Toshiba TDP-SP1U - SVGA DLP Projector User manual

OWNER’S MANUAL
TDP-SP1
In the spaces provided below, record the Model and Serial No. located at the bottom of
your projector.
Model No. Serial No.
Retain this information for future reference.
Others Maintenance Operations Preparations Before Using
DATA PROJECTOR

2
SAFETY PRECAUTIONS
The lightning flash with arrowhead symbol, within an equilateral triangle, is in-
tended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAG-
ES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABI-
NET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
WARNING: Handling the cord on this product or cords associated with accessories sold
with this product, will expose you to lead, a chemical known to the State of
California to cause birth defects or other reproductive harm. Wash hands af-
ter handling.
Lamp contains mercury. Disposal of this product may be regulated due to
environmental considerations. For disposal, reuse or recycling information,
please contact your local government or the Electronic Industries Alliance at
www.eiae.org.
MODEL NAME: TDP-SP1 USA only
TRADE NAME: DATA PROJECTOR MODEL NAME: TDP-SP1
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
FCC NOTICE: This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. This
equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and, if not installed and used in ac-
cordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
USA only
USA only

3
Before Using
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RESPONSIBLE PARTY: TOSHIBA AMERICA INFORMATION SYSTEMS, INC.
9740 Irvine Blvd., Irvine, CA 92618-1697 U.S.A
Phone: [phone]
CAUTION: Changes or modifications made to this equipment, not expressly approved by
Toshiba, or parties authorized by Toshiba, could void the user’s authority to
operate the equipment.
NOTICE: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil
numérique de la classe B est conforme à la norme NMB-003 du Canada.
USA only
CANADA only

4
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUC-
TIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED
ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFER-
ENCE.
This unit is fully transistorized and does not contain any parts that can be repaired by the
user.
WARNING:
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EX-
POSED TO DANGEROUS VOLTAGE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL ONLY.
1. Read Owner’s Manual
After unpacking this product, read
the owner’s manual carefully, and
follow all of the operating and
other instructions.
3. Source of Light
Do not look into the lens while the
lamp is on. The strong light from
the lamp may cause damage to
your eyesight.
2. Power Sources
This product should be operated
only from the type of power source
which does not exceed the voltage
range specified on the rating label
and the power cord. If you are not
sure of the type of power supply to
your home, consult your product
dealer or local power company.
4. Ventilation
Openings in the cabinet are pro-
vided for ventilation and to ensure
reliable operation of the product
and protect it from overheat-
ing. These openings must not be
blocked or covered. Never block
an opening by placing the product
on a bed, sofa, rug or other similar
surface. Do not place it in a built-
in installation such as a bookcase
or rack, unless proper ventilation is
provided.

5
Before Using
5. Heat
The product should be situated
away from heat sources such as
radiators, heat registers, stoves,
or other products (including ampli-
fiers) that produce heat.
6. Water and Moisture
Do not use this product near wa-
ter. - for example, near a bath tub,
wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a
swimming pool and the like.
7. Cleaning
Unplug this product from the wall
outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners.
Always use a soft cloth for clean-
ing.
8. Besurethatyourmlyin-
sert the plug into the wall
outlet.
Incorrect or faulty connections
may result in fire or electric shock.
Avoid using an unsound or loose
outlet.
9. Power Cord Protection
Power cords should be routed
so that they are not likely to be
walked on or pinched by items
placed upon or against them, pay-
ing particular attention to cords at
plugs, convenience receptacles,
and the point where they exit from
the product.
10. Overloading
Do not overload wall outlets. To
reduce the risk of electric shock,
do not use the polarized plug with
an extension cord, receptacle, or
other outlet unless the blades can
be inserted completely with three-
wire grounding type to prevent
blade exposure. Failure to follow
these instructions may result in
fire or electric shock.

