TP-Link TL-SF1008D User manual

Switch TP-Link TL-SF1008D
Não Gerenciável
O TL-SF1005D fornece uma maneira fácil de expandir sua
rede com fio. Todas as portas RJ45 suportam MDI / MDIX
automático, eliminando a necessidade de se preocupar
com o tipo de cabo a ser usado. Com o modo full duplex,
os comutadores podem processar dados a uma taxa de até
200 Mbps, sendo a escolha ideal para expandir sua rede
com fio de alto desempenho.
www.bztech.com.br

CONTENT
English··································································1
български ····························································4
Bosanski·······························································8
Čeština ·······························································11
Eesti ···································································14
Hrvatski·······························································17
Latviešu ······························································20
Lietuvių·······························································23
Magyar································································27
Македонски························································30
Polski··································································34
Русский язык ·····················································38
Româna······························································42
Shqip ··································································45
Slovenčina··························································48
Slovenski ····························································51
Srpski jezik/Српски језик····································54

FCC STATEMENT
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1）This device may not cause harmful interference.
2）This device must accept any interference received,
including interference that may cause undesired
operation.
Any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment.
CE Mark Warning
This is a class B product. In a domestic environment, this
product may cause radio interference, in which case the
user may be required to take adequate measures.

English
1
Package Contents
The following items should be found in your box:
¾One TL-SF1005D/TL-SF1008D/TL-SF1016D Switch
¾One Power Adapter
¾This User Guide
Note:
The wall-mounting screws are not provided. Please
contact your distributor if any of the listed items are
damaged or missing.
The Switch mentioned in this User Guide stands
for TL-SF1005D/TL-SF1008D/TL-SF1016D 10/100Mbps
Desktop Switch without any explanation. For Simplicity, we
will take TL-SF1016D for example throughout this Guide.
TL-SF1016D can be mounted on a wall.

English
2

Refer to the steps below to mount the Switch on a Wall.
1. Drill two holes into the wall. Insert a screw into each
hole and leave a part of its head exposed.
2. Place the two wall-mounting slots over the screws and
slide the Switch down to fasten it.
Note:
Without slots on the bottom, TL-SF1005D or TL-SF1008D
cannot be mounted on a wall.

English
3
The Switch's LEDs are located on the front panel:
LED Status Indication
On The switch is powered on.Power
Off No Power Source.
*Please check if the power cord is
connected to the Switch properly,
and make sure the power is ON.
On The corresponding ethernet port
is connected to a network device.
Flashing Data is being transmitted or received.
Ethernet
LED
Off No device is connected to the
corresponding port.
*Please check if the cable
connectors are firmly plugged into
the switch and the device, and
verify the connected device is
turned on and working well.
COPYRIGHT & TRADEMARKS
is a registered trademark of TP-LINK
TECHNOLOGIES CO., LTD. Other brands and product
names are trademarks or registered trademarks of their
respective holders.
Copyright © 2012 TP-LINK TECHNOLOGIES CO., LTD.
All rights reserved.
http://www.tp-link.com

български
4
Съдържание на опаковката
Вкутията ще намерите следните артикули:
¾Един настолен комутатор
¾Един адаптер за захранване
¾Това ръководство на потребителя
Забележка:
Не са предоставени винтовете за стенен монтаж. Моля,
свържете се свашия дистрибутор, ако някои от
описаните артикули са повредени или липсват.
Комутаторът, споменат втова ръководство на
потребителя, означава настолен комутатор без никакво
обяснение. За простота, втова ръководство ще вземем
за пример модела TL-SF1016D.

български
5
Следвайте стъпките по-долу, за да монтирате
комутатора на стена.
1. Пробийте две дупки встената. Поставете по един
винт във всяка дупка иоставете част от главата му
навън.
2. Поставете двата прореза за стенен монтаж върху
винтовете иплъзнете комутатора надолу, за да го
закрепите.
Забележка:
Ако няма прорези на долната част, TL-SF1005D/
TL-SF1008D не може да се монтира на стена.

български
6
Светодиодните индикатори на комутатора са
разположени на предния панел:
Светодиод Състояние Индикация
Свети Комутаторът евключен
към захранване.
Захранване
Не свети Няма източник на
електрическо
захранване.
*Моля, проверете дали
захранващият кабел е
свързан правилно към
комутатора исе
уверете, че
захранването е
включено.
Свети Съответният Ethernet
порт есвързан към
мрежово устройство.
Мига Предават се или се
получават данни.
Светодиод
за Ethernet
Не свети Към съответния порт
няма свързано
устройство.
*Моля, проверете дали
кабелните конектори са
добре поставени в
комутатора и
устройството исе
уверете, че свързаното
устройство евключено
иработи добре.

български
7
АВТОРСКО ПРАВО ИТЪРГОВСКИ МАРКИ
ерегистрирана търговска марка на
TP-LINK TECHNOLOGIES CO., LTD. Други марки и
продуктови имена са търговски марки или
регистрирани търговски марки на съответните им
притежатели.
Copyright © 2012 TP-LINK TECHNOLOGIES CO., LTD.
Всички права запазени.
http://www.tp-link.com