TRENDnet DSLR-2000G User manual

i
DSLR-2000G
802.11g WLAN ADSL2+ Router
User’s Manual

ii
Regulatory notes and statements
Wireless LAN, Health and Authorization for use
Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these
emissions however are far much less than the electromagnetic energy emissions from wireless devices like for
example mobile phones. Wireless LAN devices are safe for use frequency safety standards and
recommendations. The use of Wireless LAN devices may be restricted in some situations or environments for
example:
·Onboard airplanes, or
·In an explosive environment, or
·In case the interference risk to other devices or services is perceived or identified as harmful
In case the policy regarding the use of Wireless LAN devices in specific organizations or environments (e.g.
airports, hospitals, chemical/oil/gas industrial plants, private buildings etc.) is not clear, please ask for
authorization to use these devices prior to operating the equipment.
Regulatory Information/disclaimers
Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in
the user documentation provided with the product. Any changes or modifications made to this device that are
not exclickly approved by the manufacturer may void the user’s authority to operate the equipment. The
Manufacturer is not responsible for any radio or television interference caused by unauthorized modification of
this device, of the substitution or attachment. Manufacturer and its authorized resellers or distributors will
assume no liability for any damage or violation of government regulations arising from failing to comply with
these guidelines.
FCC statement
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at
the factory to match the intended destination. The firmware setting is not accessible by the end user.

iii
PART 68 statement
This equipment complies with Part 68 of FCC Rules and the requirements adopted by the ACTA.. On the bass unit of this equipment
is a label that contains, among other information, a product identifier in the format US: CAMDL01BDSLR2000G. If requested, this
number must be provided to the telephone company. The REN for this product is part of the product identifier that has the format US:
CAMDL01BDSLR2000G. The digits represented by 01 are the REN without a decimal point.
The REN is useful to determine the quantity of devices you may connect to your telephone line and still have those devices ring when
your telephone number is called. In most, but not all areas, the sum of the REN of all devices connected to one line should not exceed
five (5.0). To be certain of the number of devices you may connect to your line, as determined by the REN, you should contact your
local telephone company to determine the maximum REN for your calling area.
If your equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily. If
possible, they will notify you in advance. If advance notice is not practical, you will be notified as soon as possible. You will be
informed of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment,
operations or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance to give
you an opportunity to maintain uninterrupted telephone service.
If you experience trouble with this telephone equipment, please contact the following address and phone number for information on
obtaining service or repairs:
The telephone company may ask that you disconnect this equipment from the network until the problem has been corrected or until
you are sure that the equipment is not malfunctioning.
This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state
tariffs.
Contact information for service center in case of problems as below:
Company: TRENDware International, Inc.
Address: 20675 Manhattan Place Torrance, CA 90501 USA
Tel no.:310-961-5500
CE statement
Europe – EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been
applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:
EN60950-1: 2006
Safety of Information Technology Equipment
EN 50385: 2002
Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication
systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields
(110MHz - 40 GHz) - General public
EN 300 328 V1.7.1 (2006-10)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment
operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements
under article 3.2 of the R&TTE Directive
EN 301 489-1 V1.8.1 (2008-04)
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio
equipment and services; Part 1: Common technical requirements
EN 301 489-17 V1.3.2 (2008-04)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio
equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems , 5 GHz high performance RLAN
equipment and 5,8GHz Broadband Data Transmitting Systems.
This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries,
except in France and Italy where restrictive use applies.
In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device
for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services.

