the installation plate on a concrete wall with anchor bolts, use
the anchor bolt holes as illustrated in the below figure.
3. Install the installation plate horizontally in the wall.
NOTE
•When drilling a wall that contains a metal lath, wire lath or metal plate, be
sure to use a pipe hole brim ring sold separately.
•A place which provides the spaces around the indoor unit as shown in the
diagram.
•A place where there are no obstacles near the air inlet and outlet.
•A place which allows easy installation of the piping to the outdoor unit.
•A place which allows the front panel to be opened.
•In case of block, brick, concrete or similar type walls, make ∅5 mm holes
in the wall.
•Insert clip anchors for appropriate mounting screws 7.
Installation plate
(Keep horizontal direction)
∅5 mm hole
Clip anchor
(local parts)
Anchor bolt
Projection
15 mm or less
Cutting a hole
Mounting the installation plate and screw position
CAUTION
•Direct sunlight to the indoor unit’s wireless receiver should be avoided.
•The microprocessor in the indoor unit should not be too close to RF
noise sources.
(For details, see the owner’s manual)
1. After determining the pipe hole position, drill the pipe hole (∅65 mm) at a
slight downward slant to the outdoor side.
7Mounting screw
∅4 mm x 25 s
CAUTION
Failure to firmly install the unit may result in personal injury and property
damage if the unit falls.
Remote
control
Indoor unit
Reception range
(Side view) (Top view)
Reception range
* : Axial distance
: Pipe hole (∅65 mm)
(Side piping)(Rear piping)
(Bottom piping)
(Unit : mm)
Floor
Wall
Remote control
EN
ES
FR
IT
PT
PL
CZ
RU
CR
HU
TR
NL
GR
SV
FI
NO
DK
RO
BG
EE
LV
SK
SI
DE
4

47
49
210
163
64
29
85
66
40
100
108
49
542 58
4085
112
148
R45
120
Toshiba 1112150201 (EN)
How to Install Indoor Unit
1. Remove the air inlet grille. Open the air inlet grille and remove the strap.
2. Remove the front panel (Remove the 4 screws).
NOTE
•The hole should be made at a slight downward slant on the outdoor side.
Shield pipe
Drain hose
Extension drain hose
Inside the room
2. Put water in the drain pan and make sure that the water is drained out of
doors.
3. When connecting extension drain hose, insulate the connecting part of
extension drain hose with shield pipe.
CAUTION
Arrange the drain pipe for proper drainage from the unit.
Improper drainage can result in dew-dropping.
Front panel
Air inlet grille
Hook
Treatment of piping connection
1) Check the flare nut connections for the gas leak with a gas leak detector
or soap water.
2) To prevent gap in slit, fasten top and bottom with tape.
3) Slit is covered with tape.
4) Fasten with supplied Insulate sheet to prevent gap on the top of slit.
Gas leak check Tape
Slit
9Insulation sheet
Do not rise the
drain hose.
Do not form the
drain hose into
a wavy shape.
Do not put the
drain hose end
into water.
Do not put the
drain hose end in
the drainage ditch.
Drainage
1. Run the drain hose sloped downwards.
Wiring connection
Wiring of the connection cable is necessary to remove the front panel.
1. Remove the terminal cover and cord clamp.
2. Insert the connecting cable (according to the local rule) into the pipe hole
on the wall.
3. Take out the connecting cable through the cable slot on the rear panel so
that it protrudes about 50 cm from the front.
4. Insert the connecting cable fully into the terminal block and secure it
tightly with screws.
5. Tightening torque : 1.2 N·m (0.12 kgf·m)
6. Secure the connecting cable with the cord clamp.
7. Fix the terminal cover, install the front panel and grille inlet.
CAUTION
•Be sure to refer to the wiring system diagram labeled inside the front
panel.
•Check local electrical cords and also any specific wiring instructions or
limitations.
110 mm
20 mm
10 mm
50 mm
NOTE
•Use stranded wire only.
•Wire type : H07RN-F or 60245 IEC66 (1.0 mm2or more)
Stripping length of the connecting cable
Terminal
block
Earth line
Screw
Cord clamp
Earth screw
Earth line
Screw
Terminal cover
Hook
Layout of connection piping
Connection piping
430 mm
Tape
5

(700)
(600)
272
560
670
240 340
Toshiba 1112150201 (EN)
Concealed Installation
The special method to install the indoor unit bury in the wall is shown here.
Please make sure to change to wall burying mode.
1. To switch to the wall burying mode
To switch to the wall burying mode, press and hold AIR OUTLET
SELECT button for 20 seconds.
- When the operation set up and 5 beep sounds. Then indication at
Temperature indicator will light up for 5 seconds.
