Toshiba TLP-SX3500 User manual

1
Projector
TLP-SX3500
TLP-SX3500
User's Manual - Operating Guide
User's Manual - Operating Guide
Thank you for purchasing this projector.
TRADEMARK ACKNOWLEDGMENT :
• VGA and XGA are registered trademarks of the International Business Machines Corporation.
• Apple and Mac are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
• Internet Explorer is a trademark of Microsoft Corporation.
All other trademarks are the property of their respective owners.
WARNING Before using, first read the "Before using" section of this
manual. Then read other sections of this manual to ensure correct usage
through understanding. After reading, store them in a safe place for future
reference.
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transmission or use of this document or contents is not permitted without
express written authority.
NOTE
Downloaded From projector-manual.com Toshiba Manuals

2
Before Using
Before Using
SAFETY PRECAUTIONS
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES
ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Downloaded From projector-manual.com Toshiba Manuals

3
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND
INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE
MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE
REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use
can result in electric shock or fire hazard. The safeguards incorporated in this unit will
protect you if you observe the following procedures for installation, use and servicing. This
unit is fully transistorized and does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO
DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL ONLY.
1. Read Owner's Manual
After unpacking this product, read
the owner's manual carefully, and
follow all the operating and other
instructions.
2. Power Sources
This product should be operated
only from the type of power source
indicated on the marking label. If
you are not sure of the type of
power supply to your home,
consult your product dealer or
local power company.
For products intended to operate
from battery power, or other
sources, refer to the operating
instructions.
3. Source of Light
Do not look into the lens while the
lamp is on. The strong light from
the lamp may cause damage to
your eyes or sight.
4. Ventilation
Openings in the cabinet are
provided for ventilation and to
ensure reliable operation of the
product and to protect it from
overheating, and these openings
must not be blocked or covered.
The openings should never be
blocked by placing the product on
a bed, sofa, rug or other similar
surface. This product should not
be placed in a built-in installation
such as a bookcase or rack unless
proper ventilation is provided or
the manufacturer's instructions
have been adhered to.
Before Using (continued)
Before Using (continued)
Downloaded From projector-manual.com Toshiba Manuals

4
5. Heat
The product should be situated
away from heat sources such as
radiators, heat registers, stoves, or
other products (including
amplifiers) that produce heat.
Before Using (continued)
Before Using (continued)
IMPORTANT SAFETY INSTRUCTIONS (continued)
6. Water and Moisture
Do not use this product near water.
- for example, near a bath tub,
wash bowl, kitchen sink, or
laundry tub; in a wet basement; or
near a swimming pool and the like.
7. Cleaning
Unplug this product from the wall
outlet before cleaning. Do not use
liquid cleaners or aerosol
cleaners. Use a soft cloth for
cleaning.
8. Power-Cord Protection
Power-supply cords should be
routed so that they are not likely to
be walked on or pinched by items
placed upon or against them,
paying particular attention to
cords at plugs, convenience
receptacles, and the point where
they exit from the product.
9. Overloading
Do not overload wall outlets;
extension cords, or integral
convenience receptacles as this
can result in a risk of fire or
electric shock.
10.Lightning storms
For added protection for this
product during storm, or when it is
left unattended and unused for
long periods of time, unplug it
from the wall outlet. This will
prevent damage to the product
due to lightning and power-line
surges.
Downloaded From projector-manual.com Toshiba Manuals

5
Before Using (continued)
Before Using (continued)
IMPORTANT SAFETY INSTRUCTIONS (continued)
11. Object and Liquid Entry
Never push objects of any kind
into this product through openings
as they may touch dangerous
voltage points or short-out parts
that could result in a fire or electric
shock. Never spill liquid of any
kind on the product.
12.Do not place the product
vertically
Do not use the product in the
upright position to project the
pictures at the ceiling, or any other
vertical positions. It may fall down
and dangerous.
13.Stack Inhibited
Do not stack other equipment on
this product or do not place this
product on the other equipment.
Top and bottom plates of this
product develops heat and may
give some undesirable damage to
other unit.
14.Attachments
Do not use attachments not
recommended by the product
manufacturer as they may cause
hazards.
15.Accessories
Do not place this product on an
unstable cart, stand, tripod,
bracket, or table. The product
may fall, causing serious injury to
a child or adult, and serious
damage to the product. Use only
with a cart, stand, tripod, bracket,
or table recommended by the
manufacturer, or sold with the
product. Any mounting of the
product should follow the
manufacturer's instructions, and
should use a mounting accessory
recommended by the
manufacturer. A product and cart
combination should be moved
with care. Quick stops, excessive
force, and uneven surfaces may
cause the product and cart
combination to overturn.
S3125A
Downloaded From projector-manual.com Toshiba Manuals

