Toto NEOREST TCF996RWG/RWSW User manual

TCF996RWG / RWSW
TCF994RWG / RWSW
NEOREST
■ Thank you for your recent purchase of the TOTO NEOREST. Please read the enclosed
information to ensure the safe use of your product.
■ Be sure to read this Instruction Manual before using your product and keep it in a safe
place for future reference.
Head Office TOTO Europe GmbH
Zollhof 2, 40221 Düsseldorf Germany
Tel:[phone]
You are advised to record the following information to allow quick service.
Date of purchase : Name of shop :
Tel :
Date : year month day
2017.8.10
D07209
Printed in China.
See Page 64.
Instruction Manual with Warranty Information

Mist
Photocatalyst coat *
UV lamp *
2 3
Safety Precautions ....................4
Operational Precautions..........11
Parts Names............................12
Preparation..............................14
Changing Settings...................40
What to Do?.............................52
●
If there is no water due to a power
outage or water failure
............52
●If you cannot operate with the
remote control......................52
●Freeze Damage Prevention.53
●Long Periods of Disuse........54
Troubleshooting.......................55
Specifications ..........................63
Warranty..................................64
Important User Guidance
Information...............................65
Basic Operations.....................16
Automatic Functions
(Cleaning Features).................20
DEODORIZER, AUTO WAND CLEANING,
AUTO BOWL CLEANING, BOWL LIGHT,
PHOTOCATALYST CLEANING, CLEAN
INDICATOR
Automatic Functions
(Convenience Features)..........22
AUTO FLUSH, AUTO OPEN/CLOSE,
SOFT LIGHT
Temperature Adjustment.........24
Energy Saver Features............26
Power Plug / Top Unit..............30
Bowl Unit .................................32
Wand.......................................33
Wand cleaning
Deodorizing Filter ....................33
Descaling mode.......................34
Water Filter Drain Valve ..........39
Table of Contents
The available functions vary according to the model.
As you move
away
As you stand up
As you approach
and sit
• A mist is sprayed in
the bowl unit to make it
more difficult for dirt to
adhere.
• When you sit on
the toilet seat, the
deodorizer operates.
• The wand is cleaned
with [ewater+].
(The wand extends and
then retracts.)
• [ewater+] is sprayed in
the bowl unit to maintain
cleanliness.
• The UV lamp lights up
for about 1 hour. *
The self-cleaning functions operate
automatically.
(See pages 20 and 21 for details.)
NEOREST
Ref.
Page
TCF996 TCF994
Basic
Functions
Cleansing
Rear cleansing
••
16
Rear soft cleansing
Front cleansing
Changing the washing
method
Wand position adjustment
Water pressure adjustment
Oscillating cleansing
Pulsating cleansing
Personal setting lock
Drying Warm air drying ••
16
Changing the temperature
Temperature adjustment •• 24, 25
Sanitary
Functions
[ewater+] sanitizing Auto wand cleaning ••
20, 21
Auto bowl cleaning
Maintaining the bowl unit
cleanliness Photocatalyst cleaning •-
Removing odors Deodorizer ••
Convenient
Functions
Flushing
Remote control bowl unit cleaning
••
17
Auto bowl unit cleaning ••
22, 23
Opening and closing
Opening and closing the toilet
seat with remote control ••
Auto open / close (lid) 22, 23
Lighting up Soft light
Heating the toilet seat Heated seat ••
-
Saving energy Timer energy saver ••
26, 27
Auto energy saver ••
Maintenance Wand cleaning ••
33
Descaling mode ••
34
Model
Part No.
Your Model
Functions
Cleaning
Support
Sanitary Toilet
The [ewater+] feature and "photocatalyst cleaning*" keep the toilet bowl
clean at all times.
* TCF996 only
Part number system
Top unit
TCF○○○○ Bowl unit
CW○○○○
Model name
Part No.
ReferenceMaintenanceOperationIntroduction
Check your model name
and write a check mark in
this field as needed.

4 5
These precautions are important for safe usage. Be sure to follow them and use the product correctly.
Symbols and Meanings
WARNING May result in death or serious injury.
CAUTION May result in injury or property damage.
The following symbols are used to indicate important safety instructions for the use of the product.
Symbol Meaning
This symbol indicates a prohibited use of the product.
This symbol is used to indicate a required step in the use of this product.
• This product is classified as Class 1 Equipment and must be grounded via an ground connection.
• Install this equipment close to a electrical outlet.
• This equipment is not to be used by any person who has reduced physical, sensory or mental abilities (including
children), nor is it to be used by any person who lacks sufficient experience or knowledge. However, such
persons may use the equipment when a person who takes responsibility for their safety provides supervision
and direction.
Children must be supervised to make certain that they do not play with the equipment.
• Use the new hose set included with this equipment. Do not reuse an old hose set.
WARNING
Do not touch the power plug or connection of electrical box with wet hands.
• Doing so may cause electrical shock.
Do not get any water or cleaning solution on the top unit or power plug or
electrical box.
• Doing so may cause fire, electrical shock, heat or short circuit.
• Doing so may cause the product to crack resulting in injury or water damage.
Never disassemble, repair or alter.
Do not use tools in places other than designated.
• Doing so may cause fire, electrical shock, overheating, short circuit or breakdown.
Do not install the product on moving vehicles such as wheeled vehicles or boats.
• Doing so may cause fire, electric shock, short circuit or malfunction.
• The toilet seat, toilet lid, top unit or other parts may come loose and fall off, resulting in injury.
Safety Precautions
WARNING
Do not use the NEOREST if a malfunction occurs.
• In case of breakdown or other problem, be sure to cut off power by means such as unplugging
the power plug or switching the breaker in the distribution board to OFF.
• Close the water shutoff valve to stop water supply.
Possible malfunctions:
−Water is leaking from a pipe or the top unit.
−The product is cracked or broken.
−The product makes a strange noise or emits a strange odor.
−The product emits smoke.
−The product is abnormally hot.
−The bowl unit is clogged.
−The toilet seat cushion is out of place.
• Continued use after malfunction could cause a fire, electric shock, heat, short circuit, injury or
water damage.
Only use tap water or potable well water (underground water).
Do not use seawater.
• Doing so may cause irritation to the skin and malfunction.
Do not touch the power plug or electrical box during thunderstorms.
• Doing so may cause electrical shock.
Do not allow the water supply hose to touch the power plug or outlet or
electrical box.
• Doing so may cause condensation resulting in a fire, electrical shock, heat or a short.
Do not do anything that may damage the power cord, power plug.
Do not strike, yank, twist, excessively bend, damage, alter, or heat the electrical cords. Also, do
not place anything heavy on, bind or pinch the electrical cords.
• Using a damaged electrical cord may result in a fire, electrical shock, heat or short.
Do not use a loose or faulty electrical outlet. (Europe and Russia)
• Doing so may cause fire or short circuit.
Do no use any outlet or wiring equipment beyond its specified rating.
(Europe and Russia)
• Plugging too many plugs into the same outlet, for example using outlet splitters, can cause fire
due to heat.
Do not use any power supply other than the one specified.
AC 220V - 240V, 50Hz
• Doing so may cause fire or excessive heat.
Introduction

