
DISPLAY LAMP BRIGHTNESS ADJUSTMENT
PRESET OPERATION
TEMPORARY OPERATION
QUIET OPERATION
COMFORT SLEEP OPERATION
SELF CLEANING OPEATION
(COOL AND DRY OPEATION ONLY)
AUTO RESTART FUNCTION SETTING
12
13
14
16
17
18
15
Todecreasethedisplaylampbrightnessorturnitoff.
1. Pressandhold for3secondsuntilbrightnesslevel( , ,
or )isshownonremotecontrolLCDthenreleasethebutton.
2. Press Rise or
Decrease
toadjustbrightnessin4levels.
Remote control
LCD Operationdisplay Brightness
Lampilluminatesfullbrightness.
100%
Lampilluminates50%brightness.
50%
Lampilluminates50%brightnessandthe
operationlampisturnedoff.
50%
Alllampsareturnedoff.
Allturnedoff
● Intheexamplesof and ,thelampilluminatesfor5secondsbefore
goingoff.
Setyourpreferredoperationforfutureuse.Thesettingwillbememorizedby
theunitforfutureoperation(exceptairflowdirection).
1.Selectyourpreferredoperation.
2.Pressandhold for3secondstomemorizethesetting.
The markdisplays.
3.Press :Operatethepresetoperation.
Incaseofthemisplacedordischargedremotecontrol
● PressingtheRESETbutton,theunitcanstartor
stopwithoutusingtheremotecontrol.
● OperationmodeissetonAUTOMATICoperation,
presettemperatureis24°Candfanoperationis
automaticspeed.
Tooperateatsuperlowfanspeedforquietoperation(exceptinDRYmode)
Press :Startandstoptheoperation.
Note:Undercertainconditions,QUIEToperationmaynotprovideadequate
coolingduetolowsoundfeatures.
Forcomfortablesleep,automaticallycontrolairflowandautomaticallyturnOFF.
Press :Select1,3,5or9hrsforOFFtimeroperation.
Note:Thecoolingoperation,thesettemperaturewillincreaseautomatically
1degree/hourfor2hours(maximum2degreesincrease).
Toprotectbadsmellcausedbythehumidityintheindoorunit.
1.Ifthe buttonispressedonceduring“Cool”or“Dry”mode,
thefanwillcontinuetorunforother30minutes,thenitwillturnoff
automatically.Thiswillreducethemoistureintheindoorunit.
2.Tostoptheunitimmediately,pressthe more 2 times
within30seconds.
MAINTENANCE
OPERATION AND PERFORMANCE
TROUBLESHOOTING (CHECK POINT)
REMOTE CONTROL A-B SELECTION
19
20
21
22
Firstly,turnoffthecircuitbreaker.
Indoor Unit and Remote Control
● Cleantheindoorunitandtheremotecontrolwithawetclothwhenneeded.
● Nobenzine,thinner,polishingpowderorchemically-treatedduster.
Air filters
Cleanevery2weeks.
1.Opentheairinletgrille.
2.Removetheairfilters.
3.Vacuumorwashandthendrythem.
4.Reinstalltheairfiltersandclosetheairinletgrille.
1.Three-minuteprotectionfeature:Topreventtheunitfrombeingactivated
for3minuteswhensuddenlyrestartedorswitchedtoON.
2.Someminorcrackingsoundmayoccurwhenunitoperating.Thisisnormal
becausethecrackingsoundmaybecausedbyexpansion/contractionof
plastic.
Air conditioner operating conditions
Temp.
Operation
Outdoor Temperature Room Temperature
Cooling -10°C~46°C 21°C~32°C
Dry -10°C~46°C 17°C~32°C
The unit does not operate. Cooling or Heating is abnormally low.
●The power main switch is
turnedoff.
●Thecircuitbreakerisactivated
tocutoffthepowersupply.
●Stoppageofelectriccurrent
●ONtimerisset.
●Thefiltersareblockedwithdust.
●Thetemperaturehasbeenset
improperly.
●Thewindowsordoorsareopened.
●Theairinletoroutletoftheoutdoor
unitisblocked.
●Thefanspeedistoolow.
●TheoperationmodeisFANorDRY.
●POWERSELECTIONfunctionis
set75%or50%(This function is
depend on remote controller).
Toseparateusingofremotecontrolforeachindoorunitincaseof2air
conditionersareinstallednearly.
Remote Control B Setup.
1.PressRESETbuttonontheindoorunittoturntheairconditionerON.
2.Pointtheremotecontrolattheindoorunit.
3.Pushandhold buttonontheRemoteControlbythetipofthepencil.
“00”willbeshownonthedisplay.(Picture )
4.Press duringpushing .“B”willshowonthedisplayand
“00”willdisappearandtheairconditionerwillturnOFF.TheRemote
ControlBismemorized.(Picture )
Note:1.RepeatabovesteptoresetRemoteControltobeA.
2.RemoteControlAhasnot“A”display.
3.DefaultsettingofRemoteControlfromfactoryisA.
EN
Thisproductisdesignedsothat,afterapowerfailure,itcanrestart
automaticallyinthesameoperatingmodeasbeforethepowerfailure.
Information
TheproductisshippedwithAutoRestartfunctionintheONposition.
TurnitOFFifthisfunctionisnotrequired.
How to turn OFF the Auto Restart Function
● Pressandholdthe[OPERATION]buttonontheindoorunitfor3seconds
(3beepsoundsbutOPERATIONlampdoesnotblink).
How to turn ON the Auto Restart Function
● Pressandholdthe[OPERATION]buttonontheindoorunitfor3seconds
(3beepsoundsandOPERATIONlampblink5time/secfor5seconds).
Note:
● IncaseofONtimerorOFFtimerareset,AUTORESTARTOPERATION
doesnotactivate.