Toshiba B-FP2D Series User manual

TOSHIBA Portable Printer
B-FP2D Series
Key Operation Specification
1st Edition: December 16, 2019

Modification History
KEY OPERATION SPECIFICATION
Date
Modified Pages
Description
16DEC2019
–
Newly published.

TABLE OF CONTENTS
Page
1SCOPE·······································································································································································································1
2OUTLINE···································································································································································································1
3OPERATION PANEL···········································································································································································1
4GENERAL VIEW OF KEY OPERATION ····································································································································2
5ONLINE MODE ······················································································································································································3
5.1 GENERAL VIEW OF KEY OPERATION···························································································································3
5.2 KEY FUNCTIONS········································································································································································4
5.3 LED FUNCTIONS········································································································································································5
5.4 LCD FUNCTIONS ·······································································································································································6
5.5 ONLINE MODE LCD DISPLAY············································································································································6
5.5.1 Online Mode LCD Display Example······························································································································6
5.5.2 Icon·······························································································································································································8
5.5.3 ONLINE MODE LCD DISPLAY·····································································································································10
5.6 Parameter print ·········································································································································································11
5.6.1 Outline of Parameter Print·············································································································································11
5.6.2 Parameter Print Examples···············································································································································11
5.7 SETTING VALUE DISPLAY·················································································································································13
5.8 THRESHOLD SETTING··························································································································································15
5.8.1 Outline of Threshold Setting ·········································································································································15
5.8.2 Threshold Setting Operation Example·······················································································································15
5.9 LCD MESSAGES AND LED indications························································································································17
5.10 LCD Message ·············································································································································································20
5.11 CHARGE ERROR NUMBER LIST·····································································································································28
6DISPLAY PATTERN AND KEY OPERATION FOR SYSTEM MODE········································································29
6.1 LIST BOX WITH SCROLLBAR··········································································································································29
6.2 Movement of the cursor when scrolled ·······················································································································30
6.3 VALUE SETTING DISPLAY·················································································································································31
6.4 INFORMATION DISPLAY ······················································································································································33
7SYSTEM MODE FOR SERVICE PERSONS AND SYSTEM ADMINISTRATORS (ALL MENU ITEMS ARE
AVAILABLE.) ································································································································································································34
7.1 OUTLINE OF SYSTEM MODE···········································································································································34
7.2 Diagnostic ·····················································································································································································35
7.2.1 MAINTE CNT ·········································································································································································35
7.2.1.1 COUNTER PARAMETER PRINT CONTENTS ·························································································36
7.2.2 Diagnostic ················································································································································································45
7.2.2.1 AUTO SELF-DIAGNOSIS PRINTOUT·········································································································46
7.2.3 Head Check············································································································································································53
7.2.4 LED Check··············································································································································································54
7.2.5 LCD Check ·············································································································································································55
7.2.6 Beep Check············································································································································································56
7.3 Mode Setting ··············································································································································································57
7.3.1 CMD Setting···········································································································································································58
7.3.2 Head Division Setting (HEAD DIV)·····························································································································58
7.3.3 Head Output Division Command Parameter Setting (Head DIV CMD)····················································59
7.3.4 B-EP Mode·············································································································································································59
7.3.5 Linerless Setting (LINERLESS)·····································································································································59
7.3.6 Print Type Setting (Print Type)···································································································································60
7.3.7 Post-print Stop Position Setting (Stop Position)·······························································································60
7.3.8 Back Feed Restriction Setting (Backfeed Limit)·································································································61
7.3.9 Strip Issue Back Feed Setting (Peel Backfeed) ·································································································62
7.4 Set PARAM·················································································································································································63