iv
This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10
mW EIRP in the frequency range of 2454 – 2483.5 MHz. For detailed information the end-user should contact the national spectrum
authority in France.
Česky [Czech] [Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shoděse základními požadavky a dalšími
příslušnými ustanoveními směrnice 1999/5/ES.
Dansk [Danish] Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets typebetegnelse] overholder de
væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Deutsch [German] Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in Übereinstimmung mit den
grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Eesti [Estonian] Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tüüp = type of equipment]
vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
English Hereby, [name of manufacturer], declares that this [type of equipment] is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Español [Spanish] Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los requisitos
esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ [name of manufacturer] ∆ΗΛΩΝΕΙ ΟΤΙ [type of equipment] ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ
ΤΙΣ ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 1999/5/ΕΚ.
Français [French] Par la présente [nom du fabricant] déclare que l'appareil [type d'appareil] est conforme aux exigences
essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Italiano [Italian] Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai requisiti
essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski [Latvian] Ar šo [name of manufacturer / izgatavotāja nosaukums] deklarē, ka [type of equipment / iekārtas tips] atbilst
Direktīvas 1999/5/EK b tiskajām prasībām un citiem ar to saistītajiem noteikumiem.
Lietuvių[Lithuanian]
Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus ir kitas
1999/5/EB Direktyvos nuostatas.
Nederlands [Dutch] Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de
essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Malti [Maltese] Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-ħtiġijiet essenzjali u
ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Magyar [Hungarian] Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó alapvetõ követelményeknek és az
1999/5/EC irányelv egyéb elõírásainak.
Polski [Polish] Niniejszym [nazwa producenta] oświadcza, że [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz
pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Português [Portuguese]
[Nome do fabricante] declara que este [tipo de equipamento] está conforme com os requisitos essenciais e outras
disposições da Directiva 1999/5/CE.
Slovensko [Slovenian]
[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi
določili direktive 1999/5/ES.
Slovensky [Slovak] [Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] spĺňa základné požiadavky a všetky príslušné ustanovenia
Smernice 1999/5/ES.
Suomi [Finnish] [Valmistaja = manufacturer] vakuuttaa täten että [type of equipment = laitteen tyyppimerkintä] tyyppinen laite
on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Svenska [Swedish] Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse med de väsentliga egenskapskrav
och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
0560

v
TABLE OF CONTENT
A BOUT T HIS G UIDE ....................................................................................1
Purpose.................................................................................................................................................................................................. 1
Terms/Usage......................................................................................................................................................................................... 1
Overview of this User’s Guide.............................................................................................................................................................. 1
I NTRODUCTION ...........................................................................................2
Applications:......................................................................................................................................................................................... 2
Supported Features: .............................................................................................................................................................................. 2
U NPACKING AND S ETUP .............................................................................4
Unpacking............................................................................................................................................................................................. 4
Setup ..................................................................................................................................................................................................... 4
H ARDWARE I NSTALLATION ........................................................................5
Front Panel............................................................................................................................................................................................ 5
LED Indicators...................................................................................................................................................................................... 5
Rear Panel............................................................................................................................................................................................. 6
Hardware connections........................................................................................................................................................................... 7
Connecting the WLAN ADSL Router.............................................................................................................................................. 7
Check the installation........................................................................................................................................................................ 7
PC N ETWORK TCP/IP S ETTING .................................................................8
Windows 95/98/ME.............................................................................................................................................................................. 8
Windows 2000...................................................................................................................................................................................... 9
Windows XP / Vista............................................................................................................................................................................ 10
C ONFIGURATION ......................................................................................11
Login to the WLAN ADSL Router through Wireless LAN................................................................................................................ 11
Login to the WLAN ADSL Router..................................................................................................................................................... 11
Using the Web Browser...................................................................................................................................................................... 11
Configuration Menu............................................................................................................................................................................ 13
S ETUP W IZARD .........................................................................................14
Step 1: Determine Connection Method............................................................................................................................................... 14
Step 2: ADSL Setting.......................................................................................................................................................................... 15
Step 3: Select Channel Mode.............................................................................................................................................................. 15
Step 4: Completed the Setup Wizard.................................................................................................................................................. 21
M ANUAL S ETINGS ....................................................................................22
Status................................................................................................................................................................................................... 22
Setup ................................................................................................................................................................................................... 22
Internet Setup.................................................................................................................................................................................. 22
LAN Setup...................................................................................................................................................................................... 24
Wireless .......................................................................................................................................................................................... 25
DHCP Settings................................................................................................................................................................................ 30
Time Zone....................................................................................................................................................................................... 32
Firewall – Used only on Router mode settings ................................................................................................................................... 33
IP/Port Filtering .............................................................................................................................................................................. 33
MAC Filtering................................................................................................................................................................................. 34
Port Forwarding.............................................................................................................................................................................. 35