6
11. Lightningstorms
For added protection for this
product during a storm, or when
it is left unattended and unused
for long periods of time, unplug it
from the wall outlet. This will pre-
vent damage to the product due
to lightning and power-line surges.
Never operate this unit on AC
power during a thunderstorm. If
you see lightning or hear thunder,
never touch the unit, cables and/
or peripherals. An electric surge
caused by the storm, may result in
an electrical shock or damage to
the unit.
12. Object and Liquid Entry
Never push objects of any kind
into this product through open-
ings as they may touch dangerous
voltage points or short-out parts
that could result in a fire or elec-
tric shock. Never spill liquid of any
kind on the product.
13. Do not place or keep the
projector within the reach
of the children.
It may fall or tip over, possibly
causing serious injury.
14. Do not place the product
vertically
Do not use the product in the up-
right position or any other vertical
positions to project the pictures. It
may fall which could result in seri-
ous injury and/or damage to the
product.
15. Stack Inhibited
Do not stack other equipment on
this product and do not place this
product on other equipment. The
top and bottom surface of this
product increase in temperature
during normal use and may dam-
age the other unit.
16. Attachments
Do not use attachments not rec-
ommended by the product manu-
facturer. Use of an incompatible
attachments could cause hazards
or damage to the product.
IMPORTANT SAFETY INSTRUCTIONS (Continued)

7
Before Using
Introduction
17. Accessories
Do not place this product on an
unstable cart, stand, tripod, brack-
et, or table. The product may fall,
causing serious injury to a child
or adult, and serious damage to
the product. A product and cart
combination should be moved with
care. Quick stops, excessive force,
and uneven surfaces may cause
the product and cart combination
to overturn.
S3125A
18. DamageRequiringService
Unplug this product from the wall
outlet and take the product to
qualified service personnel if you
encounter any of the following
conditions:
a) The power supply cord or plug is
damaged.
b) Liquid has been spilled, or objects
have fallen into the product.
c) The product has been exposed to
rain or water.
d) The product does not operate
normally when following the op-
erating instructions. Adjust only
those controls that are covered by
the operating instructions since an
improper adjustment of other con-
trols may result in damage and will
often require extensive work by a
qualified technician to restore the
product to its normal operation.
e) The product has been dropped or
damaged in any way (If the cabi-
net should break, please handle
with care to avoid injury).
f) The product exhibits a distinct
change in performance, which
indicates a need for service.
19. Ifglasscomponents,in-
cludinglensandlamp,
should break, contact your
dealer for repair service.
This product incorporates glass
components, including a lens and
a lamp. If these should break,
please handle with care to avoid
injury and contact your dealer for
repair service. Avoid any broken
pieces of glass since they may
cause injury. In the unlikely event
that the lamp ruptures, thoroughly
clean the area around the projec-
tor and discard any edible items
placed in that area since they may
be contaminated.
20. Servicing
Do not attempt to service this
product yourself as opening or
removing covers may expose you
to dangerous voltage or other haz-
ards. Refer all servicing to quali-
fied service personnel.

8
21. ReplacementParts
When replacement parts are re-
quired, be sure the service techni-
cian has used replacement parts
specified by the manufacturer or
have the same characteristics as
the original part.
Unauthorized substitutions may
result in fire, electric shock, or
other hazards.
(Only the replacement of the lamp
should be made by users.)
22. Safety Check
Upon completion of any service
or repairs to this product, ask the
service technician to perform safe-
ty checks to verify that the product
is in proper operating condition.
23. Donotleavethermal-
paperdocumentsoreas-
ilydeformeditemsontop
of the unit or near the air
exhaust for long periods
oftime.
The heat from the unit could erase
the information on the thermal
paper, or cause deformation or
warping.
24. Do not use the product in
a closed installation loca-
tion.
Do not place the product in a box
or in any other closed installation
location. Otherwise it may over-
heat, which could result in a risk
of fire.
IMPORTANT SAFETY INSTRUCTIONS (Continued)