- To cancel, press AIR OUTLET SELECT button for 20 seconds then, 5
beep sounds. Then indication at Temperature indicator will blinks for 5
seconds.
- To prevent dewfall, above plate angle should be narrow.
3. Installation using the supporting plate
•To install into the existing wall hole, if it is impossible to keep 20-30 mm
of depth, use the supporting plate for securing the distance.
•Arrange the screw positions and supporting plate as shown in the
figure.
•Be sure to switch to wall burying mode.
(Rear screws potion)
(Field supply)
: Screw holes
(Field supply)
(Unit : mm)
Wall burying mode
For prevent dewfall
2. Wall hole size
Wall hole size should be enough to keep the distance with indoor unit as
shown in the following figure.
50 or more Indoor unit 50 or more
(Front view)
70 or more
800 or more
Wall
Floor
670 or more
2
0 to 30
240 to 250
Floor
Wall
(Side view)(Unit : mm)
4. In case of lattice establishment
•Follow the following figure, make sure to keep enough distance
between lattice, frame and wall.
•Be sure to switch to wall burying mode.
•The lattice should be make of wood.
•Between the air inlet and outlet, should be devided with partition board.
•Be sure to establish the open part for RECEIVER.
•The open part of lattice must be opens 70 % or more of the wall hole.
•The open part of lattice must be arranged uniformly.
(Top view)
Partition board
(Unit : mm)
(Side view)
NOTE
•In case the plinth is fixed to the wall, please make sure to cut out the slit
on the left and right side of the main part.
Mounting directly on the floor.
1) Fix the leg of indoor unit on the floor with 2 mounting screws.
2) Fix the upper part of indoor unit on the wall with 4 mounting screws.
Cut dot-line area
Slit
6 screw
(M4 x 25L)
Installation on the wall
1) Fix the installation plate on the wall with 4 mounting screws.
2) Hook the indoor unit on the installation plate.
3) Fix the upper part of indoor unit on the wall with 4 mounting screws.
(Floor installation)
CAUTION
Make sure to fix it at a designated position with the screws.
Failure may result the damage of piping by the turning over of a set.
(Wall installation)
230
150
10
15
15
40
288
670
1000 mm or less
4 screw
(M4 x 25L)
4 screw
(M4 x 25L)
EN
ES
FR
IT
PT
PL
CZ
RU
CR
HU
TR
NL
GR
SV
FI
NO
DK
RO
BG
EE
LV
SK
SI
DE
6

A
BC
Toshiba 1112150201 (EN)
500 140
(Side view)
Partition board
20 to 30
Opening for receiver
(Front view)
800 or more
670 or more
Partition board
Opening for receiver
50 or more 50 or more
70 or more
OUTDOOR UNITOUTDOOR UNIT
Installation Place
•A place which provides enough spaces around the outdoor unit as shown
in the diagram.
•A place which can bear the weight of the outdoor unit and does not allow
an increase in noise level and vibration.
•A place where the operation noise and discharged air do not disturb your
neighbors.
•A place which is not exposed to a strong wind.
•A place free of a leakage of combustible gases.
•A place which does not block a passage.
•When the outdoor unit is to be installed in an elevated position, be sure to
secure its feet.
•This air conditioner accepts a connection piping length from 2 m to 20 m.
•There is no need to add refrigerant as long as the length of the
connection piping is 15 m or less.
•You will need to add 20 g of refrigerant per meter of added connection
piping for installation requiring connection piping to be between 16 m to
20 m.
•An allowable height level is up to 10 m.
•A place where the drain water does not cause any problems.
CAUTION
1. Install the outdoor unit in a location where there are no obstructions
near its air intake or air outlet.
2. When the outdoor unit is installed in a place that is always exposed to
strong winds like on the coast or on a high story of a building, secure
the normal fan operation using a duct or a wind shield.
3. Especially in windy areas, install the unit to prevent the admission of
wind.
4. Installation in the following places may result in trouble.
Do not install the unit in such places.
•A place full of machine oil.
•A saline-place such as the coast.
•A place full of sulfide gas.
•A place where high-frequency
waves are likely to be generated,
such as from audio equipment, welders, and medical equipment.
Strong
wind
Snow protection plate
Snow protection hood
At least 50 cm
Snow accumulation line
Holding frame
Front
Anchor bolts
Install at least 50 cm
above the snow
accumulation line.
•Do not use the supplied drain nipple for draining water. Drain the water from
all the drain holes directly.
•To protect the outdoor unit from snow accumulation, install a holding frame,
and attach a snow protection hood and plate.
* Do not use a double-stacked design.
Precautions about Installation in Regions
with Snowfall and Cold Temperatures
•When using a multi-system outdoor unit refer to the installation manual
provided with the model concerned.