6 7
WARNING
To reduce the danger of burns, death from electric shock, fire or other
human injury:
−Never operate this product if it has a damaged cord or plug, if it is not working properly, if it
has been dropped or damaged, or if it has been dropped in water. Return the product to TOTO
Europe GmbH for examination and repair.
−Never block the air openings of the product or place it on a soft surface, such as a bed or a
couch, where the air openings could be blocked. Keep the air openings free of lint, hair or a
similar material.
−Never use it while sleepy or drowsy.
−Never drop or insert anything into any opening or hose.
−Do not use it outdoors where aerosol (spray) products are being used or where oxygen is
being administered.
Do not stick a finger or anything else into the warm air outlet.
Do not place anything on the warm air outlet or drape clothes over it.
• Doing so may cause burns, electrical shock or malfunction.
Keep cigarettes and other open flames away from the product.
• Failure to do so may cause fire.
Safety Precautions (Continued)
WARNING
Refrain from sitting on the seat for long periods.
• Improper use of the toilet seat may cause irritation or burn.
When sitting for a long time on the toilet seat, switch the toilet seat temperature adjustment to "OFF".
When any of the following persons use a heated seat or warm air drying, someone should switch
the toilet seat temperature adjustment to "OFF" and switch the drying air temperature to "Low".
−
Young children, the aged and other users unable to set the temperature appropriately themselves
−The ill, physically disabled and others who do not have freedom of movement.
−Those using any medicines that cause drowsiness (sleeping or cold medicine), those who have
been drinking heavily, anyone severely fatigued and anyone else liable to fall asleep.
To reduce the danger of burns, death from electric shock,
fire or other human injury:
−Close supervision is necessary when this product is used by or near children or invalids.
−Use this product only for its intended use as described in this manual. Do not use accessories
not recommended by the manufacturer.
−Keep the cord away from heated surfaces.
−Connect this product to a properly grounded outlet only.
This is an electrical product. Do not install it anywhere water is likely to get on
the product or anywhere with humidity high enough that water is likely to form
on the surface of this product. When using the product in a bathroom, install
a fan or ventilation port and ensure good air flow through the bathroom.
• Failure to do so may cause fire or electrical shock.
Always connect the NEOREST to the cold water supply.
• Connecting to hot water supply may result in burns and equipment damage.
Check that an appropriate ground is installed.
• If the ground is not installed, if there is a breakdown or electrical current leak, the lack of a
ground could cause electrical shock. For the ground, use copper wire with a ground resistance of
100 Ωmax. and a diameter of 1.6 mm min.
* If there is no ground installed, ask the contractor who did the installation to install the ground.
Make sure that a properly grounded (3 prong) outlet has been installed.
• Failure to install a grounded outlet could cause electrical shock in the event of a malfunction or
short circuit.
Check that the outlet for electrical power is as follows.
• Failure to do so may cause fire or electrical shock.
a. Apply a current to the outlet (or device) through a differential residual current device (DDR)
whose release current does not exceed 30 mA.
b. Install the outlet (or device) and its wiring plug at least 0.60 m away from the outside of the
shower tub or bathtub.
* Check that the wiring in a. and b. above is complete. If the wiring has not been completed, ask
the contractor who did the installation to do it.
Introduction

8 9
Safety Precautions (Continued)
CAUTION
Do not use the product if the top unit is unstable.
• Doing so may cause the top unit to come loose and fall, resulting in injury.
If the product is damaged, do not touch the damaged section.
• Doing so may cause electrical shock or injury.
Replace it immediately.Do not apply strong force, mechanical shock, step on or
stand on the toilet seat, toilet lid or top unit. Also do not place any heavy
object on the toilet seat, toilet lid or top unit.
• Doing so may cause cracking or cause the top unit to come loose and fall, resulting in injury.
• Doing so may damage the product and cause injury or water damage.
Do not lift up this product by the toilet seat or lid.
Do not raise the toilet seat or lid while objects are resting on top of the toilet.
• Doing so may cause the top unit to come loose and fall, resulting in injury.
To reduce the danger of death from electric shock:
−Do not use while bathing.
−Do not place or store the product where it could fall or be pulled into a tub or sink.
−Do not put in or drop into water or other liquid.
−Do not try to recover the product if it has fallen into water. Unplug it immediately.
Always switch the breaker on the distribution board to OFF. (UK)
When cleaning or maintaining the plastic parts (top unit etc.) or the water supply
hose, use a kitchen cleaner diluted with water. Do not use any of the following.
Toilet cleaner, household cleaner, benzene, paint thinner, powdered cleanser or nylon scrubbing pads.
• These items may damage or crack the plastic and cause injury or malfunction.
• These items could damage the water supply hose and cause a water leak.
To prevent a sudden water leak, do not remove the water filter drain valve
when the shutoff valve is open.
• Doing so will cause water to spurt out.
(Refer to Page 39 for instructions on cleaning the water filter drain valve.)
Do not fold or crush the water supply hose; do not damage by cutting with a
sharp object.
• Doing so may cause water leaks.
Do not pour hot water into the toilet.
• Doing so may result in damage to the toilet, injury or water damage.
Do not flush anything other than bodily waste and toilet paper. Also, do not
flush too much toilet paper.
• Doing so may clog the toilet, causing waste water overflow and water damage.
Keep the bowl filled with water.
• Failure to do so may cause sewer gas, chlorine gas, or hydrogen sulfide to corrode facilities and
equipment.
Do not look directly at UV light.
• May cause eye or skin irritation.
• There are no user replaceable parts. Shall be serviced by qualified personnel only.
WARNING
Insert the power plug securely into the outlet.
Check that the power cord is connected. (UK)
• Failure to do so may cause fire, heat or short circuit.
* When installing this product, observe the local laws and regulations regarding installation.
To unplug, hold the plug, not the cord. (Europe and Russia)
Do not unplug by pulling the cord.
• Pulling on the cord may cause damage and result in fire or heat.
If the electric cord is damaged, avoid danger by having the manufacturer’s
repair department or equivalent specialist replace it.
Always disconnect the power plug from the outlet before cleaning,
maintenance or inspection.
Always switch the breaker on the distribution board to OFF. (UK)
• Failure to do so may cause electrical shock or malfunction.
* Except when using "Wand cleaning"
Periodically remove dust and dirt from the power plug and make sure it is
securely plugged into the wall outlet. (Europe and Russia)
• Failure to do so may cause fire, heat or short circuit.
Pull the plug out from the outlet and wipe clean with a dry cloth.
Always unplug the plug from the outlet before removing the top unit.
Always switch the breaker on the distribution board to OFF. (UK)
• Failure to do so may cause fire or electrical shock.
When leaking battery fluid adheres to your body or clothes, wash it away with clean
water.
• The fluid may damage your eyes or skin.
Introduction