9
Before Using
POWER SUPPLY INFORMATION
If your line voltage is 220 to 240V, use one of the following types of cable/plug.
Plug
configuration Plug type
Australian
240V
10A
North American
240V
15A
Switzerland
240V
6A
Line voltage
EURO
UK
220 240V
220 240V
200 240V
200 240V
200 240V
Plug
configuration Plug type Line voltage
Use a 5A fuse which is approved by ASTA
or BSI to BSI362.
Always replace the fuse cover after
changing the fuse.
IMPORTANT PRECAUTIONS
Moisture Condensation
Never operate this unit immediately after moving it from a cold location to a warm location.
When the unit is exposed to such a change in temperature, moisture may condense on
the lens and the crucial internal parts. Do not use the unit for at least 2 hours when there
is an extreme or sudden change in temperature to prevent the unit from possible damage.
Place and Manner of Installation
• Donotplaceinhotlocations,suchasnearheatingequipment.Doingsocouldcause
malfunction, and shorten the life of the projector.
• Avoidlocationswithoilorcigarettesmoke.Doingsowilldirtytheopticalparts,shortening
their lives, and darkening the screen.
• Donotusethisproductintheuprightpositionortiltitupordownbymorethan20°from
level. Doing so may cause a failure or shorten the life of the product.
• UsingthisinstrumentnearaTVorradiomaycauseinterferencetotheimagesoraudio
sound. If this happens, move it away from the TV or radio.
• Movingtheprojectorfromalow-temperatureroomtoahigh-temperatureroommaycause
condensation on the lens or internal parts. If you continue to use it in that situation it may
malfunction. Wait until the condensation naturally disappears.
• Inahighaltitudelocationwhereairisthin,coolingefciencyisreducedsousethepro-
jector with [Fanmode] set to [High].
p.34

10
EXEMPTION CLAUSES
• ToshibaCorporationbearsnoresponsibilityinthecaseofdamagesarisingfromnatural
disaster such as earthquakes, lightning, etc., fire not liable to Toshiba Corporation, acts
by third parties, other accidents, or use under abnormal conditions including erroneous or
improper operation and other problems.
• ToshibaCorporationbearsnoresponsibilityforincidentaldamages(lostprot,workinter-
ruption, corruption or loss of the memory contents, etc.) arising from the use of or the
inability to use this unit.
• ToshibaCorporationacceptsnoliabilitywhatsoeverforanydamagesarisingfromnot
having followed the descriptions in this Owner’s Manual.
• ToshibaCorporationacceptsnoliabilitywhatsoeverforanydamagesarisingfrommal-
functions arising from combination with equipment or software that is not related to
Toshiba Corporation.
Avoid Volatile Liquid
Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or
plastic products touching the unit for a long time, as they will leave marks on the finish.
Do not use a chemically saturated cloth.
• Thesetofprojectorishotafteruse.Handlewithcare.
• Donotusetheprojectorwhileholdingitinyourhandsorlap.
• Donotusetheprojectornearapowersourceandthelike,orinlocationslikeashiporve-
hicle that are subject to vibration or shock. Doing so may lead to a malfunction or shorten
service life.
• Onlyplugthepowercordintooutletsratedforusewiththepowercord’sspeciedvoltage
range. Do not overload extension cords or power strips as this can result in fire or electric
shock.
• Routethepowercableortheconnectingcableawayfromwherepeoplecouldtripoverit.
The projector may fall, which could result in severe injury.
• Besurethepowercordiseasilyreachedforunpluggingincaseofemergency.Donot
place any obstacles near a wall outlet in which the cord is plugged.
IMPORTANT PRECAUTIONS (Continued)