6
Before Using (continued)
Before Using (continued)
16.Damage Requiring Service
Unplug this product from the wall
outlet and refer servicing to
qualified service personnel under
the following conditions:
a) When the power-supply cord or
plug is damaged.
b) If liquid has been spilled, or
objects have fallen into the
product.
c) If the product has been exposed
to rain or water.
d) If the product does not operate
normally by following the
operating instructions. Adjust only
those controls that are covered by
the operating instructions as an
improper adjustment of other
controls may result in damage
and will often require extensive
work by a qualified technician to
restore the product to its normal
operation.
e) If the product has been dropped
or damaged in any way.
f) When the product exhibits a
distinct change in performance -
this indicates a need for service.
IMPORTANT SAFETY INSTRUCTIONS (continued)
17.If glass components,
including lens and lamp,
should break, contact your
dealer for repair service.
This product incorporates glass
components, including a lens and
a lamp. If such parts should
break, please handle with care to
avoid injury and contact your
dealer for repair service. The
broken pieces of glass may cause
to injury. In the unlikely event of
the lamp rupturing, thoroughly
clean the area around the
projector and discard any edible
items placed in that area.
18.Servicing
Do not attempt to service this
product yourself as opening or
removing covers may expose you
to dangerous voltage or other
hazards. Refer all servicing to
qualified service personnel.
19.Replacement Parts
When replacement parts are
required, be sure the service
technician has used replacement
parts specified by the manufacturer
or have the same characteristics as
the original part. Unauthorized
substitutions may result in fire,
electric shock, or other hazards.
(Replacement of the lamp only
should be made by users.)
20.Safety Check
Upon completion of any service or
repairs to this product, ask the
service technician to perform safety
checks to determine that the product
is in proper operating condition.
21.
Do not leave thermal-paper
documents or easily
deformed items on top of the
unit or near the air exhaust.
The heat from the unit could erase
the information on the thermal paper,
or cause deformation or warping.
Also, when you touch a metal object
put near the air exhaust, a burn may
be caused.
Downloaded From projector-manual.com Toshiba Manuals

7
Before Using (continued)
Before Using (continued)
POWER SUPPLY CORD SELECTION
If your line voltage is 220 to 240V, use one of the following types of cable.
Plug
configuration Plug type Line voltage
EURO
UK
220 - 240V
220 - 240V
Use a 5A fuse which is approved by ASTA
or BSI to BSI362.
Always replace the fuse cover after
changing the fuse.
Australian
240V
10A
Switzerland
240V
6A
200 - 240V
IMPORTANT PRECAUTIONS
Save Original Packing Materials
The original shipping carton and packing materials will come in handy if you ever have
to ship your LCD projector. For maximum protection, repack the set as it was originally
packed at the factory.
Moisture Condensation
Never operate this unit immediately after moving it from a cold location to a warm
location. When the unit is exposed to such a change in temperature, moisture may
condense on the crucial internal parts. To prevent the unit from possible damage, do not
use the unit for at least 2 hours when there is an extreme or sudden change in
temperature.
Place and Manner of Installation
• Do not place in hot locations, such as near heating equipment. Doing so could cause
malfunction, and shorten the life of the LCD panel.
• Avoid locations with oil or cigarette smoke. Doing so will dirty the LCD panel and other
optical parts, shortening their lives, and darkening the screen.
• Do not use in angle of 20° or more degrees. Doing so could shorten the life of the
lamp.
• If used at high altitudes, the unit could cease operation even if used within the rated
temperature range. This is because the thinner air at high altitudes decreases the
internal cooling efficiency. Therefore, please lower the ambient temperature if using at
high altitudes.
Plug
configuration Plug type Line voltage
200 - 240V
Downloaded From projector-manual.com Toshiba Manuals

8
Before Using (continued)
Before Using (continued)
IMPORTANT PRECAUTIONS (continued)
Avoid Volatile Liquid
Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or
plastic products touching the unit for a long time. They will leave marks on the finish. If
cleaning with a chemically saturated cloth, be sure to follow the product's precautions.
LCD Panel
The life of the LCD panel is limited. Take care over the points below so as to use the
panel for years.
• To prolong the life of this panel, never fail to turn the power off when the panel is not in
use and make sure that the lamp has gone out. The state of the lamp being
extinguished helps enhance the effect of energy saving.
• If the air filter is stained and is clogged up, the main unit inner temperature rises. As a
result, the life of the LCD is shortened and a malfunction may also occur. Clean the air
filter from time to time and replace it regularly. It is recommended that this replacement
be done at the time of replacing a lamp. (Ask a dealer where the unit was purchased or
your nearby service station about an air filter for replacement.)
In the spaces provided below, record the Model and Serial No. located at the bottom of
your LCD projector.
Model No. Serial No.
Retain this information for future reference.
Downloaded From projector-manual.com Toshiba Manuals

