Toshiba RAV-SM402MUT-E User manual

1
English-1
Thank you very much for purchasing TOSHIBA Air Conditioner.
Please read this owner’s manual carefully before using your Air Conditioner.
• Be sure to obtain the “Owner’s manual” and “Installation manual” from constructor (or dealer).
Request to constructor or dealer
• Please clearly explain the contents of the Owner’s manual and hand over it.
ADOPTION OF NEW REFRIGERANT
This Air Conditioner is a new type that adopts a new refrigerant HFC (R410A) instead of the conventional
refrigerant R22 in order to prevent destruction of the ozone layer.
This appliance is not intended for use by person (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
CONTENTS
1ACCESSORIES (SOLD SEPARATELY)..................................................... 2
2PRECAUTIONS FOR SAFETY .................................................................. 2
3PARTS NAME ............................................................................................ 4
4PARTS NAME OF REMOTE CONTROLLER............................................. 5
5CORRECT USAGE .................................................................................... 7
6AUTOMATIC OPERATION (Auto Changeover) ........................................ 8
7ADJUSTMENT OFWIND DIRECTION ...................................................... 9
8TIMER OPERATION ................................................................................ 10
9MAINTENANCE ....................................................................................... 12
10 AIR CONDITIONER OPERATIONS AND PERFORMANCE ................... 14
11 RE-INSTALLATION.................................................................................. 15
12 TROUBLES AND CAUSES ..................................................................... 15

2English-2
1ACCESSORIES (SOLD SEPARATELY)
Remote controller Standard 4-way cassette panel optional parts
ON / OFF
FAN
TEMP.
SWING/FIXTIME
MODE
VENT
UNITSET CL
FILTER
RESET
TEST
TIMER SET
CODE No.
UNIT No.
TEST SETTING
DATA SET
R.C. No.
H
RBC-AMT32E
2PRECAUTIONS FOR SAFETY
WARNING
WARNINGS ABOUT INSTALLATION
•Make sure to ask the qualified installation professional in electric work to install the
air conditioner.
If the air conditioner is inappropriate installed by yourself, it may cause water leak,
electric shock, fire, and so on.
•Be sure to provide grounding.
Do not connect ground wires to gas pipes, water pipes, lightning rods or ground
wires for telephone cables.
CAUTION
TO DISCONNECT THE APPLIANCE FROM THE MAINS SUPPLY
This appliance must be connected to the mains by means of a switch with a contact
separation of at least 3 mm.
The installation fuse (16A) must be used for the power supply line of this
conditioner.
WARNINGS ABOUT OPERATION
•Cleaning of the air filter and other parts of the air filter involves dangerous work in
high places, so be sure to have a service person do it. Do not attempt it yourself.
The cleaning diagram for the air filter is there for the service person, and not for
the customer.
•Avoid cooling the room too strong or exposing the human body to cool breeze for a
long time as it is bad for the health.
•When you notice something abnormal with the air conditioner (smells like some-
thing scorching, poor cooling, etc.), immediately turn off the main switch, the circuit
breaker, from the mains to stop the air conditioner, and contact the dealer.
If the air conditioner is continuously operated with something abnormal, it may
cause machine failure, electric shock, fire, and so on.
WARNINGS ABOUT MOVEMENT AND REPAIR
•Do not move or repair any unit by yourself.
Since there is high voltage inside the unit, you may get electric shock when
removing the cover and main unit.
•Whenever the air conditioner needs repair, make sure to ask the dealer to do it.
If it is repaired imperfectly, it may cause electric shock or fire.
•When moving the air conditioner for re-installing at another place, ask the dealer to
do it.If it is imperfectly installed, it may cause electric shock or fire.
En

