Tp-link Kl50b User manual

User Guide

Kasa Filament Smart Bulb

KL50B / KL60B

1910012650 REV1.0.0

Contents

About This Guide ···················································· 1

Introduction ······························································· 2

Set Up Your Smart Bulb······································· 3

Main Device Controls ·········································· 4

Congure Your Smart Bulb································ 5

Create Scenes·························································· 7

Discover Kasa··························································· 8

Reset Your Smart Bulb············································ 9

Authentication ······················································· 10

About This Guide

This guide provides a brief introduction to Smart Bulb and the Kasa Smart app, as well as regulatory information.

Please note that features of Smart Bulb may vary slightly by model and software version. All images, parameters and descriptions in this guide are only

examples and may not reect your actual Kasa experience.

Conventions

In this guide, the following convention is used:

Convention Description

Teal Key information appears in teal, including management page text such as menus, items, buttons and so on.

Underline Hyperlinks are in teal and underlined. You can click to redirect to a website.

Support

• Specications can be found on the product page at https://www.tp-link.com.

• Our Technical Support and troubleshooting information can be found at https://www.tp-link.com/support/.

Introduction

The Smart Bulb is part of the Kasa smart home family of products, including plugs, switches, cameras and more. You can adjust brightness, track

energy consumption, set schedules and timers, and set an alarm that wakes you naturally by simulating the sunrise. Group lights together to control

your smart bulbs more easily and create your own scenes.

You can also control multiple smart home devices with the Kasa Smart app or use your voice for added convenience. With Kasa, your home is never

more than a few taps away.

• No Hub Required - The Smart Bulb screws in just like an ordinary bulb. Simply download the Kasa Smart app, connect to Wi-Fi and enjoy. No special

hardware is needed.

• Scheduling - Set your smart bulb to turn on or o while you are home or away.

• Energy Saving - Reduce power usage without compromising on light quality.

• Voice Control - Pair the smart bulb with Amazon Echo, Dot and Tap or Google Assistant for voice control.

• Remote Control - Set up the smart bulb easily and control from anywhere with the free Kasa Smart app.

KL50B (Dimmable, Soft White) KL60B (Dimmable, Warm Amber)

A dimming range from 1%-100%, lighting for any

occasion

A dimming range from 1%-100%, lighting for any

occasion

Set Up Your Smart Bulb

Follow the steps below to set up your smart bulb via the Kasa Smart app.

Step 1. Download Kasa

Get the Kasa Smart app from the App Store or

Google Play.

Step 2. Log In

Open the app, and log in with your TP-Link ID.

If you don't have an account, create one rst.

Step 3. Add Device

Tap the button in the Kasa Smart app and

select Add a Device > Smart Lights > Filament

LED Bulb. Follow app instructions to complete

the setup.

Main Device Controls

After you successfully set up your Smart Bulb, you will see the Devices page of the Kasa Smart app. Tap a smart bulb to see the Smart Bulb page.

Devices Page

This page lists your smart bulbs, and other

smart home devices if any. You can instantly

turn on/o the bulb.

Smart Bulb Page

On the Devices page, tap a Smart Bulb, then

you can have more detailed configuration

options about your bulb.

*The image is for demonstration only.

OFF

Congure Your Smart Bulb

On the Smart Bulb page, you can adjust the light temperature, set schedules, track energy consumption and change settings.

Presets and Recents

Tap to add presets and apply what you have

set recently to your smart bulb.

Create Event

Tap to set schedules for your smart bulb

to simplify your daily routine by creating

automatic On/O action.

Congure Your Smart Bulb

On the Smart Bulb page, you can adjust the light temperature, set schedules, track energy consumption and change settings.

Usage

Tap to view and track energy consumption.

Device Settings

Tap to view and change the settings of your

smart bulb. Moreover, you can enable remote

control for ease of use.

Create Scenes

A scene is a preset group of smart devices that can be programmed, customized and activated simultaneously at the touch of a button from your

smart phone or tablet, allowing you to easily set your mood, activity or t any special occasion. This page allows you to preset how your smart home

devices should act automatically at special occasions.

Discover Kasa

Use the Kasa Smart app to pair your Smart Bulb with Amazon Alexa or Google Home Assistant and enjoy a full hands-free experience. Kasa helps

manage the rest of your smart home too, working with Samsung SmartThings to trigger changes when you arrive home or leave for the day.

Launch the Kasa Smart app and go to Add Device > WORKS WITH KASA > Amazon Alexa / Google Assistant/ Samsung SmartThings for

detailed instructions.

Reset Your Smart Bulb

There are two types of reset available: a soft reset which resets the Wi-Fi settings only, and a factory reset that erases all of your custom settings and

restore them to factory defaults.

On the Devices page on Kasa app, swipe left the bulb and tap Delete.On the Kasa app, tap the smart bulb and tap > Remoce Device.

