Toto PJY1804HPWE User manual

Bathtub
NTE026
Installation Manual
2013.12
Please install the product properly ,in accordance with the descriptions in this manual
so that full use can be made of the product’s functions.
After installing the product,please tell the customer how to use the product fully.
Thank you for choosing to use the TOTO BATHTUB on this occasion.
Please install the product properly, in accordance with the descriptions in this manual so that
full use can be made of the product's functions.
After completing the construction, please explain the operation to the customer and give this
Installation Manual and the accompanying "Instruction Manual" to the customer.
Note also: Please be sure to fill in the required items in the warranty.
Please be aware that the parts numbers listed in the Installation Manual may be revised.

After completing the installation,please check for safety problems such as loose fittingsor leaks.
The Instruction Manual that is packed with the product is a valuable source of product information
to help the end user use the product safely and coorectiy.Please take god care of it and keep it
from gettinBefore bathtub completely installed into position, drain tool should be firstly installed and
further installation can be continued after non-leakage g lost or soiled.After the construction is
complete,please give the manual to the end user o r the construction superintendent.
1.Important Safety Instructions.
Read and follow all instructions.Save this instruction with your instruction manual.
INSTALL TO PERMIT ACCESS FOR SERVICING.INSTALL THIS NUIT IN ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE (NEC)
NFPA 70 AND CANADIAN ELECTICAL CODE PART 1.
Please read these”Important safety instructions”carefully before begining the installation work and install the product correctly.
This installation Manual has a number of different symbols intended to allow proper ang safe installation of the product,to prevent
harm to the end user,to prevent damage to property and to prevent harm to construction workers.these symbols have the following
significance.
Please be sure to
observe the
warning and
caution symbols!
Symbol Meaning
Indicates “prohibited”activity that must not take place.
Indicates “required”activity that must not take place.
Symbol
Warning
Caution
Meaning
This symbol indicates that errant handling after disregarding this symbol could result in death or
serious personal injury.
This symbol indicates that errant handling after disregarding this symbol could result in personal
injury or cause physical damage.
The following symbols can be found in the Installation Manual or on the product and are intended to help the construction
worker install the product safely and properly. Please read the descriptions
carefully and install the product correctly.
Always do this
WarningWarning
ProhibitedProhibited
After opening the box,please immediately dispose of unneeded packaging.
Wooden frames,nails,cardboard or sealing straops could cause injury.
Additionally,childer or pets might put vinyl bags over their heads,
leading to unanticipated accidents.
Always implement the countermeasures for preventing freezing.
It is possible that the pipes could freeze,rupturing the pipes or equipment.
If installing the product in a location where damage from water leaking from the unction module is
anticipated,be sure to waterproof the floor .
If there were to be a leak,it could damdge the floor or floors below.
Use no water other than standard tap water.
The use of well water could cause corrosion,which could lead to leaks.
Cement is absolutely not allowed to be used to erect bathtub.
Otherwise it may cause crack of bathtub.
The sticking of fittings such as inlet pipe and drain pipe etc. shall be solid.
Otherwise it may cause water leakage.
③③

Prohibited
Always do this
Warning
硫磺
Install the product securely,in accordance with the Installation Manual.
Improper installation can cause leaks that damage or ruin household property.
Install the drainage pipes securely,in accordance with the procedure.
Improper installation could lead to leaks that damage or ruin household property.
Improper installation could lead to leaks that damage or ruin household property.
Otherwise poor drainage may be caused or family property be contaminated by
water leakage.
Do not drop or strike the bathtub with hard objects.
Doing so could crack or scratch the bathtub or cause leaks that damage or ruin
household property
Do not stand on bathtub while working.
Doing so could cause one to slip and fallor could otherwise damage the product.
When cleaning,chemicals such as acid,alkaline and organic solvent as well as acid
and alkali cleaner is forbidden,otherwise product surface may be damaged.
When cleaning,water or neutral cleaner is recommended for use.Cleaning
cloth dipped with a little alcohol can be used for removing smudge when
water or neutral cleaner failed to removing smudge
2.Construction On The Installation Point Of Attention.
Ensure that there is no abnormal condition before erecting bathtub.
Paper plate should be used for protecting bathtub prior to finishing construction.
Otherwise damage may be caused.
Burning objects,please do not put on the bathtub.
Otherwise damage may be caused.
On the back of bathtub mortar is forbidden to be used for filling and burying.
Otherwise damage may be caused.

3.Parts list
1
1
1
1It is used during
transportation of bathtub.
Type Remark
Bathtub
Name Quantity
Installation manual
Operation Installation
Ribbon
NTE026
NTE141
Material:FRP, artificial marble etc.
Color:Standard bathtub is matt white color.
Standard (QB)：Up to or over light industry standard of People’s Republic of China (JC/T 779-2010)
Drainage fittings：Special pedal type drainage fittings

4.Installation procedure
4-2.Installation of drain tube
Drain end of drainage fittings is inserted into ground drain tube for closely connection.
If drain end is too short, connection pipe can be used for insertion.
②.Connecting thread pipe
G1 1/2
rubber gasket teflon tape
①.Connecting PVC pipe
PVC
glue-water
height
height of about 45~55mm
OD 40 PVC pipe
● For side draining occasions, thread pipe is connected.
● For direct draining occasions, thread pipe is connected.
Special connecting glue-water of PVC pipe must be used for sticking, fixing and
sealing the connected part between drain pipe and drain tool to avoid water leakage.
Always do this
①.Connecting PVC pipe ②.Connecting thread pipe
G1 1/2
rubber gasket
teflon tape
PVC glue-water
OD 40 PVC pipe
height
height of about 30~40mm
pipe tilt 1/50 or more
4-3. Fix the foot of bathtub with mortar
1. Measure bathtub with level bar.
5mm
level bar
* Note: (1) .Ensure space larger than 100mm over outer dimension of bathtub.
(2). Adjust leveling of bathtub with level bar. Keep about 3mm for clearance
between bathtub edge near wall and wall surface or masonry surface
NOTE：We only provide the straight diain elbow,however,
customer need to buy the side drain elbow if they need.

1. During the whole installation soft material is recommend to cover bathtub surface to
prevent surface scratching.
2. Ensure that surrounding edges of bathtub not supply upward supporting force.
3. During installation bathtub is forbidden to collide with hard material and hard material
not falling into bathtub.
4. The back of bathtub can not be filled or buried by mortar otherwise damage may be
caused.
5. Never make construction by standing on bathtub or place heavy material on the edge
of bathtub otherwise damage may be caused.
WarningWarning
2. Adjust leveling of bathtub with adjustable wrench.
①.
Screw off the nut A;
Screw off
Screw off
② .Adjust the nut B to the required position.
③ .Fasten the nut A.
Fasten
Fasten
The adjusting method for supporting foot:
N ut A
N ut B
3. Coat all -purpose adhesive onto marked ground with Φ30mm for each place.
* Note: After installation of bathtub is completed, firstly clean floor, then clean bathtub with rag dipped in
neutral detergent in order to keep cleaning and beauty of bathtub.