7.4.1 LCD Contrast Setting (LCD Contrast)·····················································································································64
7.4.2 Code Page Setting (Code Page) ·································································································································64
7.4.3 Zero Font ················································································································································································65
7.4.4 LCD Language Setting (LCD Language) ··················································································································66
7.4.5 Control Code Setting (Control Code) ·······················································································································67
7.4.6 EURO Font Code Setting (EURO Code)·················································································································68
7.4.7 MaxiCode Specification Setting (Maxicode Spec) ·······························································································68
7.4.8 Auto Power-off Timing Setting (Auto Off) ············································································································70
7.4.9 Auto Power off after Error (Error Power Off) ····································································································70
7.4.10 Power Save Mode Timing Setting (Sleep)·········································································································71
7.4.11 LCD Backlight Off Timing Setting (LCD Off)··································································································71
7.4.12 Battery Charge Mode Setting (Charge Mode) ·································································································72
7.4.13 Battery deterioration check(Battery CHK)·········································································································72
7.4.14 Automatic Print Head Check for Broken Dots At Power On Setting ···············································73
7.4.15 Print Head Check For Broken Dots After Cover Close Setting (Head Error CHK) ··················73
7.4.16 Resume Printing After Broken Dots Error Setting (Head Error PRT) ···············································74
7.4.17 Feed To Top Of Feed After Cover Close Setting (Feed Check) ························································74
7.4.18 Beep check (Beep)························································································································································75
7.4.19 XML Setting (XML)························································································································································75
7.4.20 Parts Alert (Parts Alert) ············································································································································76
7.4.20.1 Platen Roller ···························································································································································76
7.4.20.2 Thermal Head ·························································································································································76
7.4.21 System Mode Password Setting (Password) ····································································································77
7.4.21.1 System mode start screen when password is enabled····································································78
7.5 Adjust Set····················································································································································································79
7.5.1 Feed Amount Fine Adjustment (FEED ADJ.)········································································································80
7.5.2 X-coordinate Fine Adjustment (X Adjust) ··············································································································81
7.5.3 Print Tone Fine Adjustment (Tone Adjust) ···········································································································82
7.5.4 Reflective Sensor Manual Threshold Fine Adjustment (REFL Sensor)····················································82
7.5.5 Transmissive Sensor Manual Threshold Fine Adjustment (TRANS Sensor)··········································83
7.5.6 Strip Position Fine AdjustmentPeel Adjust············································································································84
7.5.7 Paper Size for ESC/POS Setting (ESC/POS Width）······················································································85
7.6 Test Print·····················································································································································································86
7.6.1 Print Condition······································································································································································87
7.6.1.1 Issue Count Setting (Issue Count)··············································································································88
7.6.1.2 Sensor Setting (Sensor) ····································································································································88
7.6.1.3 Print Type Setting (Print Type)····················································································································88
7.6.1.4 Label Length Setting (Label Length) ··········································································································89
7.6.2 Paper Feed Mode Setting (Paper Feed) ················································································································89
7.6.3 Slant Line 1dot·····································································································································································90
7.6.4 Slant Line 3dot·····································································································································································91
7.6.5 Characters···············································································································································································92
7.6.6 Barcode·····················································································································································································92
7.6.7 Non Printing ···········································································································································································92
7.6.8 Factory Test ··········································································································································································93
7.6.9 Auto Print(T)··········································································································································································93
7.6.10 Auto Print(R)·····································································································································································94
7.6.11 Process Print····································································································································································94
7.7 Sensor Display/Adjustment (Sensor ADJ)···················································································································95
7.7.1 Temperature ···········································································································································································95
7.7.2 Reflective·················································································································································································96
7.7.3 Transmissive···········································································································································································96
7.7.4 Paper End················································································································································································97
7.7.5 Battery Voltage (Battery VOLT) ·································································································································97

