Transcend SSD18C3 User manual

User’s Manual
USB 3.0 Portable Solid State Drive
SSD18C3
(Version 1.0)

Table of Contents
Introduction..........................................................................................1
Package Contents................................................................................1
Features................................................................................................2
System Requirements .........................................................................2
Safety Precautions ..............................................................................3
General Use................................................................................................................... 3
Backing up Data............................................................................................................ 3
Transporting.................................................................................................................. 3
Power............................................................................................................................. 3
Reminders ..................................................................................................................... 4
Product Overview ................................................................................5
Connecting to a Computer..................................................................6
One Touch Backup..............................................................................9
Turbo Mode ..........................................................................................9
Disconnecting from a Computer......................................................10
Windows



.................................................................................................................... 10
Mac
®
OS....................................................................................................................... 10
Linux
®
.......................................................................................................................... 11
Formatting the Solid State Drive......................................................11
Windows
®
XP/7/Vista .................................................................................................. 11
Mac
®
OS....................................................................................................................... 12
Linux
®
.......................................................................................................................... 14
Troubleshooting ................................................................................15
Specifications ....................................................................................17
Three-year Limited Warranty............................................................18

1
Introduction
Congratulations on purchasing Transcend’s SSD18C3.This rugged, ultra-fast portable USB
storage device is the perfect data management system for uploading, downloading, storing and
transferring your data. With its shock-resistant design, huge storage capacity and real-world
transfer speeds up to 10X faster than USB 2.0 (in USB 3.0 mode), the compact SSD18C3 is ideal
for carrying your files, folders, documents, photos, music and videos. In addition, the SSD18C3
comes with very useful software* that can turbo-charge file transfers and increase your mobile
productivity. This User’s Manual is designed to help you get the most from your new device.
Please read it in detail before using the SSD18C3.
*The SSD18C3 comes bundled with Backup Manager, which enables the SSD’s One Touch backup function and also
includes a USB device driver that enhances file transfer speeds by up to 30%. A free download of Transcend’s JetFlash
Elite data-management software is also included (www.transcend.com.tw/downloads).
Package Contents
The SSD18C3 package includes the following items:
USB 3.0 Portable Solid State Drive
USB 3.0 Cable
Quick Start Guide

2
Warranty Card
Features
SuperSpeed USB 3.0 and USB 2.0 connection options
Faster and more durable than USB 2.0 portable hard drives
Shock/slip-resistant silicone outer shell
Connection bandwidth up to 5Gbits per second
Up to 30% quicker file transfers with optional driver installation
Extra-large storage capacity
Sleek ultra portable design
USB powered – no external adapter necessary
One Touch Auto-Backup button
Dual-color LED indicator (power, data transfer, & USB 2.0/3.0 connection type)
Includes a free download of JetFlash Elite
System Requirements
Desktop or notebook computer with a working USB port.
One of following Operating Systems:
• Windows

XP
• Windows

Vista (32bit or 64 bit, latest Service Packs recommended)
• Windows

7 (32bit or 64 bit, latest Service Packs recommended)
• Linux

Kernel 2.6.31 or later
• Mac

OS X 10.4 or later (only USB 2.0 currently supported)