3
English-3
CAUTION
CAUTIONS ABOUT INSTALLATION
•Be sure to confirm the following cautions.
•Certainly lay the drain hose for perfect draining.
Bad drainage may cause flooding in the house and getting furniture wet.
•Make sure to connect the air conditioner to an exclusive power supply of
the rated voltage, otherwise the unit may break down or cause a fire.
•Do not install the unit in a place where inflammable gas may leak.
If inflammable gas accumulates around the unit, it may cause a fire.
CAUTIONS ABOUT OPERATION
•Carefully read this manual before starting the air conditioner.
There are many important things to keep in mind for daily operation.
•Do not use this air conditioner for special purpose such as preserving food,
precision instruments, art objects, breeding animals, growing potted plants,
etc.
•Avoid exposing potted plants and animals to the wind of the air conditioner,
since it badly affects the health and growth of them.
•When the air conditioner is operated with a combustion appliance in the
same place, be careful of ventilation to let fresh air enter the room.
Poor ventilation causes oxygen shortage.
•Do not place any combustion appliance in a place where it is directly
exposed to the wind of air conditioner; otherwise it may cause imperfect
combustion.
•When the air conditioner is used in a closed room, be careful of sufficient
ventilation of the room. Poor ventilation causes oxygen shortage.
•Do not touch any switches with wet finger, otherwise you may get an
electric shock.
•If the air conditioner won’t be used for a considerably long time, turn off the
main switch or the circuit breaker, for safety.
•Check the concrete blocks, etc. of the base of the outdoor unit occasionally.
If the base is left damaged or deteriorated, the unit may topple over and
inflict an injury to a person as the worst case.
•Do not put anything on the outdoor unit or step onto it.
If you do so, it may not only topple over the unit but also injure yourself.
•To make the air conditioner operate in its original performance, operate it
within the range of the operating temperature specified in the instructions.
Otherwise it may cause a malfunction, or water leak from the unit.
•Prevent any liquid from falling into the remote controller.
Do not spill juice, water or any kind of liquid.
2PRECAUTIONS FOR SAFETY

4English-4
Air inlet (Side and rear)
Pipes and electric wires
Air outlet
Projection of air filter
Remote controller
Button
Button to open/close the
suction port
Earth screw
Provided in the electric parts box
Discharge louver
of discharge port
Change the direction of the air
to be discharged according to
cool/heat mode.
ON / OFF
FAN
TEMP.
SWING/FIXTIME
MODE
VENT
UNITSET CL
FILTER
RESET
TEST
TIMER SET
CODE No.
UNIT No.
TEST SETTING
DATA SET
R.C. No.
H
Suction airport
The air in the room is sucked
in from this port.
Air filter
Removes dust or trash.
(Provided on the suction port.)
3PARTS NAME
Indoor unit
Outdoor unit

5
English-5
4PARTS NAME OF REMOTE CONTROLLER
Display section
In the display example, all indicators are displayed for the explanation.
In reality only, the selected contents are indicated.
•When turning on the leak breaker at the first time,
SETTING
flashes on
the display part of the remote controller.
•While this display is flashing, the model is being automatically confirmed.
Accordingly, wait for a while after
SETTING
display has disappeared, and
then use the remote controller.
Display
section
Operation
section
SET
TIME
TIMER SET
TEST
FILTER
RESET
TEMP.
CL
FAN
SAVE
SWING/FIX
VENT
MODE
ON / OFF
UNIT LOUVER
5
78 9216 15
3
4
614
11
13 12
10
1
1SETTING display
Displayed during setup of the timer etc..
2Operation mode select display
The selected operation mode is displayed.
3CHECK display
Displayed while the protective device works or a
trouble occurs.
4Timer time display
Time of the timer is displayed.
(When a trouble occurs, the check code is
displayed.)
5Timer SET IN setup display
When pushing the Timer SET button, the display
of the timer is selected in order of
[OFF] →[OFF] repeat OFF timer →
[ON] →No display.
6Filter display
If “FILTER ”is displayed, clean the air filter.
7TEST run display
Displayed during a test run.
8Louver position display
Displays louver position.
9SWING display
Displayed during up/down movement of the louver.
10 Set up temperature display
The selected set up temp. is displayed.
11 Remote controller sensor display
Displayed while the sensor of the remote controller is
used.
12 PRE-HEAT display
Displayed when the heating operation starts or
defrost operation is carried out.
While this indication is displayed, the indoor fan stops.
13 No function display
Displayed if there is no function even if the button
is pushed.
14 Air volume select display
The selected air volume mode is displayed.
(AUTO) (HIGH)
(MED.) (LOW)
15 Unit Number display
Unit number of the indoor unit selected with the unit
select button or abnormal indicate the indoor/outdoor
unit.
16 Central control display
Displayed when the air conditioner is used under the
central control in combination with a central control
remote controller.
In case the remote controller is disabled by the
central control system, flashes.
The button operation is not accepted.
Even when you push ON/OFF, MODE, orTEMP.
button, and the button operation is not accepted.
(Settings made by the remote controller vary with the
central control mode.For details, refer to the Owner’s
Manual of the central control remote controller.)