10 11
Safety Precautions (Continued) Operational Precautions
■ For prevention of damage
● Wipe plastic areas such
as the top unit and remote
control with a soft, wet
cloth.
Dry cloth or tissue
● Do not lean against the
toilet lid.
■ Problem Prevention
● Disconnect the power plug if there is a risk of lightning.
Switch the breaker on the distribution board to OFF. (UK)
● A toilet seat cover or a toilet lid cover cannot be used.
(The body sensors or seat switch may not function properly.)
Covers
● Do not urinate on the top unit, toilet seat or wand.
(Doing so may cause pink or brown stains or a
malfunction.)
● Do not apply strong forces to the control panel of the
remote control.
● When using a toilet cleaner to clean the toilet, wash it off
within 3 minutes and leave the toilet seat and toilet lid open.
Wipe off any cleaner that remains on the toilet bowl.
(If vapor from a toilet bowl cleaner enters the top unit, it may
cause a malfunction.)
● Do not expose to direct sunlight.
(Doing so may cause changes in color, irregular
heated seat temperature, remote control malfunction or
NEOREST malfunction due to the change in temperature.)
● Use radios, etc. away from the NEOREST.
(The NEOREST could cause interference with the radio signal.)
● If you use a booster seat for infants or a soft highchair,
remove it after use.
(Keeping it installed may prevent some of the functions
from being used.)
● Do not apply force to the remote control.
(May cause malfunction.)
To prevent the remote control from being dropped, set it
in the hanger when you are not using it. Be careful not
to expose it to water.
About rear cleansing, rear soft cleansing and
front cleansing
• These functions wash away waste and dirt from
a localized area of your body.
• Do not cleanse too much or for too long.
Doing so may wash away normal bacteria, upsetting
the balance of bacteria inside your body.
• People who are receiving medical treatment or
therapy in this localized area should consult
their doctor before use.
■ For prevention of malfunctions
● Do not block the body sensor or the remote control
transmitter or receiver.
< About the body sensors >
● Body sensors detect a person standing in front of
the bowl unit.
•
Body sensors emit an infrared beam as shown in
the figures. When someone moves into the line of
this infrared beam, the sensor detects the person.
* Detection by the sensor may be difficult when
the toilet is used by someone small, such as a
child.
Body sensor A Body sensor B
< About the seat switch >
● When you sit on the toilet seat, the seat switch turns
ON, enabling you to use various features.
(A click sound is heard when the seat switch is
ACTIVATED.)
Seat switch
(
Built-in
)
The toilet seat lowers.
Switch
ON Gap
● Sit back on the toilet seat.
• The seat switch will not turn on unless you
sit on the seat properly.
Note
• When a child uses the NEOREST, the seat
switch may not be ACTIVATED by their light
body weight.
• Since the toilet seat is designed to move up
and down, a clearance is provided between
the toilet seat cushion and the toilet bowl.
CAUTION
If a water leak should occur, always close the shutoff valve.
When the ambient temperature is likely to drop to 0°C or lower, prevent
damage to the pipes and hoses due to freezing.
• Frozen water pipes could cause the top unit and the pipes to break, resulting in a water leak.
•
Regulate the room temperature to prevent the pipes and hoses from freezing during cold months.
When not using the NEOREST over an extended period of time, drain the
water out of the top unit and the water supply hose, and pull the electrical
plug from the outlet.
Switch the breaker on the distribution board to OFF. (UK)
• When using the product again, allow the product to refill with water first. Otherwise, the water in
the tank might become contaminated and cause skin inflammation or other problems.
(Refer to Page 54 for instructions on replenishing the water.)
• Leaving the power on may cause fire or heat.
When installing the water filter drain valve, make sure that it is securely
tightened in its proper position.
• Failure to securely tighten it may cause a water leaks.
If the bowl unit is clogged, disconnect the power plug and remove the clog.
Switch the breaker on the distribution board to OFF and remove the clog. (UK)
• If the auto flush were allowed to function, it would make the wastewater in the bowl unit overflow
and may result in water damage.
• Use any commonly available toilet plunger to remove the clogging.
Always flush, even after just urinating.
• Failure to do so may clog the toilet, causing waste water overflow and water damage or
inadequate flushing of the bowl unit.
Wipe condensation on the bowl unit, tank, water supply pipe and shutoff
valve with a dry cloth.
• Condensation may cause staining and corrosion of the floor.
• Ventilate the restroom to prevent condensation.
Wipe any urine, condensation, cleaner, water, etc. that has gotten on the
floor with a well-wrung mop or cloth.
• Failure to do so may cause staining and corrosion of the floor.
Make sure of the plus and minus signs on the batteries before inserting them.
Remove depleted batteries immediately.
When replacing the batteries:
Replace both batteries with new ones.
Use the same brand for both new batteries (any brand available).
• Failure to do so may cause the batteries to leak fluid, generate heat, rupture, or ignite.
When the product is supposed not to be used for long time, remove the
batteries from the remote control and battery box.
• Failure to do so may cause the batteries to leak fluid.
Introduction

