Toto MS624214CEF User manual

Warranty Registration and Inquiry
For product warranty registration, TOTO U.S.A. Inc. recommends online warranty registration. Please visit
our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please con-
tact TOTO U.S.A. Inc., Customer Service Department, 1155 Southern Road, Morrow, GA 30260
[phone] or [phone] when calling from outside of U.S.A.
Installation Manual
Manual de Instrucciones
Manuel D’Installation
MS614114CEF(G)
MS614114CUF(G)
MS624214CEF(G)
MS626214CEF (G)
MS644114CEF(G)
MS874114S(G)
MS884114
MS904114
MS934214(E)(S)F
MS934304(E)(S)F
MS964214C(E)F(G)
MS974224C(E)F(G)
MS984244CF(G)

2
ENGLISH
TABLE OF CONTENTS
THANKS FOR CHOOSING TOTO!
The mission of TOTO is to provide the world with healthy, hygienic and more
comfortable lifestyles. We design every product with the balance of form and function
as a guiding principle. Congratulations on your choice.
Thanks for Choosing TOTO®! ...........................................................................................2
Common Tools Needed ....................................................................................................2
Included Parts .....................................................................................................................2
Care and Cleaning..............................................................................................................2
Before Installation...............................................................................................................3
Installation Procedure ........................................................................................................ 3
Maintenance Instructions...................................................................................................5
CEFIONTECT®Cleaning Instructions...............................................................................8
Warranty .............................................................................................................................. 9
Rough-In Dimensions ......................................................................................................26
Replacement Parts ...........................................................................................................27
Check to make sure you have all these parts from the package:
COMMON TOOLS NEEDED
INCLUDED PARTS
MATERIALS REQUIRED:
• Flexible Supply Tube / Connector
• Supply Stop Valve
• 11/64
• 5/16” drill bit for concrete/tile
In the Uni Fit Rough-In box:
China Bowl with Lid Toilet Seat Set
Cover Plate
(2 pieces)
Top Bolt Mount Set
(for seat)
PVC outlet Connection Toilet Mounting Bolt (T-Bolt)
(2 pieces)
T-Bolt Washer
(2 pieces)
T-Bolt Nut
(2 pieces)
Mounting Screw with Washer
(4 pieces)
Anchor
(4 pieces)
• 12” pipe wrench
• 10” adjustable wrench
• Carpenter’s Level
• Tape Measure
• Mounting (T) Bolts & Nuts (2pc)
• Wax Ring / Seal
• Plier
• Screwdriver
• Putty Knife
• Drill
WARNING!
DO NOT USE IN-TANK BOWLCLEANERS.
The use of high concentration of chlorine or chlorine-related products can seriously
TOTO®
by the use of in-tank bowl cleaners.
CARE AND CLEANING

3
ENGLISH
BEFORE INSTALLATION
Read these instructions thoroughly before beginning work.
Please leave instructions for customers. These instruction contain maintenance
and warranty information.
If necessary, remove the existing toilet.
INSTALLATION PROCEDURE
1) The distance between
the center of the toilet
outlet, rough-in "RI": Supply
Valve
Finished Wall
"RI"
C/L
Closet
Flange
“RI” Outlet Connection Part No.
12”
TSU01W.12R / TSU03W.12R / TSU06W.12
(Supplied)
10”
TSU01W.10R / TSU03W.10R
(Optional - Must be purchased separately)
14”
TSU01W.14R / TSU03W.14R
(Optional - Must be purchased separately)
9"
7
"
11"
Please make sure that you have the correct outlet connection part:
2) The water supply must be approximately 8 inches or 10 inches to the left (facing the
1) Clean any debris out of the closet
(see Illustration 1). The bolt should
be inserted into the slot with its
head down and threaded shank
pointed upward.
Ill. 1
IMPORTANT!
Due to the powerful performance of our Cyclone, G-Max, E-Max and Power Gravity
means of installing these toilets in a back-to-back situation is when the toilet drain
to this installation.
Double Combination WYE / 1/8 Bend
YES Double Sanitary Tee / Sanitary Cross NO

4
ENGLISH
2)
In installation instructions found in
the Rough-In box (see Illustration 2).
anchors).
3) Turn the PVC outlet connection upside
down. Firmly press a new wax seal
onto the circular recess around the
outlet opening. Turn the outlet connec-
tion upright and lower it into position
set the wax seal (see Illustration 3).
CAUTION: Do not move the outlet
connection after the wax seal is set.
4) Insert the washers and thread nuts
onto the mounting bolts and hand-
tighten (see Illustration 4). Then tighten
bolts an additional ½ turn. Secure the
back side of the outlet connection to
-
ers.Insert the T-bolts into the slots with
the head down and threaded shank
pointed upward.
NOTE: Level the PVC outlet. Do not
use excessive force.
5) Lift the toilet and gently lower it into
-
lustration 5). Make sure that the spigot
outlet of toilet slips into the rubber
the openings in the base of toilet.
Insert the washer and thread nuts
onto the bolts and hand tighten. Then
tighten the bolts an additional ½ turn.
Install the cover plates.
WARNING! Do not over-tighten the
nuts. Damage to china or plastic
parts may result.
Wax Seal
Ill. 3
T-Bolts
Nut
Bolt
Slot
Ill. 4
Nut
Washer
Cover
Plate Spigot
Outlet
Rubber
Sleeve
Ill. 5
C
2"
B
A
Finished Wall
C/L
Floor
Closet Flange
Ill. 2
INSTALLATION PROCEDURE

5
ENGLISH
6) The supply stop should be installed per
the supply stop instruction at the location
shown in the Before Installation section.
hose to supply stop.
CAUTION: Hand-tighten only.
Open the supply stop, checking for leak-
age. Slightly re-tighten if necessary. The
water supply pressure should be 20 to 80
psi static.
7) NOTE:
are needed. The water will automatically
stop at proper level.
-
per valve for proper operation. Make sure
in its proper position.
8) Install the toilet tank lid onto the toilet tank
top.
9) Install the toilet seat onto the toilet bowl
(see Illustration 7). (Top Mount Bolt Set is
included with the bowl). Insert the rubber
bushing nuts into the bowl seat holes.
NOTE: Remove the existing seat if neces-
sary.
Place the seat on the bowl and rotate the
hinge unit into place while holding seat
down on the bowl. Fasten and tighten
the bolt from the top with a screwdriver.
Replace the bolt cap and the lower lid (if
necessary).
Seat Bolt
Rubber
Brushing
Nut
Ill. 7
MAINTENANCE INSTRUCTIONS
Fill Valve Replacement Procedure
1) Shut off the water supply to the toilet.
2) Flush toilet and remove remaining water from tank with a sponge.
NO position that does not
interfere with the trip lever operation.
Ill. 6
Water
Inlet
Washer
Coupling
Nut
Trim Plate
Flexible
Supply
Hose (not
supplied)
Valve
Nut
Compression
Valve
Nipple
INSTALLATION PROCEDURE