6English-6
Operation section
Push each button to select a desired operation.
•The details of the operation needs to be set up once, afterward, the air conditioner can be used by pushing
ON / OFF
button only.
18
3
5
2
9
10
11
6
7
4
12
SET
TIME
TIMER SET
TEST
FILTER
RESET
TEMP.
CL
FAN
SAVE
SWING/FIX
VENT
MODE
ON / OFF
UNIT LOUVER
1
FAN
button (Air volume select button)
Selects the desired air volume mode.
2
TIMER SET
button (Timer set button)
TIMER SET button is used when the timer is set
up.
3
TEST
button (Check button)
The CHECK button is used for the check operation.
During normal operation, do not use this button.
4
VENT
button (Ventilation button)
Ventilation button is used when a fan which is
sold on the market is connected.
•If “No function ”is displayed on the remote
controller when pushing the Ventilation button, a
fan is not connected.
5
FILTER
RESET
button (Filter reset button)
Resets (Erases) “FILTER ”display.
6
SAVE
button (Power save operation)
No Function
7
SWING/FIX
button (Swing/Wind direction button)
Selects automatic swing or setting the louver
direction.
8Operation lamp
Lamp is lit during the operation.
Lamp is off when stopped.
It flashes during operating the protection device
or abnormal time.
9
ON / OFF
button
When the button is pushed, the operation starts,
and it stops by pushing the button again.
When the operation has stopped, the operation
lamp and all the displays disappear.
10
MODE
button (Operation select button)
Selects desired operation mode.
11
UNIT LOUVER
button (Unit/Louver select button)
Selects a unit number (left) and louver number
(right).
UNIT:
Selects an indoor unit when adjusting wind
direction when multiple indoor units are controlled
with one remote controller.
LOUVER:
No Function
12
TEMP.
button (Set up temperature button)
Adjusts the room temperature.
Set the desired set temperature by pushing
TEMP. or TEMP. .
OPTION :
Remote controller sensor
Usually the TEMP. sensor of the indoor unit senses
the temperature.
The temperature on the surrounding of the remote
controller can also be sensed.
For details, contact the dealer from which you have
purchased the air conditioner.

7
English-7
5CORRECT USAGE
When you use the air conditioner for the first time or when you change the SET DATA value, follow the procedure below.
From the next time, the operation displayed on the remote controller will start by pushing the
ON / OFF
button only.
Preparation
Turn on the main power switch and/or the leakage breaker.
•When the power supply is turned on, a partition line is displayed on the display part of the remote controller.
∗After the power supply is turned on, the remote controller does not accept an operation for approx. 1 minute, but
it is not a failure.
REQUIREMENT
•While using the air conditioner, operate it only with
ON / OFF
button without turning off the main power switch
and the leak breaker.
•When you use the air conditioner after it has not been used for a long period, turn on the leakage breaker at
least 12 hours before starting operation.
Start
1Push
ON / OFF
button.
The operation lamp goes on, and the operation starts.
2Select an operation mode with the
“MODE
MODE
” button.
One push of the button, and the display changes in
the order shown as follows.
3Select air volume with“
FAN
” button.
One push of the button, and the display changes in the order shown as follows.
•When air volume is “AUTO”, air volume differs
according to the room temperature.
•In heating operation, if the room temperature is not
heated sufficiently with VOLUME “LOW”
operation, select “MED.”or “HIGH”operation.
•The temperature sensor senses temperature near the suction air port of the indoor unit, which differs from the
room temperature depending on the installation condition.
A value of setting temperature is the measure of room temperature.
(“AUTO”is not selectable in the FAN mode.)
4Determine the set up temperature by pushing the“TEMP. ”or“TEMP. ” button.
Stop
Push
ON / OFF
button.
The operation lamp goes off, and the operation stops.
AUTO HEAT DRY COOL FAN
LOWMED.HIGH AUTO
SET
TIME
TIMER SET
TEST
FILTER
RESET
TEMP.
CL
FAN
SAVE
SWING/FIX
VENT
MODE
ON / OFF
UNIT LOUVER
1
2
3
4

