Toto washlet User manual



■MASSAGE
Standard Use
Essential Points of Use!
Press a button on the remote control; a beep sounds when the top unit receives the signal.
Washing
Drying
Stopping Stops the
operation.
Cleanses your rear.
For washing rear using mild water pressure.
Cleanses your front (for ladies).
OSCILLATING
󲄂If you press the button again
during use, the wand moves
back and forth so that you can
wash your rear thoroughly.
Dries wet parts using
warm air.
Low Battery
warning mark
POWER
DEODORIZER
󲄂 Increases air suction
power for powerful
deodorization.
● The function that can be used when you press the “REAR”,
“SOFT REAR” or “BIDET” button during use.
󲄂 The wand returns to the standard
position (3rd step) each time
the wash button (“REAR”, “SOFT
REAR” or “BIDET”) is pressed.
󲄂 If you press the water pressure
adjustment button, the lamp lights for
about 10 seconds at the preset position.
󲄂 If you press a wash button (Rear, Soft
or Bidet), the lamp lights for about 10
seconds at the preset position.
■WATER PRESSURE ADJUSTMENT (5 steps.) ■WASH POSITION
ADJUSTMENT (5 steps.)
󲄂 Washes with the water
pressure pulsating
between soft and strong.
Setting confirmation
󲄂The current settings
can be checked from
the LED.
OPEN /
CLOSE
Full flush
Half flush
Opens and closes the toilet seat.
Toilet lid opens and closes.
Flushing
◆“Washlet” is a registered trademark of TOTO LTD.
■The toilet bowl can also be flushed
clean by the FLUSHING button.
■
Y ou can flush the toilet bowl using the manual handle or
manual lever (for toilet bowl flushing in power failure)
during power failure.
Hand lever Manual handle

Hand lever
2017. 8. 2
Product functions and shape may differ depending on the model.
FLUSH buttonFLUSH button

Press the button selected in step repeatedly
until a desired temperature level lights up.
2
1

Temperature Adjustment
Press the button of the temperature you want
to change.
※There is no "OFF" setting for drying.
Energy Saver Features
Timer energy saver
When the time (1:00 am) you want to start energysaving function is
reached, press the button repeatedly until the "6" LED lights up.
1
If the button is not pressed for about 10 seconds, the
temperature adjustment LED will go off, but the setting
will be retained.
If the temperature adjustment LED goes out before the
setting is completed, start all over again at step .
Auto energy saver
Auto energy saver plus
When using energy-saving function for 6 hours(1:00 - 7:00am).
Example

1
Toilet seat
temperature adjusutmentbutton
Temperature can be changed to "Warm Water",
"Toilet Seat" and "Warm Air" (only models equipped
with warm air dryer)
Drying air temperature
adjustment button
Displaying
the temperature level of
the pressed button
Warm water temperature
adjustment button
OFF
LOW
MEDIUM
HIGH 6 hours
9 hours
LED goes out.
OFF

How to Use
More comfortable! More Energy-Savings!
The Washlet memorizes the time slot when the toilet is used less frequently
and lowers the toilet seat temperature automatically to save energy.
In addition to the auto energy saver feature, it automatically turns off the
toilet seat heater during time periods when the toilet is never used.
Once set, the toilet seat heater turns off everyday at that time to save energy.
(The energy-saving time period can be set to 6 or 9 hours.)
LED goes out.
Setting completed
Press the

ON
Lit (Green)
To turn the auto energy saver
"ON"
ON
Lit (Orange)
To turn the auto energy saver
plus "ON"
OFF
LED goes out.
To turn "OFF"