vi
URL Blocking................................................................................................................................................................................. 37
Domain Blocking............................................................................................................................................................................ 38
Port Triggering................................................................................................................................................................................ 39
DMZ................................................................................................................................................................................................ 40
Advance – Used only on Router mode settings .................................................................................................................................. 41
Wireless .......................................................................................................................................................................................... 41
DNS Server..................................................................................................................................................................................... 45
Dynamic DNS................................................................................................................................................................................. 46
Bridging .......................................................................................................................................................................................... 47
Routing............................................................................................................................................................................................ 48
IGMP Proxy.................................................................................................................................................................................... 50
UPnP............................................................................................................................................................................................... 50
RIP.................................................................................................................................................................................................. 51
SNMP.............................................................................................................................................................................................. 52
Port Mapping .................................................................................................................................................................................. 53
IP QoS............................................................................................................................................................................................. 54
Remote Access................................................................................................................................................................................ 55
ATM Settings.................................................................................................................................................................................. 56
ADSL Settings................................................................................................................................................................................ 57
Maintainance....................................................................................................................................................................................... 59
Backup/Restore............................................................................................................................................................................... 59
Password......................................................................................................................................................................................... 59
Upgrade Firmware .......................................................................................................................................................................... 61
Access Controls .............................................................................................................................................................................. 62
TR-069 Config................................................................................................................................................................................ 63
Logout............................................................................................................................................................................................. 64
Diagnostic........................................................................................................................................................................................... 64
Ping................................................................................................................................................................................................. 64
ATM Loopback............................................................................................................................................................................... 66
ADSL.............................................................................................................................................................................................. 67
Diagnostic Test ............................................................................................................................................................................... 68
Monitoring .......................................................................................................................................................................................... 69
DHCP Clients.................................................................................................................................................................................. 69
Routing Table.................................................................................................................................................................................. 69
ARP Table....................................................................................................................................................................................... 70
Bridge FDB Table........................................................................................................................................................................... 70
Interface Statistics........................................................................................................................................................................... 71
ADSL Statistics............................................................................................................................................................................... 71
Mode................................................................................................................................................................................................... 72
Reboot................................................................................................................................................................................................. 73
T ECHNICAL S PECIFICATIONS ..................................................................74

1
ABOUT THIS GUIDE
Congratulations on your purchase of this IEEE 802.11b/g Wireless ADSL Router.
This integrated access device combines ADSL modem, Internet gateway functions
with wireless LAN and Fast Ethernet switch. It provides a complete solution for
Internet surfing and office resource sharing, and it is easy to configure and operate
for every user.
Purpose
This manual discusses how to install the IEEE 802.11b/g Wireless ADSL Router.
Terms/Usage
In this guide, the term “the WLAN ADSL Router” refers to your IEEE 802.11b/g
Wireless ADSL Router.
Overview of this User’s Guide
Introduction. Describes the IEEE 802.11b/g Wireless ADSL Router and its
features.
Unpacking and Setup. Helps you get started with the basic installation of the IEEE
802.11b/g Wireless ADSL Router.
Identifying External Components. Describes the front panel, rear panel and LED
indicators of the IEEE 802.11b/g Wireless ADSL Router.
Connecting the WLAN ADSL Router. Tells how you can connect the IEEE
802.11b/g Wireless ADSL Router.
Technical Specifications. Lists the technical (general, physical and environmental,
performance and Routers settings) specifications of the IEEE 802.11b/g Wireless
ADSL Router.

2
INTRODUCTION
The wireless router is a high-speed ADSL2+ Ethernet/Wireless router that is
specifically designed to connect to the Internet and to directly connect to your local
area network (LAN) via high-speed 10/100 Mbps Ethernet, or wireless LAN
(WLAN). The ADSL2+ modem is compatible with the latest ADSL standards,
including ADSL2 and ADSL2+, and supports up to 24 Mbps downstream and 1.5
Mbps upstream to deliver true broadband speed and throughput. The DSL router
supports wireless 802.11b/g and the following security protocols: WEP, WPA, and
WPA2, and 802.1x. To ensure fully compatibility, the DSL device was tested with
all major DSLAMs, and support standard 10/100 Mbps Base-T Ethernet interface
Auto MDI/MDIx 10/100 Switch function allowing user easily to link to PC or other
Switches/Hubs. The DSL device is an idea solution for multi-users utilizing build-
in channel mode (PPPoE/A, IPoA, IPoE), IP routing, NAT functionalities sharing
the ADSL link. The DSL device is also a perfect solution for the residential users, it
supports the users with bridge mode in host based PPPoE Client.
Applications:
Broadband Internet access:
Several computers can share one high-speed broadband connection through
wireless or wired (WLAN, LAN and WAN-Internet).
Resource sharing:
Share resources such as printers, scanners and other peripherals.
File sharing:
Exchange data, messages, and distribute files thus making good use of hard disk
space.
Online gaming:
Through the local area network, online gaming and e-commerce services can be
easily setup.
Firewall:
A built-in firewall function — for security and anti-hacking systems.
Supported Features:
Built-in ADSL Modem. The Wireless ADSL Router has a built-in ADSL
modem, supporting all common ADSL connections
PPPoE, PPPoA, 1483 Bridged, 1483 MER, 1483 Routed and 1577 Routed. The
Wireless ADSL Router supports all common connection methods