11
Before Using
OTHER INFORMATION
Copyrights
Showing or transmitting commercial imaging software or broadcast or cable-broad cast-
ing programs with the purpose of other than the personal and private viewing, including
modifying images using the freeze functions, or displaying with the varying aspect ratio
of the images, could violate the direct or indirect copyrights of the imaging software or
broadcast program, etc., if done without first consulting with the copyright holder. For this
reason, take appropriate measures before performing one of the actions listed above, in-
cluding obtaining a license from the copyright holder.
Disposal
This product contains substances which are harmful to humans and the environment.
• Thelampcontainsinorganicmercury.
Please dispose of this product or used lamps in accordance with local regulations.
FollowinginformationisonlyforEU-memberstates:
The use of the symbol indicates that this product may not be treated as
household waste. By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or
the shop where you purchased the product.
Trademarks
• VGA,SVGA,XGA,SXGA,UXGAaretrademarksorregisteredtrademarksofInterna-
tional Business Machines Corporation.
• DLP(DigitalLightProcessing)isaregisteredtrademarkofTexasInstruments,Inc.
• MacintoshisaregisteredtrademarkofAppleComputer,Inc.
• WindowsisaregisteredtrademarkofMicrosoftCorporationintheU.S.andothercoun-
tries.
• AdobeandAcrobatReaderareregisteredtrademarksofAdobeSystemsIncorporated.
• Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirre-
spective companies.
Notational Conventions Used in This Manual
• Referencestopageswithrelatedinformationareannotatedasfollows.
For example, if making a reference to page 35:
p.35
• Theillustrationsinthisdocumentareforreferencepurposesonlyandmaynotreflect
your package exactly.

12
REMOTE CONTROL BATTERY
Warning
• Neverthrowabatteryintoare.
• Usingthebatteryimproperlymaycausethemtoexplodeorleakandmayresultinseri-
ous injury. If battery-leaking fluid contacts skin, wash the fluid off immediately with clean
water and consult a doctor. If the fluid spills on an instrument, avoid contact and wipe it
off using tissue paper. Then dispose of the used tissue paper as flammable garbage after
moistening it with water.
• Keepthebatteryawayfromthereachofchildren.Batteryischokinghazardandcanbe
very dangerous if swallowed. If the battery is swallowed, seek medical assistance imme-
diately.
Notes
• BesuretouseaCR2025battery.
• Disposeofabatteryinadesignateddisposalarea.
• Checkandfollowyourlocalregulationsbeforedisposal.
• Attentionshouldbedrawntotheenvironmentalaspectsofbatterydisposal.
• Iftheremotecontrol doesnotoperatecorrectly,oriftheoperating rangebecomesre-
duced, replace the battery with a new one.
• Ifthebatteryisdeadorifyouwillnotbeusingtheremotecontrolforalongtime,remove
the battery to prevent battery acid from leaking into the battery compartment.

13
Before Using
CONTENTS
Before Using
SAFETY PRECAUTIONS ..................................................................................................2
IMPORTANT SAFETY INSTRUCTIONS............................................................................4
POWER SUPPLY INFORMATION .....................................................................................9
IMPORTANT PRECAUTIONS............................................................................................9
EXEMPTION CLAUSES ..................................................................................................10
OTHER INFORMATION ...................................................................................................11
REMOTE CONTROL BATTERY ......................................................................................12
CONTENTS .....................................................................................................................13
Preparations
Checking the package contents .......................................................................................15
Names of each part on the main unit ...............................................................................16
Names of each part on the control panel .........................................................................17
Names of each part on the remote control.......................................................................18
Parts on the rear panel.....................................................................................................19
Preparing and using the remote control...........................................................................20
Placement ........................................................................................................................21
Connection.......................................................................................................................23
Operations
Turning the power on and off............................................................................................24
Basic operations...............................................................................................................26
Using handy features .......................................................................................................28
Using auto setting (For computer input only)................................................................28
Correcting the keystone distortion ................................................................................28
Cutting off the picture and sound temporarily (Mute)....................................................29
Freezing the image (Freeze).........................................................................................29
Resizing image .............................................................................................................30
Using the menus ..............................................................................................................31
How to use the menus..................................................................................................31
The image adjustment menu ........................................................................................32
The display setting menu..............................................................................................33
The default setting menu ..............................................................................................34
Displaying Information (Status display).........................................................................35
Maintenance
About lamp.......................................................................................................................36
Lamp replacement ...........................................................................................................37
Lens and main unit cleaning ............................................................................................39
Others
Trouble indications ...........................................................................................................40
Before calling service personnel ......................................................................................41