12 13
Parts Names
POWER ON/OFF
Water filter drain valve (Page 39)
Cover
Water drain lever (Page 54)
FRONT ON/OFF
POWER LED
ENERGY SAVER LED
CLEAN indicator
FLUSH
Soft light
REAR ON/OFF
Main display
UV lamp
Toilet lid
Seat switch (Built-in)
Shutoff valve (Page 15)
Water supply hose
Side-panel (Page 15)
Bowl unit
(Page 32)
Heated seat
Wand
Wand cover
Warm air outlet cover
Body sensor A (Page 11)
Control panel
Left side of top unit
Top side of the top unit
Model name,
part no., etc.
Cover
Agent port
Cap
Remote control receiver
Toilet lid cushion
Toilet seat cushions
Body sensor B
(Page 11)
Power plug (Page 15)
Sewage-block packing
Mist nozzle
Deodorizing filter (Page 33)
TCF994
The toilet lid shape varies by model.
Descri
p
tions in this manual are based on the illustrations of TCF996.
Electrical box
[United Kingdom]
Side-panel (Page 15)
Introduction

14 15
Preparation
Using the Product for the First Time
2.Turn on the power
1Remove the side-panel and
insert the power plug.
Switch the breaker on the
distribution board to ON. (UK)
•The wand extends and then retracts.
• Flushes automatically.
Side-panel (right)
Screw
(1) Loosen
(2)
Pull up
(3)
Pull out
Loosen the bottom screw of the side-panel (right) with a
flat-head screwdriver, pull the side-panel diagonally upward,
and then pull it out downward.
• Both side-panels can be removed or installed in the
same way.
•Dropping the side-panels may cause damage.
2Check that the POWER LED
on the main display is lit up.
• If it does not light up, press [POWER
ON/OFF] to light it up.
3Reinstall the side-panel. (Europe and Russia)
(1) (2)
(3)
Reference line for
panel installation
Keep the side-panel (right) aligned with the reference line for panel
installation, and then tighten the bottom screw with a flat-head screwdriver.
(1) Fit it in from
below at an
angle.
(2) Keep it aligned with
the reference line for
panel installation
(3) Tighten
If the remote control is secured
(for anti theft)
1Remove the screws (2, left
and right) from the remote
control fixture.
Remote
control
Remove
Hanger
Screw
(2 pieces,
left and right)
Wall
㧔View from side㧕
Phillips
screwdriver
(Fine-tip type)
2Remove the remote control
from the hanger.
Remote
control Hanger
Wall
■ To secure the remote control again
Tighten and fix the screws (2, left and right).
(Overtightening may cause damage to parts
such as the hanger)
1.Insert the battery
1Remove the remote control
from the hanger.
Remote control
Hanger
2Open the battery cover and
insert two AA batteries.
Battery cover
Close
Open
● When batteries are properly inserted,
temperature levels appear on the display of
the remote control (back side).
● The display goes out when no button on the
remote control is pressed for 1 minute or
more.
WATER TEMP
SEAT TEMP
DRYER TEMP
3Mount the remote control in
the hanger.
■ About the batteries
•Use dry cell, alkaline batteries.
•Be sure to follow "Safety Precautions" to prevent
the batteries from rupturing or leaking fluid.
(Pages 8, 10)
To turn the power "OFF"
Press [POWER ON/OFF] to
turn the power off.
•The POWER LED goes off.
3.Open the shutoff valve
1Fully open the shutoff valve.
The shutoff valve is located in the side-panel (left).
(Refer to the above for removal and installation.)
Side-panel (left)
Introduction

[REAR] Cleanses your rear.
[SOFT]ࠈWashes your rear with mild water pressure.
[FRONT]ࠈServes as a bidet for ladies.
[DRYER]ࠈDries your rear.
[STOP]
Stops the operation.
Cleansing
Drying
Stopping
ƔFunctions that operate when a button is pressed
during [REAR], [SOFT] or [FRONT] cleansing.
ƔSitting back on the toilet seat makes it easier to
adjust the wand position and to reduce splashing.
[OSCILLATE]
ƔThe wand moves back and forth to wash
your rear thoroughly.
ƔThe setting changes between "ON" and
"OFF" each time the button is pressed.
[PULSATE]
Ɣ
Washes with the water pressure
pulsating between soft and
strong.
ƔThe setting changes between
"ON" and "OFF" each time
the button is pressed.
Low battery warning LED
(Page 52)
[PRESSURE]
ƔYou can adjust the water pressure to one of five levels. ([-]: Softer, [+]: Stronger)
Ɣ
When you press the button to flush, the position returns to the standard position(3rd position).
ƔIf you do not want to return the wand to the standard position. (Page 50)
[POSITION]
ƔYou can adjust the position to one of five positions.
>Ÿ@WRWKHIURQW>ź@WRWKHUHDU
ƔWhen you press the button to flush, the position
returns to the standard position (3rd position).
ƔIf you do not want to return the wand to the
standard position.(Page 50)
[USER1] / [USER2]
You can store your preferred wand position, water pressure and
water temperature a setting.
ƔTo store a setting
ࠈ
While cleansing is in progress, set your preferred wand position,
water pressure, and warm water temperature, and then press
and hold [USER 1] or [USER 2] for 2 seconds or longer.
ƔTo use
Press [USER 1] or [USER 2], and then press the button for
the cleansing you want to use.
PERSONAL SETTING
Note
Press a button on the remote control; a beep sounds when the top unit receives the signal.
[]
Display screen
ƔAdjust settings, check status, etc.
The display goes out when no button on the
remote control is pressed for 1 minute or more.
MENU/RETURN button
ƔAdjust settings
ƔReturn to previous menu
Temperature adjustment
button
ƔAdjust temperatures
Flushing
Opening
and closing
When flushing and opening/closing the toilet lid and
toilet seat with the remote control
Opens and closes the toilet seat
.
Perform a light flush.
Perform a flush.
Remote control back side
[FLUSH]
[FLUSH]
16 17
Operation
Basic Operations

MENU
1.MANUAL CLEANING
2.ENERGY SAVER
1/4
1.MANUAL CLEANING
2.ENERGY SAVER
3.AUTO FUNCTION
4.OTHER SETTING
MENU
SELECT [●ENTER] PUSH
1/4
[●ENTER] PUSH
SELECT
This section is an overview
of the settings that can be
configured with the remote
control.
●See the corresponding pages
for the detailed descriptions.
: Select an item
: Select a setting
: Confirm
MENU/RETURN
button
Remote control back side
Number of items
on display
Set up easily with simple steps!
1.TIMER SAVER
TIMER SAVER
1/1
1.BEEP
2.
PERSONAL SETTING LOCK
3.PRESSURE /POSITION
SETTING
OTHER SETTING
1/3
1.AUTO OPEN/CLOSE
2.AUTO CLOSE DELAY
3.AUTO OPEN DELAY
4.SEAT/LID
AUTO OPEN/CLOSE
1/4
1.AUTO WAND CLEAN
2.DEODORIZER
AUTO CLEANING
1/2
1.SOFT LIGHT
2.BOWL LIGHT
3.INDICATOR
LIGHT
1/3
1.AUTO ENERGY SAVER
2.TIMER SAVER
ENERGY SAVER
1/2
1. WAND CLEANING
2.DESCALING MODE
MANUAL CLEANING
1/2
ON/OFF
1.AUTO FLUSH
2.AUTO FLUSH DELAY
AUTO FLUSH
1/2
1.AUTO FLUSH
2.AUTO OPEN/CLOSE
3.AUTO CLEANING
4.LIGHT
AUTO FUNCTION
1/4
START
DESCALING MODE?
NO
Level 1 Level 2
18 19
Operation
Basic Operations
About the Menu Screen