7.7.6 Backlash Step Count Adjustment 1 (Backlash1) ································································································97
7.7.7 Backlash Step Count Adjustment 2 / Backlash2······························································································97
7.8 RAM Clear ···················································································································································································98
7.8.1 No RAM Clear·······································································································································································98
7.8.2 Parameter Clear (Parameter)·········································································································································99
7.8.3 Maintenance Counter Clear (MAINTE Count) ···································································································· 102
7.9 Interface Setting (I/F Setting)········································································································································ 105
7.9.1 USB Serial Number Setting (USB) ······················································································································· 105
7.9.2 Wireless LAN Enable/Disable Setting (WLAN)·································································································· 105
7.9.2.1 WLAN Mode (MODE)········································································································································ 106
7.9.2.2 Band Select (BAND SELECT)····················································································································· 106
7.9.2.3 TCP/IP / TCP/IP············································································································································· 107
7.9.2.3.1 IP Mode···························································································································································· 107
7.9.2.3.2 Printer IP Address Setting (Printer IP ADD) ··············································································· 107
7.9.2.3.3 GATEWAY ADDRESS (Gateway ADD)······························································································ 107
7.9.2.3.4 Subnet Mask ·················································································································································· 107
7.9.2.4 Protocols ································································································································································ 108
7.9.2.4.1 Socket Communication Setting (Socket Port)·············································································· 108
7.9.2.4.2 Port Number ·················································································································································· 108
7.9.2.4.3 LPR Server····················································································································································· 108
7.9.2.4.4 SNMP Agent ·················································································································································· 108
7.9.2.5 Wireless LAN Power Saving Setting (Powersave)············································································ 108
7.9.3 Bluetooth··············································································································································································· 109
7.9.3.1 Mode········································································································································································· 109
7.9.3.2 Test Mode ····························································································································································· 109
7.9.3.3 Search Setting····················································································································································· 109
7.9.3.4 Security Level······················································································································································ 109
7.9.3.4.1 SSP AUTH type··········································································································································· 110
7.9.3.5 Auto Connect······················································································································································· 110
7.9.3.6 Inquiry/Page Scan Interval Setting (Scan Interval)·········································································· 110
7.9.3.7 Inquiry/Page Scan Window Setting (Scan Window)·········································································· 110
7.10 BASIC Setup ··········································································································································································· 111
7.10.1 BASIC Interpreter Setting (BASIC)···················································································································· 111
7.10.2 BASIC File Browser (File MAINTE)···················································································································· 111
7.10.3 BASIC Trace Setting (Trace)································································································································ 111
7.10.4 BASIC Expansion Mode (Expand Mode)··········································································································· 111
8SYSTEM MODE FOR USERS （AVAILABLE MENU ITEMS ARE LIMITED.) ····················································· 113
8.1 OUTLINE OF SYSTEM MODE FOR USERS··········································································································· 113
8.2 Shutdown ··················································································································································································· 114
8.3 Diagnostic ·················································································································································································· 114
8.4 Mode Setting ··········································································································································································· 114
8.5 Adjust Set················································································································································································· 114
8.6 Test Print·················································································································································································· 114
9USER SYSTEM MODE ·································································································································································115
9.1 OUTLINE OF SYSTEM MODE FOR USERS··········································································································· 115
9.1 Reset ··························································································································································································· 116
9.2 Mode Setting ··········································································································································································· 116
9.3 Set PARAM·············································································································································································· 116
9.4 Adjust Set················································································································································································· 116
9.5 Dump Mode ·············································································································································································· 116
9.6 Expand Mode ··········································································································································································· 117
9.7 I/F Setting················································································································································································ 117
9.8 BASIC Setup ··········································································································································································· 117
10 Operation during battery charge by AC/USB power supply ··············································································· 118

10.1 In Printer Power Off State·············································································································································· 118
10.2 In Printer Power On State ·············································································································································· 119
11 POWER SAVE MODE······························································································································································· 120
11.1 Shifting To Power Save Mode ······································································································································· 120
11.2 When A Wireless LAN Module Is Connected ········································································································· 120
11.3 Precausions··············································································································································································· 120
12 POWER OFF OPERATION····················································································································································· 121
12.1 TIME REQUIRED FOR POWER OFF··························································································································· 121
12.2 PRECAUTIONS ······································································································································································· 121
COPYRIGHT©2019 TOSHIBA TEC CORPORATION ALL RIGHTS RESERVED

-1-
1 SCOPE
This specification describes key operations of the B-FP2D series portable printers using their keys and the LCD
display.
2 OUTLINE
The key operations are performed roughly in two modes: online mode and system mode. In online mode, where
the printer is connected to a host device such as a personal computer, the key operations are performed mainly to
pause or restart the printer and to display printer status messages and error messages on the LCD. In system
mode, the key operations are performed mainly to conduct a self-test and to make various parameter settings.
This specification describes the key operations in these two modes.
For explanation purposes, this specification uses English key names and LCD messages of the B-FP, although
other languages are available for key names and LCD messages.
3 OPERATION PANEL
POWER
FEED
PAUSE
STATUS
CHARGE

-2-
4 GENERAL VIEW OF KEY OPERATION
[Power OFF]
IP address print (B-FP2D-GH50)
BD address print (B-FP2D-GH30/50)
Online mode
Data registration, label print, etc.
System mode for service persons and
system administrators
Printer self-test, various parameter settings,
etc.
SYSTEM MODE FOR USERS
Printer self-test, various parameter setting
s, etc
Download mode
Update of program and data
For details, refer to the Program Downloa
d Operation Specification.
Press and hold down the [POWER] key until the
message, “Initiallizing…” appears, then 3 sec. or
more elapses.
While holding down the [PAUSE] key, press the
[POWER] key for 1 sec. or more.
While holding down the [FEED] key, press the
[POWER] key for 1 sec. or more.
Press the [POWER] key
While holding down the [FEED] and [PAUSE]
keys, press the [POWER] key.
After [STATUS] LED blinks, it brigh
ts.
After [STATUS] LED blinks, it bright
s.
After [STATUS] LED blinks, it brights.
After [STATUS] LED blinks, it brights.