3
Auto-detection of Internet Connection Method. In most situations, the Wireless
ADSL Router can test your ADSL and Internet connection to determine the
connection method used by ISP
Supports ADSL standards for ITU-T G.992.1(G.dmt), ANSI T1.413 Issue 2,
G.992.2 (G.lite), ADSL2 G.dmt.bis (G.992.3), ADSL2+ (G.992.5)
Wi-Fi compliant with IEEE 802.11g and IEEE 802.11b standards
4 x 10/100Mbps Auto-MDIX LAN port and 1 x 10/100Mbps WAN port
(Internet)
High-speed up to 54Mbps data rate using wireless IEEE 802.11g connection
One 2dBi dipole external antenna supports high speed performance and great
coverage
Firewall features for IP/Port filtering, MAC filtering, Port forwarding, URL
blocking, Domain blocking, Port triggering and DMZ
Support Wi-Fi Protected Setup (WPS) for easy connection
Easy management via web browser and remote management
Supports 64/128-bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK
Works with Windows 95/98/NT/2000/XP/2003 Server/Vista, Linux and Mac
OS
Coverage up to 30 meters (330ft.) indoor;(depends on the environment)
Coverage up to 100 meters (980ft.) outdoor;(depends on the environment)

4
UNPACKING AND SETUP
This chapter provides unpacking and setup information for the IEEE 802.11b/g
Wireless ADSL Router.
Unpacking
Open the box of the WLAN ADSL Router and carefully unpack it. The box should
contain the following items:
 TEW-436BRM Wireless ADSL Router
 CD-Rom (User’s Guide)
 External power adapter
 1 1.5m (5ft) Cat.5 Ethernet Cable
 1 RJ-11 (ADSL) cable
If any item is found missing or damaged, please contact your local reseller for
replacement.
Setup
The setup of the WLAN ADSL Router can be performed properly using the
following methods:
 The power outlet should be within 1.82 meters (6 feet) of the Broadband Router.
 Visually inspect the DC power jack and make sure that it is fully secured to the
power adapter.
 Make sure that there is proper heat dissipation and adequate ventilation around
the WLAN ADSL Router. Do not place heavy objects on the WLAN ADSL
Router.
 Fix the direction of the antenna. Try to place the WLAN ADSL Router in a
position that can best cover your wireless network. Normally, the higher you
place the antenna, the better the performance will be. The antenna’s position
enhances the receiving sensitivity.

5
HARDWARE INSTALLATION
Front Panel
The figure below shows the front panel of the IEEE 802.11b/g Wireless ADSL
Router.
Front Panel
LED Indicators
LED Color State Description
Green Solid on Power on, normal operation.
Red Solid on Power on, self-test failed, indicating device
malfunction.
Power
Off Power off.
Blinking Pending ADSL line synchronization.
DSL Green Solid on ADSL line synchronized.
Blinking Internet activity.
Green Solid on Internet connectivity, no activity.
Red Solid on Internet connection setup failed.
Internet
Off No Internet connection.
Blinking Ethernet activity.
Green Solid on Ethernet connection, no activity.
LAN 1~4 Off No Ethernet connection.
Blinking Wireless activity.
Green Solid on Wireless connection, no activity.
WLAN Off Wireless disabled.
Blinking WPS in progress.
Green Solid on WPS success.
Red Solid on WPS fail.
WPS
Off WPS disabled.

6
Rear Panel
The figure below shows the rear panel of the IEEE 802.11b/g Wireless ADSL
Router.
Rear Panel
Antenna
One 2dBi gain antenna for wireless connection.
LAN (1-4)
Four RJ-45 10/100Mbps Auto-MDIX ports for connecting to either 10Mbps or
100Mbps Ethernet connections.
DSL (ADSL Port)
Connect to an active telephone line (RJ-11).
DC IN
Receptor for the supplied power adapter.
ON/OFF (On/Off Switch)
Press this button to turn the unit on or off.
WPS Button
Press to enable Wi-Fi Protected Setup.
RESET
Holding the Reset button for 5 seconds restores the WLAN ADSL Router to its
original factory default settings.

