Toshiba DP5022F-SD User manual

How to use your new phone
Manufacturer: Toshiba
Model: DP5022F-SD
Description: Digital business telephone with 4-line LCD display.
Hearing Aid Compatible

This page left intentionally blank

Contents
oPhone layout
oAdjust the angle of the phone
oButton overview
oMaking a call
oAnswering a call
oFunctions during a call
oOther functions
oLift emergency

This page left intentionally blank

Phone Layout
Incoming Call Light
Night Service
Day / Date / Time
Incoming BT Lines
Microphone Button
Speaker Button
Volume Up/Down
Intercom Button
Phone Extension Name Phone Extension No.
Redial Button Transfer Button Hold Button

Adjust the angle of the phone
1 Press and hold the adjustment bar at the rear 2 Rotate the phone to the desired angle,
then release the adjustment bar

Button Overview
Button Function / Operation
Microphone
•This toggles between Microphone and Mute.
•When this key is lit you can use the phone handsfree.
•When the button is pressed the red light goes off and
the microphone in the telephone AND the handset are
both muted
Speaker
•Press to toggle the Speaker on/off during a call.
•To start a handsfree call; press the speaker button, to
end the call press the button again
Volume
•Press and release the volume control to adjust the
volume level one step at a time.
Redial
•Press this button to redial the last number called
(internal extension or external number)
•Note: External numbers must be prefixed with a ‘9’ for
this to work, if an external line is selected manually the
redial function will not be able to dial an external
number.
Transfer
•Press this button during a conversation places the call
in to the transfer waiting state
•Dial the extension you require
•When the extension answers, announce the caller and
then hang up
•If the person on the extension doesn’t want the call,
wait for them to hang up and the caller will be returned
to you
•If there is no reply press the flashing green button to
retrieve the caller to your phone
Hold
•Press this button to place an internal or external call on
hold. The line light flashes slowly.
•This will mute the microphone and the speaker until the
call is retrieved.
•To retrieve the call on the same phone lift the handset
and then press the flashing green light.
•To retrieve the call from another phone lift the handset
and then press the flashing red light.
Exclusive Hold
+
•Press this button twice to place an internal or external
call on exclusive hold. The line light flashes quickly.
•This will mute the microphone and the speaker until the
call is retrieved.
•The call can only be retrieved from the phone where it
was placed on exclusive hold by pressing the flashing
green light.

Making a Call
There are three ways to make a call from your digital telephone:
oHot dialling
oSpeaker Button
oHandset
“Hot Dialling”
•Just dial the extension number you want, which will
be shown on the display as you dial, or to make an
external call press “9” before dialling the number
you require.
•When you start to dial the Intercom, Speaker and
Microphone buttons light up.
•Call progress can be heard through the speaker.
•When connected, you can continue the call via the
speakerphone or lift the handset and continue the
conversation using the handset.
Speaker Button
•Press the speaker button.
•Dial tone plays through the speaker and the
Intercom, Speaker and Microphone buttons light
up.
•Dial the extension number you want, which will be
shown on the display as you dial, or to make an
external call press “9” before dialling the number
you require. Call progress can be heard through the
speaker.
•When connected, you can continue to use the
speakerphone or lift the handset and continue the
conversation.
Handset
•Lift the handset, and then dial the extension
number you want, which will be shown on the
display as you dial. To make an external call press
“9” before dialling the number you require.
•Dial tone plays through the handset earpiece.
•The Speaker and Microphone LED’s do not light.
•The number you dial will be shown on the display.
•When connected, you can continue to use the
handset or switch to the speakerphone by pressing
the Speaker button and then replacing the handset.
To summon the emergency services -
DIAL 9 then 999

Answering a Call
There are three ways to answer a call:
Handset
•Pick up the handset and the telephone
automatically answers the ringing line.
•On some phones you may have to press the button
associated with the ringing line (flashing green
LED).
Speaker Button
•Press the Speaker button and the telephone
automatically answers the ringing line.
•On some phones you may have to press the button
associated with the ringing line (flashing green
LED).
•Once connected, you can continue on the
speakerphone or lift the handset.
Intercom Button
•Press the flashing green Intercom button and the
telephone automatically answers the call.
•Once connected, you can continue on the
speakerphone or lift the handset.

Functions During a Call
Functions available during a call are:
Transfer
•Press this button during a conversation places the
call in to the transfer waiting state
•Dial the extension number you require
•When the extension answers, announce the caller
and then hang up
•If the person on the extension doesn’t want the
call, wait for them to hang up and the caller will be
returned to you
•If there is no reply press the flashing green button
to retrieve the caller to your phone
Hold
•Press this button to place an internal or external
call on hold. This will mute the microphone and the
speaker until the call is retrieved.
•To retrieve the call on the same phone lift the
handset and then press the flashing green light.
•To retrieve the call from another phone lift the
handset and then press the flashing red light.
Volume
Handset
•During the call to adjust the handset volume press
the Vol ▲to increase volume or Vol ▼to decrease
volume. When you hang up, the volume returns to
the default setting.
Speaker
•To adjust the speaker volume for internal/external
calls, whilst listening to the caller via the
speakerphone -
oPress the Vol ▲to increase volume and Vol ▼
to decrease volume. This volume setting
applies to all calls until changed again.

Other Functions
With the phone in its normal mode, other functions available are:
Night Service
During the day there are only specific phones that ring
when an incoming call is received on an external line,
that way care staff don’t have to deal with incoming
calls.
When reception is unmanned at night, then the
following procedure should be used from the reception
phone (normally only extension 200) -
1. Press the Night Service button
2. Press “3”
3. The light on the Night Service button will now be
illuminated
4. Incoming calls will now ring multiple phones
throughout the building, including the DECT
cordless phones
To deactivate the Night Service function from the
reception phone –
1. Press the Night Service button
2. Press “1”
3. The light on the Night Service button will now go
off
4. Incoming calls will now only ring specific
phones, e.g. reception and admin
Ringer Volume
•To adjust the ringer volume –
oPress and hold the Vol ▲to increase ringer
volume or Vol ▼to decrease the ringer volume.
oRelease the button at the desired volume level
Answer the
front door
•Depending on the layout of the property the phone
display will show the caller ID as
“Front door” or
“Inner door” or
“Outer door”
•Once you have spoken to the visitor you can then
unlock the door from the telephone by slowly
pressing the #button 3 times, i.e.
#(pause)
#(pause)
#
•You will hear the intercom unit beep in the earpiece
once it accepts the door open command (# # #)
•Now hang up the phone by replacing the handset.

Lift Emergency
Notes for the lift emergency call system –
•When the emergency “Bell” button in the lift is pressed, the lift will
automatically dial several phones within the building.
•If you answer the call there will be a couple of seconds’ silence followed
by a pre-recorded message that you should listen to.
•The once the message has finished, after a couple of seconds there will
be a “beep”. YOU MUST PRESS THE “ *” BUTTON AT THIS POINT!
•This is an acknowledgement to the lift that someone has answered the
call. If you don’t press the “ *” button the lift will call you repeatedly
until you do!
•Once you have acknowledged the call you can have a two way
conversation with the person trapped in the lift to offer reassurance that
help is on the way.
•When you have finished talking to the person in the lift, YOU MUST
PRESS THE “ 0” BUTTON BEFORE YOU HANG UP!
•If you don’t the lift will repeat the entire process from the beginning and
call you repeatedly until you do!
FOR DETAILED INSTRUCTIONS ON HOW TO DEAL WITH AN
EMERGENCY CALL FROM THE LIFT, PLEASE REFER TO THE
INSTRUCTIONS FROM THE LIFT MANUFACTURER