Refrigerant Piping Connection
Flaring
1. Cut the pipe with a pipe cutter.
2. Deburr the inside of the pipe at its end.
Take steps to ensure that the removed burrs will not enter the pipe.
3. Remove the flare nuts provided with the indoor and outdoor units, and
insert them into the pipe.
4. Flare the pipe.
The projection margin of the pipe must be checked.
5. Check that the flare has the appropriate shape.
90Obliquity Roughness Warp
Pipe
Die
•If it is necessary to drain off the water from the outdoor unit, install two
water-proofing rubber caps and a drain nipple.
Draining off the Water
from the Outdoor Unit
Pipe A B Flare Nut
Outside
diameter Thickness Rigid
(clutch type)
R410A tool
Imperial
(wing nut
type)
R410A tool
C Tighten torque
mm mm mm mm mm mm N·m kgf·m
6.35 0.8 0 to 0.5 1.5 to 2.0 9.1 17 14 to 18 1.4 to 1.8
9.52 0.8 0 to 0.5 1.5 to 2.0 13.2 22 33 to 42 3.3 to 4.2
12.7 0.8 0 to 0.5 2.0 to 2.5 16.6 26 50 to 62 5.0 to 6.2
Water-proof rubber caps
(supplied with the outdoor unit)
Drain nipple
Base plate
7

123 LN
10
30 30
40 40
10
10
10
LN
123
10
30 30
40 40
10
10
10
LN
123
Toshiba 1112150201 (EN)
Model RAS-(B)10UFV
series RAS-(B)13UFV series RAS-(B)18UFV series
Power source 220–240V ~ 50Hz
220–230V ~ 60Hz
220–240V ~ 50Hz
220–230V ~ 60Hz
220–240V ~ 50Hz
220–230V ~ 60Hz
Maximum running
current 8.5A 11.0A 12.0A
Plug socket & fuse
rating 16A
Power cord H07RN-F or 60245 IEC66 (1.5 mm2or more)
Connecting cable H07RN-F or 60245 IEC66 (1.0 mm2or more)
Wiring Connection
1. Remove the valve cover, the electric parts cover and the cord clamp from
the outdoor unit.
2. Connect the connecting cable to the terminal as identified by the matching
numbers on the terminal block of indoor and outdoor unit.
3. Insert the power cord and the connecting cable fully into the terminal
block and secure it tightly with screws.
4. Use vinyl tape, etc. to insulate the cords which are not going to be used.
Locate them so that they do not touch any electrical or metal parts.
5. Secure the power cord and the connecting cable with the cord clamp.
6. Attach the electric parts cover and the valve cover on the outdoor unit.
Electrical Work
1. The supply voltage must be the same as the rated voltage of the air
conditioner.
2. Prepare the power source for exclusive use with the air conditioner.
Packed valve handling precautions
•Open the valve stem until it touches the stopper. Once it is in contact with
the stopper, refrain from applying any more force than is necessary.
•Securely tighten the valve stem cap with torque in the following table:
Evacuating
After the piping has been connected to the indoor unit, you can perform
vacuuming together at once.
Using a vacuum pump
Be sure to use a vacuum pump with counter-flow prevention function so
that inside oil of the pump does not flow backward into pipes of the air
conditioner when the pump stops.
(If oil inside of the vacuum pump enters the air conditioner, which use
R410A, refrigeration cycle trouble may happen.)
1. Connect the charge hose from the manifold valve to the service port of the
packed valve at gas side.
2. Connect the charge hose to the port of the vacuum pump.
3. Open fully the low pressure side handle of the gauge manifold valve.
4. Operate the vacuum pump to start evacuating. Perform evacuating for
about 15 minutes if the piping length is 20 meters
(15 minutes for 20
meters) (assuming a pump capacity of 27 liters per minute). Then confirm
that the compound pressure gauge reading is –101 kPa (–76 cmHg).
5. Close the low pressure side valve handle of the gauge manifold valve.
6. Open fully the valve stem of the packed valves (both gas and liquid
sides).
7. Remove the charging hose from the service port.
8. Securely tighten the caps on the packed valves.
VACUUMING
Evacuate the air in the connecting pipes and in the indoor unit using a
vacuum pump. Do not use the refrigerant in the outdoor unit. For details,
see the manual of the vacuum pump.
•Tightening torque for connection of flare pipe
The pressure of R410A is higher than R22
(Approx. 1.6 times). Therefore securely
tighten the flare pipes which connect the
outdoor unit and the indoor unit with the
specified tightening torque using a torque
wrench. If any flare pipe is incorrectly
connected, it may cause not only
a gas leakage but also trouble in the
refrigeration cycle.