-3-
5 ONLINE MODE
5.1 GENERAL VIEW OF KEY OPERATION
Hold down [POWER]
(Release after 1.5 or more
labels are fed.)
Hold down [POWER]
(1 sec. or more)
Hold down
[FEED]+
[PAUSE]+
[POWER]
(10 sec. or more)
Online Mode
Forced
power OFF
Power OFF
Paper feed,
Reprint
Pause
Power OFF
Paper feed
Setting value
display
RS, BD, IP
Power OFF
Paper feed
Reset
Mode Setting
Set PARAM
Adjust Set
Dump Mode
BASIC Setup
I/F Setting
Expand Mode
THRESHOLD
Transmissive Reflective
[FEED]
[PAUSE]
Hold down
[POWER] (1 sec.
or more)
[FEED]
[POWER]
Hold down
[POWER] (1 sec.
or more)
[FEED]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
Hold down
[PAUSE] (3 sec.
or more)
Hold down
[FEED] (3 sec.
or more)
[PAUSE]
* The printer power cannot be turned off under this condition.
Press [FEED]: Moves the menu in the opposite direction
from when [PAUSE] is pressed.
Press [POWER]: Moves to each setting/process.
Hold down [POWER]: Moves to the top menu in User System
Mode. (*2)
* The printer power cannot be turned off under this condition.
[PAUSE]
(*1)
(*1) In TPCL1 mode, [FEED] key in Online state moves as reprint.
But when it is after power on or emulation changed, it moves as paper feed.
The other mode, it moves as paper feed.
(2) If it is in top menu, cursor moves to 1.Reset.
User System Mode
It can be selected sensor type by [FEED] and [PAUSE] key
Hold down
[PAUSE]
(3 sec.
or more)
Hold down
[FEED] (3 sec.
or more)
Printer state
Printer function

-4-
5.2 KEY FUNCTIONS
[POWER] key (1) Turns the printer power on from a power off state and initializes the printer.
(2) Performs various parameter settings.
[FEED] key: (1) Feeds or ejects 1 label. This key is also used to adjust a label to a proper position.
When the label is not properly positioned, feed 1 or 2 blank labels using this key before
printing so that the printer can start printing at the proper position.
(2) Prints data in the image buffer on one label (depending on TPCL1 mode, LABEL mode).
NOTE: During printing initiated by the [FEED] key, a Clear command or a drawing
command should not be sent from the host device, otherwise the resulting
printout will not be satisfactory showing an incorrect layout. The same may
happen if the [FEED] key is pressed to start printing while data is being drawn in
the image buffer.
(3) Performs a forced strip issue in strip wait state.
(4) Programs a threshold value.
[PAUSE] key: (1) Stops printing temporarily and resumes printing.
(2) Resumes printing after clearing an error.
Key operations while the printer is in online state
In pause state
Press [PAUSE]: Exits from a pause state.
Hold down [PAUSE]: Moves to the reset menu.
Press [FEED]: Feeds a paper.
Hold down [FEED]: Moves to the threshold setting menu.
In error state
Press [PAUSE]: Recovers from an error.
Hold down [PAUSE]: Moves to the reset menu.
Press [FEED]: No operation

