5
Before First Use:
Read all instructions and safety information carefully before first use. Please retain this information
for future reference.
1. Remove the appliance from the packaging and check for any visible signs of damage to the
unit or charging cable.
2. Your appliance is now ready for normal use.
3. Dispose of the packaging in a responsible manner.
4. Place the unit on a firm and level surface.
5. Plug the micro USB charging cable into the charging interface at the rear of the unit. Plug the
other end into a compatible device or 220V mains power adapter.
Note: Fully charge the unit before first use if using remotely and not operating whilst connected to
an external power supply.
Battery Status:
1. The function indicator light will illuminate red whilst charging and go off once fully charged.
2. If there is insufficient battery power, the function indicator light will flash red 3 times and then
the unit will automatically shut down.
Using Your Appliance:
1. Place the unit on a firm and level surface.
2. If operating without battery charge, connect the USB cord to the unit and suitable compatible
power supply.
3. Touch the Function Button to power the unit ON.
4. Press the Function Button to cycle between the speed options:
Low – Green Indicator Light
Medium – Blue Indicator Light
High – Light Blue Indicator Light
Off – No Indicator Light
5. Press and hold the Function Button to enter ‘Natural’ mode, in which the fan will randomly
change between the 3 speed settings. The Indicator Light will change colours accordingly. To
exit ‘Natural’ mode, press the Function Button once.
Troubleshooting:
Questions Answers
The unit will not work. Ensure that the battery is charged or that the unit is connected to a
suitable power supply.
The unit will not
charge. Ensure that the supplied cable is used and correctly connected to a
suitable device or power outlet.
Cleaning & Care:
WARNING! Before cleaning and maintenance, switch the appliance off and disconnect from a
power supply.
• Do not immerse any part of the appliance or power cord in water or any other liquid.
• Use a soft damp cloth to wipe the surface. Then dry with a soft cloth. Avoid using detergent,
chemicals or abrasive cleaners as these may cause damage to the appliance.
Storage:
• Once the fan has been cleaned, store in a cool dry place out of reach of children.