20 21
Operation
As you
approach As you sit*2 As you stand up As you
leave
Note Changing
settings
• DEODORIZER
ON/OFF
(Page 46)
DEODORIZER Starts the
deodorizer Deodorizer stops
➝It stops after about 2 minutes
• AUTO WAND
CLEAN ON/OFF
(Page 46)
Clean the wand
automatically with
[ewater+] *1
AUTO WAND
CLEANING
Cleans the wand
automatically *2
(After about 25 seconds)
➝
The wand extends and
[ewater+] *1 comes out
from the base of the
wand (Only when the
cleansing functions are
used)
• When the cleansing functions
have not been used in 8 hours, the
wand is cleaned automatically.
(Water comes out from near the
wand cover.)
PHOTOCATALYST
CLEANING
TCF996 only
The UV lamp
lights up
(For about 1 hour)
• The UV lamp does not light up in
the following conditions.
➝
The toilet lid is open
(such as when
AUTO OPEN/CLOSE is set to "OFF")
➝
"Flush" and cleansing *3 are not used
• When the "Flush" and cleansing *3
are not used for about 10 hours,
the UV lamp lights up.
−
Sanitize the bowl unit
with [ewater+] *1
AUTO BOWL
CLEANING
Pre-mist
(A mist is sprayed
inside the bowl unit to
make it more difficult
for dirt to adhere)
After-mist
(After auto wand cleaning)
• If the cleansing functions
are not used, after-mist
starts after about 25
seconds.
➝
[ewater+] *1 mist is
sprayed on the bowl
unit
• The pre-mist and after-mist are not
sprayed if the toilet seat is open.
• The pre-mist does not work for
about 90 seconds after the after-
mist has finished.
•
When the cleansing feature (rear
and front cleansing etc,) is not used
for about 8 hours, mist is sprayed on
the bowl unit automatically.
−
• BOWL LIGHT
ON/OFF
(Page 48)
BOWL LIGHT (Lights up during pre-mist)
(Lights up during auto wand cleaning and after-mist)
•
Lights up continuously or in a cycle when
"AUTO WAND CLEANING", "AUTO
BOWL CLEANING" or "DEODORIZER"
is operating.(Lights up in a cycle only
when the seat has been used.)
• INDICATOR
ON/OFF
(Page 48)
INDICATOR (Lights up) (Lights up in a cycle)
*2 Water comes out from around the wand.
*3 [FLUSH], [REAR] and [SOFT] cleansing.
Automatic Functions Cleaning Features
[ewater+] *1 is used automatically to clean the wand and
bowl unit.
*1 What is meant by [ewater+] ?
This water containing hopychlorous
acid generated from chloride ions in
tap water, is widely used for cleaning
and disinfecting items such as food,
utensils and baby bottles.
• Well water may not deliver the required
effect. (Because the level of chloride
ions is low.)
• Clean, sterile water helps to minimize
dirty surfaces, but does not make
cleaning unnecessary.
• The effect and duration vary depending
on the usage environment and
conditions.
If dirt adheres...
■ If dirt adheres to the wand
during use, you can extend
the wand to clean it.
● Cleaning the wand (Page 33)
Support Cleaning
■ CLEAN indicator
Lights to show that the "CLEAN"
functions are operating.
■ Bowl light
Lights to show that auto bowl cleaning and
auto wand cleaning are operating.

22 23
Operation
Automatic Functions
Convenience Features
Various automatic
functions are available,
such as a toilet lid
that opens and closes
automatically.
• Operation under the initial
settings is described below.
As you
approach As you sit As you stand up As you move away
Note Changing
settings
Flush automatically
AUTO FLUSH
When using the toilet seat The toilet
flushes.
(After about
10 seconds)
• Auto flush is not available in the
following cases.
(Flush with the remote control.)
➝
For about 60 seconds after flushing
When a person sits on the toilet seat (or
when a male user stands in front of the bowl
unit for urinating) for about 6 seconds or less
• The flushing varies depending on how
long you sit on the toilet seat.
About 6 to 30 seconds: "Light flush"
About 30 seconds or more: "Flush"
• AUTO FLUSH ON/OFF
• AUTO FLUSH DELAY
(5 seconds, 10 seconds or
15 seconds)
(Page 42)
When standing-up to urinate The toilet flushes.
(Performs a "Light flush" about
3 seconds after the user has
moved about 30 cm away from
the toilet seat)
Opening the toilet lid
automatically
AUTO OPEN/
CLOSE
When using the toilet seat
• When the toilet lid is closed with the
remote control or by hand, it cannot
open automatically for about 15
seconds. (Open and close manually.)
• When you do not sit on the toilet
seat, or when you sit on it or stand in
front of the bowl unit briefly, it takes
about 5 minutes before the lid close
automatically.
• AUTO OPEN/CLOSE
ON/OFF
• AUTO OPEN DELAY
(15 seconds, 30 seconds or
90 seconds)
• AUTO CLOSE DELAY
(25 seconds or 90 seconds)
• Automatically opening the
toilet lid or both the toilet
seat and toilet lid
(Page 44)
Toilet lid
opens
Toilet lid
closes
(About 90
seconds after you
stand up from
the toilet seat)
When standing-up to urinate
Toilet lid
opens
*Open the toilet seat with
the remote control.
The toilet lid and toilet
seat close
(About 90 seconds after the user
has moved about 30 cm away
from the toilet seat.)
Lighting up the inside of the
bathroom with a soft light
SOFT LIGHT
Lights up in
middle mode Lights up in
high mode Lights up in
middle mode
(About 90 seconds)
Lights up in
low mode
(Goes out after about 5 seconds.)
• SOFT LIGHT ON/OFF
(Page 48)