14
Specifications...................................................................................................................42
List of general specifications..........................................................................................42
Separately sold product................................................................................................42
List of supported signals (RGB signals) .......................................................................43
List of supported signals (Component signals).............................................................44
List of supported signals (Video, S-Video signals) .......................................................44
Pin assignment of COMPUTER IN & MONITOR terminals ..........................................44
CONTROL terminal ......................................................................................................45

15
Preparations
Checking the package contents
The Supplied CD-ROM
The supplied CD-ROM contains an owner’s manual in Portable Document Format (PDF).
Please use Acrobat Reader 5 or later version to view the manual.
Adobe®Acrobat®Reader®or Adobe®Reader®
The supplied CD-ROM does not contain Acrobat®Reader®. If you cannot read PDF
files, please install Adobe Reader software in your computer by downloading it from the
Adobe Systems website.
Viewingthemanual
Run the CD-ROM and double-click on Start.pdf. Acrobat®Reader®launches, and the
menu screen of the Owner’s manual appears. Click on your language. The Owner’s
Manual cover and list of bookmarks appear. Click on a bookmark title to view that sec-
tion of the manual. Click on p. to view a reference page with related information.
See the Help menu for more information about Acrobat®Reader®.
Please make sure that the following items are included in the box, along with the main unit.
If any item is missing, immediately contact the store where you purchased the product.
(1) (4)
(2) (5)
(3) (6)
(1) Remote control
(2) CD-ROM
(3) Owner’s Manual (This document)
(4) RGB cable (3m)(See note below)
(5) Power cord (See note below)
(6) Carrying bag
Note
• Theshapeandnumberofsuppliedpowercordsvarydependingontheproduct
destination.
•Tomaintainoriginalperformance,alwaysusethesuppliedcables.
Save Original Packing Materials
The original shipping carton and packing materials will come in handy if you ever have to
ship your projector. For maximum protection when shipping your projector, repack the set
as it was originally packed at the factory.

16
Namesofeachpartonthemainunit
Back Front
Name : Function
(1) Lens : Projects expanded image.
(2) Infrared remote sensor : Senses commands from the remote control.
p.20
(3) Foot adjuster release button : Press to set up or stow the foot adjuster.
p.27
(4) Air exhaust : Expels air that has grown hot inside the projector.
(5) Air intake : Draws in air from outside the projector for internal cool
down.
(6) Control panel : Operates the projector.
p.17
(7) Zooming ring : Adjusts screen size.
p.27
(8) Speaker : Outputs audio sound.
(9) AC IN socket : Connect the supplied power cord here.
( 10 ) Rear panel : Connects external devices.
p.19
( 11 ) Antitheft lock slot : Attach a safety cable or any other antitheft device.
( 12 ) Tilt adjuster : Adjusts the projector’s horizontal tilt.
p.27
( 13 ) Lamp cover : Remove to replace lamp.
p.37
( 14 ) Foot adjuster : Adjusts the vertical projection angle.
p.27
( 15 ) Focusing ring : Adjusts screen focus.
p.27
(1)(3)
(2)
(4)(5)(6)(7)
(8) (5) (9) (10) (11) (12) (13) (14) (15)

17
Preparations
Namesofeachpartonthecontrolpanel
Name : Main Function
Control panel
(1) VOL +/- button : Adjusts the volume.
(2) ENTER button : Accepts the selected mode.
(3) KEYSTONE +/- button : Adjusts keystone distortion.
p.28
(4) Selection buttons : Menu selections and adjustments.
p.31
(5) INPUT button : Selects input source.
p.26
(6) ON/STANDBY button/ : Turns the power on/off (standby).
p.24
indicator : Displays power on/off mode.
p.24
(7) MENU button : Displays menus.
p.31
(8) TEMP indicator : Lights when internal temperature is too high.
p.40
(9) LAMP indicator : Displays lamp mode.
p.40
(3) (1)(2)(1)
(9) (5) (6) (7) (8) (4)

