TP-Link TL-SF1008P Installation instructions manual

Wall Mounting Guide
Wall Mountable Switches

1.1 Wall Mounting Preparation
Before mounting the switch, you need to prepare the tools below:
ǴA screw driver.
ǴTwo screws which complies to the corresponding standard. For details, see Wall
Mounting Specification.
1.2 Wall Mounting Procedure
On the bottom of the panel, there are two mounting holes. You need to drive two screws
into the wall, then mount the switch on the wall. Note that the switch should be mounted
on the wall upright rather than sideways.
1) Determine the location on the wall where you want to mount the switch.
2) Mark the wall where the two mounting holes are. The distance between the two marks
must be the same as that between the two mounting holes of the switch. For the wall-
mounting-holes distance, see Wall Mounting Specification.
3) Drive the screws into the wall at the marks using the screw driver. For the Screw-
Head-to-Wall Minimum Distance, see Wall Mounting Specification.
4) Mount the switch on the wall.
1.3 Wall Mounting Specification
Model
Screw Standard of
ANSI B1.1
Minimum Length
of Screw
Screw-Head-to-Wall
Minimum Distance
Wall-Mounting-Holes
Distance
LS105G 4#, (5#), 6# 7mm 1.5mm 76mm
LS108G 4#, (5#), 6# 7mm 1.5mm 65mm
LS1005G 4#, (5#), 6# 7mm 1.5mm 38mm
LS1008G 4#, (5#), 6# 7mm 1.5mm 48mm
TL-SF1005LP 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm
TL-SF1005P 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm
TL-SF1006P 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm
TL-SF1008LP 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm
TL-SF1008P 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm
TL-SF1009P 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm
TL-SG1005LP 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm
TL-SG1005P 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm
TL-SG1008D 4# 8mm 2mm 100mm
TL-SG1008P 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm

Model
Screw Standard of
ANSI B1.1
Minimum Length
of Screw
Screw-Head-to-Wall
Minimum Distance
Wall-Mounting-Holes
Distance
TL-SG105 4#, (5#), 6# 7mm 1.5mm 39mm
TL-SG105E 4#, (5#), 6# 7mm 1.5mm 52mm
TL-SG105-M2 4#, (5#), 6# 7mm 1.5mm 150mm
TL-SG105PE 4#, (5#), 6# 7mm 1.5mm 39mm
TL-SG105S 4#, (5#), 6# 7mm 1.5mm 39mm
TL-SG108 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm
TL-SG108E 4#, (5#), 6# 7mm 1.5mm 110mm
TL-SG108-M2 4#, (5#), 6# 7mm 1.5mm 150mm
TL-SG108PE 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm
TL-SG108S 4#, (5#), 6# 7mm 1.5mm 94mm
TL-SG116 4#, 6# 8.5mm 1.5mm 200mm
TL-SG116E 4#, 6# 8.5mm 1.5mm 200mm
TL-SG1210MP 4#, (5#), 6#, 8# 8.5mm 1.5mm 150mm
TL-SG1210MPE 4#, (5#), 6#, 8# 8.5mm 1.5mm 150mm
TL-SG1210P 4#, (5#), 6#, 8# 7mm 1.5mm 150mm
TL-SG2008 4#, (5#), 6# 7mm 1.5mm 150mm
TL-SL1210MP 4#, (5#), 6#, 8# 7mm 1.5mm 150mm
TL-SX105 4#, (5#), 6# 7mm 1.5mm 150mm