24 25
Operation
Temperature Adjustment
Warm Water / Toilet Seat / Drying
1Remove the remote control from
the hanger.
If the remote control is locked to prevent theft
(Page 14)
Hanger
2Press [TEMP].
WATER TEMP
SEAT TEMP
DRYER TEMP
: Select an item
: Select a setting
Temperature adjustment
button
Remote control back side
WATER TEMP
SEAT TEMP
DRYER TEMP
3Use to select the item
you want to set. 4
Use to select the
temperature level.
<Settings
complete>
WATER TEMP
SEAT TEMP
DRYER TEMP
WATER TEMP
SEAT TEMP
DRYER TEMP
WATER TEMP
SEAT TEMP
DRYER TEMP
WATER TEMP
SEAT TEMP
DRYER TEMP
WATER TEMP
SEAT TEMP
DRYER TEMP
Warm water
temperature
OFF* Low High
Press
until [OFF]
appears.
Toilet seat
temperature
OFF Low High
Press
until [OFF]
appears.
Drying air
temperature
Low High
*To prevent condensation, the water temperature does not drop below
20°C even when set to "OFF".
You can adjust the temperature levels or turn the settings to "OFF".

26 27
Operation
Energy Saver Features
Type
You can save energy by turning the toilet seat heater to a low temperature (or turning
the heater "OFF") during periods when the toilet will be used infrequently.
• It takes about 10 days for the product to determine the periods when it is used relatively less frequently.
Note
● Even if the toilet seat heater is set to "Low" or "OFF", the toilet seat is temporarily heated when you sit on it.
Type Situation When energy saver is set When energy saver is in operation AM PM
Main Display Toilet seat heater 068 590
AUTO
ENERGY
SAVER
You want to save
energy but dislike a
cold toilet seat
The NEOREST detects time
periods with infrequent use
and lowers the toilet seat
temperature automatically. Green
Off
When energy saver is not set
Orange Low
Example: Used infrequently from 9 pm to 6 am
Set temperature*1
Low
temperature
*2
Low
temperature
*2
TIMER
ENERGY
SAVER
You want to save
energy only for the
preset duration of time.
If you set the duration of time
(3 hours, 6 hours or 9 hours)
during which you want to save
energy, the heater automatically
turns off every day in the set
time slot.
Green OFF
Example: Set from 8 am to 5 pm
Set temperature*1 Set temperature*1
OFF *3
AUTO
ENERGY
SAVER
TIMER
ENERGY
SAVER
You want to save a
lot of energy with
auto energy saver
and timer energy
saver
When both timer energy saver
and auto energy saver are set,
auto energy saver operates
when timer energy saver is not
operating.
• During timer energy
saver :
Same LED indication
as timer energy saver
(See above)
• During auto energy
saver :
Same LED indication
as auto energy saver
(See above)
OFF
Low
Example: When timer energy saver and auto energy saver are used together
Set
temperature
*1
Set
temperature
*1
Low
temperature
*2
Low
temperature
*2
OFF *3
To set energy saver Page 28 . 29
*1 The toilet seat temperature set on Page 24.
*2 The time period when the toilet seat heater is set to a low temperature by the auto energy saver.
*3 The time period when the toilet seat heater is "OFF".

28 29
Operation
Energy Saver Features
How to set
Set the timer energy saver at the time you want to start it.
AUTO ENERGY
SAVER
3Use to select
[AUTO ENERGY
SAVER].
ENERGY SAVER
1.
AUTO ENERGY SAVER
2.TIMER SAVER
1/2
OFF
[●ENTER] PUSH
SELECT
4Use to select
[ON] or [OFF]
and then press
[●ENTER].
ENERGY SAVER
1.
AUTO ENERGY SAVER
2.TIMER SAVER
1/2
ON
[●ENTER] PUSH
SELECT
AUTO ENERGY SAVER ON
To return
TIMER ENERGY
SAVER
3Use to select
[TIMER SAVER]
and then press
[●ENTER].
ENERGY SAVER
1.
AUTO ENERGY SAVER
2.TIMER SAVER
2/2
OFF
[●ENTER] PUSH
SELECT
4Use to select
[3H], [6H], [9H] or
[OFF] and then
press [●ENTER].
TIMER SAVER
1.TIMER SAVER
2/2
3H
[●ENTER] PUSH
SELECT
TIMER SAVER ON
To return
■To change the timer energy saver time ▶Set the timer energy saver again at
the time you want to start it.
TURNING OFF
ENERGY SAVER
Select [OFF] in step 4in each
procedure above and then press
[●ENTER].
ENERGY SAVER
1.
AUTO ENERGY SAVER
2.TIMER SAVER
1/2
OFF
[●ENTER] PUSH
SELECT
AUTO ENERGY OFF
(Example) To return
1
MENU
1.MANUAL CLEANING
2.ENERGY SAVER
1/4
[●ENTER] PUSH
SELECT
Press [MENU].
2
MENU
1.MANUAL CLEANING
2.ENERGY SAVER
2/4
[●ENTER] PUSH
SELECT
Use to select
[ENERGY SAVER]
and then press
[
●
ENTER].
ENERGY SAVER
1.
AUTO ENERGY SAVER
2.TIMER SAVER
1/2
OFF
>Ɣ(17(5@ PUSH
SELECT
MENU/RETURN
button
Remote control back side
When energy saver is set,
the ENERGY SAVER LED (green)
lights up.
: Select an item
: Select a setting
: Confirm