9
Before Using (continued)
Before Using (continued)
EXEMPTION CLAUSES
• Toshiba Corporation bears no responsibility in the case of damages arising from natural
disaster such as earthquakes, lightning, etc., fire not liable to Toshiba Corporation,
operating by third parties, other accidents, or use under abnormal conditions including
erroneous or improper operation and other problems.
• Toshiba Corporation bears no responsibility for incidental damages (lost profit, work
interruption, corruption or loss of the memory contents, etc.) arising from the use of or
the inability to use this unit.
• Toshiba Corporation accepts no liability whatsoever for any damages arising from not
having followed the descriptions in this Instruction Manual.
• Toshiba Corporation accepts no liability whatsoever for any damages arising from
malfunctions arising from combination with equipment or software that is not related to
Toshiba Corporation.
OTHER CAUTIONS AND INFORMATIONS
Copyrights
Publicly showing or transmitting commercial imaging software or broadcast or Cable-
broad casting programs, either commercially or collecting a fee from the audience, or
modifying images using the freeze or resize functions, could violate the direct or indirect
copyrights of the imaging software or broadcast program, etc., if done without first
consulting with the copyright holder. For this reason, please take appropriate measures
before performing one of the actions listed above, including obtaining a license from the
copyright holder.
Disposal
This product contains substances which are harmful to humans and the environment.
• The solder used in the PCB manufacturing process contains lead.
• The lamp contains inorganic mercury.
Please dispose of this product or used lamps in accordance with local regulations.
Downloaded From projector-manual.com Toshiba Manuals

10
Projector Features
Projector Features
Preparation
Preparation
●
Ultra High Brightness
Crisp, ultra-bright presentations is achieved by using an ultra high brightness lamp and a highly
efficient optical system.
●
Whisper Mode Equipped
Special mode is available for reducing projector noise to achieve quieter operation.
●
User Memory Function
This projector can memorize 4 settings by MY MEMORY function.
●
Partial Magnification Function
Interesting parts of images can be magnified for closer viewing.
●
Keystone Distortion Correction
Quick correction of distorted images electrically.
●
Optical Lens Shift
The lens of this projector can be shifted vertically. When you want to finely adjust the picture position,
use the LENS SHIFT buttons.
This multimedia projector is used to project various computer signals as well as
NTSC/PAL/SECAM video signals onto a screen. Little space is required for
installation and large images can easily be realized.
Please see the “Contents Of Package” of the “User’s Manual – Quick Guide”.
Your projector should come with the items shown there. Contact your dealer
anything is missing.
• Keep the original packing material for future reshipment. For moving the projector, be
sure to use the original packing material. Use special caution for the lens part.
NOTE
Downloaded From projector-manual.com Toshiba Manuals