7
Hardware connections
Connecting the WLAN ADSL Router
1. Connect ADSL Cable
Connect the supplied RJ-11 ADSL cable from to the DSL port on the Wireless
ADSL Router (the RJ11 connector) to the ADSL terminator provided by your
phone company.
2. Connect LAN Cables
Use standard LAN cables to connect PCs to the LAN ports on the Wireless
ADSL Router.
3. Connect Power
Connect the supplied power adapter to the Wireless ADSL Router. Use only the
power adapter provided. Using a different one may cause hardware damage.
Check the installation
The LEDs on the WLAN ADSL Router are clearly visible and the status of the
network link can be seen instantly:
1. With the power source on, once the device is connected to the phone line and
PCs, the Power, LAN, WLAN and DSL, INETRNET LEDs of the WLAN
ADSL Router will light up indicating a normal status.
2. When the ADSL line is connected the DSL LED will light up.
3. When the Internet is connected the INTERNET LED will light up. (Need to
configuration)

8
PC NETWORK TCP/IP SETTING
The network TCP/IP settings differ based on the computer’s operating system
(Win95/98/ME/NT/2000/XP/Vista) and are as follows.
Windows 95/98/ME
1. Click on the “Network neighborhood” icon found on the desktop.
2. Click the right mouse button and a context menu will be show.
3. Select “Properties” to enter the TCP/IP setting screen.
4. Select “Obtain an IP address automatically” on the “IP address” field.
5. Select “Disable DNS” in the “DNS” field.

9
6. Select “None” for the “Gateway address” field.
Windows 2000
Double click on the “My Computer” icon on the desktop. When “My Computer”
window opens, open the “Control Panel” and then open the “Network dialup
connection” applet. Double click on the “Local area network connection” icon.
Select “Properties” to enter the TCP/IP setting window.
1. In the “Local area network status” window, click on “Properties.”
2. In the “Local area network connection” window, first select TCP/IP setting
and then select “Properties.”
3. Set both “IP address” and “DNS” to Automatic configuration.

10
Windows XP / Vista
Point the cursor and click the right button on the “My Network Place” icon.
Select “properties” to enter the TCP/IP setting window.
1. Set “IP address” to “Obtain an IP address automatically.”
2. Set “DNS” to “Obtain DNS server address automatically.”

11
CONFIGURATION
First make sure that the network connections are functioning normally.
This WLAN Router can be configured using Internet Explorer 5.0 or newer web
browser versions.
Login to the WLAN ADSL Router through Wireless LAN
Before configuring the WLAN ADSL Router through WLAN, make sure that the
SSID, Channel and the WEP is set properly.
The default setting of the WLAN ADSL Router that you will use:
SSID: TRENDnet436
Channel: Auto
802.11 Mode: 802.11b+g mixed mode
Security: disable
IP Address: 192.168.10.1
VPI/VCI for ATM: 5/35
ADSL Line mode: Auto-detect
Login to the WLAN ADSL Router
Before you configure this device, note that when the WLAN ADSL Router, make
sure the host PC must be set on the IP subnet that can be accessed by the
xDSL/Cable modem. For example, when the default network address of the
xDSL/Cable modem Ethernet interface is 192.168.10.x, then the host PC should be
set at 192.168.10.xxx (where xxx is a number between 2 and 254), and the default
subnet mask is 255.255.255.0.
Using the Web Browser
1. Open Internet Explorer 6.0 or above Internet browser.
2. Enter IP address http://192.168.10.1 (the factory-default IP address setting) to
the URL web address location.
3. When the following dialog box appears, enter the user name and password to
login to the main configuration window, the default username and password is
“admin”.

12
After entering the user name and password, the main page comes up, the screen will
display the WLAN ADSL Router status.

13
Configuration Menu
When the main page appears, find the Configuration menu in the left side of the
screen. Click on the setup item that you want to configure. There are ten options:
Setup Wizard, Status, Setup, Firewall (form router mode only), Advance (form
router mode only), Maintenance, Diagnostic, Monitoring, Mode and Reboot as
shown in the Configuration Menu screen.
Configure menu on Router mode Configure menu on Modem mode

14
SETUP WIZARD
Setup wizard is provided as part of the web configuration utility. User can simply
follow the step-by-step process to get the WLAN ADSL Router configuration ready
by clicking on` the “Wizard” button on the function menu. The following screen
will appear.
Step 1: Determine Connection Method
Choose “Auto-detect” for auto detect the Internet connection method or “Manual
Selection” for manually configure the ADSL setting.
Auto-detect
Selected the “Auto-detect” then click “Next” button, the wizard will automatically
detect the first usable PVC and automatically detect PPPoE, PPPoA, and Bridge
Protocol (with DHCP Server available)
Manual Selection
Selected the “Manual Selection” then click “Next” button, the wizard will setting
the Internet connection manually.