Electrical box
[United Kingdom]
Power plug
Top unit
Bowl unit
30 31
Maintenance
Power plug (Perform monthly)
<Europe and Russia Only>
Dry cloth Wet cloth
1Disconnect the power plug
and wipe it with a dry cloth.
The power plug is located in the side-panel
(right).
(Instructions on removing the side-panel
➝Page 15)
2Insert the power plug.
(Instructions on installing the side-panel
➝Page 15)
WARNING
● Periodically remove dust from
the blades and other parts of the
power plug.
• Disconnect the plug and wipe it
with a dry cloth.
● Fully insert the power plug.
● When disconnecting, hold the
main body of the power plug.
• Pulling the cord may damage the
plug or cord.
WARNING
Always disconnect the power plug from
the outlet before cleaning, maintenance
or inspection. (Page 15)
Always switch the breaker on
the distribution board to OFF. (UK)
(Otherwise, it may cause electrical shock or
malfunction.)
*For safety, disconnect the
power plug before cleaning
or maintenance.
*Switch the breaker on the
distribution board to OFF. (UK)
*Except when using "Wand cleaning"
*When you insert the power plug, the toilet bowl flushes
automatically.
*When you turn on the breaker on the distribution board,
the toilet bowl flushes automatically. (UK)
Do not use a dry cloth
or toilet paper on plastic
parts.
(May cause damage.)
Top Unit (Perform daily)
Soft cloth soaked in water • Toilet paper
• Dry cloth
• Nylon scrubbing pads
(May cause damage.)
1Unplug the power plug.(Page 15)
Switch the breaker on the distribution board to OFF.(UK)
2Wipe with a soft cloth that has been soaked in water and wrung-out
thoroughly.
■ For heavy dirt
•Wipe with a soft cloth soaked in diluted, neutral kitchen detergent, and then wipe with a soft cloth soaked in water.
• Neutral kitchen detergent • Paint thinner
• Benzene
• Powdered cleanser
3Insert the power plug.(Page 15)
Switch the breaker on the distribution board to ON.(UK)
Attention!
● Do not push or pull the wand cover or the warm air dryer cover with undue force.
(May cause damage or malfunction.)
Caution with use of detergent
● The NEOREST is an electric appliance. Be careful not to let water seep inside or leave detergent in the
gap between the top unit and bowl unit. (May damage plastic parts or cause a malfunction.)
● When using a toilet cleaner to clean the toilet, wash it off within 3 minutes and leave the toilet seat and
toilet lid open.
• Wipe off any cleaner that remains on the toilet bowl. (If vapor from a toilet bowl cleaner enters the top unit, it
may cause a malfunction.)
● Do not use any water repellant, stain-proofing cleaner or surface coating agent. These products would
not damage the porcelain surface, but they may cover the porcelain surface and reduce the effect of
the built-in stain prevention technology.
Maintenance Power plug Top unit

32 33
Maintenance
Maintenance Bowl unit
Bowl unit (Perform daily)
• Toilet brush
• Neutral toilet detergent
• Strongly acidic cleaners or strong
alkaline cleaners
• Cleaners containing abrasive
compounds
• Fluoride-based detergent (containing
hydrogen fluoride or ammonium
fluoride)
• Wire brush
• Abrasive nylon scrubbing brush
1Unplug the power plug.(Page 15)
Switch the breaker on the distribution board to OFF.(UK)
2Clean with a toilet brush or a similar tool.
■ If the bowl unit is clogged
•Using a manual pump or the like, provide 10 cm or more clearance between the top of the bowl unit and the
water surface.
Use commercially available tools that are made for unclogging the toilet bowl.
(May cause overflow of dirty water and water damage.)
10cm or more
Vinyl sheet, etc.
■ If the floor is dirty
•Clean it with a well wrung cloth. (Not cleaning the floor may cause stains or corrosion.)
•Using the product while standing may cause splashing. To reduce splashing, use the product while seated.
3Insert the power plug.(Page 15)
Switch the breaker on the distribution board to ON. (UK)
Deodorizing filter(Perform monthly)
<If you notice odors>
1Unplug the power plug.(Page 15)
Switch the breaker on the
distribution board to OFF.(UK)
2Remove the deodorizing filter.
•Use the notch of the deodorizing filter to pull
it out.
•Do not pull with undue force. (May cause
damage or malfunctions)
Notch
Deodorizing filter
3Clean with a tool such as a
toothbrush.
•When washing with water, dry off all water
before mounting.
Toothbrush
4Mount the deodorizing filter.
•Push firmly until a click sound is heard.
5Insert the power plug.(Page 15)
Switch the breaker on the
distribution board to ON.(UK)
Wand (Perform monthly)
<Wand cleaning> If you notice dirt
Soft cloth Toilet paper, etc.
(May cause damage.)
1Extend the wand.
•Operate with the buttons on the back side
of the remote control.
(1) Press [MENU].
(2) Use to select
[MANUAL CLEANING].
Press [●ENTER].
(3) Use to select
[WAND CLEANING ON/
OFF].
Press [●ENTER].
•The wand extends and water sprays out for
cleaning.
•The wand automatically retracts after about
5 minutes.
2Wipe with a soft, wet cloth.
•Do not pull, push or press the wand with
excessive force.
(May cause damage or malfunction.)
3Press [STOP] on
the front side of the
remote control.
•The wand retracts.
Deodorizing filter
Wand
Wand Deodorizing filter
Bowl Unit*1 (Approximately once a month)
● To preserve the performance of the photocatalyst cleaning, clean the toilet bowl surface with a toilet brush,
etc. using commercially available hydrochloric acid-based or inorganic acid-based detergent.
*1 Other than the TCF994

34 35
Maintenance
Maintenance Descaling mode
3
Please perform
Descaling mode
Items to prepare
Beaker
(included item) Funnel (included item)
Descaling agent (TOTO specified)
Attention!
● Please use one of the following descaling agents at specified concentration. (Failure to do so may cause
damage)
● If you wish to use other agents, please contact us at the phone number on the back of this manual.
Product name Manufacturer Product name Manufacturer
Sidol®Universal-Entkalker (liquid)
Bref POWER®
Universal-Entkalker (liquid)
Oust®ALL PURPOSE DESCALER
(liquid)
Henkel AG &
Co. KGaA
swril®Anti Calc Bio Power
Concentrate
swril®Anti Calc Bio flüssig
swril®Жидкий очиститель от
накипи CITRUS-CLEAN
Melitta Group
How to dilute
Pour and mix thoroughly
100
Water(40)
50
60
Agent(20)
How to dilute
Pour and mix thoroughly
100
Water(50)
50
60
Agent(10)
■ If the beaker is missing
Please use a clean cup and dilute 20ml of
agent with 40ml of water.
■ If the beaker is missing
Please use a clean cup and dilute 10ml of
agent with 50ml of water.
[SIDOL], [Bref POWER] and [OUST] are registered trademarks of [Henkel AG & Co. KGaA].
[swirl] is a trademrk of company of the [Melitta Group].
Note
● (Rear, bidet and soft) cleansing modes cannot be used from step 2 "Drain water passage" until 60 minutes after step 9
"Descaling (2nd time)" is performed.
(Toilet can be flushed)
● Lid will not open automatically from step 2 "Drain water passage" until 10 minutes after step 9 "Descaling (2nd time)" is
performed. Please open manually.
● If the work is delayed for more than 30 minutes between steps 2 and 9, descaling agent will be drained to the toilet with a
long beep sound to alert.
● If you wish to restart, please wait for 30 minutes and go back to step 1.
1SET DESCALING MODE.
• Operate with the buttons on the back side of the remote control.
(1) Press [MENU].
(2) Use to select
[MANUAL CLEANING].
Press [●ENTER].
(3) Use to select
[DESCALING MODE].
Press [●ENTER].
The display changes to [START
DESCALING MODE?]
Flash
(blue)
Flash
(orange)
Descaling mode <If you think the water pressure has weakened>
<When [POWER] LED (blue) and [ENERGY SAVER] LED (orange) flash>
Remote control
display
MENU
1.MANUAL CLEANING
2.ENERGY SAVER
1/4
>Ɣ(17(5@ PUSH
6(/(&7
MANUAL CLEANING
1.WAND CLEANING
2.DESCALING MODE
1/2
ON/OFF
>Ɣ(17(5@ PUSH
6(/(&7
MANUAL CLEANING
1.WAND CLEANING
2.DESCALING MODE
2/2
ON/OFF
>Ɣ(17(5@ PUSH
6(/(&7
START
DESCALING MODE?
>Ɣ(17(5@ PUSH
SELECT NO