11
Contents
Contents
Before Using ………………………………………………2
SAFETY PRECAUTIONS ………2
IMPORTANT SAFETY
INSTRUCTIONS …………………3
POWER SUPPLY CORD
SELECTION ………………………7
IMPORTANT PRECAUTIONS …7
EXEMPTION CLAUSES …………9
OTHER CAUTIONS AND
INFORMATIONS …………………9
Projector Features ………………………………10
Preparation……………………………………………………10
Part Names ……………………………………………………12
Projector …………………………12
Control Buttons …………………13
Remote control……………………13
Setting Up ……………………………………………………14
Arrangement………………………14
Adjusting The Projector’s
Elevator……………………………15
Using The Lens shift Buttons …15
Connecting Your Devices ………16
Connecting The Power Supply …19
Remote Control …………………………………………20
About The Laser Pointer ………20
Loading Batteries ………………20
Operating The
Remote Control …………………21
Using The Remote
ID Feature…………………………21
Using The Mouse/Keyboard
Control Function …………………22
Power ON/OFF …………………………………………23
Turning On The Power …………23
Turning Off The Power …………23
Operating ……………………………………………………24
Selecting An Input Signal ………24
Selecting The Aspect Ratio ……25
Using The Automatic
Adjustment Feature………………25
Adjusting The Picture Position …26
Correcting The Keystone
Distortion …………………………26
Adjusting The Volume …………27
Muting The Sound ………………27
Temporarily Blanking
The Screen ………………………27
Freezing The Screen ……………28
Using The Magnify Feature ……28
Displaying The Child Window …29
Selecting An Audio Input ………29
Multifunctional Settings ……………………30
Using The Menu Functions ……30
MAIN Menu ………………………31
PICTURE-1 Menu ………………32
PICTURE-2 Menu ………………34
INPUT Menu………………………35
AUTO Menu ………………………37
SCREEN Menu …………………39
OPTION Menu ……………………41
NETWORK Menu ………………43
Network Setting Up ………………………………44
Lamp ………………………………………………………………45
Replacing The Lamp ……………46
Air Filter …………………………………………………………47
Caring For The Air Filter…………47
Other Care ……………………………………………………48
Caring For The Inside Of
The Projector ……………………48
Caring For The Lens ……………48
Caring For The Cabinet And
Remote Control …………………48
Troubleshooting ……………………………………49
Related Messages ………………49
Regarding The Indicator Lamps …51
Phenomena That May Easily Be
Mistaken For Machine Defects …53
Warranty And After-Service …………55
Specifications …………………………………………55
TECHNICAL
Downloaded From projector-manual.com Toshiba Manuals

12
Part Names
Part Names
Projector
1Elevator button
2Elevator foot
3Remote sensor
4Lens cap
5Lens
The picture is projected from
here.
6Filter cover
An air filter is inside.
ARGB port
BM1-D port
CBNC port
DAUDIO IN 1 port
EAUDIO IN 2 port
FCONTROL port
GNETWORK port
HAUDIO IN R/L port
IVIDEO IN port
JS-VIDEO port
KCOMPONENT port
LRGB OUT port
MAUDIO OUT port
7REMOTE CONTROL port
8DC OUT port
9AC Inlet
0Power switch
-Control buttons
See the following page.
Projector (Front/Right)
Projector (Rear/Left)
INTER
INPUT
M1-D
RGB
BNG
S-VIDEO
STANDBY/ON
TEMP
VIDEO
COMPONENT
LAMP
KEYSTONE
SEARCH
RESET
MENU
FOCUS
LENSSHIFTZOOM
1
2
3
5
4
6
INTER
INPUT
M1-D
RGB
BNG
S-VIDEO
STANDBY/ON
TEMP
VIDEO
COMPONENT
LAMP
KEYSTONE
SEARCH
RESET
MENU
FOCUS
LENS SHIFT ZOOM
VIDEO
R-AUDIO IN-L S-VIDEO
BNC
RGB
AUDIO IN1
AUDIO IN2 RGB OUT
AUDIO OUT
REMOTE CONTROL
R/C
R
/P
R
G/Y B/C
B
/P
B
HV
Y
CONTROLNETWORK
C
R
/P
R
C
B
/P
B
7
8-
LF
A
D
E
CM
HIJ
K
G3
09
B
Downloaded From projector-manual.com Toshiba Manuals

INTER
INPUT
M1-D
RGB
BNG
S-VIDEO
STANDBY/ON
TEMP
VIDEO
COMPONENT
LAMP
KEYSTONE
SEARCH
RESET
MENU
FOCUS
LENSSHIFTZOOM
STANDBY/ON VIDEO
LASER INDICATOR
ESC MENU
POSITION RESET AUTO
KEYSTONE
1 2 3
ID CHANGE
SEARCH
ON
OFF
FREEZE MUTE
MAGNFY PinP VOLUME
RGB
BLANK
PREVIOUS NEXT
ASPECT
MOUSE
LASER
LENS SHIFT
+
–––
++
FOCUS ZOOM
1
4
w
u
r
s
f
h
j
k
e
q
io
p
[
\
]
d
t
g
l
;
6
a
'
13
Part Names (continued)
Part Names (continued)
Remote Control
Control Buttons
1
e
w q
4
7
8
9
0
-
=
2
5
6
t
y
u
3
r
1STANDBY/ON button
and STANDBY/ON indicator
2TEMP indicator
3LAMP indicator
4LENS SHIFT buttons
5INPUT dial
6SEARCH button
7M1-D indicator
8RGB indicator
9BNC indicator
0COMPONENT indicator
-S-VIDEO indicator
=VIDEO indicator
qZOOM buttons
wFOCUS buttons
eKEYSTONE button
rMENU button
tRESET button
yENTER button
uCursor buttons / / /
Control Panel
on the Projector
Remote Control
iLASER INDICATOR
oVIDEO button
pRGB button
[BLANK button
]ASPECT button
\LASER button
aCursor buttons / / /
(Mouse move pointer)
sESC button
(Keyboard ESC key)
d(Mouse right button)
fPOSITION button
gAUTO button
hPinP button
jMAGNIFY buttons
kFREEZE button
lVOLUME button
;MUTE button
'ID CHANGE switch
1STANDBY/ON button
4LENS SHIFT buttons
6SEARCH button
qZOOM buttons
wFOCUS buttons
eKEYSTONE button
rMENU button
tRESET button
yENTER button
(Mouse left button)
uCursor buttons
///
(Keyboard
Arrow keys / / / )
y
(Rear)
Downloaded From projector-manual.com Toshiba Manuals