18
Namesofeachpartontheremotecontrol
Remote control
transmitter
(6)
(9)
(3)
(3)
(1) (1)
(9)
(5)
(7) (4)
(2)
(11)
(10)
(8)
Name : Main Function
(1) VOL +/- button : Adjusts the volume.
(2) ENTER button : Accepts the selected mode.
(3) KEYSTONE +/- button : Adjusts keystone distortion.
p.28
(4) Selection buttons : Menu selections and adjustments.
p.31
(5) INPUT button : Selects input source.
p.26
(6) ON/STANDBY button : Turns the power on/off (standby).
p.24
(7) MENU button : Displays menus.
p.31
(8) FREEZE button : Pauses image.
p.29
(9) RESIZE buttons : Enlarges images.
p.30
( 10 ) Auto-Set button : Performs auto-adjustment of input signals from computer.
p.28
( 11 ) MUTE button : Cuts off the picture and sound temporarily.
p.29

19
Preparations
Parts on the rear panel
Name : Main Function
(1) COMPUTER IN terminal : Input analog RGB signal from a computer or other
source, or a component video signal (Y/PB/PR) from
video equipment.
(2) S-VIDEO terminal : Input S video signals from video equipment.
(3) VIDEO terminal : Input video signals from video equipment.
(4) AUDIO IN terminal : Input audio signals.
(5) AUDIO OUT terminal : Outputs audio signals.
(6) MONITOR terminal : Connect to a computer display, etc.
(7) CONTROL terminal : When operating the projector via a computer, connect
this to the controlling computer’s RS-232C port.
p.45
(8) AC IN socket : Connect the supplied power cord here.
(9) Antitheft lock slot : Attach a safety cable or any other antitheft device.
(1) (5)(2) (3) (4) (6) (7)
(8) (9)

20
Preparingandusingtheremotecontrol
Notes
• Whenyouuseforthersttimeafter
purchase, a plastic sheet is provided
between the battery and its contact. Be
sure to remove by pulling it off.
• Whenoperatingtheremotecontrolfrom
behind the projector, the signal beam is
reflected on the projecting surface and
may travel a shorter distance to reach
the projector depending on the shape
and material of the projecting surface.
■Operatingtheremote
control
Point toward the projector’s
infraredremotesensor,andpressa
buttonontheremotecontrol.
• Operatingtheprojectorfromthefront
Approx. 7m
Approx.15
■Loading a coin cell battery
intotheremotecontrol
j Removethebatteryholder.
Hold down the side release firmly and pull
out the battery holder.
kLoad a coin cell battery (CR2025).
Be sure to align the plus and minus ends
of the battery properly.
3
V
O
L
T
S
CR2025
lReplace the battery holder back
intotheremotecontrol.
M
3
V
O
L
T
S
CR2025
Coin cell battery
• Beforeusingthebattery,besuretoobservetheSafetyPrecautionsdescribedinprevious
pages.
• Removethebatteryfromremotecontrolwhennotusingforextendedperiods.
• Iftheremotecontrolstopsworking,orifitsrangedecreases,replacethebatterywitha
new one.
• Keepthebatteryawayfromthereachofchildren.Batteryischokinghazardandcan
be very dangerous if swallowed. If the battery is swallowed, seek medical assistance
immediately.
Theremotecontrol
• Theremotecontrolmayfailtooperateiftheinfraredremotesensorisexposedtobright
sunlight or fluorescent lighting.
• Donotdroporbang.
• Donotleaveinhotorhumidlocations.
• Donotallowittogetwetorplaceitontopofwetobjects.
• Donottakeapart.
• Inrarecases,ambientconditionscouldimpedetheoperationoftheremotecontrol.Ifthis
happens, point the remote control at the main unit again, and repeat the operation.