Trafimet CB 100 Automatic User manual

®
®
®
®
CB 100 MANUAL
CB 100 P AUTOMATIC
Check the state of the swirl ring. Air holes must be open.
If not, the low cooling system will damage the torch head.
Controllare lo stato di efficienza del diffusore aria, che deve
sempre presentare i fori di accesso aria liberi da occlusioni.
Uberprüfen des Luftverteilers, das die Löcher nicht verstopft sind.
Contrôler le rendement du diffuseur d'air dont les trous
d'accès d'air doivent rester libres de toutes occlusions.
Operating instructions
The excessive wear of tip and electrode may cause some damage
to the torch head. Replace the electrode before its total
consumption as well as the tip when showing an irregular hole
or an increased diameter.
Modalità d'uso
L'eccessiva usura di cappa ed elettrodo può creare danni
al corpo torcia, sostituire l'elettrodo prima del totale consumo
dell'inserto e la cappa quando presenta un foro irregolare
o di diametro maggiorato.
Gebrauchsanweisung
Elektrode und Schneiddüsen sollten auf den Verschleiß hin
überprüft werden, überhöhte Beanspruchung führt zu
verschlechterten Schneidergebnissen und kann zu einer
Beschädigung des Brennerkörpers führen.
Modalite d'usage
L'usure excessive de la tuyère et de l'electrode peuvent causer
des dommages au col de cygne, remplacer l'electrode avant
l'usure totale de l'insert en HF ainsi que la tuyère si celle-ci
présente une "usure irrégulière" ou un diamètre majoré.
Warning
For proper use and maintenance refer to the user's handbook attached to the torch.
Attenzione
Consultare il manuale di uso e manutenzione allegato alla torcia.
Achtung
Bitte unbedingt das beigefügte Bedienungshandbuch beachten.
Attention
Consultez le manuel d'utilisation et de manutention joint à la torche.
PD 26-11
CV 94
Flowmeter
Flussometro
Durchflussmessrohr
Indicateue
d'écoulement
CB 100
MAX
MIN
PACKAGING
Torch (1)
Tip (10)
Electrode (10)
Torch head (1)
Diffuser (2)
Nozzle
(2 or 4)
www.trafimet.com
TRAFIMET spa claim that all items on this catalogue are manufactured in conformity
with the "low voltage" CE 73/23 directive as per EN 60974-7 standard.
The company reserve the right to modify any products without notice.
TRAFIMET spa is the registered owner of all trademarks, patents and models.
Copyright © 1997 Trafimet Spa. All rights reserved. Print date 10/00 EA 0580
EN 60974-7

CB 100 P complete torch m Adaptor
PA 1216 6 1/8 G
PA 1219 6 Central
PA 1225 6 1/8 G
PA 1227 6 Central
RUBBER CABLE
STEEL CABLE
CB 100 complete torch m Adaptor
PA 1230 6 1/8 G
PA 1232 6 Central
NEW
Submariner handle
CB 100CB 100 P
6 m
1 m
0.80 Kg
Technical data CB 100 • CB 100 P
Voltage class M
Standard lenght 6 m
Air consumption 180 l/min
Air pressure 5 bar
Duty cycle 100% 70 A
Duty cycle 60% 100 A
296
Ø 35
386
90
GR 60 1509
Swirl ring extractor
Estrattore per diffusore
Ausdreher für Wirbelring
Extracteur pour diffuseur
BX 70
TP 83
Submariner handle
EA 23
PF 38
EA 132 OR
EA 131
OR 1398
FH 214 1378
PE 09 1377
PH 174
Cable assembly
1/4 G
BX 185
PH 162 Air and power cable
PR 34 1376
PD 26-11 1371
PD 26-13 1372
PD 26-16 1373 • Standard
PD 26-18 1374
PH 171
Cable assembly
PH 107
Air and power cable
CY 35
CY 36
FY 23 Central
CV 22 169
CV 21 155
CV 12 1408
CV 11 1386
CV 38
1/8 G
QB 164
Cable assembly cover (per meter)
PD 28-13
PD 28-16
PD 28-18
PC 37
BX 138
Control leads
(per meter)
BX 269
BX 125
Pilot arc lead
(per meter)
BX 207
BX 211
CV 9 CV 8
PE 09 1377
PR 45 1517
PD 30 1369
(50 A max)
PD 25-14
(90 A max)
PD 25-16 (120 A max)
PD 25-18 (150 A max)
PC 38
FH 158
EA 229 OR
EA 131 OR - 1398
FH 214 1378
PC 37
PF 37
PD 26-11 1371
PD 26-13 1372
PD 26-16 1373 • Standard
PD 26-18 1374
PR 34 1376
PE 09
1377
CY 36
PH 247 (1/8 G)
PH 246 (1/4 G)
Steel cable assembly
PH 171
Rubber cable assembly CY 35
FY 23 Central
6 m
TP 61
PH 217
Steel cable assembly cover
1/8 G
1/4 G