14
Setting Up
Setting Up
Arrangement
WARNING • Before installation, make sure that the projector is turned off and the
power code is disconnected.
• Do not set up and move the projector, while it is hot.
• Install the projector in a suitable environment according to instructions of this manual.
• The power outlet should be close to the projector and easily accessible.
Refer to the illustrations and tables below to determine the screen size and projection
distance. The values shown in the table are calculated for a full size screen. (±10%)
Reference for
the 4:3 aspect ratio
A
[inch (m)]
B
[inch (cm)]
C[inch (m)] D[inch (cm)]
min. max. min. max.
40(1.0) 24(61) 46(1.2) 71(1.8) 12(30) 24(61)
60(1.5) 36(91) 71(1.8) 107(2.7) 18(46) 36(91)
70(1.8) 42(107) 83(2.1) 126(3.2) 21(53) 42(107)
80(2.0) 48(122) 95(2.4) 144(3.7) 24(61) 48(122)
100(2.5) 60(152) 120(3.0) 181(4.6) 30(76) 60(152)
120(3.0) 72(183) 144(3.7) 217(5.5) 36(91) 72(183)
150(3.8) 90(229) 181(4.6) 272(6.9) 45(114) 90(229)
200(5.1) 120(305) 243(6.2) 364(9.2) 60(152) 120(305)
250(6.4) 150(381) 304(7.7) 455(11.6) 75(191) 150(381)
300(7.6) 180(457) 366(9.3) 547(13.9) 90(229) 180(457)
350(8.9) 210(533) 427(10.9) 638(16.2) 105(267) 210(533)
400(10.2) 240(610) 489(12.4) 730(18.5) 120(305) 240(610)
500(12.7) 300(762) 612(15.5) 913(23.2) 150(381) 300(762)
A
[inch (m)]
B
[inch (cm)]
C[inch (m)] D[inch (cm)]
min. max. min. max.
40(1.0) 20(50) 50(1.3) 77(2.0) 10(25) 23(58)
60(1.5) 29(75) 77(2.0) 117(3.0) 15(37) 34(87)
70(1.8) 34(87) 91(2.3) 137(3.5) 17(44) 40(102)
80(2.0) 39(100) 104(2.6) 157(4.0) 20(50) 46(116)
100(2.5) 49(125) 131(3.3) 197(5.0) 25(62) 57(145)
120(3.0) 59(149) 158(4.0) 237(6.0) 29(75) 69(174)
150(3.8) 74(187) 198(5.0) 297(7.5) 37(93) 86(218)
200(5.1) 98(249) 265(6.7) 396(10.1) 49(125) 114(291)
250(6.4) 123(311) 332(8.4) 496(12.6) 61(156) 143(363)
300(7.6) 147(374) 399(10.1) 596(15.1) 74(187) 172(436)
350(8.9) 172(436) 466(11.8) 696(17.7) 86(218) 200(508)
400(10.2) 196(498) 533(13.5) 795(20.2) 98(249) 229(581)
450(11.4) 221(560) 600(15.2) 895(22.7) 110(280) 257(654)
D
B
C
A
B
Screen
Side view
Reference for
the 16:9 aspect ratio
D
B
C
A
B
Screen
Side view
Downloaded From projector-manual.com Toshiba Manuals