Flare at
indoor unit side
Flare at
outdoor unit side
Pressure gauge
Manifold valve
–101 kPa (–76 cmHg)
Handle Lo
Connecting pipe
Compound pressure gauge
Vacuum
pump
Handle Hi
(Keep full closed)
Charge hose
(For R410A only)
Vacuum pump adapter for
counter-flow prevention
(For R410A only)
Service port (Valve core (Setting pin))
Packed valve at liquid side
Packed valve at gas side
Charge hose
(For R410A only)
Hexagon wrench
is required.
Gas side
(∅12.70 mm)
50 to 62 N·m
(5.0 to 6.2 kgf·m)
Gas side
(∅9.52 mm)
33 to 42 N·m
(3.3 to 4.2 kgf·m)
Liquid side
(∅6.35 mm)
14 to 18 N·m
(1.4 to 1.8 kgf·m)
Service port 14 to 18 N·m
(1.4 to 1.8 kgf·m)
4 mm
CAUTION
•KEEP IMPORTANT 5 POINTS FOR PIPING WORK.
(1) Take away dust and moisture (inside of the connecting pipes).
(2) Tighten the connections (between pipes and unit).
(3) Evacuate the air in the connecting pipes using a VACUUM PUMP.
(4) Check gas leak (connected points).
(5) Be sure to fully open the packed valves before operation.
X When using a multi-system outdoor unit is used, refer to the installation
manual provided with the model concerned.
Stripping length of the connecting cable
Connecting cable Power cord Connecting cable Power cord
Terminal
block
Earth line
Connecting cable Power cord Connecting cable Power cord
Terminal
block
Earth line
RAS-10SAVR-A, RAS-18SAV-E
CAUTION
•Wrong wiring connection may cause some electrical parts burn out.
•Be sure to comply with local rule on running the wire from indoor unit
to outdoor unit (size of wire and wiring method, etc.).
•Every wire must be connected firmly.
•If incorrect or incomplete wiring is carried out, it will cause an ignition
or smoke.
•Prepare the power supply for exclusive use with the air conditioner.
•This product can be connected to the mains.
Connection to fixed wiring : A switch which disconnects all poles and
has a contact separation of at least 3 mm must be incorporated in the
fixed wiring.
EN
ES
FR
IT
PT
PL
CZ
RU
CR
HU
TR
NL
GR
SV
FI
NO
DK
RO
BG
EE
LV
SK
SI
DE
8

Toshiba 1112150201 (EN)
• Check the flare nut
connections for the gas
leak with a gas leak
detector or soap water.
Gas Leak Test
Check places for flare nut connection
(Indoor unit)
Check places for the outdoor unit.
Valve cover
Remote control selector switch
•When two indoor units are installed in the same room or adjacent two
rooms, if operating a unit, two units may receive the remote control
signal simultaneously and operate. In this case, the operation can
be preserved by setting either one indoor unit or remote control to B
setting (Both are set to A setting in factory shipment).
•The remote control signal is not received when the settings of indoor
unit and remote control are different.
•There is no relation between A setting/B setting and A room/B room
when connecting the piping and cables.
When two indoor units are installed in the separated rooms, it is not
necessary to change the selector switches.
Setting of Remote Control
Selector Switch
“B” Display
“00” Display
PRESET FAN
Remote Control A-B Selection
To separate using of remote control for each indoor unit in case of 2 air
conditioners are installed nearly.
Remote Control B Setup.
1. Push and hold button on the Remote Control by the tip of the pencil.
“00” will be shown on the display.
2. Press during pushing . “B” will show on the display and “00” will
disappear and the air conditioner will turn OFF. The Remote Control B is
memorized.
Note : 1. Repeat above step to reset Remote Control to be A.
2. Remote Control A has not “A” display.
3. Default setting of Remote Control from factory is A.
Unit B setup.
Press and hold MODE button for more than 20 seconds.
When A setup changed to B setup : 5 beeps will sound and operation
lamp blinks for 5 seconds.
When B setup changed to A setup : 5 beep will sound.
OTHERSOTHERS
Test Operation
Auto Restart Setting
How to set the Auto Restart
1. Press and hold OPERATION button on the indoor unit for 3 seconds to set
the operation (3 beep sound and OPERATION lamp blink 5 time/sec for 5
seconds).
2. Press and hold
OPERATION button on the indoor unit for 3 seconds to
cancel the operation (3 beep sound but OPERATION lamp does not blink).
• In case of ON timer or OFF timer are set, it dose not activate.
This product is designed so that, after a power failure, it can restart
automatically in the same operating mode as before the power failure.
To switch the TEST RUN (COOL) mode, press OPERATION button for 10
seconds (The beeper will make a short beep).
Information
The product are shipped with Auto Restart function in the off position.
Turn it on as required.
9

Toshiba 1112150201-1 (CVB)
1112150201-1