36 37
Maintenance
Maintenance Descaling mode
3
2Drain water passage.
(1) Use to select [YES].
Press [●ENTER].
START
DESCALING MODE?
>Ɣ(17(5@ PUSH
SELECT
YES
Water passage is drained
(for about 30 seconds.)
•You will hear short beep sound while
the work is in progress, and a long beep
sound upon completion.
•Water comes out from around the wand.
•[POWER] LED (blue) and [ENERGY
SAVER] LED (green) will flash.
(The LEDs will continue to flash until the
completion of entire descaling work)
DEVICE IS WORKING
PLEASE WAIT
ABOUT 30 SECONDS
(2) When the beep stops
DOES THE BEEP STOP?
>Ɣ(17(5@ PUSH
Press [●ENTER].
Attention!
● The display shows [DESCALING MODE FILL IN THE DESCALING AGENT (1/2)], but please DO NOT press
[●ENTER] until you have completed filling in descaling agent.
(Descaling will not work correctly)
3Dilute agent with water. (1st time)
(Please see How to dilute on page 34.)
4Remove cover and cap on the top face of product.
Attention!
● Please retain cover and cap.
Cover Cap
5Insert funnel and pour diluted agent. (1st time)
Funnel Beaker
6Perform descaling. (1st time)
(1) Press [●ENTER].
DESCALING MODE
FILL IN THE
DESCALING AGENT (1/2)
>Ɣ(17(5@ PUSH
Descaling will be performed
(for about 30 seconds)
•You will hear short beep sound while
the work is in progress, and a long beep
sound upon completion
•Water comes out from around the wand
and mist nozzle.
DEVICE IS WORKING
PLEASE WAIT
ABOUT 30 SECONDS
(2) When the beep stops
DOES THE BEEP STOP?
>Ɣ(17(5@ PUSH
Press [●ENTER].
Attention!
● The display shows [DESCALING MODE FILL IN THE DESCALING AGENT (2/2)], but please DO NOT press
[●ENTER] until you have completed filling in descaling agent.
(Descaling will not work correctly)
7Dilute agent with water. (2nd time)
(Please see How to dilute on page 34.)
8Pour diluted agent. (2nd time)
(Please see 5on page 37.)
Attention!
● Please wait until funnel is empty.
(Descaling will not work correctly)
Descaling mode <If you think the water pressure has weakened>
<When [POWER] LED (blue) and [ENERGY SAVER] LED (orange) flash> (Continued)
Attention!
● Please wait until funnel is empty.
(Descaling will not work correctly)

38 39
Maintenance
3
Water Filter Drain Valve (Perform once every 6 months)
<If you think the water pressure has weakened>
1Remove the side-panel (left).
(Page 15)
2Close the shutoff valve.
•The water supply stops.
CAUTION
Do not remove the water filter drain
valve while the shutoff valve is open.
(Otherwise, water may leak out)
3Extend the wand.
• Operate with the buttons on the back side
of the remote control.
(1) Press [MENU].
(2) Use to select
[MANUAL CLEANING].
(3) Press [●ENTER].
Use to select
[WAND CLEANING
ON/OFF].
Press [●ENTER] to
extend the wand.
Press [●ENTER] again to
retract the wand.
(Release the pressure from the
water supply pipe.)
4
Unplug the power plug. (Page 15)
Switch the breaker on the
distribution board to OFF. (UK)
5Remove the cover and water
filter drain valve.
• Loosen with a flat-head screwdriver and
then pull.
Cover Water filter
drain valve
6Clean with a tool such as a
toothbrush.
• Also, remove any dust from inside the hole
of the water filter drain valve.
7Reinstall the water filter drain
valve and cover.
• Insert the water filter drain valve and tighten
it securely with a flat-head screwdriver.
Cover
8Insert the power plug.(Page 15)
Switch the breaker on the
distribution board to ON.(UK)
9Open the shutoff valve.
(Page 15)
10 Reinstall the side-panel (left).
(Page 15)
Maintenance Descaling mode
Descaling mode <If you think the water pressure has weakened>
<When [POWER] LED (blue) and [ENERGY SAVER] LED (orange) flash> (Continued)
9Remove the funnel and put cap and cover back on.
Funnel Cover
Cap
10 Perform descaling. (2nd time)
Press [●ENTER].
DESCALING MODE
FILL IN THE
DESCALING AGENT (2/2)
>Ɣ(17(5@ PUSH
Descaling will be performed
( for about 60 minutes)
•Water will be sprayed from around the
wand and mist nozzle at about 20-minute
intervals
After about 60 minutes, descaling agent
will be drained to the toilet
After draining, you will hear a long beep
sound, and the LEDs on product main
body stop flashing
<Descaling complete>
DESCALING IN
PROGRESS
PLEASE WAIT FOR
60 MINUTES
Returns to default display in about 30 seconds.
Attention!
● If the spray is still weak afte performing
Descaling mode
please clean
Water filter drain valve .
● If the symptom does not improve after conducting
Descaling mode
and cleaing
Water filter drain valve
or if
the [POWER](blue) and [ENERGY SAVER](orange)LEDs start to flash, please perform
Descaling mode again .
Water Filter Drain Valve
Attention!
● Please wipe off any spilt agent with
soft wetted cloth
(Failure to do so may cause
discoloration)