Traceable 5660 User manual

Traceable® Thermohygrometer
with Clock
Temperature
Humidity
Clock
Memory select
Memory clear
Battery cover
Integrated magnet
Integrated stand
INITIAL SETUP
Remove battery cover and insert
batteries.
Once batteries are installed,
press button to select setting.
 Therstsetting,Hours,willash
on display.
Press “ ” and “ ” buttons to
adjust setting.
 Oncenished,press button
to save setting and proceed to
Minutes,12/24Hour,etc.
Complete all settings to
conguredevice:
• Hours
• Minutes
• 12 or 24 hour format clock
• Temperature units
Replace battery cover.

Item No. 56000-10
Model No. 5660
©2022 1065T6_M_92-5660-00 Rev. 0 09022022
WARRANTY, SERVICE, OR RECALIBRATION
12554 Old Galveston Rd. Suite B230
Webster, Texas 77598 USA
Ph. 281-482-1714 • Fax [phone]
[email protected]
traceable.com
Traceable®Products are ISO 9001:2018 Quality-
Certied by DNV and ISO/IEC 17025:2017
accredited as a Calibration Laboratory by A2LA.
DISPLAY DETAILS
Current temperature
Temperature memory
Current humidity
Humidity memory
Current time
CLEARING INDIVIDUAL READINGS
1. Press select button until desired reading to be
cleared is ashing.
2. Press and hold clear/revert button for 3 seconds
to clear reading.
CLEARING ALL MEMORY READINGS
1. Press and hold clear/revert button for 3 seconds
to clear all memory readings.
Thermohygrometer
with Clock
Quick-Start Guide