3
Safety Precautions
These usage and safety guidelines are IMPORTANT! Please follow them carefully.
General Use
• Carefully unpack the contents of the SSD18C3 package.
• During operation, avoid exposing your SSD18C3 to extreme temperatures above 70℃,
or below 0℃.
• Do not drop your SSD18C3.
• Do not allow your SSD18C3 to come in contact with water or any other liquids.
• Do not use a damp/wet cloth to wipe or clean the exterior case.
oDo not store your SSD18C3 in any of the following environments: Direct
sunlight
oNext to an air conditioner, electric heater or other heat sources
oIn a closed car that is in direct sunlight
oIn an area with strong magnetic fields or excessive vibration
• If your Windows computer will not boot while the SSD18C3 is connected, please
disconnect the SSD18C3 to your computer first and connect the SSD18C3 after starting
Windows. Otherwise, refer to your computer's manual and change the BIOS settings to
instruct the computer to boot from a different device.
Backing up Data
• Transcend does NOT take any responsibility for data loss, or damage during
operation. If you decide to store data on your SSD18C3 we strongly advise that you
regularly backup the data to a computer, or other storage medium.
• To ensure Super-Speed USB 3.0 data transfer rates when using your SSD18C3, please
make sure that your computer has the relevant drivers and hardware to support USB 3.0.
If you are unsure about how to check this, please consult the user’s manual of your
computer, motherboard, or USB 3.0 interface card for USB 3.0 driver information.
Transporting
• Do not pack the SSD18C3 into luggage without proper padded support. Other items in
your luggage may damage the SSD during travel if it does not have proper protection.
• Avoid squeezing or compressing the SSD18C3.
• Do not place objects on top of your SSD18C3.
Power
• The SSD18C3 gets its power directly from your computer’s USB port. However, the
power supplied by the USB ports on some older computers does not meet the stable 5V
DC power requirements of the SSD18C3. If your SSD18C3 does not function properly
upon connecting it to your computer, please plug BOTH ENDS of the USB 3.0 Y-cable
into your computer.

4
Both ends of the USB 3.0 Y-cable should be
connected to provide ample power to the
SSD18C3
• Use only the USB 3.0 Y-cable that came with the SSD18C3 to connect it to a computer,
and always ensure that the cable you are using is in good condition. NEVER use a cable
that is frayed or damaged.
• Ensure nothing is resting on the USB cable and that the cable is not located where it can
be tripped over or stepped on.
Reminders
Always follow the procedures in the “Disconnecting from a Computer” section to remove the
SSD18C3 from your computer.

5
Product Overview
A
Micro USB 3.0 Port
B
One Touch Auto-Backup Button

6
Connecting to a Computer
The SSD18C3 can be connected to your computer using either USB 2.0 or USB 3.0. To get the
best performance results from your SSD, we recommend using the USB 3.0 interface (currently not
supported on Mac computers).
1. Plug the micro USB end (1) of the USB cable into the SSD.
2. Plug BOTH large ends (2) and (3) of the USB cable into an available USB 2.0 or USB 3.0 port
on your desktop or notebook computer.
NOTE:Always plug both large ends of the Y-cable into your computer. If only one
USB port is available, please connect the data transfer end (2) of the Y-cable
(compatibility not guaranteed).
3. When the SSD18C3 is successfully connected to a computer, its LED will light up (USB2.0 and
USB 3.0 have different colors of illumination to indicate connection type). In Windows, a new
Local Disk drive with a newly-assigned drive letter will appear, and a Removable Hardware
Power
Connector
Micro USB 3.0
Connector
USB 2.0 / 3.0
Connector
USB 3.0 Cable
SSD18C3 Micro USB port USB 2.0 Port USB 3.0 Port

7
icon will appear on the Windows System Tray. The SSD18C3 comes pre-formatted to
FAT32, which is compatible with most computer systems, including Windows, Mac, Linux, and
more.
•Computers running Windows and Mac OS will automatically detect and install the SSD18C3. To use
USB 3.0, please ensure your computer has all necessary USB 3.0 drivers installed, and make sure you
plug the USB Cable into the correct port on your computer (USB 3.0 ports are usually color-coded to
differentiate them from USB 2.0)
• Linux users may have to configure the SSD18C3 manually. To do this, first create a directory for the
SSD18C3 (Example: mkdir /mnt/usbdrive). Then, mount the SSD18C3 (Example: mount –a –t msdos
/dev/sda1 /mnt/usbdrive)

8
Note: (D:) and (G:) above are example drive letters; the letter in your "My Computer" window may differ
Note: “New Volume” is an example drive. The drive name on your Mac computer may differ
4. Once connected, you can use the SSD18C3 as an external hard drive to transfer data to and
from your computer. Simply drag and drop files or folders onto the Local Disk,Volume,or
drive letter that represents the SSD18C3.