INTER
INPUT
M1-D
RGB
BNG
S-VIDEO
STANDBY/ON
TEMP
VIDEO
COMPONENT
LAMP
KEYSTONE
SEARCH
RESET
MENU
FOCUS
LENSSHIFTZOOM
15
Setting Up (continued)
Setting Up (continued)
Adjusting The Projector's Elevator
Using The Lens Shift Buttons
You can use the elevator feet to make adjustments if the surface on which you need to set
the projector is uneven or if you otherwise need to adjust the angle of projection. The
adjustment range of the elevator feet is 0 to 9 degrees.
WARNING • Do not touch about the lens and ventilation openings during use or
immediately after use to prevent a burn.
CAUTION •
Do not incline the projector rightward or leftward. Also do not incline
it backward or forward exceeding 9 degrees. Exceeding these range could cause
malfunction, and could shorten the lifetime of the consumables.
• To prevent damaging the projector and injuring yourself, always hold the projector
whenever using the elevator buttons to adjust the elevator feet.
Press and hold in the elevator buttons.
Raise or lower the projector to the desired height and
then release the elevator buttons.
When you release the elevator buttons, the elevator
feet will lock into position.
As necessary, you can also finely adjust the height of
the projector by twisting the elevator feet by hand.
Elevator buttons
Elevator feet
The lens of this projector can be shifted
vertically. When you want to finely adjust the
picture position, use the LENS SHIFT buttons
of the projector.
1
2
3
STANDBY/ON VIDEO
LASER INDICATOR
RGB
BLANK ASPECT LASER
LENS SHIFT
+
–––
++
FOCUS ZOOM
Projector
LENS SHIFT buttons
Remote control
Downloaded From projector-manual.com Toshiba Manuals

16
Setting Up (continued)
Setting Up (continued)
Connecting Your Devices
WARNING • Whenever attempting to connect other devices to the projector, read
thoroughly, this manual and the manual of each device to be connected. Incorrect
connecting could result in fire or electrical shock.
CAUTION • TURN OFF ALL DEVICES prior to connecting them to the projector.
Attempting to connect a live device to the projector may generate extremely loud
noises or other abnormalities that may result in malfunction and/or damage to the
device and/or projector.
ATTENTION •
Make sure that you connect devices to the correct port. Incorrect connection
may result in malfunction and/or damage to the device and/or projector. Refer to the section
“Technical” of this manual for the pin assignment of connectors and RS-232C communication data.
• Some cables have to be used with core set. Use the accessory cable or a designated-type cable
for the connection. For cables that have a core only at one end, connect the core to the projector.
• Secure the screws on the connectors and tighten.
• Whenever attempting to connect a laptop computer to the projector, be sure to
activate the laptop’s RGB external image output (set the laptop to CRT display or to
simultaneous LCD and CRT display). For details on how this is done, please refer to
the instruction manual of the corresponding laptop computer.
• Some computers may have multiple display screen modes. Use of some of
these modes may not be compatible with this projector.
• For some RGB input modes, the optional Mac adapter is necessary.
• When the image resolution is changed on a computer, depending on an input,
automatic adjust function may take some time and may not be completed. In this
case, you may not be able to see a check box to select “Yes/No” for the new
resolution on Windows. Then the resolution will go back to the original. It might be
recommended to use other CRT or TFT monitors to change the resolution.
NOTE
Plug-and-Play Capability
• Plug-and-Play is a system incorporated in the computer, its operating system and
peripheral equipment (i.e. display devices).
•
This projector is compatible with VESA DDC 2B. Plug-and-Play can be achieved by
connecting this projector to computers that are VESA DDC (display data channel) compatible.
• Please take advantage of this function by connecting the accessory RGB cable to the
RGB port (DDC 2B compatible). Plug-and-Play may not work properly if any other
type of connection is attempted.
•
Please use the standard drivers in your computer as this projector is a Plug-and-Play monitor.
• The TLP-SX3500's M1-D is compatible with HDCP (High-bandwidth Digital Content
Protection) and therefore capable od displaying video from HDCP compatible DVD
players, et al. However, if the HDCP standards are modified, the TLP-SX3500's M1-D
might not be able to display video from HDCP compatible developed in conformance
to such modified HDCP standards.
NOTE
Downloaded From projector-manual.com Toshiba Manuals

