Travis Industries 564 User manual

564 Grill Installation
SKU # 96200804, 96200808
Page 1 of 2 3/26/15 © Travis Ind. 17601466
NOTE: The glass frame and barrier screen should be in place before installing the grills.
Upper Grill Installation (FPX and Avalon)
Hold the grill at an angle and insert the
lower slot over the lower bushing on
the fireplace (both sides). The grill fits
inside the tabs for the barrier screen.
Swing the grill upwards to engage the upper slot. You
will need to lift the grill slightly to get it over the bushing.
Once in place the grill is held in place by gravity.
Lower Grill Installation
Hold the grill at an angle and insert the lower
slot over the bushing on the fireplace (both
sides). You may need to press on the grill to
get the tab over the bushing (this prevents
the grill from accidentally falling off).
Bend the tab outward on
both sides. This is the
end-stop for the lower grill,
it allows the grill to swing
forward.
Swing the grill upwards to engage the upper slot.
The grill fits inside the tabs for the barrier screen.
You will need to lift the grill slightly to get it over the
bushing. Once in place the grill is held in place by
gravity.
NOTE: The upper grill is difficult to install the first time - be
patient, after you install it, you will know how it installs and it
will be much easier the second time.
SIDE VIEW


Position the grill
so the slots on
the grill align with
the mounting
studs.
You may need to
push in and
upwards on the
grill as it inserts.
The grill, when
fully inserted,
will slide down
and "click" into
place.
Upper Grill
Heat Shields
(on fireplace)
Mounting Stud


Upper Grill Installation (Lopi)

564 Grill Installation
SKU # 96200804, 96200808
Page 2 of 2 3/26/15 © Travis Ind. 17601466
FPX GRILLS ONLY:
Remove the glass barrier screen (see owner's manual for details). Secure the arch cover to the barrier following
the directions below (arch cover is shipped with the fireplace). Replace the glass barrier.
Lift the barrier up, pivot the top forward,
and remove from the fireplace.
Arch Cover Bend the tabs over to
secure the arch cover to
the barrier.