Soft Reset

1. Turn the light switch controlling the bulb to the OFF position.

2. Flip the light switch on and o 5 times (the time duration is around 1 second), and stop when the light is on for the third time. 3 times blinking after

that indicates a successful soft reset.

Factory Reset

Method 1:

1. Turn the light switch controlling the bulb to the OFF position.

2. Flip the light switch on and o 10 times (the time duration is around 1 second), and stop when the light is on for the fth time. 3 times blinking after

that indicates a successful factory reset.

Method 2:

Authentication

Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product

names are trademarks or registered trademarks of their respective holders.

No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or

FCC Compliance Information Statement

Product Name: Kasa Filament Smart Bulb

Model Number: KL50B / KL60B

Component Name Model FCC ID

Kasa Light Wi-Fi Module KLM100 TE7KLM100

Responsible party:

TP-Link USA Corporation, d/b/a TP-Link North America, Inc.

Address: 145 South State College Blvd. Suite 400, Brea, CA 92821

Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6803

E-mail: [email protected]om

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the

equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications

could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be

co-located or operating in conjunction with any other antenna or transmitter.

“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this

transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction

with any other antenna or transmitter.”

We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards,

FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

Issue Date: 2019-09-01

FCC Compliance Information Statement

Product Name: Kasa Light Wi-Fi Module

Model Number: KLM100

Responsible party:

TP-Link USA Corporation, d/b/a TP-Link North America, Inc.

Address: 145 South State College Blvd. Suite 400, Brea, CA 92821

Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6803

E-mail: [email protected]om

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the

equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications

could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be

co-located or operating in conjunction with any other antenna or transmitter.

“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this

transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in

conjunction with any other antenna or transmitter.”

We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards,

FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

Issue Date: 2019-09-01

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take

adequate measures.

OPERATING FREQUENCY (the maximum transmitted power)

2412 MHz -2472 MHz (20dBm)

No restrictions exist in the use of radio frequencies or frequency bands in all EU member states and EFTA countries.

EU declaration of conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU,

2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.

RF Exposure Information

This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way

of health protection.

The device complies with RF specifications when the device used at 20 cm from your body.

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-

exempt RSS(s). Operation is subject to the following two conditions:

1 ) This device may not cause interference.

2 ) This device must accept any interference, including interference that may cause undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement

économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:

1 ) L’appareil ne doit pas produire de brouillage;

2 ) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated

with minimum distance 20cm between the radiator & your body.

Déclaration d’exposition aux radiations:

Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être

installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

Korea Warning Statements

당해 무선설비는 운용중 전파혼신 가능성이 있음.