17
Setting Up (continued)
Setting Up (continued)
Please refer to the following (for example) for connecting your devices. See the rear of the projector.
You can see the ports.
INTER
INPUT
M1-D
RGB
BNG
S-VIDEO
STANDBY/ON
TEMP
VIDEO
COMPONENT
LAMP
KEYSTONE
SEARCH
RESET
MENU
FOCUS
LENSSHIFTZOOM
VIDEO
R-AUDIOIN-LS-VIDEO
BNC
RGB
AUDIOIN1
AUDIOIN2 RGB OUT
AUDIOOUT
REMOTECONTROL
R/C
R
/P
R
G/Y B/C
B
/P
B
HV
Y
CONTROL NETWORK
CR/PR Ca/Pa
R/CR/PRG/Y B/CB/PBH V
Examples of connection with a computer
VIDEOR-AUDIO IN-L S-VIDEO
BNC
RGB
AUDI O IN1
AUDI O IN2 RGB OUT
AUDI O OUT
REMOTE CONTROL
R/CR/PRG/Y B/CB/PBHV
Y
CONTROL NETWORK
CR/PRCB/PB
A
E
F G
CR/PRCB/PB
REMOTE CONTROL
VIDEOR-AUDIO IN-L S-VIDEO
BNC
RGB
AUDI O IN1
AUDI O IN2 RGB OUT
AUDI O OUT
G/Y H V
Y
CONTROL NETWORK
R/CR/PRB/CB/PB
B
D
CR/PRCB/PB
REMOTE CONTROL
VIDEOR-AUDIO IN-L S-VIDEO
BNC
RGB
AUDI O IN1
AUDI O IN2 RGB OUT
AUDI O OUT
R/CR/PRG/Y B/CB/PBHV
Y
CONTROL NETWORK
C
D
Computer Projector
RGB out RGB cable RGB
Audio out Stereo Mini cable AUDIO IN 2
RS-232C port RS-232C cable CONTROL
Network port CAT-5 cable NETWORK
■If using a M1-D input (to mouse control)
■If using a BNC input
DVI port M1-D
USB port M1-D cable
Audio out Stereo Mini cable AUDIO IN 1
BNC cable
RGB out
R/CR/PR
G/Y
B/CB/PB
H
V
C
D
B
G
F
E
A
D
Audio out Stereo Mini cable AUDIO IN 1
Downloaded From projector-manual.com Toshiba Manuals

18
Setting Up (continued)
Setting Up (continued)
CR/PRCB/PB
VIDEOR-AUDIO IN-L S-VIDEO
BNC
RGB
AUDI O IN1
AUDI O IN2 RGB OUT
AUDI O OUT
R/CR/PRG/Y B/CB/PBHV
Y
CONTROL NETWORK
REMOTE CONTROL
H I
CR/PRCB/PB
REMOTE CONTROL
VIDEOR-AUDIO IN-L S-VIDEO
BNC
RGB
AUDI O IN1
AUDI O IN2 RGB OUT
AUDI O OUT
R/CR/PRG/Y B/CB/PBHV
Y
CONTROL NETWORK
H J
CR/PRCB/PB
REMOTE CONTROL
VIDEOR-AUDIO IN-L S-VIDEO
BNC
RGB
AUDI O IN1
AUDI O IN2 RGB OUT
AUDI O OUT
R/CR/PRG/Y B/CB/PBHV
Y
CONTROL NETWORK
H
K
VCR/DVD Player Projector
■If using a s-video signal
■If using a component signal
R-AUDIO IN-L VIDEO
R-AUDIO IN-L VIDEO
CR/PRCB/PBY
S-video out S-video cable S -VIDEO
J
CR/PR
CB/PB
Y
CR/PRout
CB/PBout
Y out
R-AUDIO IN-L VIDEO
R-AUDIO IN
AUDIO IN-L
Audio out (R)
Audio out (L)
Audio out (R)
Audio out (L)
R-AUDIO IN
AUDIO IN-L
R-AUDIO IN
AUDIO IN-L
VIDEO IN
Audio out (R)
Audio out (L)
Video out
H
H
K
H
CR/PRCB/PB
REMOTE CONTROL
VIDEOR-AUDIO IN-L S-VIDEO
BNC
RGB
AUDI O IN1
AUDI O IN2 RGB OUT
AUDI O OUT
R/CR/PRG/Y B/CB/PBHV
Y
CONTROL NETWORK
HI
K
■If using a SCART RGB input
R-AUDIO IN-L VIDEO
CR/PRCB/PBY
R (CR/PR)
B (CB/PB)
G (Y)
R-AUDIO IN
AUDIO IN-L
VIDEO IN
SCART
RGB out
SCART
adapter
K
I
H
I
Examples of connection with a VCR/DVD Player
Downloaded From projector-manual.com Toshiba Manuals

