Toto STANDARD T205 User manual

STANDARDLAVATORY FAUCET T205
S060021R
SPECIFICATIONS MAINTENANCE TROUBLESHOOTING
ATTENTION
CHECK
POINT
Water leaks around the body Tighten
PROBLEM SOLUTION
INSTALLATION
Packing
Washer
1. CERAMIC
HEAD WORK
max. 30
75
25
30°
87
40
G½
50
T205M
STANDARDLavatory Faucet
T205MV1
STANDARDLavatory Faucet
T205V7N
Lavatory Faucet w/ Acrylic Handle
T205V8
Lavatory Faucet w/ Acrylic Handle
Lock Nut
Faucet
1
OPERATING CONDITIONS
R3
Lavatory
Hole Ø25
All Finishes : Clean the finish with mild soap and warm
water. Wipe entire surface completely dry with clean
soft cloth. Many cleaners may contain chemicals, such
as ammonia, chlorine, toilet cleaner etc. which could
adversely affect the finish and are not recommended
for cleaning
1. Water supply pressure : 0.05 ~ 0.75 MPa.
2. Ensure that water supply is clean ( No Sand,
Dirt, Etc.).
Dont use abrasive cleaners or solvents on
faucets and fittings.
As the product model is constantly updated, the
actual product may not look the same as it shown
in the diagram, but the basic installation principles
are the same.
1.
2.
STANDARDLAVATORY FAUCET T205
S060021R
SPECIFICATIONS MAINTENANCE TROUBLESHOOTING
ATTENTION
CHECK
POINT
Water leaks around the body Tighten
PROBLEM SOLUTION
INSTALLATION
Packing
Washer
1. CERAMIC
HEAD WORK
max. 30
75
25
30°
87
40
G½
50
T205M
STANDARDLavatory Faucet
T205MV1
STANDARDLavatory Faucet
T205V7N
Lavatory Faucet w/ Acrylic Handle
T205V8
Lavatory Faucet w/ Acrylic Handle
Lock Nut
Faucet
1
OPERATING CONDITIONS
R3
Lavatory
Hole Ø25
All Finishes : Clean the finish with mild soap and warm
water. Wipe entire surface completely dry with clean
soft cloth. Many cleaners may contain chemicals, such
as ammonia, chlorine, toilet cleaner etc. which could
adversely affect the finish and are not recommended
for cleaning
1. Water supply pressure : 0.05 ~ 0.75 MPa.
2. Ensure that water supply is clean ( No Sand,
Dirt, Etc.).
Dont use abrasive cleaners or solvents on
faucets and fittings.
As the product model is constantly updated, the
actual product may not look the same as it shown
in the diagram, but the basic installation principles
are the same.
1.
2.

PENYELESAIAN MASALAH
POIN
CEK
Air bocor disekitar body Kenca ngkan
MASALAH SOLUSI
1
STANDARDLAVATORY FAUCET T205
S060021R
SPESIFIKASI PEMELIHARAAN
PERHATIAN
PEMASANGAN
Packing
Washer
1. CERAMIC
HEAD WORK
max. 30
75
25
30°
87
40
G½
50
T205M
STANDARDLavatory Faucet
T205MV1
STANDARDLavatory Faucet
T205V7N
Lavatory Faucet w/ Acrylic Handle
T205V8
Lavatory Faucet w/ Acrylic Handle
Lock Nut
Faucet
KONDISI OPERASIONAL
R3
Lavatory
Hole Ø25
Seluruh lapisan : Bersihkan lapisan akhir dengan
sabun lembut dan air hangat. Lap seluruh permukaan
hingga benar-benar kering dengan kain lembut yang
bersih. Kebanyakan bahan pembersih mungkin
mengandung bahan kimia, seperti amonia, klorin,
pembersih toilet, dll. yang dapat mempengaruhi hasil
akhir dan tidak disarankan untuk dibersihkan
1. Tekanan sumber air: 0.05 ~ 0.75 MPa.
2. Pastikan kondisi sumber air adalah bersih (tidak ada
pasir, kotoran dan lain lain)
Jangan gunakan pembersih atau pelarut abrasif
pada faucet dan fitting.
Karena model produk terus mengalami
pembaharuan, aktual produk mungkin tidak sama
dengan gambar, tapi prinsip dasar pemasangan
adalah sama.
1.
2.
PENYELESAIAN MASALAH
POIN
CEK
Air bocor disekitar body Kenca ngkan
MASALAH SOLUSI
1
STANDARDLAVATORY FAUCET T205
S060021R
SPESIFIKASI PEMELIHARAAN
PERHATIAN
PEMASANGAN
Packing
Washer
1. CERAMIC
HEAD WORK
max. 30
75
25
30°
87
40
G½
50
T205M
STANDARDLavatory Faucet
T205MV1
STANDARDLavatory Faucet
T205V7N
Lavatory Faucet w/ Acrylic Handle
T205V8
Lavatory Faucet w/ Acrylic Handle
Lock Nut
Faucet
KONDISI OPERASIONAL
R3
Lavatory
Hole Ø25
Seluruh lapisan : Bersihkan lapisan akhir dengan
sabun lembut dan air hangat. Lap seluruh permukaan
hingga benar-benar kering dengan kain lembut yang
bersih. Kebanyakan bahan pembersih mungkin
mengandung bahan kimia, seperti amonia, klorin,
pembersih toilet, dll. yang dapat mempengaruhi hasil
akhir dan tidak disarankan untuk dibersihkan
1. Tekanan sumber air: 0.05 ~ 0.75 MPa.
2. Pastikan kondisisumber air adalah bersih (tidak ada
pasir, kotoran dan lain lain)
Jangan gunakan pembersih atau pelarut abrasif
pada faucet dan fitting.
Karena model produk terus mengalami
pembaharuan, aktual produk mungkin tidak sama
dengan gambar, tapi prinsip dasar pemasangan
adalah sama.
1.
2.