NCC Notice

󴱅󳞲󽘑

󱡽󳸺󱟽󱶧󵠈󹧗󴰻󸯷󲺺󳘮󹧗󴟆󶙹󵢻󸲖󴰢

󶖈󱻈󱛔󴒎󶪅󲖸󳑎󸑃󸗏󱿷󴏵󱙴󱟽󱶧󵠈󲺺󹰞󹧗󴟆󾗚󹪭󶪅󸎋󱿔󾗚󱮸󱿡󾗗󲇣󷳌󳦕󱡋󵫞󶻰󲕔󱘗󳕅󳸓󷋩󸙗󴇠󹰞󵠈󾗗󱶩󲡱󱶧󵠈󳦕󸙗󴇠󱽓󸎅󸌺󱙴󵙗󳘮󳦕󱶧󷃬󾗘

󶖈󱻈󲒬󴒎󱟽󱶧󵠈󲺺󹰞󹧗󴟆󱙴󱡋󵫞󱘗󳕅󳔈󹯁󹴔󷍶󲶿󾇄󱾜󳌢󳺁󱿷󴰢󸶳󸀅󽘫󶪅󵵏󵢮󴈅󳌢󳺁󵢮󸝮󴂹󾗚󳤑󶓉󱼑󱧃󵫞󾗚󱘼󳻷󲉆󷋼󵎣󳌢󳺁󴂹󳿑󳕅󶱳󶲖󱡋󵫞󾗘󱴚󹯋󱿷󴰢󸶳

󱣭󾗚󳬙󱡽󹧗󱣭󸉫󲷢󱠓󴘁󱙴󵎣󶬢󹧗󱣭󾗘󱟽󱶧󵠈󲺺󹰞󹧗󴟆󹧟󳖟󱾭󱿷󴰢󸶳󱣭󳦕󳉉󴘁󾗗󶋑󲶙󱝤󱾜󹃕󵳟󵫞󹧗󴰻󸯷󲺺󳘮󹧗󴟆󸎅󱨵󱙴󳌢󳺁󾗘

BSMI Notice

󲶿󾇄󸔋󸏪󱾜󴱅󳞲󱛓󹯋

 󸒿󱡋󵫞󱽓󸄅󹧗󴻣󱡹󳤑󲏝󳦕󱿌󷃬󳬟󵐲󴉆󵫕󲄘󴱅󴁩󵵙󹧗󴻣󹱔󲖸󱡋󵫞󴉆󵫕󲄘󾗘

 󴸃󵁇󴉆󵫕󲄘󱙴󱴚󸒿󱭴󳫌󳯩󹧗󴻣󶬢󾗘󸒿󱹂󱡋󵫞󴵫󺂴󾗗󲏲󹨴󴸃󵁇󱶎󳦕󵄩󳉳󸷯󸀅󴸃󵁇󾗘

 󴱅󳞲󹡩󵁱󾗚󸒿󱹂󲻀󴬱󳦕󱯇󱝏󴵫󺂴󵀾󵈖󱳭󴉆󵫕󲄘󱘔󾗘

 󳱥󴜖󷌦󹝻󱿂󱡹󸶳󹲱󱡋󵫞󾗚󱝤󶃘󱣤󴉆󵫕󲄘󵵙󳸞󱠓󱿔󹪳󱘼󹡩󴦛󸸶󵓉󾗚󸒿󱹂󲛈󲜒󳦕󸉝󷤩󹝻󱿂󾗘

 󸒿󱹂󲻀󴉆󵫕󲄘󶷉󳻿󳿕󹪳󸳽󵓉󴻣󵵙󲔳󳿑󾗘󹢲󹪭󴈅󴦜󳋃󵵙󸶳󹲱󾗚󲀥󱴒󱘗󱿔󳻿󲔩󲸺󹝸󱟺󶷉󱙆󾗘

 󸒿󱘗󸉕󶊺󷋩󳨈󹝻󴟆󴩞󾗚󱘗󸉕󲍓󸏲󷋩󸀅󶪿󱣽󴉆󵫕󲄘󾗚󸒿󵫬󳯨󴣻󵵙󲻁󴘁󱜤󲠇󸷯󸀅󴦞󹯋󳉉󱠓󾗘

󹢔󵫞󵙀󸡗󲀰󴈅󳜶󴰄󴝇󶆻󶿌󴁩󴇦

󵫕󲄘󱭬󱝾󱿽󶍷

󹢔󵫞󵙀󸡗󱾛󱯇󱹫󲶙󶕸󷳋

󹈬



󹒙



󴭰



󱮺󱫧󹉩



󲡕󴼤󶿂󷔦



󲡕󴼤󱛔󷔦󹂮



      

󲡋󴩞      

󹧖󴻣󱡹󳤑󴋄      

󱨴󶻭 󾖶 󸤥󱲡 󾖶󱾛󾖶 󸤥󱲡 󾖶󶥚󳬘󹢔󵫞󵙀󸡗󱙴󵵑󱲵󴪒󲀯󹄡󸤥󱲡󵵑󱲵󴪒󲀯󹄡󲙨󴻬󱦊

󱨴󶻭 󾖶  󾖶 󶥚󳬘󸐋󹯋󹢔󵫞󵙀󸡗󱙴󵵑󱲵󴪒󲀯󹄡󴉃󸤥󱲡󵵑󱲵󴪒󲀯󹄡󲙨󴻬󱦊

󱨴󶻭 󾖶󾖶󶥚󳬘󸐋󹯋󹢔󵫞󵙀󸡗󵋡󳯸󹢲󹯋󵸂

Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам,

що передбачені чинними законодавчими актами України.

Safety Information

• Keep the device away from water, fire, humidity or hot environments.

• Do not attempt to disassemble, repair, or modify the device.

• Do not use the device where wireless devices are not allowed.

• Only use the control provided with or specified by these instructions to control this device.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to

improper use of the device. Please use this product with care and operate at your own risk.

WARNING:

• RISK OF ELECTRIC SHOCK OR BURNS. Switch OFF the light switch controlling the bulb and WAIT for the bulb to cool down before attempting to

change it.

• Do not install the Smart Bulb with wet hands or when standing on wet or damp surfaces.

• Compatible with regular light switches. Not suitable for use with standard in-wall dimmers. Not compatible with photosensors, motion sensors, or

timers. Dimmable via the app only.

• NOT for use in totally enclosed or recessed luminaires. Suitable for damp locations.

• NOT FOR EMERGENCY LIGHTING.

• The increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair contact making and lamp retention.

• Operating Temperature: -15~40(5~104)

• Storage Temperature: -20~70(-4-158)

• Operating Humidity: 10%~90%RH, Non-condensing

• Storage Humidity: 10%~90%RH, Non-condensing

Explanation of the symbols on the product label

Symbol Explanation

Indoor use only

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to

European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

This manual suits for next models

Table of contents

Other TP-Link Network Hardware manuals