INTER
INPUT
M1-D
RGB
BNG
S-VIDEO
STANDBY/ON
TEMP
VIDEO
COMPONENT
LAMP
KEYSTONE
SEARCH
RESET
MENU
FOCUS
LENSSHIFTZOOM
VIDEO
R-AUDIOIN-L S-VIDEO
BNC
RGB
AUDIOIN1
AUDIOIN2 RGB OUT
AUDIOOUT
REMOTECONTROL
R/C
R
/P
R
G/Y B/C
B
/P
B
HV
Y
CONTROL NETWORK
CR/PR Ca/Pa
19
Setting Up (continued)
Setting Up (continued)
CR/PRCB/PB
REMOTE CONTROL
VIDEOR-AUDIO IN-L S-VIDEO
BNC
RGB
AUDI O IN1
AUDI O IN2 RGB OUT
AUDI O OUT
R/CR/PRG/Y B/CB/PBHV
Y
CONTROL NETWORK
L
CR/PRCB/PB
REMOTE CONTROL
VIDEOR-AUDIO IN-L S-VIDEO
BNC
RGB
AUDI O IN1
AUDI O IN2 RGB OUT
AUDI O OUT
R/CR/PRG/Y B/CB/PBHV
Y
CONTROL NETWORK
M
Monitor Projector
RGB in RGB cable RGB OUT
Connecting to a monitor
Speaker Projector
Connecting to a speaker (with amplifier)
Audio in Stereo Mini cable AUDIO OUT
M
L
WARNING • Use extra caution when connecting the power cord as incorrect or faulty
connections may result in fire and/or electrical shock. Please adhere to the “Before using”
section of this manual and the following.
• Only plug the power cord into outlets rated for use with the power cord’s specified voltage range.
• Only use the power cord that came with the projector. If it is damaged, contact your dealer to
newly get correct one.
• Never modify the power cord.
•
Make sure that you firmly connect the power cord to the projector and wall outlet.
1Connect the connector of the power cord to
the AC inlet of the projector.
2Firmly plug the power cord’s plug into the
outlet. AC Inlet
Connector Plug
Outlet
Connecting The Power Supply
Downloaded From projector-manual.com Toshiba Manuals

20
Remote Control
Remote Control
About The Laser Pointer
Loading Batteries
WARNING • The laser pointer of the remote control is used in place of a finger or
rod. Never look directly into the laser beam outlet or point the laser beam at other
people. The laser beam can cause vision problems.
CAUTION •Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
STANDBY/ON
VIDEO
LASER INDICATOR
ESC MENU
POSITION
RESET AUTO
KEYSTONE
1 2 3
ID CHANGE
SEARCH
ON
OFF
FREEZE MUTE
MAGNFY
PinP
VOLUME
RGB
BLANK
PREVIOUS
NEXT
ASPECT LASER
LENS SHIFT
+
–––
++
FOCUS ZOOM
MOUSE
JQA
MADE IN CHINA
P S
C
レーザー光をのぞき込まないこと。
レーザー光を人に向けないこと。
子供に使わせないこと。
製造者：INTERLINK ELECTRONICS
This remote control has a laser pointer in place of a finger or rod. The laser beam works and the
LASER INDICATOR lights while the LASER button is pressed.
CAUTION About the battery
• Keep a battery away from children and pets.
• Use only the battery specified: two AA batteries.
• Do not mix new battery with used one.
• Make sure the plus and minus terminals are correctly aligned when loading the
battery (as indicated in the remote control).
• Dispose of batteries in accord with environmental laws.
1Remove the battery
cover.
Slide back and
remove the battery
cover in the direction
of the arrow.
Insert the batteries.
Align and insert the
two AA batteries
according to their plus
minus terminals (as
indicated in the remote
control).
Close the battery
cover.
Replace the battery
cover in the direction
of the arrow and snap
it back into place.
23
AVOID EXPOSURE-LASER
RADIATION IS EMITTED
FROM THIS APERTURE
CAUTION
WAVE LENGTH: 640-660nm
MAX OUTPUT: 1mW
CLASS 2 LASER PRODUCT
Comples with 21 CFR, 1040.10 AND 1040.11
IEO60825-1:1993+A1:1997+A2:2001
LASER-STRAHLING
NICHT IN DEN STRAHL BLICKEN
LASER KLASSE 2
WAVE LENGTH:640-660nm MAX OUTPUT:1mW
レーザー光
ビームをのぞきこまないこと
クラス2レーザー製品 JISC6802（1998）
最大出力：1.0mW 波長：640−660nm
MODEL:H-IRC4
LASER RADIATION
DO NOT STARE INTO BEAM
MANUFACTURER: B
MANUFACTURED
JANUARY,2003
INTERLINK K.K.
1-10-7 HIGASHIKANDA CHIYODA-KU,TOKYO,JAPAN
101-0031 MADE IN CHINA
Downloaded From projector-manual.com Toshiba Manuals