-5-
5.3 LED FUNCTIONS
[STATUS] LED: Indicates the following statuses:
(red/purple/blue) Printer power, ON or OFF
Communication status of printer
Printer error
Battery level
Strip wait state
LED lighting patterns
Power OFF: ..................................................................OFF
Charging in power OFF state........................................OFF
Power ON 1) Battery level 3 or more
In idle state...........................................Blue/ON
Strip wait state......................................Blue/Blink
Error......................................................Red/Blink
2) Battery level 2 (near-low battery state)
In idle state...........................................Purple/ON
Strip wait state......................................Blue/Blink
Error......................................................Red/Blink
3) Battery level 1 (low battery state)
In idle state...........................................Red/ON
Strip wait state......................................Blue/Blink
Error......................................................Red/Blink
[CHARGE] LED: Indicates the following statuses:
(orange) Connection status of the AC adapter
Battery charge
LED lighting patterns
Power OFF 1) AC adapter not connected OFF
2) AC adapter connected
Charging...............................................Orange/ON
Full charge............................................OFF
Temperature error ................................Orange/Blink
Ambient temperature below 0 or higher than 45°C
Battery temperature below 0 or higher than 45°C
Power ON 1) AC adapter not connected OFF
2) AC adapter connected
Charging...............................................Orange/ON
Full charge............................................OFF
Printing .................................................OFF
Temperature error ................................Orange/Blink
Ambient temperature below 0 or higher than 45°C
Battery temperature below 0 or higher than 45°C

-6-
5.4 LCD FUNCTIONS
The LCD displays printer status messages.
LCD
Type
Graphics LCD
Size
128 dots (W) X 128 dots (H)
Display structure
12 digits x 7 lines *1
*1 Maximam digit change because of using proposional font.
5.5 ONLINE MODE LCD DISPLAY
5.5.1 Online Mode LCD Display Example
Printer
condition
LCD Display
Display contents
Online
← Icon
← Message (*3)
←Model name, Firmware version (*1)
Pause
← Icon
← Message
← Thenumberofremaininglabelstoprint(*2)
Cover open
（Error）
← Error icon
←Error message
← Message
← Thenumberofremaininglabelstoprint(*2)

-7-
Cover open
（ON LINE）
←Message
← Message
Setting
mode
← Icon
← Message (*3)
← Model name, Firmware version (*1)
*About image in User System Mode, Refer to [6 DISPLAY PATTERN AND KEY OPERATION FOR SYS
TEM MODE AND USER MODE]
*About icon, Refer to [5.5.2 Icon]
（*1）The model name description
BFP 2 D
Print method D: Direct thermal
Print width 2” width
Series model
V 1 . 0 x
revision up: SP, A-Z, a-z (Modify problem)
minor version 0-9 (Spec change)
Major version 1-9 (Spec change about hardware difference)
Firmware version: V
(*2) The remaining label description
TO DO: 0005
The number of remaining labels to print
[The number of remaining labels to print] = [Specified number of labels to print] –[The number of normally printed
labels before occurrence of an error or placing the printer in pause]
When the number of remaining labels to print is zero, it is not displayed.
(*3) For B-FP2D-GH50 only, the following additional message is displayed.
IP address The active IP address of the printer.
When the IP address is invalid, 000.000.000.000 is displayed.
Host name The host name used for name resolution is displayed. (For dynamic IP address)
If the IP address is static, nothing is displayed.

-8-
5.5.2 Icon
Five kinds of icon are displayed in the top line of the online mode display.
These icons are displayed in the online mode/error display.
Each mark are updated every 5 seconds.
Icon
Explanation
Wireless LAN icon
Displayed and used when the wireless LAN module is mounted.
The graph shows the strength of radio wave.
Graph 0: Outside the communication range
Graph 1: Strength of radio wave is weak.
Graph 2: Strength of radio wave is middle
Graph 3: Strength of radio wave is strong
Graph 4: Strength of radio wave is very strong
Bluetooth icon
Displayed and used when the wireless Bluetooth module is mounted.
OFF: Bluetooth connection invalid
ON: Bluetooth connection valid
Data transmission icon
Appears when a print job is present.
No connection
Data receiving
Data sending
Data receiving and sending
Battery level mark (*1)
Indicates a remaining battery power level (10 increments)
(Level1) Inoperative (low battery): (0%)
(Level2) Low (near-low battery): (10, 20%)
(Level3) Medium: (30, 40, 50, 60%)
(Level4) High: (70, 80%)
(Level5) Full (full charge): (90, 100%)
Charging
Error mark
Indicates a printer error status
OFF
Not in error state
In error state
Parts alert icon
(*2)
Displays parts life warning status
Platen Roller Alert
Platen Roller Near Alert
Thermal Head Alert

