Total TS3006 User manual

TS3006,UTS3006,TS3006-6,TS3006-8,TS3006S
300W
MULTI-FUNCTION TOOLS
SCAN FOR VIDEO TOTAL TOOLS WORLD

2
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
2. SPECIFICATIONS
3. SAFETY INSTRUCTIONS
Indicates danger of injury, risk to life and possible damage to the appliance if these instructions are not followed.
Indicates the presence of electric shocks.
Always check if your mains voltage corresponds with the value on the type plate
USE CORRECT SUPPLY VOLTAGE:
USEPROPER EXTENSION CORD:
SWITCH OFF THE MACHINE IMMEDIATELY IN CASE OF:
The symbols in instruction manual and the label on the tool
4. GENERAL SAFETY RULES
Save all warnings and instructions for future reference.
1) Workareasafety
Keep work area clean and well lit Cluttered or dark areas invite accidents.
/ /

3
Do notoperate power tools in explosive atmospheres, such as in the presence
of flammableliquids, gases or dust.Power tools create sparks which may ignite the dust or fumes.
Keep children and bystanders away whileoperating a power tool.Distractions
can cause you to lose control.
d)Keep bystanders a safedistance away from work area. Anyoneentering the work area must wear
personal protectiveequipment.
2) Electrical safety
Power tool plugsmust matchtheoutlet. Never modify the plug in any way. Do not use any adapter
plugswithearthed(grounded) power tools.Unmodified plugs andmatching outlets will reduce risk of
electric shock.
Avoidbodycontact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if yourbody is earthed or grounded.
Do notexpose powertools to rain or wet conditions.Waterentering a power tool will increase the risk
of electric shock.
Do notabuse the cord. Never usethecord for carrying, pulling or unpluggingthepowertool. Keep
cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cordsincrease the risk of electric shock.
Whenoperating a powertooloutdoors, use an extensioncordsuitable for outdoor use.Use of a
cord suitable foroutdoor use reduces the risk of electric shock.
If operating a powertool in a damp location is unavoidable, use a residual current device (RCD)
protectedsupply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
Stay alert, watch what you are doing and use commonsensewhenoperating a power tool. Do not
use a powertool while you are tired or under the influence of drugs, alcohol or medication.Amoment
of inattention while operating power tools may result in seriouspersonal injury.
Wearpersonal protective equipment. Depending on application, use face shield, safety goggles or
safety glasses. As appropriate, wear dust mask, hearing protections,gloves and workshop apron
capable of stopping small abrasive or workpiece fragments.

4
6. HOW TO USE MULTI-TOOL
Before setting up, repair or maintenance of the appliance you must always turnoff theoperating switch andpullout
the mainsplug!
Before Initial Operation
6.1Multi-function Tools
6.2Howtomounttheaccessories
6.3 Turn
6.4 Install dust collection
on/off machine
Delta-sanding

TS3006,UTS3006,TS3006-6,TS3006-8
TS3006S Exploded view
5
7. CARE AND MAINTENANCE
Remove the plug from the socket before carrying outanyadjustment,servicing or maintenance.
Yourpower tool requires no additional lubrication or maintenance. Always store yourpower tool in a dry place.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.If a fault can not be rectified,return the mixer to an authorized dealer for repair.
Cleaning
Carbon brushes
8. CORRECTIVE ACTION IN CASE OF FAILURE
Have the switch replaced.
Have the switch replaced.
Have the electric tool checked or repaired.
Have lubricating grease applied or replaced.
Use less thrust during the task
Have the armature replaced.
Have the carbon brushes checked.
Have the surface of the commutator cleaned or ground.
6.2

6
TS3006,UTS3006,TS3006-6,TS3006-8
TS3006S Spare part list
ytQ.oN ytQ.oN
Part Description Part Description

T0322.V05
MADE IN CHINA
www.totalbusiness.com
TOTAL TOOLS CO., PTE. LTD.
No. 45 Songbei Road, Suzhou Industrial Park, China.
300W
MULTI-FUNCTION TOOLS