8English-8
6AUTOMATIC OPERATION
(Auto Changeover)
When you set the air conditioner in mode or switch over from AUTO operation because of some settings change,
it will automatically select either cooling, heating, or fan only operation depending on the indoor temperature.
Start
1
ON / OFF
button
Push this button to start the air conditioner.
2Mode select button (MODE)
Select Auto.
3Temperature button
Set the desired temperature.
•In case of cooling, start the operation after approx. 1 minute.
•In case of heating, the operation mode is selected in accordance with the room temperature and operation
starts after approximately 3 to 5 minutes.
•When you select the Auto mode, it is unnecessary to set the fan speed.
The FAN speed display will show AUTO and the fan speed will be automatically controlled.
•After the heating operation has stopped, FAN operation may continue for approx. 30 seconds.
•When the room temperature reaches the set temperature and the outdoor unit stops, the super low wind is
discharged and the air volume decreases excessively.
•If the Auto mode is uncomfortable, you can select the desired conditions manually.
NOTE
When restarting the operation after stop
•When restarting the operation immediately after stop, the air conditioner does not operate for approx. 3 minutes
to protect the machine.
Stop
Push
ON / OFF
button.
Push this button again to stop the air conditioner.
3
1
2
SET
TIME
TIMER SET
TEST
FILTER
RESET
TEMP.
CL
FAN
SAVE
SWING/FIX
VENT
MODE
ON / OFF
UNIT LOUVER

9
English-9
7ADJUSTMENT OF WIND DIRECTION
•Be sure to draw a line about the use of the louver between cooling and heating operation in order to increase
the cooling/heating effect.
•When the air conditioner stops, the louver (adjustment plate of up/down wind direction) close automatically.
•In heating operation, when starting the operation/executing defrost operation or when the room temperature has
reached the set temperature, the fan stops or the wind volume becomes less extremely and the louver directs
upward.
•In this time, if you set the swinging operation or the wind direction, the setup contents are displayed on the
remote controller but the louver does not move as it directs upward.
•When starting the usual heating operation which blows hot air, the louver directs toward the setup wind direction.
How to set up the wind direction
1Push
SWING/FIX
during operation.
The wind direction changes for every push of the
button.
In HEAT operation
Direct the louver (adjustment plate of up/down wind
direction) downward.
If directing at horizontally, hot air
may not come to the foot.
Initial setup
Initial setup
Initial setup
How to stop swinging
1Push
SWING/FIX
at a desired position while the
louver is swinging.
•When
SWING/FIX
is pushed after that, wind direction
can be set again from the highest position.
∗However, even if
SWING/FIX
is pushed while the louver
is swinging, the louver position is displayed as
follows and highest position of the louver may not
be selected.
Display when swinging is stopped
Repeat
In this case, push
SWING/FIX
again two seconds later.
•In COOL/DRY operation, the louver does not stop
as it directs downward.
If stopping the louver as it directs downward
during swing operation, it stops after moving to
the third position from the highest position.
Display when stopping the swing
In COOL/DRY operation
Direct the louver (adjustment plate of up/down wind
direction) horizontally.
If directing it downward, the dew
may from on the surface of the
air discharge port and may drop down.
In FAN operation
Select a desired wind direction.
How to start swinging
1Push
SWING/FIX
, set the louver (adjustment plate
of up/down wind direction) direction to the
lowest position, and then push
SWING/FIX
again.
SWING is displayed and the up/down wind
direction is automatically selected.
Display during swinging
1
SET
TIME
TIMER SET
TEST
FILTER
RESET
TEMP.
CL
FAN
SAVE
SWING/FIX
VENT
MODE
ON / OFF
UNIT LOUVER
FAN/HEAT
operation COOL/DRY operation
FAN/HEAT
operation COOL/DRY operation