-9-
Thermal Head Near Alert
Battery check result
Icon
(*2)
Displays battery life warning status
No battery life problem
Battery replacement required
Temperature error occurred during battery check
Timeout error occurred during battery check
(*1) Battery icon list
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
- Corresponding table about Batery Level and Battery Voltage
* Depending on temperature, threthold of Battery Level is changed.
Battery Level
Ambient
temp
1
2
3
4
5
High-rate
battery
Over -5
degree C
<= 6.8V
<= 7.0V
<= 7.6V
<= 7.9V
<= 8.2V
|
|
|
|
|
|
Under -11
degree C
<= 6.8V
<= 7.0V
<= 7.6V
<= 7.9V
<= 8.2V
Battery
icon
0%
10%, 20%
30%, 40%,
50%, 60%
70%, 80%
90%, 100%
(*2) The battery percentage icon, the Parts Alert icon, and the Battery Check icon are displayed in the same
position.
If they occur simultaneously, the display priority is as follows:
1st Priority Battery Check Icon
No battery life problem
Battery replacement required
Temperature error occurred during battery check
Timeout error occurred during battery check
2nd Priority Parts Alert Icon
Thermal Head Alert
Platen Roller Alert
Thermal Head Near Alert
Platen Roller Near Alert
3rd Priority Battery Percent Icon
0% to 100%

-10-
5.5.3 ONLINE MODE LCD DISPLAY
Idling or normal issuing
Printing is stopped
If printer cover is
opened while printing:
When [PAUSE] key is
pressed while printing:
When [PAUSE] key is pressed, the printer
resumes printing if there is remaining data
After error recovery(close the printer
cover),
press [PAUSE] key
If there is remaining label, start to
print.
If printer cover is
opened while idling:
Close the printer cover.

-11-
5.6 Parameter print
5.6.1 Outline of Parameter Print
The B-FP with the Bluetooth module or the wireless LAN module performs a parameter print when the
[POWER] key is pressed for 3 seconds or more after the printer power is turned on and a “Initiallizing…”
message is displayed on the LCD.
An example of parameter print for each module is given in the subsequent section.
5.6.2 Parameter Print Examples
(1) With Bluetooth module (B-FP2D-GH30/GH50)
Print contents:
- Code128 Barcode (print BD address)

-12-
(2) With Wireless LAN module (B-FP2D-GH50)
Print contents:
- IP address (IP)
- Default Gateway (GW)
- Subnet Mask (SUB)
- Socket connection, Port number (TCP SOCK)
- Country Code (TYPE)
- LPR server (LPD)
- DHCP
- WLAN connection mode (CON)
- Host name
- ESSID(*1)
- MAC address
- Version information
- Code128 bardcode (print IP address)
(*1) ESSID prints in case of established connection. But it can be checked at Setting value display.
RF-LAN PARAMS TYPE[JPN]
IP [000.000.000.000] LPD [OFF]
GW [000.000.000.000] DHCP[ON ]
SUB[255.255.000.000] CON [INF]
TCP SOCK[ON ][09100]
HOST [ ]
ESSID[ ]
[ ]
MAC:00-23-a7-fd-d5-54
WLAN Ver3.1.1

-13-
5.7 SETTING VALUE DISPLAY
Display information about mounted I/F
(1) With Bluetooth module（B-FP2D-GH30/GH50）
From Online state
Press [PAUSE] key at online state.
-> PAUSE state
Press [POWER] key
[Case]
Bluetooth setting is enable, and module is a
vailable
[Display information]
- QR code:
Data is BD address
Press [POWER] key
[Case]
Bluetooth setting is enable, and module is a
vailable
[Display information]
- BD address
- Device nickname

-14-
(2) With Wireless LAN module（B-FP2D-GH50）
From Online state
Press [PAUSE] key at online state.
-> PAUSE state
Press [POWER] key
[Case]
Bluetooth setting is enable, and module is a
vailable
[Display information]
- QR code:
Data is BD address
Press [POWER] key
[Case]
Wireless LAN setting is enable, and module
is available
[Display information]
- IP address
- Allocate IP address (DYNAMIC/STATIC)
- MAC address
- dBm
- Channel
- BSSID
- Connection mode (AP MODE/ INFRA)
Press [POWER] key
[Case]
Wireless LAN setting is enable, and module
is available
[Display information]
- Socket port (TCP PORT)
- LPR server (LPR)
- Country code (Country Code)
- ESSID
Press [POWER] key
Goto Bluetooth Information state
[Case]
Bluetooth setting is enable, and module is a
vailable
[Display information]
- BD address
- Device nickname
About setting, Refer to
Network specification